Loading…
Loading…
Tender ID
Tender Value
₹41.2 L
EMD Value
₹4.1 L
Closing Date
5 May 2026, 12:00 pmClosed
SE BASTI CIRCLE PWD BASTI
SE BASTI CIRCLE PWD BASTI
Renewal of Mehndawal Visauva road from Km 03 of Dadiya to Jabbar via Dadra Link Road
2026_CEUBZ_1124755_8
758/4E-NIVIDA-BASTI CIRCLE/25-26 DATED-03-02-2026
Open Tender
Civil Works
Percentage
120 days
BASTI
AS PER MBD
2 documents required · 2 mandatory
₹2,714
Yes
₹4.1 L
Yes
SE BASTI CIRCLE PWD BASTI
28 Apr 2026
28 Apr 2026
5 May 2026
28 Apr 2026
5 May 2026
28 Apr 2026
28 Apr 2026 - 5 May 2026
30 Apr 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | WBM G-3
Providing Laying spreading and compacting stone aggregates of 53-22.4 mm size material to water bound macadam specification including spreading in uniform thickness, hand packing rolling with Smooth wheel roller 80-100 KN in stages to proper grade and camber applying and brooming Stone screening grit to fill up the interstices of coarse aggregate watering and compacting to the required density grading 3 as per Technical specification clause 405. as per Technical Specification Complete in all aspects or as per direction of E/I (Rates are Excluding G.S.T but Including All Taxes Royalty, Labour cess, Material & T&P). | 45 | Cum | 5,500 | ₹2,47,500 |
| 2 | Tack Coat-
Providing and applying tack coat with Bitumen VG-10 using bitumen distributor at the rate of 3.00 kg/10 sqm on the prepared bituminous surface Cleaned with Hydraulic broom as per Technical Specification Clause 503..as per Technical Specification Complete in all aspects or as per direction of E/l (Rates are Excluding G.S.T but Including All Taxes Royalty, Labour cess, Material & T&P.) | 12,000 | Sqm | 16 | ₹1,92,000 |
| 3 | Premix Carpet-
Providing, laying and rolling of open - graded premix surfacing of 20 mm thickness composed of 13.2 mm to 5.6 mm aggregates using Viscocity grade bitumen to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable hot mix plant of appropriate capacity not less than 200 tonnes/hour, laying and rolling with a smooth wheeled roller, finished to required level and grades. as per Technical Specification Complete in all aspects or as per direction of E/I (Rates are Excluding G.S.T but Including All Taxes Royalty, Labour cess, Material & T&P.) | 12,000 | Sqm | 214 | ₹25,68,000 |
| 4 | Seal Coat-
Providing and laying of premix sand seal coat with HMP of appropriate capacity not less than 200 tonnes/ hours using crushed stone chipping 6.7 mm size and penetration bitumen of suitable grade. Complete in all aspects or as per direction of E/A (Rates are Excluding G.S.T but Including All Taxes Royalty, Labour cess, Materini & T&P.) | 12,000 | Sqm | 65 | ₹7,80,000 |
| 5 | Construction of subgrade and earthen shoulders with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of Table 300.2 with lead upto 1000 m as per Technical Specification Clause 303.1. Embankment work. Technical Specification Complete in all aspects or as per direction of E/I (Rates are Excluding G.S.T but Including All Taxes Royalty, Labour cess, Material & T&P). | 600 | Cum | 74 | ₹44,400 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.72 MB
BOQ_2134900.xls
BOQ • 0.42 MB
T2.pdf
Tender Documents • 2.85 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .