Maintenance and Repair works EMG Dispensary in ward no52

Amount

Earth work excavation for foundation in Hard stiff clay, stiff black cotton, hard red earth, shales murram, gravel,stoney earth and earth mixed with small size boulders SS.20B and Sand, silt or other loose soil, wet sand,or silt not under water, light black cotton soil, sandy loam ordinary soil and to full depth as may be directed except in hardrock requiring blasting inclusive of shoring shuttering and baling out water and cleaning and levelling the site etc.,complete 10 cum

Supplying and filling in foundation and basement with P- sand in layers of not more than 15cm thick well rammed watered and compacted etc., complete complying with standard specification.

Plain Cement Concrete 1:4:8 (one cement four fine aggregates and eight coarse aggregates) using 40mm size ISS HBG metal including cost and conveyance of all materials to site and including for the mixing, laying and labour charges and all incidential charges such as water providing etc., complete as per standard specification

Suppling and erecting shuttering with necessary supports for plinth beam with all cross bracing etc. complete (RCC column, footing, plinth beam and lintel sides)

Reinforced Cement Concrete 1:11/2:3 using 20mm hard broken gauge granite jelly for foundation including consolidation and dewatering for foundation wherever necessary etc. complete

Supplying fabricating and placing in position of MS grill for reinforcement rate including the cost of steel for all works, binding wire etc.

Brick work in cm 1:5 (one cement five sand) using 2nd class bricks in foundation and basement.

White washing two coats with best lime stone including gum and cungee water etc. complete

Painting Old Wall Surface with One coat of Plastic Emulsion paint of approved quality including cleaning of plaster surface with soap soda and water by manual labour

Painting Old Wood work with Two coat for doors, windows, ventilators of Synthetic Enamal paint over a priming coat including cost of primer etc., complete

Picking the existing Cement Plastering surface etc.

Plastering with CM 1:5(one cement five sand)12mm thick.

Finishing the top of weathering course with one course of pressed tiles 20cm x 20cm x 2cm size laid in CM 1:3 (One cement and three sand) mixed with crude oil 10% by weight of cement used and pointing the same oil mortar etc. Complete 10m2 SI No.27

Removing the existing Fully Damaged Paver block M40 Grade 80mm thick & 60mm thick in the rate including Removing and Stock to the same site and tranporting loading unloading and labour charges and other tools etc. complete as per Standard Specification

Supplying and filling in foundation and basement with Well Gravel in layers of not more than 15cm thick well rammed watered and compacted etc., complete complying with standard specification.

Refixing the existing paver block road etc complete

Supply, delivery & fixing of HDPF tank of 1000 lit capacity as per ISI 2701/1996 including loading,unloading,transportation and labour charges for fixing of the GI pipes and specials for pipe connection works including cutting,threading and fixing charges etc.,complete

Supplying and Fixing Solid PVC Door Shutters using 19 Gauge 19mm MS square tubes for styles and outer frames. 15mm MS square tubes for top, lock and bottom rails. The steel tubes shall be covered with 5mm thick solid PVC Sheets. Shutter using 5mm thick solid PVC Sheets for panelling shall rigidly fixed in position including necessary furniture and fittings. The over all size of styles shall be 50mm x 30mm. The over all size of top rail, lock rail and bottom rail shall be 75mm x 30mm. The over all size of frames shall be 50mm x 45mm with suitable rabate for housing the shutter

Fabriction supply and erection of tobulor post with Truss (100mm, 80mm, 75mm) The Rate shall be include the cost of tobulor post Truss members, labour charges for manufacturing and erection and Painting etc., complete. as per departmental specification and drawings.

Fabricating supplying and fixing of Pre painted galvanized iron sheets with the following specification the materials should be of PPGI tile profile with a red colour or any other approved design 0.47mm thick 24guage having with 1050mm the sheet should be G.I base pre printed hot dipped galvanized iron sheets and to be fixed with self tapping screws, plastic washer the washer and screws to be fixed by using minute power machine drilled with out damaging the sheets paint coating to be regular modified polyster coat with zinc xoating of z 120 GSM paint thickness the finish manglore tiles finish optional matt finish the sheet to be fixed with making suitable corrugated, cutting the sheet in to the required size and making oranmental designs as per the site condition and directed by the departmental officers.

Supplying and fixing in position of alulminium anodised colour matt finish Louvered Ventilator. The outer frame will be 62x38x2mm @ 1.17 Kg / m and the louvers with moving arrangements will be madewith Alu. Channel of size 60x30x4 mm @ 1.27 kg /m with necessary glass pans for louvers 4mm thick Al.Clips, including all materials, labour & power consumption charges required for fabrication if necessary chipping dismantling making holes in RCCcolumns,beamsor masonry wherever necessarywith power drill to the extent required and make good to the original conditions after fixing etc., complete.The Aluminium sirface is to be anodised with matt finish under electrically controlled condition in accordance with ISI specification 1868/1962 of anodic film thickness of not less than15 microns(fifteen)

Wash Hand basin of size 550mm x 400mm with all accessories such as cast iron brackets, 32mm dia C.P Waste coupling, rubber plug and chain, 32mm dia 'B' Class G.I Waste pipe, 15mm dia G.M Wheel valve, 15mm dia nylon connection 15mm dia brass nipples, 15mm C.P.Pillar tap etc complete

Suplying and fixing in position white glazed Indian Water Closet of best Quality and approved make with 100mm 'P' os 'S' trap with Double flapped rigit P.V.C seat cover with C.P brass hindes with 12.5 litres PVC Low Level flushing tank with all internal fittings etc., complete complying with standard Specifications , labor inclusive of fixing lowlevel flushing tank

Supplying and Fixing of Tube light , copper choke with complete set

Supplying and fixing of 48” AC ceiling fan with 300mm down rod on the existing clamp with regulator with complete set

Add GST 18%

M MAHESHKANNAN