SPECIAL REPAIRS TO CERTAIN OTM ACCN

Amount

Taking down/dismantling loose/damage concrete including plaster of any description and in any position from RCC structures like chajja, fins, roof ceiling,louvers, parapet, column, beam, and of lintel by hammering with wooden mallets carefully chipping off the old concrete surface with necessary scaffolding including cutting of rusted reinforcement if so required and disposal of old debris to outside the premises complete all as specified and as directed.

Demolition of reinforced Concrete as in Roofs, floors (other than ground floors), beams, staircases, landing, and similar suspended work (reinforcement cut as required to facilitate demolition) with necessary scaffolding and protection as required complete all as specified and as directed.

Cleaning the existing surface of concrete and reinforcements as obtained after execution of item No. 1 & 2 here in before by wire brush including scrapping & cleaning with emery paper and washing down with water as required and applying “Solvent free epoxy concrete bonding agent” as per manufacturer’s instructions on old concrete surfaces for bonding with new concrete complete all as specified and as directed.

Applying two coats of “Epoxy zinc rich primer” as protective coat to expose surface of old and new reinforcement over 10 mm dia as per manufacturer's instructions complete all as specified and as directed.

All as per item No. 4 above but reinforcement upto 10mm dia. Note for item No 3 to 4: (i) Cost of chemical i.e. Solvant free epoxy, Epoxy zinc rich primer and cement shall be measured and paid separately under appropriate item . (ii) The work shall be carried out by the trained person as per manufacturer's instructions Make:- FOSROC/SIKA/ PIDILITE

Supply only epoxy zinc rich primer. Make : Nitozinc primer of FOSROC/Friazinc R of SIKA/ or equivalent in PIDILITE

Supply only Solvant free Epoxy concrete bonding agent. Make : Nitobond EP of FOSROC/Carbodur of SIKA/ or equivalent in PIDILITE

Material and labour for mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending lapping etc as required and welding with existing bar complete all as specified and as directed

Material and labour for mild steel TMT bars 6 to 8mm bar, cut to length, bent to shape required, including cranking, bending, lapping etc as required and welding with existing bar complete all as specified and as directed.

Material and labour for mild steel TMT deformed bar or twisted bars upto 10mm dia as in stirrups cut to lenth bent to shape required including cranking ,bending etc and lapping ,welding as directed to the existing one complete all as specified and as directed. Make for item Nos. 8 to 10:- Rinl / Sail / Tisco/JAI Balaji industries ltd / Shyam Steel industries Ltd. / SPS stell rolling mills ltd / SRMB Srijan Pvt Ltd / Electrosteel steels ltd / Shyammetallics and energy ltd / Jindal.

Material and labour for providing reinforced cement concrete (1:1½: 3) type A1 (using 20mm graded stone aggregate) as in chajja, facia, railing and parapet complete all as specified and as directed.

Material and labour for providing reinforced cement concrete (1:1½: 3) type A0 (using 12.5mm graded stone aggregate) mixed with integral water proofing liquid admixture as per manufactures instructions as in columns, pillars, piers, beams, posts and struts complete all as specified and as directed.

All as per item No. 12 above but in slab, landing, balcony and similar items.

Use and waste of formwork to sides of pillars, posts, struts, piers, columns and stanchions for rough finished concrete surfaces complete all as specified and as directed.

Use and waste of formwork to parapet, RCC wardrobe and similar items for rough finished concrete surfaces complete all as specified and as directed.

Use and waste of formwork to sides and soffits of chajja, troughs etc for rough finished concrete surfaces complete all as specified and as directed

Material and labour for 5 mm thick plastering in CM (1:3) on concrete surfaces as in sides of column, lintel, beam, chajja, facia, railing, RCC wardrobe etc including finish the surface even and fair without using extra cement complete all as specified and as directed

Taking down cement plaster of any description on brick walls including raking out joints, hacking for key, scrubbing down with water complete all as specified and directed.

Material and labour for 20mm thick plaster in cement mortar (1:4) in two layers, i.e 10mm thick in each layer, top layer mixed with integral water proofing liquid admixture as per manufacturers instruction on brick or concrete surfaces of wall finished the surface fair and even complete all as specified and as directed. Note :- WPC shall be measured and paid separately.

Supply only integral water proofing liquid admixture for concrete and mortar. Make :CONPLAST X421IC of Fosroc /SIKA No 1 of SIKA/equivalent brand of PIDILITE)

Material and labour for rendering 15mm thick in cement mortar (1:6) on fair faces of brickwork or concrete surfaces, finished the surface even and smooth without using extra cement complete all as specified and as directed.

All as per item no. 21 above but other than fair faces of brickwork.

Material and labour for 5 mm thick plastering in CM (1:3) on ceiling including finish the surface even and fair without using extra cement complete all as specified and as directed

Material and labour for preparation of new plastered surfaces of wall and applying three coats of white wash complete all as specified and as directed. Make for lime:- Suryacem / Lovelycem / Birla white.

All as per item No. 24 above but in ceiling.

Material and labour for complete removal of existing treatment on plastered surfaces of walls including washing, rubbing down and stopping of old treatement and applying two coats of cement base paint, first quality, over a coat of alkali resistant primer complete all as specified and as directed.

Material and labour for preparation of new plastered surfaces of wall and applying two coats of cement base paint, first quality, over a coat of alkali resistant primer complete all as specified and as directed.

Complete removal of existing treatment of wall including washing, rubbing down and stopping of old treatement and material and labour for applying birla wall care putty and appling two coats of oil bound distemper, first quality, over a coat of alkali resistant primer to wall complete all as specified and as directed.

M&L for applying wall care putty and appling two coats of oil bound distemper, first quality, over a coat of alkali resistant primer to wall to new plaster surface complete all as specified and as directed. Make for item Nos. 26 to 29:- asian / Berger / jenson & Nicholson / Shalimar.

Material and labour for preparation of old treated plastered surfaces of wall and applying one coat of white wash complete all as specified and as directed. Make for lime:- Suryacem / Lovelycem / Birla white.

All as per item No.30 above but in ceiling.

Material and labour for applying one coat of synthetic enamal paint , first quality,to wooden surface exceeding 10cm width or girth including preparation of old painted wooden surfaces complete all as specified and as directed.

Material and labour for applying one coat of synthetic enamal paint, first quality, on steel surface of any description over 10cm widht or girth including preparation of old painted surfaces complete all as specified and as directed.

Material and labour for applying two coats of synthetic enamel paint, First quality, over a coat of red oxide zinc chrome primer to new steel surface, not otherwise described, over 10cm width or girth including preparation of new surface complete all as specified and as directed.

Material and labour for two coats of synthetic enamel paint, first quality, over a coat of pink primer to new wooden surfaces of any description over 10cm width or girth including preparation of new surfaces complete all as specified and as directed. Make for item Nos. 32 to 35:- Asian / Berger / Jenson & Nicholson / Shalimar.

Taking out old unserviceable floor, hearth or wall tiling including cement mortar bedding (but not backing) and rubbish off the premises complete all as specified and as directed

M&L for 40mm thick cement concrete 1:2:4 type B-1 (using 20mm graded stone aggregate) and finishing the surface even and smooth without using extra cement in floor all as specified and directed.

Material and labour for non-skid coloured ceramic tiles 7 to 8 mm thick (squre or rectangle) area of each tile exceeding 0.06 Sqm but not exce 0.11 Sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour tiles over and including 15mm thick screed bed or bedding layer in cement mortar (1:6) for laying floor tiles complete all as specified and directed.

Material and labour for Non-skid ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but n.exc. 0.18 sqm as in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles over and including 15mm thick screed bed or bedding layer in CM(1:6) complete all as specified and as directed.

Material and labour for glazed ceramic colour tiles 300x450 x 7mm thick as in skirting/dados etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour tiles over and 10mm thick rendering in cement mortar 1:4 complete all as specified and directed. Make for item nos. 38 to 40:- Kajaria / Asian Granito / Somany / VamoraGranito / Nitco / Orient / Jhonson

Demolition of concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and as directed.

Material and labour for 75mm thick PCC 1:3:6 type C-2 (using 40mm graded aggregate) as in pavement/plinth protection,plinth protection shall be laid in alternate bays and joints shall be filled with bitumastic gola with 80/25 bitumen (1 part bitumen mixed with 3 part of sand) surface finished fair and even complete all as specified and as directed. Make for bitumene:- Tikitar / STP / Choksy chemicals.

Supply and fix in repair one pieced-white wash basin without pedestal 550 X 400 (oval/square pan) a/w brackets / MS nuts and bolts for fixing; fixed with and incl 32mm dia brass CP waste coupling and connecting waste pipe etc complete all as specified and directed.

Supply and fix in repair Vitreous china Urinal bowl type flat back , size 465 X 355 X 265mm white with grating and union for discharge pipe including providing and fixing plugs , bedding urinal against wall in CM 1:2 , securing urinal to plugs with and including 60 mm long brass screws , pointing around urinal back in cement complete all as specified and as directed . Make for item nos. 43 & 44:- NeycerKermag(standard) / Hindusthan Sanitary Ware (1st quality) / Parryware (superfine) / Cera (1st quality) / classica 1st /Standard) / Johnson Pedder. / Prayag

Supply and fix in repair 15mm PVC connection of length 600mm with PTMT nuts of superior quality complete all as specified and directed. Make:- M/S Prayag / Polytuf / M/S Sak Plast Pvt Ltd / Shakti Enterprises.

S&F CP Pillar taps 15 mm dia, cast copper alloy , with capstan heads, chromium plated , screwed down high pressure ,with long screwed shanks and fly-nuts , screwed for iron pipe and fixed in repairs.

Supply and fix in repair angular stop cock of 15mm bore fancy type, chromium plated with long shank and cup cast copper alloy, screwed down, high pressure, with crutch handle, screwed both ends for brass ferrule complete all as specified and directed. Make for item Nos. 46 & 47:- Parryware / Essco / Hindware / MarcRoca / Marc / Cera / Crabtree / BluestarMarc / Kohler / Grohe / Gem / Parko / ESS ESS / Lauret / Zoloto / M/S Plastocraft Sanitary ( India) Pvt Ltd ( Brand:- AGRANI./ M/SSomany ceramic Ltd. ( Ether) / Prayag / Shakti Enterprises.

Supply and fix in repair vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests including 'P'or 'S' trap (excluding flushing cistern and flush pipe) including provision of lime concrete bedding complete all as specified and as directed. Make:- NeycerKermag(standard) / Hindusthan Sanitary Ware (1st quality) / Parryware (superfine) / Cera (1st quality) / classica 1st /Standard) / Johnson Pedder. / Prayag

Supply and fix in repair 10 litre capacity PVC valve less, symphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets and flush pipe of polyethylene of low or high density or PVC. 32 mm dia for low level cistern including PVC connections 15mm size with PTMT nuts and washer both side of length 600mm cocomplete all as specified and directed. Make:- M/S Johnson Padder / Hindustan sanitary ware / Millennium / Cera / Blue Star Polymers (Speed Flow) / Commander (Water Bird) / Hindware(Sleek) / Parryware(Slimline) / Prayag / Shakti Enterprises.

Supply and fix in repair Rotational moulded polyethylene water storage tanks (tripled layer) 500 Ltrs capacity (Cylindrical vertical with closed top) hoisted and fixed in position complete all as specified and as directed. Make:- Rotex /sintex, Polywel / SPL /Polycon /Diplast /Nilkand / Oriplast/ Jindal Jaipur

Supply and fix in repairs grating doom 125mm dia of PTMT (Minimum wt 25 Gms) complete all as specified and directed. Make:- M/S Prayag / Polytuf / M/S Sak Plast Pvt Ltd / Shakti Enterprises.

Taking up or down 15mm dia steel tubing and connections, segregating serviceable pipe for reuse complete all as specified and directed.

All as per item No. 52 above but 20mm bore.

Supply and fix 15mm bore unplasticised PVC pipes of pressure rating 10 kgf/cm sq fixed to walls , ceiling or in floors etc complete all as specified and directed. Make:- Prayag /Polytuf / Supreme / Prince / Reliance / Jain pipes / Finolex. / Kisan / M/S Fusion Industries LTd

All as per item No 54 above but 20 mm outer dia.

Supply and fix in repair bib taps of 15mm bore fancy type, chromium plated cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for brass ferrule complete all as specified and directed.

Supply and fix in repair stop cock concealed type of 15mm bore fancy type, chromium plated with long shank and cup cast copper alloy, screwed down, high pressure, with crutch handle, screwed both ends for brass ferrule complete all as specified and directed. Make for item Nos. 56 & 57:- Parryware / Essco / Hindware / MarcRoca / Marc / Cera / Crabtree / BluestarMarc / Kohler / Grohe / Gem / Parko / ESS ESS / Lauret / Zoloto / M/S Plastocraft Sanitary ( India) Pvt Ltd ( Brand:- AGRANI./ M/SSomany ceramic Ltd. ( Ether) / Prayag / Shakti Enterprises.

Supply and fix in repair Shelf of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 300gms) complete all as specified and directed. Make:- M/S Prayag / Polytuf / M/S Sak Plast Pvt Ltd / Shakti Enterprises.

Supply and fix in repair brass chromium plated shower rose of 125mm size fixed in 15 mm dia pipe all as specified and directed. Make:- Parryware / Essco / Hindware / MarcRoca / Marc / Cera / Crabtree / BluestarMarc / Kohler / Grohe / Gem / Parko / ESS ESS / Lauret / Zoloto / M/S Plastocraft Sanitary ( India) Pvt Ltd ( Brand:- AGRANI./ M/SSomany ceramic Ltd. ( Ether) / Prayag / Shakti Enterprises.

Supply and fix in repair Shower Arm 15 mm size , 195 mm long with bend of 45 degree with flange of PTMT any colour ( Min weight 40 Gms ) complete all as specified . Make:- M/S Prayag / Polytuf / M/S Sak Plast Pvt Ltd / Shakti Enterprises.

Supply and fix in repair chromium plated towel rail of 20 mm dia, D type, 600mm long between flanges fixed with chromium plated brass screws and wooden/plastic cleats complete all as specified and directed. Make:- Kohler / Parryware / Grohe / Bluestar silver line / Shakti Enterprises..

Taking down chowkahts or frames with shutters (without taking off shutters from the frame) not exceeding 1.5 Sqm each complete all as specified and as directed.

Taking down chowkahts or frames with shutters (without taking off shutters from the frame) exceeding 1.5 Sqm but not exceeding 4 Sqm each complete all as specified and as directed.

Taking down shutters of any description exc 1 Sqm but not exc 2 Sqm each complete all as specified and directed.

Refixing of shutters of any description exceeding 1 Sqm each and not exceeding 2 Sqm with old serviceable builders hard ware articles / with new builders hard ware articles if any. (Old serviceable shutter obtained from item No 50 shall be reused).

Materials and labour for treating back of chowkhats etc with tar or coal tar black paint,first quality, area tarred exceeding 0.10 sqm but not exceeding 0.50 sqm each complete all as specified and as directed. Make:- asian / Berger / Jenson & Nicholson. / Shalimar.

Supply and fix 2nd class hard wood , plain, solid , straight chowkhats and frames, wrought, framed, rebated on the solid rounded or chamfered put together with glue pinned at joints complete all as specified and as directed. Specie:- Sal / Bijasal / Benteak / Laurel/Hollock ,Chikrassy/, Gamari/, badam /kalasiris.

Supply and fix 35mm thick 2nd class hard wood factory made plain framed panelled door shutters, (two panel) with lock rail and panel of 12mm veneered particle board with commercial veneered on both faces and rail and stiles as per IS 1003(Pt-I), kiln seasoned and chemically pressure treated etc. complete all as specified and as directed.

Supply and fix 35mm thick 2nd class Hard wood factory made glazed and skeleton door shutters, open rebated and prepared to received glass/gauge etc (without sash bars) edges of framing plain, chamfered or rounded and mitred , beads for securing glass etc the size of member of shutter as specified in SSR Part-I, clause 8.24 (a) complete all as specified and as directed. Specie for item Nos. 68 & 69:- Sal / Bijasal / Benteak / Laurel/Hollock ,Chikrassy/, Gamari/, badam /kalasiris. Make for item Nos. 38 & 69:- M/s Ambika timber Works, Bikna (Patel Nagar), P.O. Keshlakole, Bankura, W.B./ M/s Premier Wood Craft (P) Ltd., Jessore road, P.O. Ganganagar, Dist – 24 Parganas( West Bengal) / Door kings, Kolkata / Jain Doors PVT Ltd / M/s Supreme Doors and allied products.

Supply and fix solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube with EPDM gasket as per specification and drawing complete all as specified and as directed.

Supply and fix factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, as per specification and drawing complete all as specified and as directed.

Supply and fix factory made solid PVC moulded door shutter 28 to 30 mm thick (stiles)with 2,4 or 6 raised panel design with 2mm thick moulded PVC sheet on back face ,with particle board core ,supplying and fixing in frame at site as per specification and drawing . Make for item Nos. 70 to 72:- M/s Rajshri Plastiwood,/ Kumar Arch Tech Pvt Ltd, M/s Sintex India Ltd,/ HINDOPAN,/ Marino / Polyline.

Material and labour for PCC (1:3:6) type C1 (using 20mm graded stone aggregate) for fixing of hold fasts block and similar work including necessary form work complete all as specified & directed.

Supply and fix mild steel work as in hold fast or similar article conforming to Fe-410-0 or Fe-310-0 including tarring and sanding complete all as specified and as directed.

Supply and fix powder coated aluminium frame for doors, windows, ventilators with one or more rebates and openable window shutter frame including joining cleat for fixing etc complete all as specified and directed.

M&L Powder coated Anodised alminim window( glazed or gauged) and ventilator shutters, openable type without sash bar, aluminim section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified

Supply and fix powder coated anodised aluminium glass louver /ventilators with blades of 10mm heavy duty with lever handle etc complete all as specified and directed.(Note- Glass shall be measured and paid separately). Make for item Nos. 75 to 77:- Hindalco / Indalco / Jindal.

Supply and fix 100 mm size butt hinges, medium weight, stainless steel and fixed complete all as specified and as directed. Make:- Crown / Everlite / Godrej / Harrison / Mowjee/ Hardwin / Doorset. / Prayag.

Supply and fix 100 mm size butt hinges, medium weight, cold rolled mild steel, and fixed complete all as specified and as directed. Make:- Crown / Everlite / Godrej / Harrison / Mowjee/ Hardwin / Doorset..

Supply and fix 300mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy complete all as specified and as directed.

Supply and fix 100mm long aluminium anodised, barrel tower bolts of extruded section and fixed complete all as specified and as directed.

Supply and fix 150mm long aluminium anodised, barrel tower bolts of extruded section and fixed complete all as specified and as directed.

Supply and fix 100mm size extruded aluminum alloy handle fabricated type anodized (ISI Marked) complete all as specified and as directed.

Supply and fix 150mm size extruded aluminum alloy handle fabricated type anodized (ISI Marked) complete all as specified and as directed. Make for item Nos. 80 to 84:- Classic / Asian / Alans / KR / Ajanta / Argent / Alans / Bharat / Heitich / Prayag.

Taking down old unservicebale steel window frame with shutter of any description.

Supply and fix rolled mild steel Fe-410-w (grade E-250) quality A framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work complete all as specified and as directed. Make:- Rinl / Sail / Tisco/JAI Balaji industries ltd / Shyam Steel industries Ltd. / SPS stell rolling mills ltd / SRMB Srijan Pvt Ltd / Electrosteel steels ltd / Shyammetallics and energy ltd / Jindal.

Supply and fix 3mm thick frosted glass ordinary quality, glazing with oil putty in square not exceeding 0.5 Sqm in each pane fixed to steel frame complete all as specified and as directed. Make for item Nos. 87 & 88:- Saint Gobain, Modi Float, Triveni Float Glass, Crown, Prayag polymers / Pilkington Glass

Supply and fix stainless steel wire cloth of 0.36 mm nominal dia of wire and averaging of width of aperture 1.40mm,conforming to IS, fixed with stainless steel wire staples complete all as specified and as directed.

Supply and fix in repairs stainless steel wire cloth of 0.36 mm nominal dia of wire and averaging of width of aperture 1.40mm,conforming to IS, fixed with stainless steel wire staples complete all as specified and as directed.

Material and labour for cementitious grouts mixed with admixture around water spouts, CI pipes / PVC pipes of any dia complete all as specified and as directed. Make : Cebex 100 of Fosroc/Intraplast EP of SIKA/ or equivalent brand of PIDILITE)

Supply and fix in repair UPVC (SWR) pipe 110 mm bore,single socketed, in any length with rubber ring joints fixed to walls with and including PVC clip complete all as specified and directed.

Supply and fix PVC (SWR) bend 110 mm dia complete all as specified and directed.

Supply and fix PVC(SWR)branch piece, single T equal or unequal 110 mm dia complete all as specified and directed. Make for item Nos. 92 to 94:- Prayag /Polytuf / Supreme / Prince / Reliance / Jain pipes / Finolex. / Kisan / M/S Fusion Industries LTd

Dismantling cast iron drain pipes, including fittings, jointed in cement mortar obtained either from trenches/wall as required complete all as specified and as directed.(Note : Excavation if required, shall be measured and paid separately)

Supply and fix 100mm bore cast iron (Sand cast pipes) soil, waste and vent pipes in any length with or without ears, with cement joints, laid in trenches or in floors complete all as specified and as directed.

Supply and fix 100mm bore cast iron (Sand cast pipes) soil, waste and vent pipes in any length with or without ears, with cement joints, fixed to wall with MS clamp complete all as specified and as directed.

Supply and fix in repairs 75mm bore cast iron (Sand cast pipes) soil, waste and vent pipes in any length with or without ears, with cement joints, fixed to wall with MS clamp complete all as specified and as directed.

Supply and fix 100mm bore cast iron bends (any radius), diminishing pieces or tapers (larger bore measured) complete all as specified and as directed

Supply and fix 100mm bore cast iron branch pieces, single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches complete all as specified and as directed.

Supply and fix 100mm bore cast iron cowls complete all as specified and as directed. Make for item Nos. 97 to 102:- AMC / ICC / Hepco / PIC / BIC / SON/ Jayaswal Neco Industries LTD

Demolition of brickwork built in cement mortar including all quoins, arches, pillars etc. complete all as specified and as directed.

Material and labour for brick work with bricks class designation 75, old size, straight or curved on plan exc 6m mean radius built in cement mortar (1:6) complete all as specified and as directed.

Material and labour for brickwork with bricks class designation 75, old size, straight or curved on plan exc 6m mean radius in half brick thick wall built in CM 1:4 complete all as specified and directed.

Taking down pelmet boxes and supply & fix Decorative /Fency type curtain rods of not length not exceeding 1.5 m of Aluminium /brass alloy suitable of 20 mm dia alongwith fancy brackets and nec fixtures complete all as specified and directed. Make:- Unique Décor Marvel / Vista /Lavolor / Mac Decor.

Demolition of cement concrete of any description and in any position provided as in roof padding, roof curb etc including debris/retrieved materials disposed off out of MoD land as directed and complete all as specified and as directed. Note: - (a) Demolition to roof treatment should be done carefully . (b) Any damage occurred in the roof surfaces during demolition shall be made good by the contractor without extra cost to the department.

Mterial and Labour for providing plain cement concrete 1:2:4,type B1 using 20mm graded aggregate as in roof padding over RCC slab,laid in slope as per requirement, mixed with integral water proofing liquid admixture as per manufacture's instructions complete all as specified and as directed. Note :- (i) Average thichness of PCC shall be 50 mm (ii) Intrgral water proofing liquid admixture shall be measured and paid seperately under appropriate item here in after.

Material and Labour for water proofing treatment with APP based standared membrane over PCC padding of roof with the following courses of treatment :- (a) Apply bituminous primer (IS-3384)@0.40kg/Ltr per sqm of the surface area,as per including cleaning the surfaces and all as specified. (Make of primer: STP / -Pibial primer of TEXA or equivalent product of BITUMAT/BITUNIL/SIKA) (b) Apply APP plastomeric bitumen based water proofing membrane polyester reinforced (4 KG /Sqm)with 10 cm over laps and torch bonded at joints including surfacepreparation before and after application of treatment as per manufactures instruction complete all as specified and as directed.(Make of APP Membrane:- STP / Moply FP 4 kg mineral of TEXA/WP Shield 103 PM of SIKA or Eqiuivalent material of BITUNIL/ BITUMAT.)

Taking down carefully copper / aluminium point wiring (light, fan, socket or power) complete including fittings and fixtures such as switches, Bell push, call bell, ceiling rose, sockets, switch sockets, regulator, lamp holder etc by unscrewing from board carefully and keep aside to store in safe custody or for taking credit including making good of the disturbed surfaces, all as specified and directed.

Material and labour for point wiring (surface type) with PVC insulated FRLS(Fire Retardant Low Smoke) cable 1100 volts grade unsheathed single core multi-stranded copper conductors 1.5 sqmm (nominal area) for phase, neutral and 1.5 sqmm PVC insulated unsheathed multi-stranded copper conductor cable for earth continuty conductor drawn through and including PVC casing-N- caping (medium duty)double lock type,size of casing caping as required at site but not less than 20mm with fittings and accessories pressed steel sunken terminal box made out of 1.6 mm thick MS sheet duly painted with two coats of synthetic enamel paint of approved colour over a coat of red oxide zinc chrome primer and covered with 3 mm thick bakelite sheet cover for fixing switches, sockets, regulator etc and earth continuty conductor shall be connected to common earth and earth dolly for one light/fan point controlled by one way switch complete all as specified and as directed.

All as per item No 111 here in above but for One 3/5pin 6 Amp Socket outlet on the same board with other switches complete all as specified and as directed.

All as per item No 111 here in above but for One 3/5pin 6 Amp Socket outlet on the independent board complete all as specified and as directed.

All as per item No. 111 here in above but for one light point controlled by two 2 way switch complete all as specified and as directed.

Material and labour for point wiring (surface type) with PVC insulated FRLS(Fire Retardant Low Smoke) cable 1100 volts grade unsheathed single core multi-stranded copper conductors 2.5 sqmm (nominal area) for phase, neutral and 2.5 sqmm PVC insulated unsheathed multi-stranded copper conductor cable for earth continuty conductor drawn through and including PVC casing caping (medium duty) double lock type, size of casing caping as required at site but not less than 20mm with fittings and accessories pressed steel sunken terminal box made out of 1.6 mm thick MS sheet duly painted with two coats of synthetic enamel paint of approved colour over a coat of red oxide zinc chrome primer and covered with 3 mm thick bakelite sheet cover for fixing switches, sockets, regulator etc and earth continuty conductor shall be connected to common earth and earth dolly for 3/5 pin 16 amps socket point on independent board complete all as specified and as directed. MAKE FOR ITE M nOS. 111 TO 115:- Make of cable:-Polycab / Finolex / Havells / / KEI / HPL / Mescab / Standard / RR Kabel. Make of casing-N- caping:- Plaza / Presto Plast / Precision / M/S AGK Industries.

Supply and fix switch piano flush button 6 Amp single pole, one way complete all as specified and as directed .

Supply and fix Switch socket combination 5 Pin, 6 Amp flush type complete all as specified and as directed..

Supply and fix socket out let 5 Pin, 6 Amps flush type complete all as specified and as directed.

Supply and fix switch socket combination 5A/16 Amp 5 pin flush type with complete all as specified and as directed.

Supply and fixing switch flush type, 6 Amps, single pole, two way complete all as specified as directed

Supply and fix lamp holder insulated body with back plate for angle/batten fittings complete all as specified and as directed.

Supply and fix ceiling rose surface bakelite, 65 x 50mm, three terminals all as directed.

Supply and fix electronic fan regulator stepped type flush type AC 240 volt complete all as specified and as directed.. Make for item Nos. 116 to 123:- Anchor / Cona / Bajaj / Crabtree / Havells / HPL/ C&S / Standard

Taking down of ceiling fans of 1200/ 1400mm sweep & refixing safely alongwith its connected accessories like fan hook, clamps, fateners etc. safely all as specified and as directed.

Matetial and labour for providing sub-main wiring with 6.0 sqmm nominal area two single core PVC insulated FRLS unshethed multi-stranded copper conductor cable including one 6.0 sqmm PVC insulated unshethed multi-stranded copper conductor cable for earth wire drawn through and including PVC casing caping (medium duty)double lock type, size of casing caping as required at site but not less than 20mm with fittings and accessories, including taking down old unserviceable wiring and making good the disturbed surface of wall floor etc, complete all as specified and as directed. Note :(i) Three run of 6.0 Sqmm + one run pvc casing caping shall be measured as an one Unit. Make of cable:-Polycab / Finolex / Havells / / KEI / HPL / Mescab / Standard / RR Kabel. Make of casing-N- caping:- Plaza / Presto Plast / Precision / M/S AGK Industries.

Supply and fix LED tube light fitting including LED tube rod of extruded alluminum and PC diffuser and inbuilt driver of 18/20 Watt and two Nos 2nd class hard wood round block and connecting up with twin core twisted flexible copper conductor cable of suitable size from ceiling rose to connector of tube light fittings including taking down old u/s fluorscent tubelight fitting. complete all as specified and as directed. Make : Havells Cat no. of tube rod LHLDDCXCML8Q020 and Fitting (Batten) cat no. LHFXCENNTN1W020/Bajaj Cat no. of tube rod-BLRB20CWLED and Fitting (Batten) cat no - BLRBDB118)/Century LED Cat No of tube rod TWPP020C2066 and fitting (Batten) cat no KCCF02000863

Diito all as per above item No. 126 but replacing of the FTL fitting of 20 watt with energy saving LED luminarries fitting of 10 Watt including taking down old fitting complete all as specified and as directed.Make : Bajaj / Havells / Century LED / Jaguar

Supply and fix in repair LED lamp (B22 Base type) of 1x7 W after taking down the old unserviceable CFL/GLS lamp complete all as specified and as directed. Make:Century LED/bajaj / Havells / Jaguar

Supply and fix, in repair, LED Flood light luminaries with complete with panel and including LED Lamp of 60/70 Watt complete all as specified and as directed. Make:- Century LED Cat No. FWQU060C2007/Jaguar Cat no LFLDSLM070XC/Bajaj Cat No BJFL60WLED

Supply and fix 4 way vertical type TPN DB in double door suitable for four pole MCCB as incomer but without MCB including making good of damaged surface/wall including re-connection with existing earth wire to DB including taking out old unserviceable DB all as specified and as directed.Make: Havells Cat No. DHDLVDRWGOFO04/ LTVD04N of L&T/ INDOASIAN Cat No. 811888.

Supply and fix in replacement MCCB 100 Amps, four pole, 415 volts,16/18 KA complete all as specified and as directed. Make -IStandard / L&T/ Indo Asian / C&S / Havells / HPL / Legrand.

Supply and fix sheet metal enclosure single pole & neutral for DBs (Doublele door) 12 way with 200 amps rated busbar including taking down old unserviceable enclosure one complete all as specified as directed. Make: Standard / L&T/ Indo Asian / C&S / Havells / HPL / Legrand.

Supply and fix sheet metal enclosure single pole & neutral for DBs (Doublele door) 4 way with 200 amps rated busbar including taking down old unserviceable enclosure one complete all as specified as directed. Make: Standard / L&T/ Indo Asian / C&S / Havells / HPL / Legrand.

Supply and fix in repair MCB Double pole 63 amps, 240 volts, 10 KA, 'C' series with all incoming / outgoing connections with proper size of aluminium lugs complete all as specified as directed

Supply and fix in repair MCB Double pole 32 amps, 240 volts, 10 KA, 'C' series with all incoming / outgoing connections with proper size of aluminium lugs complete all as specified as directed

Supply and Fix MCB single pole 6 to 32 amps, 240 volts, with all incoming / outgoing connections with proper size of aluminium lugs to including taking down old unserviceable MCB complete all as specified and as directed Note:(i) Cost of alluminium lugs shall be included in the unit rate. Make for item Nos. 134 to 136:- Standard / L&T/ Indo Asian / C&S / Havells / HPL / Legrand.

Material and labour for earthing with galvanized steel earth plate electrode 600 x 600 x 6 mm thick, buried directly in ground ( earth pit not less than 2.25 mtrs deep below GL) with top edge of the plate not less than 1.5 mtrs below normal ground level, connected to galvanised earth lead wire 4.0mm dia by means of bolts, nuts, check nuts and washers of galvanized iron or steel, earth lead wire protected by and including 15mm dia GI pipe (Light grade) and 20mm dia GI pipe (medium grade) for watering and connected to control switch as directed including necessary earthwork as in soft/loose soil, concrete pit in PCC (1:3:6) type C1, pre cast RCC (1:1.5:3) type A1 cover slab duly reinforced with 8mm dia TMT bar @ 150mm C/C both way and two Nos lifting handle made of 8mm dia TMT bar and set in cement mortar (1:4), funnel, wire mesh, char coal or coke and salt in alternate layer, testing, etc complete and as specified in electrical plate No 5 of SSR Pt I including taking down old earthing complete all as specified as directed

Supply and fix GI wire as earth continuity conductor including taking down old unserviceable earth wire compleate all as specified and as directed.

Supply and fix GI pipe 15 mm bore (dia), light-grade for protection of earth electrode including taking down old unserviceable GI pipe complete all as directed and as specified. Make:- Prakash / Utkarsh Tubes Ltd / Jindal / Zenith / Bansal /Nezone/ M/S BST Infratech Ltd.

MAZUMDER & CO

S S ENTERPRISE

RADHA ENTERPRISE

CHOWDHURY SMALL INDUSTRIES

SHRI MILAN CHANDRA DAS