Civil works for duplication of ECU Test Rig and extension of substation building inside HAL Factory Lucknow

Name of the Individual / Firm / Company: * Mandatory

Type of ownership Pvt. Ltd. / Proprietorship/Partnership/ Public limited/ Govt. Agencies/ Trust

Details of Constitution or Legal Status such as certificate of incorporation, shops and establishments, Contractor registration No etc.,

Address for correspondence:

Contact details

Intending parties having credentials as mentioned below may participate in e-tendering. The pre-qualification requirements for the works are as under :-

Constitution, legal status and Power of attorney in case of Pvt. Limited/ limited companies

Registration with HAL / other organization if any

Copy of PAN No./GIR No. registration certificate issued by Income Tax Authority

GSTIN number along with the registration copy of the same.

SAC (Service Accounting code) for the subject work is SAC 995419

Bank account details such as account no., name of account holder, name and address of the bank, IFSC code duly certified by the bank along with cancelled cheque as a document of proof shall be attached.

List of similar works executed in the past 7 years with value, schedule period of completion reasons for delay in completion if any and salient features of works, with documentary evidence of satisfactory completion.

Essential Criteria

Average annual financial turn over during the last 3 years, ending 31st March 2025 of the previous financial year [ should not be less than 30% of Amount put to tender]

EMD of Rs.131880.00

The Solvency required will be 40% of the approx. estimated amount put to tender ie Rs. 26.38 lakhs. The solvency certificate shall from a nationalized or scheduled bank and issued within a period 12 months from the final date of submission of tender. The solvency certificate shall be issued in general stating “ To whomsoever” or specific to HAL-AD Lucknow.

Experience of having successfully completed similar works during last 7 years ending last day of previous month. [Latest work experience certificate may be uploaded]

(i) THREE similar completed works each costing not less than the amount equal to 40% of the estimated cost.

(ii) TWO similar completed works each costing not less than the amount equal to 50% of the estimated cost.

(iii) ONE similar completed work each costing not less than the amount equal to 80% of Amount put to the tender.

Details of person holding the power of Attorney (If different from contact person)

DECLARATION I

DECLARATION II

DECLARATION III

Description of item

Surface dressing of uneven surface not exc. 15 cm deep, cutting & filling, including cutting of wild growth, jungle, cutting and uprooting of plants/ wild vegetation etc. also removal of surplus earth, wild growths, plants etc as directed by EIC upto lead of 50 Mtr and lift upto 1.5m or part there of, including cost of all labours, materials, equipments, machineries, T&P etc, as required for proper completion of the work, all complete at any height/depth, as per specification of CPWD, drawing, and as directed by Engineer-in-charge.

Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m all kinds of soil, complete for foundations, column footing, wall foundation, manholes, post holes, trenches etc. including spreading, levelling, watering and well ramming in layers not exc. 25 cm. dewatering if required, dressing the sides, dispoal of excess surplus soil, including cost of all labours, materials, compaction equipments, machineries, transportation, T&P etc.as required for proper completion of the work, all complete at any height/depth, as per specification of CPWD, drawing, and as directed by Engineer-in-charge.

Earth work in excavation by mechanical means (Hydraulic excavator) / manual means for all kinds of soil over areas (exceeding 30cm in depth,1.5 m in width or 10 sqm on plan) including extra for every additional lift of 1.5 m or part thereof in excavation / banking excavated or stacked materials. including dressing of sides and ramming of bottoms, for all lift for all kind of soils,, including getting out the excavated soil and disposal of surplus excavated earth, lead upto 50 m. & Lift upto 3m, including spreading, levelling, watering and well ramming in layers not exc. 25 cm. dewatering if required, dressing the sides, dispoal of excess surplus soil, including cost of all labours, materials, compaction equipments, machineries, transportation, T&P etc.as required for proper completion of the work, all complete at any height/depth, as per specification of CPWD, drawing, and as directed by Engineer-in-charge.

Local Sand filling in plinth including supply of neccasary quantity of sand from the site of work 8km and including watering dessing etc. including cost of all materials labour and T&P etc . Required for proper completion of the work.

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 and for all lift, including cost of all labours, materials, compaction equipments, machineries, and T&P etc.as required for proper completion of the work, all complete at any height/depth, as per specification of CPWD, drawing, and as directed by Engineer-in-charge.

Providing & laying PCC: 1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources) in foundation, column, footing, trench, appron,floor,under ground tank, post hole, platform under floors or any other similar description of works eg. drains, pipe lines bedding layers, road, chambers excluding the cost of centring and shuttering, including form work, compaction, curing, materials, labour, mechanical mixing, transportation, T&P etc, as required for proper completion of the work, all complete at any height/depth, as per specification of CPWD, drawing, and as directed by Engineer-in-charge.

Providing, fabricating, fixing and removing, form work / shuttering of side of concrete, foundation, footings, base of coloum, slab, lintel, beams side etc. for all type of RCC work in required shape and size, with true line & plumb etc. with plywood / MS plates shuttering including oiling of the top surfaces of shuttering, all supports with MS or wooden including all braces, struts, balli, working scaffoldings, ladders, wastage labour, material, T&P, transportation, etc, as required for proper completion of the work, all complete at any height/depth, as per specification of CPWD, drawing, and as directed by Engineer-in-charge.

in sub-structure upto plinth beam e.g. column, footing, wall, plinth beam, chilled water trench, water tank etc.

Centering and shuttering including strutting, propping etc. and removal of form for, Suspended floors, roofs, landings, balconies and access platform

Centering and shuttering including strutting, propping etc. and removal of form for, Columns, Pillars, Piers, Abutments, Posts and Struts

Centering and shuttering including strutting, propping etc. and removal of form for, Lintels, beams, plinth beams, girders, bressumers and cantilevers

Providing & fixing hot finished welded type tubes Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. all complete including cost of all labour, material, T&P, erection, wastages, transportation, loading, unloading, cartages, etc., as required for proper completion of the work, all complete at any height/depth, as per specification of CPWD, drawing and as directed by Engineer-in-charge.

Dismantling steel work in built up sections in angles, tees, flats and channels including all gusset plates, bolts, nuts, cutting rivets, welding etc. including dismembering and stacking within 50 metres lead including disposal of unserviceable material, cost of all labours, scaffolding, T & P etc. all complete at all height as per specification of CPWD or as directed by Engineer-in-charge.

Providing & fixing at all heights, levels and locations colour finish Aluminium alloy roofing sheets of 0.56 mm, Aluminium Color coated troughed profile with center to center pitch of 200 mm, depth of 32 mm, overall profile width1092 mm, cover width 1000mm. Having alloy IS designation 31500, temper Hx8 conforming to IS 737 and dimensions as per IS code 2676 with characteristics of good formability and corrosion resistance. The profile sheets shall be fixed to truss members in slope or required pitch or curvature with Hex cap headed self drilling/tapping Stainless steel screws M6, 50 mm long with 3 mm EPDM seal washer etc. all inclusive of labour, scaffolding, T&P and sundries etc. complete including cost of all labour, material, T&P, erection, wastages, transportation, loading, unloading, cartages, etc., as required for proper completion of the work, all complete at any height/depth, as per specification, drawing and as directed by Engineer-in-charge. (Cost of truss/frame work shall be paid separately).

Providing and fixing of Pre-coated colour or mill finish Aluminium Roofing Accessories in 0.71 mm thickness ,Alloy 31500 (IS designation) [Aluminium Alloy (AA) 3004 (ISO designation)] For color, coating shall be 5-7 microns epoxy primer on both sides of the sheet and polyester top coat 15-18 microns, using self drilling/tapping SS screws of size 6 x 50mm with 3mm thick EPDM seal and SS plain washer complete: Precoated/mill finish aluminium Flashings/ Aprons (Upto 600 mm) complete including cost of all labour, material, T&P, erection, wastages, transportation, loading, unloading, cartages, etc., as required for proper completion of the work, all complete at any height/depth, as per specification, drawing and as directed by Engineer-in-charge.

Providing and laying class 'A' old size brick (having crushing strength 75 Kg/cm²) work in cement mortar in CM 1:6 ( 1 cement : 6 coarse sand) , walls, drains, manholes, chambers, ducts etc or any description of similar works, including necessary cutting of bricks as required , wastages,straight or curved, work up to any height or depth including cost of scaffolding , raking out joints up to 1 cm depth as the work proceeds, including all material, labour, T&P, curing, scaffolding, wastage etc. required for proper completion of work and as per direction of EIC.- in foundation and plinth in:

Providing and laying class 'A' old size brick (having crushing strength 75 Kg/cm²) work in cement mortar in CM 1:6 ( 1 cement : 6 coarse sand) , walls, drains, manholes, chambers, ducts etc or any description of similar works, including necessary cutting of bricks as required , wastages,straight or curved, work up to any height or depth including cost of scaffolding , raking out joints up to 1 cm depth as the work proceeds, including all material, labour, T&P, curing, scaffolding, wastage etc. required for proper completion of work and as per direction of EIC.- in superstructure above plinth level up to floor V level in all shapes and sizes.

Providing and laying in position ready mixed or site batched design mix cement concrete for reinforced cement concrete work - Concrete of M25 grade with minimum cement content of 330 kg /cum using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland /Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to accelerate / retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads; but excluding the cost of centering, shuttering, finishing and reinforcement as per direction of the engineer-in-charge; for the following grades of concrete. Note: Extra cement up to 10% of the minimum specified cement content in design mix shall be payable separately. In case the cement content in design mix is more than 110% of the specified minimum cement content, the contractor shall have discretion to either re-design the mix or bear the cost of extra cement. - All works upto plinth level for Footings, Plinth Beam, Grade beam or any similar structure etc.

Providing & laying reinforced cement concrete 1:1.5:3 (1cement: 1.5 coarse sand : 3 graded stone aggregat 20 mm nominal size of Bharatcoop/Dala/Jhansi) in super structure i.e. above plinth beam eg. column, slab, beam, lintel, chajja, fascia, circular column / structure, etc or any other similar description of works, including form work, side shuttering, compaction, curing, materials, labour, mechanical mixing, including making of expansion/contraction joints, construction joints wherever required as per IS Code & required at site, making of grooves, wastages, transportation, T&P etc, as required for proper completion of the work, all complete at any height/depth, as per specification, drawing and as directed by Engineer-in-charge.

Providing and laying deformed or twisted steel reinforcement ISI mark TMT Bars of make RINL/SAIL/TISCON/, as approved by EIC of any dia as per IS 1786 ( latest version) for all type of R.C.C works, straighting, cut to length, bend to shape required, including cranking, welding, bending spirally or hooping providing spacers / chairs and binding with mild steel wires (annealed) not less than 0.90 mm diameter or securing with clips so that placing and ramming of concrete will not displace it, including cost of all labour, material, loading & unloading, welding,T&P, wastage, transportation etc., as required for proper completion of the work, all complete at any height/depth, as per specification of CPWD, drawing and as directed by Engineer-in-charge.

Providing, rendering, dubbing out cement plastering 15 mm thick with cement mortar 1:6 (1 cement: 6 coarse sand) on walls/ceiling, of rough / fair faces of brick wall / concerete surface of any description including jambs, soffit and edges of plastering chamfering wherever required, finishing of surface even and smooth without using extra cement, including cost of all labour, material, scaffolding, curing, hacking of concrete surfaces, wastages, making joints/grooves (if required), T&P etc, as required for proper completion of the work, all complete at any height/depth, as per specification, drawing and as directed by Engineer-in-charge.

Providing, rendering, dubbing out cement plastering 12 mm thick with cement mortar 1: 6 (1 cement: 6 coarse sand) on wall & ceiling of rough / fair faces of brick / concerete surface including jams, soffit and edges of plastering chamfering wherever required, finishing of surface even and smooth without using extra cement with all labour, material, scaffolding, curing, including making contraction joints / grooves, hacking of concrete surfaces, T&P etc as required for proper completion of the work, all complete at any height/depth, as per specification of CPWD, drawing and as directed by Engineer-in-charge.

Providing and applying white cement based putty of make J&K/ Birla/ Asian / Berger or as approved by EIC, of average thickness 01 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete, including cost of all labours, materials, scaffolding, transportation, T&P etc., as required for proper completion of the work, all complete at any height/depth, as per specification of CPWD, drawing and as directed by Engineer-in-charge. (Note- Sample shall be approved by EIC before precurement of material)

Providing & applying two coats of finishing walls with Acrylic Smooth exterior paint of required shade; (Two or more coats applied @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm.of first quality of approved shade and make like apex ultima of Asian /weather coat long life of Berger / weather shield max of ICI etc including preparation of surfaces, by brooming down, removal of flakes, oil, grease marks by sand papering where required, filling holes /Cracks with birla putty / snowfilla, spreading and removing covering to doors, windows, fittings, floor, etc. to protect from splashes, removing & replacing moveable furnitures, leaving the premises clean and tidy, disposing rubbish outside in dustbins removal of all splashes and cleaning glass and joinery, use of scaffolding transportation, T&P etc., as required for proper completion of the work, all complete at any height/depth, as per specification, drawing and as directed by Engineer-in-charge. (Note- Sample shall be approved by EIC before procurement of material)

Providing & applying two coats or more of 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gram/litre, of approved make & shade such as Asian/Berger/ICI or as approved by EIC, to walls of any description at any height / depth of required shade and colour all complete to achieve even shade and colourn new/old work (two or more coats) over and including water thinnable priming coat with cement primer having VOC content less than 50 gram/litre including preparation of surface by sand papering, filling holes, cracks with birla putty stopping ,removing oil/smudge marks spreading and removing coverings to doors, windows, floors, fittings to protect from splashes, removing and replacing furniture's, moveable cupboards, chicks, blinds, washing floors, cleaning glass, joinery, leaving the premises clean neat and tidy including disposing rubbish outside in dustbins, cost of all labours, materials, loading, unloading, scaffolding, wastages, T&P etc, as required for proper completion of the work, all complete at any height/depth, as per specification of CPWD, drawing and as directed by Engineer-in-charge. (Note- Sample shall be approved by EIC before procurement of material)

Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete, including the cost of providing and fixing necessary 27.5 cm long wire springs manufactured from high tensile steel wire of adequate strength conforming to 1S: 4454 - part 1 and M.S. top cover of required thickness for rolling shutters. 80x1.25 mm M.S. laths with 1.25 mm thick top cover including cost of all labours, materials, transportation, loading, unloading, wastages, cartages, T&P etc., as required for proper completion of the work, all complete at any height/depth, as per specification of CPWD, drawing and as directed by Engineer-in-charge. (Note- Sample/size/height shall be approved by EIC before precurement of material)

Providing and fixing ball bearing for rolling shutters including all cutting, welding, making good etc. as per site requirement, fixing with all other material, T & P, labour, cutting, wastage, cartage all complete as per specification and direction of EIC.

Taking out doors, windows and clerestory window shutters (steel or wood) Of area 3 sq. metres and below including stacking within 50 metres lead and depositing to Civil Factory store including the cost of all approved materials, labour, wastages, testing, T&P at all heights etc. all complete as per specification and as directed by Engineer In Charge.

Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead including disposal of unserviceable material, cost of all labours, scaffolding, T & P etc. all complete at all height as per specification of CPWD or as directed by Engineer-in-charge.

Dismantling old plaster/tile or skirting of any description at any height raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead including cost of all labours, materials, scaffolding and T&P etc. all complete at all height as per specification, drawing and as directed by Engineer in charge.

Dismantling aluminium/ Gypsum partitions, doors, windows, fixed glazing and false ceiling of any description including disposal of unserviceable material and stacking of serviceable material with in 50 meters lead as directed by Engineer-in-charge including cost of all labours, scaffolding, T & P etc. all complete at all height as per specification of CPWD and as directed by Engineer in charge.

Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete cleaning the surface including disposal of rubbish to the designated place including cost of all labours, materials, scaffolding and T&P etc. all complete at all height as per specification, drawing and as directed by Engineer in charge.

Providing and laying integral cement based water proofing treatment with average thickness of 120 mm and minimum thickness at khurra as 65 mm including preparation of surface as required for treatment of roofs, balconies, terraces etc consisting of following operations (a) Applying a slurry coat of neat cement using 2.75 kg/sqm of cement admixed with water proofing compound conforming to IS. 2645 and approved by Engineer-in-charge over the RCC slab including adjoining walls upto 300 mm height including cleaning the surface before treatment, including cost of all labours, materials, scaffolding, curing, wastages and T&P etc. required for proper completion of work, all complete at any height/floor, as per specification, drawing and as directed by Engineer in charge. (b) Laying brick bats with mortar using broken bricks/brick bats 25 mm to 115 mm size with 50% of cement mortar 1:5 (1 cement : 5 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge over 20 mm thick layer of cement mortar of mix 1:5 (1 cement :5 coarse sand ) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge to required slope and treating similarly the adjoining walls upto 300 mm height including rounding of junctions of walls and slabs, including cost of all labours, materials, scaffolding, curing, wastages and T&P etc. required for proper completion of work, all complete at any height/floor, as per specification, drawing and as directed by Engineer in charge.

Providing and making gola 75x75 mm in deep cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 stone aggregate 10 mm and down gauge), including finishing with cement mortar 1:3 (1 cement : 3 fine sand) as per standard design etc., including cost of all labour, material, wastage, transportation, wastages, T&P etc. as required for proper completion of the work, all complete at any height/depth, as per specification of CPWD, drawing and as directed by Engineer in charge.

Providing and making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate of 20 mm nominal size) over P.V.C. sheet 1 m x1 m x 400 micron, finished with 12 mm cement plaster 1:3 (1 cement : 3 coarse sand) and a coat of neat cement, rounding of the edges, making and finishing the outlet, fixing of grating including cost of all labour, material, wastage, transportation, T&P, etc. as required for proper completion of the work, all complete at any height/depth, as per specification of CPWD, drawing and as directed by Engineer in charge.

Providing and applying two coats of synthetic enamel paint on wall / wood/ steel surface of any description any girth at any height with first quality synthetic enamel paint of Asian / Shalimar / Berger/ ICI/ Dulux etc of approved tint and including preparing of surface by sand papering, removing oil/ smudge marks, filling, touching, including cost of all labours, materials, scaffolding and T&P etc. all complete at all height as per specification, drawing and as directed by Engineer in charge.

Providing and laying 62 mm thick cement concrete flooring with concrete hardener topping, under layer 50 mm thick cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) and top layer 12mm thick cement hardener consisting of mix 1:2 (1 cement hardener mix : 2 graded stone aggregate, 6mm nominal size) by volume, hardening compound mixed @ 2 litre per 50 kg of cement or as per manufacture’s specifications, this includes cost of cement slurry, but excluding the cost of nosing of steps, including cost of all labour, material, T&P, wastage, transporatation, curing etc., as required for proper completion of the work, all complete at any height/depth, as per specification of CPWD, drawing and as directed by Engineer-in-charge.

Providing and fixing Powder Coated Aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required, thickness of aluminium section shall be 1.5 - 2.00 mm including cleat angle, Aluminium snap beading for glazing / paneling C.P. brass / SS stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (All fittings like -Glazing, paneling and dash fasteners to be paid for separately) including disposal of unserviceable material and stacking of serviceable material with in 50 meters lead, cost of all labour, material, T&P, wastage, transporatation, loading, unloading, etc. as required for proper completion of the work, all complete at any height/depth, as per specification, drawing and as directed by Engineer-in-charge.

Providing and fixing powder coated Aluminium (minimum thickness of powder coating min. 60 micron ) work for shutters of doors, windows & ventilators including hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions i.e. at top, bottom and sides, Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required thickness of aluminium section shall be 1.5 - 2.00mm including cleat angle, Aluminium snap beading for glazing / paneling C.P. brass / SS stainless steel screws, including disposal of unserviceable material and stacking of serviceable material with in 50 meters lead, cost of all labour, material, T&P, wastage, transporatation, loading, unloading etc. as required for proper completion of the work, all complete at any height/depth, as per specification of CPWD, drawing and as directed by Engineer-in-charge. (Note: Glazing, paneling and dash fasteners to be paid for separately)

Providing and fixing glazing in Aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawing and the directions of engineer-in-charge (Cost of Aluminium snap beading shall be paid in basic item) with float glass panes of 5.0 mm avg thickness of make Saint Gobain/Modigaurd or as approved by EIC.(weight not less than 12.50 kg / sqm) including cutting straight or curved as per site requirement, rounding off edges jointing with steel screws as per architectural drawings and including disposal of unserviceable material and stacking of serviceable material with in 50 meters lead, cost of all labour, material, T&P, wastage, transporatation, loading, unloading, etc. as required for proper completion of the work, all complete at any height/depth, as per specification of CPWD, drawing, and as directed by Engineer-in-charge.

Supplyingand fixingof 04mm thick ACPsheet inAl partition, Al doors, windowetcofmake Alstone/ Alkor/ Aludecor/ Alstrong as approved by EIC, finest quality two layers of aluminium skins.Precaoatedand thermally bonded withnon- toxicpolyethylenecore, fire resistant, Interior grade,dust and corrosion resistant, skin thickness 0.50mm with tolerence in width & length as+/-02mm and in thickness as+/- .2mm or as per manufacturer including all cuttingas per site requirement, fixing with all other material, T&P, labour, cutting, wastage, cartage all complete as per specification and direction of EIC.

Providing and fixing powder coated aluminium grill ( powder coated (thickness min 60 micron) of approved design/pattern with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles, fixing approved anodised aluminium standard section around the opening, including cost of all labour, material, welding, T&P, wastage, transporatation, loading, unloading, cartages, etc. as required for proper completion of the work, all complete at any height/depth, as per specification of CPWD, drawing, and as directed by Engineer-in-charge. (Note- only weight of grill to be measured for Payment)

Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters 30 mm thick of make Century/Swastik/Action TESA/Kitply, or as approved by EIC, including stainless steel butt hinges (125mm) with necessary screws, cost of materials, labour, wastages, transportation, T&P etc, as required for proper completion of the work, all complete at any height/depth, as per specification, drawing and as directed by Engineer-in-charge.

Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete : 200 mm x 10mm, including , materials, labour, T&P etc, required for proper completion of the work etc all complete all as per specifications, drawings and as directed by Engineer-in-Charge

Providing and fixing Aluminium sliding door bolts 300 x 16 mm, ISI marked powder coated (powder coating (thickness min 60 micron) or as per IS code) transparent or dyed to required colour or shade, with nuts and screws, including cost of labour, materials, T&P etc, as required for proper completion of the work, all complete at any height/depth, as per specification of CPWD, drawing and as directed by Engineer-in-charge.

Providing and fixing aluminium powder coated handles 125 mm, ISI marked powder coated (powder coating (thickness min 60 micron) not less than grade AC 10 as per IS code) transparent or dyed to required colour or shade, with necessary screws, including, cost of labour, materials, T&P etc, as required for proper completion of the work, all complete at any height/depth, as per specification of CPWD, drawing and as directed by Engineer-in-charge.

Providing and fixing twin rubber stopper aluminium hanging floor door stopper, ISI marked, powder coated (powder coating (thickness min 60 micron) not less than grade AC 10 as per IS code) transparent or dyed to required colour and shade, with necessary screws, including cost of labour, materials, T&Petc, as required for proper completion of the work, all complete at any height/depth, as per specification of CPWD, drawing and as directed by Engineer-in-charge.

Providing and fixing IS : 12817 marked 125x64x1.90 mm stainless steel butt hinges with stainless steel screws etc. complete including cost of labour, materials, T&Petc, as required for proper completion of the work, all complete at any height/depth, as per specification of CPWD, drawing and as directed by Engineer-in-charge.

Providing and fixing Aluminium extruded section body tubular type universal hydraulic door closer of approved brand and manufacture like Godrej/ Amar /Everest as approved by EIC (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 36 kg to 80 kg and door width from 701 mm to 1000 mm) with double speed adjustment with necessary accessories and screws, including cost of materials, labour, T&P etc, as required for proper completion of the work, all complete at any height/depth, as per specification, drawing and as directed by Engineer-in-charge.

Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings like MS handle, MS hinges (heavy duty), locking arrangement, bushes for fixing of door, complete, including applying a priming coat of approved steel primer, using M.S. angels 40x40x6 mm for diagonal braces, cost of all labour, material, welding, cutting, cartages, loading, unloading, T&P, wastage, transportation etc., as required for proper completion of the work, all complete at any height/depth, as per specification of CPWD, drawing and as directed by Engineer-in-charge.

Providing, Fabricating & fixing of Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, welding, cut to shape, bending, fixing in position and applying a priming coat of approved steel primer all complete, MS Roof Truss (framed), purlins, crain, gantries, rails & fasteners and heavy bracket framing beam, Tee, angle, channel, tubular, rectangular, square, flat, (all required sections including distance pieces, cleats, base plates, nut bolts, tie road, foundation bolt etc), including cost of all labour, material, T&P, erection, wastages, transportation, loading, unloading, cartages, etc., as required for proper completion of the work, all complete at any height/depth, as per specification, drawing and as directed by Engineer-in-charge.

Providing and fixing Vertical venetian blinds of 75/ 100mm width of approved colour & texture/pattern (approved designs printed / plain) including its hardware mechanism of repuated manufacturer such as Vista, Aerolux, MAC or as approved by EIC, all complete with material, fixing, fixing accessories, making holes in concrete / brick wall, making good, wastage, including cost of all materials, labours, T & P, cutting wastages, making provisions for hardware fittings, pattern, design, colour etc. as required for proper completion of the work, all complete at any height/depth, as per specification, drawing and as directed by Engineer-in-charge. (sample is to be approved before procurement)

Supplying and fixing not less than 50 micron thick designer film on glass door/ window/ galzed partition of Garware or equivalent make and shade as approved , reflective type, including cleaning of glass with liquid soap before fixing of film including removal of damaged/ unserviceable sun film from glass, cleaning of glass, wherever required etc. complete including cost of all labour, materials, wastage, T&P, etc. all complete work at all heights etc as per specification, drawing and as directed by Engineer in charge

Providing and fixing on wall face unplasticised rigid PVC rain water pipes single socketed pipes(110mm dia) of make Supreme/Astral/Finolex or as approved by EIC, conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, including cost of all labours, materials, transportation, loading, unloading, wastages, cartages, T&P etc., as required for proper completion of the work, all complete at any height/depth, as per specification of CPWD, drawing and as directed by Engineer-in-charge.

Providing and fixing on wall face unplasticised PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes- 110mm bend conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, cost of all labours, materials, transportation, loading, unloading, wastages, cartages, T&P etc., as required for proper completion of the work, all complete at any height/depth, as per specification of CPWD, drawing and as directed by Engineer-in-charge.

Dismantling roofing including ridges, hips, valleys and gutters etc., and stacking the material within 50 metres lead of GS Sheet, including disposal of unserviceable material, cost of all labours, scaffolding, T & P etc. all complete at all height as per specification of CPWD or as directed by Engineer-in-charge.

Providing and laying factory made chamfered edge Cement Concrete paver blocks, 80 mm thick C.C. paver block of M-35 grade with approved colour design and pattern in footpath, approach, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50mm thick compacted bed of sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand, including cost of all labours, materials, transportation, loading, unloading, wastages, cartages, T&P etc., as required for proper completion of the work, all complete at any height/depth, as per specification, drawing and as directed by Engineer-in-charge. (Note- Sample shall be approved by EIC before precurement of material)

Providing and laying Chequerred precast cement concrete tiles 22 mm thick Dark shade pigment using ordinary cement in footpath, courtyard, Approach & or as required on site, jointed with neat cement slurry mixed with pigment to match the shade of tiles, including rubbing and cleaning etc. complete, on 20 mm thick bed of cement mortar 1:4 (1 cement: 4 coarse sand). Light shade pigment using white cement and matching pigments of matching shade , including cost of all labours, materials, scaffolding and T&P etc, as required for proper completion of the work, all complete at any height/depth, as per specification, drawing and as directed by Engineer-in-charge. . (Note- Prior Sample shall be approved by the EIC).

Providing and laying brick work Honey-comb brick work 10 / 11.4 cm thick with common burnt clay bricks of class designation 7.5 in super structure above plinth level upto floor V level with cement mortar 1:4 (1 cement : 4 coarse sand). etc. including cost of all labours, materials, scaffolding, curing, racking of the joints T&P etc complete at all heights as per specification, drawing and as directed by Engineer in charge.( steel reinforcement will be paid separately under Steel reinforcement item)

Total (A)

Above