REPAIR TO PCC PATH, HARD STANDING, PERIMETER WALL, KERB STONES, CHEQURED TILES, INTERLOCKING TILES ETC AT TECHNICAL AREA UNDER GE (I) R and D KANPUR.

Amount

Demilotion of cement concrete (unreinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and directed

M&L for endura parking tiles size 300x300x10mm thick with grey cement and no pigment set, jointed and pointed in neat cement slurry as in floors colour over cement screed bedding 15mm thick in cement mortar (1:6) including dismantling floor, hearth of wall tiling and cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises out of MD land complete all as specified and directed.

M&L for 75mm thick cement concrete type D-2, 1:4:8 (40mm graded aggregate) as in sub base of hardstanding complete all as specified and directed.

M&L for cement concrete type B-0, 1:2:4 (12.5mm graded aggregate) as in padding of roof finishined cement concrete surface even and fair without using extra cement complete all as specified and directed.

M&L for providing cement concrete type B1 1:2:4 (20mm graded aggregate) as in roof kerbs, rounded or chamfered on edge and padding complete all as specified and directed

M&L for 75mm thick PCC type C-2, 1:3:6 (using 20mm grade aggregate) laid in alternative bays as in plinth protection / hardstanding, including finishing the surface even and smooth without using extra cement and filling the joints with mastic filling i.e one part of bitumen 85/25 and 3 parts of sand by weight, complete all as specified and directed.

18mm thick granite any colour machine cut, such as in steps, platform, vertical surfaces laid over cement screed and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including 15mm thick screed bed on fair faces of brickwork or conctrete surface in CM 1:3 complete all as specified and directed.

M&L for half edge moulding to 18-20mm thick granite stone of any description such as in steps, platform, shelf etc. including machine polishing to edge to give high gloss finish etc. complete. complete all as specified and directed.

M&L for machine pressed precast cement concrete interlocking paver block of size confirming to IS-15658-2006 of 60 mm thickness, M-35 grade with grey cement and with pigment or without pigment. Shape and size approved by GE.

M&L for providng 25mm thick sand crushioning under interlocking tiles complete all as specified and directed.

M&L for chequered cement concrete tiles 30cmx30cmx25mm thick, set, jointed and pointed in neat cement slurry in floors with grey cement and pigments and including screed bed or bedding layer of mortar 15mm thick for laying floor finishes in CM 1:6 complete all as specified and as directed.

M&L for old size brickwork in subclass 'B' bricks, straight or curved on plan exc 6m mean radius, built in CM 1:6 including demolition of brickwork or stone/boulder masonry, built in cement mortar including all quions, arches, pillars etc but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and as directed.

M&L for brickwork with sub class 'B' bricks, straight or curved on plan to any radius in half brick thick wall built in CM 1:4 including demolition complete all as specified and as directed.

M&L Rendering 15mm thick on fair faces of brick work or concrete surfaces in cm 1:4 including taking down old finishes, complete all as specified and directed.

M&L Rendering 15mm thick on other than fair faces of brick work or concrete surfaces finish even and smooth (without using extra cement) in cm 1:6 including taking down old finishes, complete all as specified and directed.

Removal of demolished material from site and disposed off exceeding 500 metre but not exceeding 1.00 kilometre and deposited where directed at a level not exceeding 1.5 metre above the starting point complete all as specified and directed.

S&F PVC pipes, single socketed, in any length with rubber ring 110mm dia fixed in wall including taking down complete all as specified and directed.

M&L for preparation of old decorated surfaces of walls by brooming down or steel wire brushing, scraping down of lime scale, smoke soot, trading oil and greasy spots etc and applying one coat of cement base paint on old painted surface of wall complete all as specified and directed.

M&L for preparation of newly plastered surface of wall and applying two coats of cement base paint over a coat of cement primer, complete all as specified and directed.

M&L for providing precast cement concrete type B1 1:2:4 (20mm graded aggregate) in landings, cover slabs (for manholes etc), drain, chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces complete all as specified and directed.

S&F TMT mild steel bars, 6 mm to 8 mm dia and over, cut to length, bent to shape required, including cranking, beinding spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips quality conforming to Fe 290(Gde E-165) complete all as specified and directed.

Excavation in trenches, n exc 1.5m wide and n exc 1.5m in depth, for foundation etc or for shafts well, cesspits, manhole, pier holes etc n exc 10 sqm on plan and n exc 1.5m in depth and getting out soft/loose soil complete all as specified and directed.

Removal of excavated material from site and disposed off exceeding 500 metre but not exceeding 1.00 kilometre and deposited where directed at a level not exceeding 1.5 metre above the starting point complete all as specified and directed.

M&L for preparation of old surfaces of walls by brooming down or steel wire brushing, scraping down of lime scale, smoke soot, trading oil and greasy spots etc and applying one coat of colour wash on old decorated surface of wall complete all as specified and directed.

Dismantling including cutting wrought iron or mild steel work of any description not other wise provided for complete all as specified and directed.

S&F for grating on drain cover with welding hand rails, half round or other steel section or core for wooden hand rail straight portion, drilled and countersunk for balusters running bards, for doors, balusters, nosing to steps including embedding in concrete and screwing etc wind ties for roof including securing bolts, posts and struct in fencing including cutting top to shape as directed, drilling holes, notchhing for wire, etc; flat iron fillets (for securing wire mesh) etc including all necessary dirlling, bolting or riveting etc and similar work conforming to Fe 290 Gd E-165 complete all as specified and directed.

Taking down existing cover slab and refixing at same place in CM 1:6 complete all as specified and directed.

m/s sahu enterprises

Lalta Prasad vijay kumar Forwarding Agency

M/S PASHUPATI TRADERS

VIJAY CONSTRUCTION COMPANY