Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹26.3 LAccepted-AOC C O BALAJI GLASS HOUSE OPP SBI MATHGHARIA NARENGI TINIALI GUWAHATI KAMRUP M ASSAM 781026 | KAMRUP METRO | ASSAM | 781026 | L1 | Accepted-AOC Lowest Bidder | |
| 2 | L2₹27.5 L+₹23,872.50 (0.87%)Rejected-Finance H NO 18 BY LANE NO 09 SATGAON PRAGATI NAGAR GUWAHATI ASSAM 781171 | KAMRUP METRO | ASSAM | 781171 | L2 | Rejected-Finance Other than lowest bidder | |
| 3 | L3₹30.7 L+₹3.4 L (12.4%)Rejected-Finance | L3 | Rejected-Finance Other than lowest bidder |
Tender Value
₹30 L
EMD Value
₹60,000
Closing Date
24 Jul 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE Narangi
GE Narangi C/o 99 APO
REPAIR MAINT OF BR EXTERNAL SERVICES AND MES INSTALLTIONS IN THE AOR OF AGE BR II UNDER GE NARANGI
2023_MES_596971_2
8860/B/E8
Open Tender
Civil Works
Item Rate
180 days
GE Narangi
Please refer Tender documents.
8 documents required · 8 mandatory
₹500
Yes
GE Narangi
₹60,000
Yes
8 Aug 2023
1 Jul 2023
26 Jul 2023
1 Jul 2023
24 Jul 2023
10 Jul 2023
Amount
Demolition of plain cement concrete (Un-reinforced) in ground floors and paving exc 15cm thickness (below or above ground level) including removal of spoils/ demolished materials not exceeding 50m and depositing complete all as specified and directed.
Demolition of cement concrete ( unreinforced) of any description and in any position not otherwise specifically provided for complete all as specified and directed.
Demolition of cement concrete ( reinforced) of any description and in any position not otherwise specifically provided for complete all as specified and directed.
M&L for PCC 1:2:4 type B-1 (using 20mm graded stone aggregate) as in coping/benching including necesssary formwork complete all as specified and directed.
M&L for reinforced cement concrete 1:2:4 type B-1 as in slabs supported on walls , beams and columns in floors, roofs, landings, balconies, casnopies, deck slabs and in shelves and the like complete all as specified and directed.
Dismantling of asbestos cement sheet (corrugated or semi corrugated etc) as in roof covering complete all as specified and as directed.
M&L 6mm thick asbestos cement, corrugated or semi-corrugated sheets fixed with L-type or J-type or cranked hook bolts in roofs/ walls etc.complete all as specified & as directed.
M&L 6mm thick asbestos cement two piece adjustable serrated ridge for corrugated or semi corrugated sheets.fixed with L-type or J-type or cranked hook bolts with washer in roofs/ walls etc.complete all as specified & as directed
Dismantling of plain or corrugated steel sheeting, any gauge or any thickness as in roof covering, wall cladding etc., complete all as specified and as directed.
M&L Pre- painted hot dip aluminium Zinc alloy metalic coated trapezoidal profile steel sheet 0.50mm thick ( Total coated thickness), any pattern corresponding to IS 15965 : 2012 of durability class 3, atmospheric classification category 3, coating class AZ 150 of an approved colour having yield strength of 550 Mpa as in roof covering/wall cladding, fixed with self tapping screws complete all as specified and as directed.
M&L Pre- painted hot dip aluminium Zinc alloy metalic coated plain steel sheet 0.50mm thick ( Total coated thickness), any pattern corresponding to IS 15965 : 2012 of durability class 3, atmospheric classification category 3, coating class AZ 150 of an approved colour having yield strength of 550 Mpa as in roof covering/wall cladding, fixed with self tapping screws as specified complete all as specified and as directed. Note: To be executed for provision of ridges valley and hips.
S&F 0.63 mm thick galvanised corrugated mild steel sheeting with two corrugation side lap, fixed with 'L' type or 'J' type or cranked hook bolts and washers, in roof covering, walls cladding etc, with grade of zinc coating 275 complete all as specified and as directed.
Refixing only galvanised corrugated mild steel sheeting as obtained from dismantling of old sheets here in before with two corrugation side lap, fixed with & including 'L' type or 'J' type or cranked hook bolts in roof covering, wall cladding etc., complete all as specified and as directed.
S&F in repairs, suspended false ceiling using E-grid 2430, 180 GSM (exposed ceiling suspension system ) of grid size 600mmx600 mm with main runner 38 mm x 24 mm and wall angle 24mm x 24mm using 4mm thick High Pressure stean Crude Everest Non Asbestos Fiber Cement plain Board (E-Board Classic) in & including a grid of GI system duly suspended with 4mm dia GI wire hanger fixed with steel dash fasteners or iron purlin from the roof with adjustment clip providing positions for light fixtures,air conditioning diffuser and ducts ,sprinkler ,smoke detectors etc.The main runners to be secured to structural soffits by hanger @ 1220 mm maximum c/c. the last hanger at the end of each main runner should not be placed at more than 450mm from the adjucent wall,Flush fitting 1220 mm cross tee to be interlocked between main runners @ 610mm c/c,so as to form 600mm x 600 mm grid complete all as specified and as directed.
M & L for 75mm thick PCC 1:3:6, type C2 (using 40mm graded stone aggregate) as in plinth protection, etc finished the surface even and smooth without using extra cement including provision of joint of size 10 mm wide & 10 mm deep and filling with bitumen mastic joint filling at every 3m length and at corners complete all as specified and as directed.
M&L for 100mm thick PCC 1:4:8 Type D-2 (using 40mm graded crushed stone aggregate) as in sub base complete all as specified and as directed.
M&L for 75mm thick PCC 1:3:6 TypeC-1 (using 20mm graded crushed stone aggregate) as in sub base complete all as specified and as directed.
M&L for 25mm thick PCC 1:2:4 Type B-0 (using 12.5mm graded crushed stone aggregate) as in floor finished rough complete all as specified and as directed.
M&L for 150mm thick PCC 1:2:4, type B-2 (using 40mm graded stone aggregate) as in hardstanding complete all as specified and as directed.
M&L for 75mm thick PCC 1:3:6 Type C-1(using 20mm graded crushed stone aggregate) as in floor/ path/paving/ hard standing and finishing the surfaces even and fair without using extra cement complete all as specified and as directed.
Demolition of brick ( laid flat or on edge) or brick tiles in floors, channels, kerbs, aprons etc. ( each layer0 pointed in any mortar complete all as specified and as directed.
M & L for brick work with sub class B bricks old size (locally available best quality)laid flat into sides of drain, bedded and jointed in CM 1:6 and pointed in CM 1:3 complete all as specified and as directed.
All as per item No. 22 above but except bricks. ( Serviceable bricks shall be obtained from demolition of old brick work) complete all as specified and as directed.
M & L for brick work with sub class B bricks old size (locally available best quality)laid on edge of drain bedded and jointed in CM 1:6 and pointed in CM 1:3 complete all as specified and as directed.
All as per item No. 24 above but except bricks. ( Serviceable bricks shall be obtained from demolition of old brick work) complete all as specified and as directed.
Demolition of brick or stone masonry work built in cement mortar including all quoins, arches, pillars etc complete all as specified and as directed.
M & L for brick work with sub class B bricks old size (locally available best quality) straight or curved on plan exc 6 m mean radius, built in cement mortar 1:4 complete all as specified and as directed.
M & L for brick work with sub class B bricks old size (locally available best quality) straight or curved on plan exc 6 m mean radius, built in cement mortar 1:6 complete all as specified and as directed.
All as per item No. 28 above but except bricks. ( Serviceable bricks shall be obtained from demolition of old brick work) complete all as specified and as directed.
M & L for half brick work with sub class 'B' bricks old size (locally available best quality) straight or curved on plan to any radius, built in cement mortar 1:4 complete all as specified and as directed.
Taking down cement plaster on walls, chajja surfaces, etc including raking out joints, hacking for key, scrubbing down with water complete all as specified and as directed.
M&L for rendering 5mm thick in cement mortar (1:3) on fair faces of RCC concrete surfaces and including applying cement slurry in bottom of slab, chajjas, fin, facias etc. complete all as specified and as directed.
M & L for rendering 15 mm thick in cement mortar (1:4) on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement complete all as specified and as directed
M & L for rendering 15 mm thick in cement mortar (1:6) on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement complete all as specified and as directed
M&L for preparation of old plastered surfaces of ceiling and applying one coat of white wash complete all as specified and as directed.
M&L for preparation of old plastered surfaces of wall and applying one coat of white wash complete all as specified and as directed.
M&L for preparation of newly plastered surfaces of wall and applying three coats of white wash complete all as specified and as directed.
M&L for preparation of newly plastered surfaces of wall and applying two coats of cement base paint over a coat of primer complete all as specified and as directed.
M&L for Complete removal of existing treatment of wall surfaces and applying two coats of oil bound distemper over a coat of primer complete all as specified and as directed.
M & L for complete removal of old treated surfaces on walls and applying two coats of cement based paint over a coat of primer sanding the surfaces till smooth finish is obtained complete all as specified and as directed.
M&L for preparation of new wood or wood based surface of any description exceeding 10 cm width or girth and applying two coats of synthetic enamel paints over a coat of pink primer complete all as specified and as directed
M&L for preparation of new steel or iron surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paints over a coat of red oxide, zinc chrome primer complete all as specified and as directed.
M&L for preparation of new steel or iron surfaces of any description not exceeding 10cm width or girth and applying two coats of synthetic enamel paints over a coat of red oxide, zinc chrome primer complete all as specified and as directed.
M & L for preparation of old wooden surface over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.
Dismantling floor, hearth or wall tiling including cement mortar bedding but not backing complete all as specified and directed.
M & L for coloured non skid ceramic tiles 7 to 8 mm thick (Square/rectangular) area of each tile exc 0.06 sqm but n.exc 0.11 sqm, laid in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tile over and including 15mm thick screed bed in cement mortar 1:4 complete all as specified and as directed.
M & L for coloured non skid ceramic tiles 7 to 8 mm thick (Square/rectangular) area of each tile exc 0.18 sqm but n.exc 0.38 sqm, laid in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tile over and including 15mm thick screed bed in cement mortar 1:4 complete all as specified and as directed.
M & L for coloured non skid ceramic tiles 7 to 8 mm thick (Square/rectangular) area of each tile exc 0.18 sqm but n.exc 0.38 sqm, as in vertical surfaces such as skirting/dados etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tile over and including 10mm thick screed bed in cement mortar 1:4 complete all as specified and as directed.
M&L for glazed ceramic coloured tiles 300mmx200mmx 7mm thick/450mmX300mmX7mm thick, set and jointed in neat cement slurry and pointed in coloured cement as in vertical surfaces such as skirting, dados and risers to steps over and including 10 mm thick rendering in cement mortar (1:4) complete all as specified and directed.
M&L for machine cut kota stone slab flooring 20 to 25 mm thick over cement screed base, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab laid over and including 20 mm thick screed in cement mortar (1:4) with rubbing and polishing including demolition of old slab/tiles of any description complete all as specified and as directed.
M&L for 20-25mm thick Kota stone slab in riser of steps, skirting, dado and pillar laid over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing over 10 mm thick screed bed in CM 1:3 complete all as specified and directed.
M&L for pre polished chequered cement concrete tiles in floor, area exc 0.06 Sqm but not exc 0.11 Sqm, 25 mm thick with white cement and pigments of approved make jointed with cement slurry and pointed with white cement mixed with colour pigment to match with the tiles over and including screed bed of 20 mm thick cement mortar (1:4) including dismantling of old tiles of any description complete all as specified and as directed.
M&L Machine pressed precast concrete interlocking paver block with grey cement and pigment any shape and size confirming to IS 15658-2006 of 60mm thickness, M-35 grade with 30mm thick sand cushion including filling the joints with sand including demolition of old slab/tiles etc. complete all as specified & as directed.
M&L Machine pressed precast concrete interlocking paver block with grey cement and pigment any shape and size confirming to IS 15658-2006 of 80mm thickness, M-40 grade with 30mm thick sand cushion including filling the joints with sand including demolition of old slab/tiles etc. complete all as specified & as directed.
Dismantling wrought iron or mild steel work of any description not otherwise complete all as specified and as directed.
S&F Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161-1979 grade St.-240 complete all as specified & as directed.
S&F rolled mild steel plates ( plain or chequrred) channels, square cut or notched ( ordinary or counter sunk) forming holes, with riveted, bolted or welded attachment complete all as specified & as directed.
S&F 1.25mm thick mild steel plain black sheet in wall cladding steel gates and similar works, cut to size, holes punched, including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40mm lap joints with riveted or welded seams, including bending or turning up, mitred angles etc. as required complete all as specified & as directed.
S&F rolled mild steel framed works as in doors or gates of angle or other section with gusset plates,, rails, braces etc complete drilled for fixing of steel sheeting or other covering doors etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings ( exclusive of steel sheeting or other covering, running rails and guides) and hangings also fastening and fixing etcconforming to Fe.410-W ( Gde E-250) quality B complete all as spoecified and directed..
Dismantling.posts or struts of any section Wood, steel or RCC),embeded in natural ground ,including taking out embedded portion and making good disturbed ground complete all as specified and directed.
Dismantling.posts or struts of any section Wood, steel or RCC),embeded in concrete ,including taking out embedded portion and making good disturbed ground complete all as specified and directed.
Excavating in post holes (or similar holes) each not exceeding 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, watering, and removing surplus soil to a distance n exc 50m and making good surfaces in soft/loose soil complete all as specified & as directed.
M&L PCC (1:4:8) type D-2 (using 40 mm graded stone aggregate) in foundation filliing and mass concrete complete all as specified and as directed.
M&L PCC (1:3:6) type C-2 (using 40 mm graded stone aggregate) in foundation filliing and mass concrete complete all as specified and as directed.
M&L PCC (1:3:6) type C-2 (using 40 mm graded stone aggregate) in surface channel and drain complete all as specified and as directed.
M&L extra for forming fair finished drain or channel 30cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends etc. complete all as specified and directed.
M&L for mild steel Bands,supports,or stays for rainwater, ventilating pipes, including bolts if required, hooks( stay) , heavy, for large gates, hooks and pintle hinges, large hasp and staples, chains, hand made sliding bolts, clamps, holdfasts, wall ties, hooks for hanging fans, plain angle claets for securing purlins to wood trusses or rafters, knee piece inserts, two way or three way starps, plate washers and similar small articles quality confirming to Fe290-Gde E-165 complete all as specified & as directed.
S&F mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed end to be fitted with washers and one hexagonal or square nut, length of bolt exc 5cm and n exc 10cm long 11 to 15mm dia of shank complete all as specified & as directed.
M&L mils steel angle iron posts and strurts in fencing including cutting tops to shape, drilling holes , notching for wire etc . Including all necessary drilling, bolting or rivetting and similar work confirming to Fe-290 Gdw E-165 complete all as specified and directed.
M&L for TMT bars10mm dia and over cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.90mm dia or securing with clips complete all as specified & as directed.
M&L for Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landing and similar works, not exceeding 200mm thick ( Horizontal or sloping) complete all as specified and directed.
S&F Rolled mild steel joist, channel, angle or tee sections, fixed independently , with connecting plates etc. ( cut to ordinary lengths i.e within 20mm of the length indicated) as in fencing post, struts etc. bend to shape required, including drilling holes , notches cut out to receive MS bolts and barbed wire embedded to concrete including tarring to steel work in embedded portion complete all as specified & as directed.
Supply onlyr mild steel round bars10mm dia as in stiffener to chain link fencing including necessary cutting etc.complete all as specified & as directed.
M&L for TMT 5mm dia and over upto 10mm dia cut to length, bent to shape required, including cranking, bending spirally as in stirrups , spacers and binders including mild steel wire (annealed) not less than 0.90mm dia or securing with clips complete all as specified & as directed.
M&L RCC 1:2:4 type B-1 as in precast posts, fencing posts, staining or terminal posts, struts etc. for fencing average sectional area not exceeding 100 sqcm with or without chamfered angles and flat, splayed, rounded, or mitred tops as directed and fixed .
Dismantling fencing wire of any size and description complete.
Supply only chain link fencing wire mesh of 50X50mm/75X75mm size or type, made with 4 mm dia mild steel galvanised wire complete all as specified and as directed.
Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolt etc including provision of binding wire complete all as specified and as directed
S & F in repairs galvanized two strand, steel barbed wire 2.24 mm dia barbed with 2 mm dia bars at 75 mm spacing and straining and fixing to RCC / steel post etc., including securing or tying at crossing with and providing of galvanized mild steel wire, staples or steel pins, etc., (each line of wire to be measured separately) complete all as specified and as directed.
S & F in repair providing and fixing 610mm dia Razor Concertina coil fencing with and including required clips, pins, etc. as per manufacturer's instruction and as per specification fixed on the Y angle. Each concertina coil shall be fixed to MS angle with existing rows of barbed wire on each of Y angle. There shalll be 80 ( eighty) circles in each 9.00 mtr length. Number of clips in each 9.00 mte shall be 200 Nos., central core wire 12 SWG hot galvanised high tensileed wire : UTS- 145-160 Kg/Sqmm. Razor strip 0.50mm thick hot dipped galvanised and of length 19mm, clips 1.5mm thick made of SSAISI 410 complete. ( Note: Measurment and payment shall be considered on length of security wall/ fencing and not actual length of concertina coil complete all as specified and as directed.
Taking down chowkats with shutters including builders hardware(without taking off shutters from the frame) area n.exc. 1.5 Sqm each complete all as specified and as directed.
Taking down shutter of any description exc 1 Sqm but n exc 2 Sqm each builders hardware and refixing in the same opening complete all as specified and directed.
Dismantling timber scantlings 40 sq. cm and over in section (unframed work), in any position complete all as specified & as directed.
M & L second class hard wood scantling fixed in clean sawn complete all as specified and as directed
S&F 30mm thick flush shutter, solid core construction with particle board core and plywood face panel, commercial type on both side complete all as specified and directed.
S&F aluminium anodised glazed shutter ( single/double shutter) divided into two portion , locking rail in middle as per standard engineering practice and section of top and bottom rail 101.60mmX25mmX2.5mm thick ( 19556) , lock rail section 150mmX44.45mmX2.65mm thick (20002) style section 85mmX44.45mmX2mm thick (19560) with aluminium glazing clip @0.154 kg/Rm (19377), aluminium anodised frame rectangular section of size 100mmX50mmX2.80mm thick(14087) alongwith cleat including other accessories like 5.5mm thick tinted glass, floor spring, hydrolic door closer, rubber beading , door handle, mortice lock 4 lever complete all as per Jindal aluminium ltd specified and as directed.
S&F aluminium anodised twin/three track sliding window of extruded section of anodised glazed shutter as per standard engineering practice with section of top/bottom rail 37.50mmX23mmX1.30mm thick (20689) A series, aluminium shutter side ( interlocking) handle section, frame top and both side of size 75mmX26mmX1.00mm thick (20672) A series and bottom section 75mmX26mmX1.00mm thick (20671) including 5.00mm thick glass panes exceeding 0.50 sqm in each pane , SS wire cloth 0.36mm , aluminium hinges , handle , rubber beading all as per Jindal aluminium ltd Cat K-2005 complete all as specified and as directed.
S&F box type steel window with side hung shutters both mosquitto proof and glazed shutter including projecting type hinges with steel handle and steel peg stay with glazing bars and 12 mm square bar or round bar of approved design welded to steel window frame dovetailed or welded complete all as specified & as directed .
S & F 150 mm long aluminium anodised barrel tower bolts of extruded section complete all as specified and directed.
S&F 150 mm extruded aluminum alloy handles, fabricated type, anodized all as specified and directed.
S & F Mild Steel butt hinges 100 mm size, medium weight cold rolled and fixed complete all as specified and as directed.
S & F 300 mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed complete all as specified and as directed.
S&F in repair Aluminium body ( extruded section) Door closure hydraulically regulated designation no.3 universal type suitable for door shutters of 851to 1000mm in width and weight between 61 to 80 Kg and fixed complete all as specified and directed.
S&F in repair stain less steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with tinned tacks or aluminum wire staples complete all as specified and directed.
S&F stain less steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with tinned tacks or aluminum wire staples complete all as specified and directed.
Taking down steel rolling shutter, area of each shutter not exceeding 12.00 sqm each of any type and description including cover, anchoring rod, manual / gear operated type and carrying out neccessary repair/ replacement work to defective components such as pulling system , locking plate, guide channel, bracelet plate etc and reassembling the rolling shutter including greasing, welding, drilling where required and refixing the shutter in the existing location and making functional to the entire satisfaction of the Engineer in charge complete all as directed. ( Note: The materials replaced under this item shall be measured and paid seperately as " Supply only" under relevent items of this schedule. The shutter shall be removed carefully alongwith its accessories without damaging the adjacent structure. All the defective parts to be repaired/ replaced under this item shall lay out at site for proper verification and approval of the Engineer in charge and shall be repaired /Replaced only after prior approval of the Engineer in charge. Necessary greasing easing will be done to the appropriate parts/ spares/ fixtures for smooth functioning of the shutter.
Supply only 100mm dia, 450mm long, SWG 'O' high tensile spring, thickness not less than 8mm size conforming to relevent IS complete all as specified and as directed.
Supply only roller of steel pipe ( shaft) heavy duty of size 50mm nominal bore complete all as specified and as directed.
Supply only ball bearing No. 6213/6214 complete all as specified and as directed.
Supply only locking plate made of 3.15mm thick mild steel reinforced with mild steel angle section of size 35x35x5mm complete all as specified and as directed.
Supply only guide channel made of mild steel deep channel section not less than 3.15mm thick and depth of channel 75mm complete all as specified and as directed.
Supply only mild steel clip suitable for rivetting to lath curtain complete all as specified and as directed.
Supply only lath section 1.20mm thick for shutter witdth exceeding 35m conforming to IS-6248 1979 ( Section of lath shall have a distance of 75mm between rolling centre) complete all as specified and as directed.
Supply only MS sheet 1.00mm thick as in hood cover complete all as specified and as directed.
Hacking out old broken glass (any thickness, quality or description) from wooden/steel frame or stone concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and as directed.
S & F 3mm thick sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sqm in each pane complete all as specified and as directed.
Taking up or down 15 mm bore GI tubing from trenches / wall including all fittings complete all as specified and as directed. Note : Excavation and earthwork if any shall be included in the quoted rate
S & F GI tubing 15mm bore, medium grade with all fittings and fixed complete to walls and ceilings or laid in floors complete all as specified and as directed.
Taking up or down 20 mm bore GI tubing from trenches / wall including all fittings complete all as specified and as directed. Note : Excavation and earthwork if any shall be included in the quoted rate.
S & F GI tubing 20mm bore, medium grade with all fittings and fixed complete to walls and ceilings or laid in floors complete all as specified and as directed.
M&L in repair 300mm bore RCC pipes class NP2 laid and jointed with collars complete all as specified and as directed.
M/L PCC 1:3:6 type C-2 ( 40mm graded aggregate) as in concrete bed to drain pipe 300 mm dia including packing under , and haunching against the sides of pipes after they are laid and tested complete all as specified and directed.
S & F in repairs, bib taps, 15mm dia cast copper alloy chromium plated, fancy type with crutch or butter- fly handles screwed down for iron pipe or for brass ferrule complete all as specified and as directed.
S & F 500 litres capacity rotational moulded polye-thylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I with and including 20mm bore dia ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed etc including dismantling of old tank of any description complete all as specified and directed.
SHANKAR ENTERPRISE
M/S M Ahmed and Co.
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .