Special repair to Bldg No C-131 and P-85 of Sup Pl ASC at Dalhousie Cantt

Amount

Sch 'A' Part-I B/R work:- Taking down chowkhets or frames with shutter (without taking off shutters from the frames) exc 1.50 Sqm and n.exc 4.00 Sqm each .

Taking down chowkats with shutter n. exc 1.5 sqm each. (without taking of shutter from the frame) .

S&F 2nd class hard wood, plain, solid straight chowkhets and frames, wrought framed and rebated on the solid rounded or chamfered, put together with glue pinned at joints complete.

S&F 2nd class hard wood, 40 mm thick plain, framed panelled shutters (any number of panels) with panels of timber flat on both sides (Feather edged) or of veneered particle board medium density, wood particle board with commercial face veneers, fitterd to chowkhets.

S&F 2nd class hard wood 35mm thick Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc with sash bars, edges of framing plain, chamfered or rounded. Fitted with cut and mitred beads for securing glass, etc sizes of members of shutters as specified in SSR part-I section 8 clause 8.24(a) , supplied and fitted to chowkats etc

S & F solid PVC door frames of sizes 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS Square tube complete all as specified and as directed.(Make Rajshri Plastiwood limited or Sintex)

S & F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top and bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC "C" channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail , lock rail and bottom rail on either side and as gap insert for top rail and bottom rail , panelling of plain colour PVC sheet to be fitted in the MS framewelded/ sealed to the stiles and rails with suitable PVC sheet beading , and jointed together with solvent cement in the frame at site as per specification.(Make Rajshri Plastiwood limited or Sintex)

S & F M.S. Flat iron as in hold fast and similar small articles, cut to length, bent to shape, drilled hole and fixed with screw etc. conforming to Fe 410-0 or F 310-0 complete

M&L PCC 1:2:4 type B-1 (using 20 mm graded crushed stone aggregate ) as in hold fast.

3mm thick sheet glass, ordinary qaulity,in sqaures n exc 0.5 sqm each panes etc all as specified.

S&F galvanised mild steel wire cloth, 0.63mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or galvanised wire staples etc all as specified.

S&F 150mm long aluminium anodised barrel tower bolt of extruded section and fixed.

S&F 300mm long aluminium alloy, anodised, sliding door bolt with hasp, stapple (bolt type) and fixing clips of sheet cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast aluminium alloy and fixed.

S&F 100mm mild steel butt hinges, medium weight, cold rolled and fixed.

S&F 150mm long extruded aluminium alloy handles fabricated type, anodised with screw bolt.

S&F 300mm long ordinary MS rat tail rod pattern springs incl roller and roller plate complete.

S&F pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc, complete all as specified

S&F mild steel window with side hung shutters including projecting type hinges with steel handles and steel peg stay with or without glazing bars dovetailed or welded complete with without glazing bars

S&F steel ventilator with top hung shutters including hinges and steel peg stay complete

S&F 5.5mm Thick Sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane

S&F framed works such as grills, grating etc with ends of bars shoulders and/riveted or forged into spikes , framed gaurd bars, barred iron doors, ladders, framed ballusters, walk ways, railings or frame work of water tanks or similar work confirming to Fe-290 Gde-165 complete all as specified.

M&L two coats of synathetic enamel paint over a coat of pink primer on new wood or wood surfaces, over 10 cms width or girth incl preparation of surfaces.

Preparing old painted wooden surfaces of any description, not otherwise described over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

Dismantling plain or corrugated sheets of any description or thickness and gauge as in roof covering.

Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified. (Make TATA or JSW)

Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified.(Make TATA or JSW)

S&F in repair harrison rails, mild steel, chromium plated with fixing brackets, stops, roller etc

Demolition of brickwork or stone buolder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles all as specified.

Brick work with sub-class `B' bricks, straight or curved on plan exceeding 6 M mean radius built in cement mortar 1:6

Use and waste of formwork for foundation beams floor beam roof beam etc as in lintel over 1.5m clear span. for rough finished surfaces

Taking down cement plaster on brick or stone walls, etc .including raking out joints, hacking for key, scrubing down with water etc .

M&L for rendering 10mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6 without using extra cement complete all as specified.

M&L for rendering 15mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 without using extra cement complete all as specified.

Preparing new plastered surfaces of wall and applying two coats of cement based paint over a coat of white wash all as specified .

Preparing new plastered surfaces of wall and applying two coats of oil bound distemper over 3mm thick wall care putty on walls etc all as specified .

Preparing old plastered surfaces of wall and applying one coat of cement based paint all as specified .

Preparing old plastered surfaces of wall and applying one coat of oil bound distemper etc all as specified .

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises etc all as specified.

M&L for joint free non skid cereamic coloured tiles 7 to 8mm thick (square/ rectangle) area of each tiles exceeding 0.18 sqm but n. exc.0.36sqm, in floor etc set and joined in neat cement slurry and pointed in white or .coloured cement to match complete all as specified and directed.

M&L for non-skid ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.06 Sqm but not exceeding 0.11 sqm , in floors etc . Set and jointed in neat cement slurry and pointed in while or coloured cement to match etc all as specified. (Make: Kajaria , Cera ,Somani)

M&L for screed bed or bedding layer of mortar 1:6 15mm thick for laying floor finishes etc all as specified.

M&L glazed, coloured, ceramic, tiles of size (450mm x 350 mm) x 7 mm thick, on vertical surfaces, such as dadoes, etc set and jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of tiles all as specified and directed.

M&L for 10mm thick rendering in cement moratr 1:4 as in backing coat for skirting/dados etc all as specified.

S&F in repairs vitreous China wash down water closet semi-pedestal pattern (Anglo-Indian Type) pan (pedestal pattern) white, excluding flushing cistern & flush pipe .

S&F in repairs, self cleaning water jet, chromium plated, (HEALTHFUSET)15 mm bore with all accessories complete suitable for EWC as approved.

S& F in repair PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve float and handle including brackets (10 ltr) including mild steel tube 32mm dia flush pipe..(Make: Jaguar, Parry ware or Cera).

S&F in repair vitreous china wash basin agle back, size 600x480 mm white, excluding taps, waste, chain and plug and porcelain stopper but including brackets all as specified and as directed .(Make: Jaguar or Parry ware )

S&F in the wall soap dish, vitrious china white, approximate size 160x160x90 in repairs

Taking up or down 15mm bore steel tubing and connections,including cleaning for refixing or removal to store.

S & F 15 mm dia GI tubing medium grade with all fittings and fixed complete to walls or laid in floors.

Taking up or down 20mm bore steel tubing and connections,including cleaning for refixing or removal to store.

S & F 20mm dia GI tubing medium grade with all fittings and fixed complete to walls or laid in floors.

S & F in repair 15mm bore Bib taps, chromium plated fancy type with crutch or butterfly handle, screwed down screwed for brass ferrule and fixed.(Make Jaguar, ESS ESS OR GEM MARC).

S & F in repair 15 mm bore Brass CP mixer for mixing hot & cold water screwed down for iron pipe

S&F in repair 15mm bore Stop valve fancy type, chromium plated, screwed down, high pressure, with crutch or butterfly handle, screwed bath ends for iron pipe or fixed union and fixed.(Make Jaguar, ESS ESS OR GEM MARC).

Grating doom round 140mm size of PTMT (minimum weight 50gms)

S&F in repairs brass chromium plated tubular towel rail,20mm dia, D type, 60cm long between flage.

PVC connection 15mm size with PTMT nuts of length 600mm

Dismantling of water tanks and removing to store of capacity exc 250 Ltr & N exc 500 ltr etc all as specified.

Dismantling water tank and removing to stores exc 500ltr n.exc 1000ltr

S&F 500 ltr capacity Rotational moulded polythylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified.

S&F 1000 litres capacity rotational moulded polyethylene water storage tanks (Cylindrical vertical with closed top), hoisted and fixed in position all as specified in SSR Part I.

Dismantling wrought iron or mild steel works of any description not otherwise provided for.

S&F wind ties for roof including securing bolts posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165; complete all as specified and as directed.

S&F Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. and similar work conforming to Fe-290 Gde E-250; complete all as specified and as directed.

S&F Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, water staging etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete

M&L preparation of new steel and iron surfaces of any description n exc 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide, zinc chrome primer complete all as specified and directed.

Preparing new steel surfaces of any description, not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a priming coat of red oxide complete all as specified and directed.

M & L PCC 1:3:6 type C-2(using 40mm graded crushed stone aggregate) ,75 mm thick as in plinth protection & finishing the surface even & fair W/o using extra cement complete all as specified and directed.

M/L 100 mm thick Cement concrete type B2, 1:2:4 (using 40 mm graded granite crushed stone aggregate) in base of flooring/ hard standing finished evern & smooth w/o using extra cement..

M&L chequered cement tiles concrete 25cm x 25 cm x 22mm thick, set jointed in neat cement slurry in floor .

Dismantling timber scantlings 40sq.cm and over in section, in any position.

M&L second class hard wood clean sawn in scantling

Dismantling wall and ceiling boards (fibre, pulp, insulation etc.) any thickness, including cover fillets as directed.

S&F 4mm thick Non asbestos fibre cement building boards of any size fixed or laid/inserted to timber/GI/Aluminium framework with screws and providing two coats of white wash including preparation of surfaces complete all as specified.

M&L cover fillets of hard board,40mm wide and fixing with screw 6mm thick etc

M&L preparation of new wood and wood based surfaces of any description n exc 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

S&F Cast Iron soil Waste and Vent pipe in any length with or without ears with cement joints laid in in floors/wall of 100mm bore all as specified complete all as specified and fixed in repair all as directed

All as pe srl item No. 79 here-in-before but fixed to wall of 75mm bore pipe

Bends ( any radius ) with duck foot or heal rest for 100 mm bore pipe fixed in repair including taking out old fittings complete all as specified.

All as pe srl item No. 81 here-in-before but 75mm bore pipe

CI branch pieces single (equal or unequal) ordinary or inverted (spigot or socket type ) or with parallel branches for 100mm bore pipe fixed in repair including taking out old fitting complete all as directed with oval access door fixed in repairs.

All as pe srl item No. 83 here-in-before but 75mm bore pipe.

Sch 'A' Part-II E/M work:- Taking down carefully copper/aluminium point wiring in PVC casing caping /PVC surface conduit/concealed PVC/steel conduit (light ,fan,socket or power) complete fixture and fittings such as switches ,ceiling rose, regulators,sockets etc removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separatly) and making good disturbed surfaces of wall, floors etc.

M & L for point wiring with copper conductor cable multistrand, PVC unsheathed 1.5 Sqmm size for one light point ,fan point, exhaust fan point,or bell point controlled by one switch including one run of 1.5 Sqmm multistrand PVC sheathed copper conductor cable for earth continuity in PVC Concealed conduit of approved size and quality ISI marked in Brick machinary/Stone machinary wall complete including cutting, chasing, pinning and making good the disturbed surfaces by using cement mortor 1:3 of wall by providing cement plaster and matching the surfaces by white wash/colour wash all as per existing finishes complete including all other required accessories as specified in Preamble 1(a) to (q) of section 19 of SSR Part-II under heading "Point wiring".fixed on walls/ceiling including sunk cast iron terminal boxes grouting/ flushing on wall for mounting fittings like switch, sockets etc covered with 3.00 mm thick plastic laminated sheet top cover complete all as specified and directed by Engr-in-charge.

All as per Srl item No 86 here in before but for one 5 amps socket out let on same board.

All as per Srl item No 86 here in before but for one 5 amps socket out let on independent board.

All as per item No 86 here-in-before but for power point 3 pin switch socket 15 Amp with PVC insulated copper conductor cable multistrand unsheathed 2.5 Sqmm on independent board including one run of 1.5 Sqmm multistrand PVC sheathed copper conductor cable for earth continuity in cocealed PVC conduit of appropriate size and best quality ISI marked, including suitable size of copper lugs and all other required accessories as specified in preamble 1(a) to (q) of Section-19 of SSR Part-II under heading "Point wiring" fixed on wall including sunk cast iron terminal boxes grouting/ flushing on wall for mounting fittings like switch, sockets etc covered with 3.00 mm thick plastic laminated sheet top cover all as specified and as directed.

Supply & Fixing Switch piano, flush button, single pole one way 5 Amps

Supply & Fixing Socket outlet 3 pin, 5 amps flush type.

Supply & Fixing Switch piano, flush button, single pole one way 15 amps

Supply & Fixing Socket outlet 2 in 1,3 pin 5 and 15 amps flush type.

Supply and fix ceiling rose 65X50 mm three terminals complete all as specified.

Supply and fix lamp holder for batten/angle fitting.complete all as specified and as directed

S & F 7 watts B22 CDL 3 STAR LAMP LED 6500 K complete all as specified and as directed Make- Cat Part :- LHLDEUEEML8R007 of Havells/ Cat Part :- N71001of Wipro,or equivalent in Philips/Bajaj all as specified and as directed.

S & F in replacement defective LED ultra mordern recess mounting luminaire with high brightness SMD LED as light sources, suitable for Armstrong/Grid ceiling. fixture in mm (LXWXH) 600X600X70 of make :- Crompton Cat part No-LCPL-36-CDL(2x2) / C&S cat part No-CYGNUS-C/36W/2X2/W /Bajaj Cat part No-BZRSQL 36W GZi WH LED, complete all as specified and as directed.

S & F Wall mounted LED integrated batten fitting 20 W LED T-5, 4 feet, PVC extruded.Including all accessories complete all as specified and as directed by Engr-in- charge. Make:- Havells cat part No-LHEXACP7IN1W020 or equivalent in C&S Cat part No LTTB4F20WLEDP/W or Phlips cat part No- BN021C LED 20S PSU NW GR

S & F LED bulk head light fitting 10 Watts. Make :- Havells Cat Part No- HEXAFT10WLED857SSYMBOPC / Cat Part CG80IB10WLED of C&S or LBHE-10-CDL of Crompton or equivalent in Havells/Bajaj, complete all as specified and directed.

Supply and fixing street light bracket made out of 32 mm dia light grade GI pipe 1.5 mtr long bent in shape required fixed to pole/ wall with two Nos MS clamps made out of 25x4mm thick flat including nuts and bolts and washer etc complete for fixing of street light fitting including taking down existing.

Supply & fixing Building street light luminaire, LED street light 30 watt, IP66 Powder coated pressure die cast aluminium compact High Power LED Street light with heat resistant toughened glass. Cat Part No- ENDURACITYLITEPLAT PLUSSL30WLED757SASYBOPC of Havells/ LSTS-30-CDL of crompton or equivalent as in Phillips / Bajaj as approved by Engineer-in-Charge including taking down existing any street light fitting.

M & L for sub main wiring with 6.0 sqmm copper conductor cable multistrand, PVC sheathed two run (as phase and neutral) and run 4.0 Sqmm multistrand PVC sheathed copper conductor cable for earth continuity in drawn in one pvc concealed conduit wiring in Brick machinary / Stone machinary wall complete including cutting, chasing, pinning and making good the disturbed surfaces by using cement mortor 1:3 of wall by providing cement plaster and matching the surfaces by white wash / colour wash all as per existing finishes complete all as specified and directed by Engr-in-charge.

Supply & Fixing Sheet metal enclosure for SPN DB,s, double door (when MCB,s to be used) single pole & neutral 4 way with 200 amps rated bus bar 240 volts with fixing arrangements including taking down ICDP/DB's/ kitkat fuse/MCB SPN/SP of any type as directed by Engineer-in-charge. Cat Part No CSDBSPNDD04 of C&S, or equivalent in Havells/Legrand

Supply & Fixing Sheet metal enclosure for SPN DB,s, double door (when MCB,s to be used) single pole & neutral 6 way with 200 amps rated bus bar 240 volts with fixing arrangements including taking down ICDP/DB's/ kitkat fuse/MCB SPN/SP of any type as directed by Engineer-in-charge. Cat Part No CSDBSPNDD06 of C&S, or equivalent in Havells/Legrand

Supply & Fixing Sheet metal enclosure for SPN DB,s, double door (when MCB,s to be used) single pole & neutral 8 way with 200 amps rated bus bar 240 volts with fixing arrangements including taking down ICDP/DB's/ kitkat fuse/MCB SPN/SP of any type as directed by Engineer-in-charge. Cat Part No CSDBSPNDD08 of C&S, or equivalent in Havells/Legrand

Supply and fixing inreplacement MCB single pole and neutral 40 amps, 240 volts complete all as specified and directed. Make:- C&S Cat Part No-CSMBS1C40N/Havells Cat Part No DHMGCSNF063 /Legrand Cat Part No-4086 18

Supply and fixing inreplacement MCB single pole and neutral 6 to 32 Amps, 240 volts complete all as specified and directed. Make:- C&S Cat Part No-CSMBS1C6N to CSMBS1C32N or Havells Cat Part No DHMGCSNF006-32/Legrand Cat Part No-4086 09 06 to 4086 17 032,

Supply and fixing MCB single pole 6 to 32 Amps, 240 volts all as specified and directed. Make C&S, Havells, Legrand, L&T

M&L GI pipe light grade 40 mm dia for cable protection laid in trench , under road /nalah or under floor wall etc complete all as directed by Engr-in charge.

M&L for cutting / grooving on plinth /wall/verandha in any condition for laying of cable through pipe and making good the distrubed surfaces by using cement concrete 1:2:4 type C-2 using 12.50 mm graded stone aggregate as required complete all as specified and as directed by Engr-in -charge,

Supply & laying XLPE insulated armoured heavy duty electric cable with aluminuin conductor, 1100 V grade, cross sectional area 16 sqmm 2 core.

Excavation in trenches n.exc 1.5m wide and n.exc 1.5m deep and getting out in any type of soil complete all as directed.

M&L for sand cushioning for cable protection 8 cm below the cable and 15 cm above the cable complete all as specified and directed.

M&L for bricks common burnt old size sub class `B' bricks laid dry for cable protection flat width wise complete all as specified and directed.

Removing excavated material n.exc 50m and depositing where directed at a level n.exc 1.5mtr above the starting point.

Returning, filling in, including spreading, leveling, watering and well ramming in layers n.exc 25cm thick in each layers.

Material and labour for Earthing complete with galvanised steel earth plate electrode 600x600x6.00mm thick burried directly in ground any type of soil including rocky soil also(earth pit not less than 2.25 Mtrs below ground level) with top edge of plate not less than 1.5 Mtr below normal ground level connected to GI earth lead wire of 4.0 mm dia by means of bolts, nuts, check nuts, as earth lead complete including 40 mm bore dia protection pipe GI medium grade upto 7.5m length, watering pipe 15mm bore dia GI medium grade 1.70m length, charcoal & salt filling, necessary earth work in any type of soil including rocky soil also, concrete pit, funnel removal of surplus soil upto 50m distance all as per electrical plate No.3 of SSR Part I and connected to earthing test point, main board including testing on completion all as specified and directed.

Material and labour for Earthing complete with galvanised steel earth plate electrode 600x600x6.00mm thick burried directly in ground any type of soil including rocky soil also(earth pit not less than 2.25 Mtrs below ground level) with top edge of plate not less than 1.5 Mtr below normal ground level connected to galvanised iron strip 25×4mm as earthing lead by means of bolts, nuts, check nuts, as earth lead complete including 40 mm bore dia protection pipe GI medium grade upto 7.5m length, watering pipe 15mm bore dia GI medium grade 1.70m length, charcoal & salt filling, necessary earth work in any type of soil including rocky soil also, concrete pit, funnel removal of surplus soil upto 50m distance all as per electrical plate No.3 of SSR Part I and connected to earthing test point, main board including testing on completion all as specified and directed.

S&F in replacement Air termination single pointed aluminium rod 12 mm dia 300 mm long fixed including taking out old air termination rod complete all as specified and directed

Dismantling of old aluminium strip of any size, complete including making good of disturbed portions of wall all as specified and directed by Engr-in-charge.

S&F in replacement aluminium strip 25 x 3.15mm thick fixed with porcelain/PVC saddles and fixing screws etc with minimum two number saddles with screws on and including PVC gutties in each one mtr of length for roof conductors and down conductors above ground, complete all as specified and directed.

S&F in Test point terminal block made of gun metal or phosphorus bronze size 75x75x25mm drilled and screwed including 3 nos. 8 mm dia 25 mm long hex. head screw complete all as specified and directed by Engr in charge

M/s. Rishav Sood

m/S Varun Gupta

Havish Construction

Pathania Builders