Repair and Repainting of AES Yelahanka Office

Amount

Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge in cement mortar

Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, etc. complete. For I sections to hold the wall load above

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering- All work up to plinth level 1:2:4 (1 cement:2 coarse sand(zone-Ill) derived from natural sources: 4graded stone aggregate 20mm nominal size derived from natural sources)

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation7.5in superstructure above plinth level up to floor V level in all shapes and sizes in: Cementmortar1:6(1 cement:6coarsesand)

Providing Cement plaster 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement. 12 mm cement plaster

Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete

Removing white or colour wash and epoxy paint by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete

Finishing walls with Acrylic Smooth exterior paint of required shade Old work (One or more coat applied @ 0.90 ltr/10 sqm).for window chajja and sills (Asian Tractor / Jonson Nicholson /Berger/Nerolac)

Applying one coat of water thinnable cement primer of (Asian Tractor Premium / Jenson Nicholson) on wall surface Water thinnable cement primer

Providing and applying white cement-based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete (Birla and equivalent)

Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound) content less than 50 grams/ litre of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour. , As per manufacturer's specification. (Asian Tractor / Jonson Nicholson/Berger/Nerolac)

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade: One or more coats on old work (Asian Tractor / Jonson Nicholson/Berger/Nerolac ) for roof purlins, windows, doors

Providing and fixing aluminium work for ventilator and windows outer frame with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminiumsections shall be smooth, rust free,straight, mitred and jointed mechanically wherever required includingcleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) Powder coated aluminium (minimum thickness of powder coating 50 micron)

For shutters of windows including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) Powder coated aluminium(minimum thickness of powder coating 50 micron)

Providing and fixing glazing in aluminium window shutters and ventilators etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge. (Cost of aluminium snap beading shall be paid in basic item): With float glass panes of 4.0 mm thickness (weight not less than 10kg/sqm) plain glass (Modi guard / Saint Gobain)

Supplying fixing standard star lock for sliding window shutters as per approved sample

Supplying and fixing with close nit SS mesh as per approved sample for aluminium shutters

Providing and fixing 09 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in paneling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer-in-charge. Pre-laminated particle board with decorative lamination on one side and balancing lamination on other side

M/s. Miraan Enterprises