Karnataka

Financial Eval

Works

Electrical

Shifting of Pole, 11 KV /LT lines and DTC s due to widening of Rampura Malaluru KR Pete Road from KM 0.00 to km 3.00 in Mugthihally Section RSD Chikkamagalur.

Public Works Department

PWD Electrical Division Office Bengaluru | Karnataka

Amount: Refer DocsCloses: 18 Nov 2025Closed

Timeline

Published3 Nov 2025
Closed18 Nov 2025
Financial Evaluation—
Award—

Bids

1 Bid18 Nov 2025

#	Company	Amount	Status
1	INDRESHKUMAR B N ₹29.5 Laccepted-finance	₹29.5 L	accepted-finance

Tender Value

Refer Docs

EMD Value

₹56,500

Closing Date

18 Nov 2025, 9:30 pmClosed

Tender Inviting Authority

Office Inviting Bids

Public Works Department

Contact Person

Laxman AEE

Mobile Number

Work Description

Shifting of Pole, 11 KV /LT lines and DTC s due to widening of Rampura Malaluru KR Pete Road from KM 0.00 to km 3.00 in Mugthihally Section RSD Chikkamagalur.

Tender Information

Tender ID

PWD/2025-26/EL/WORK_INDENT26230

Reference Number

PWD/2025-26/EL/WORK_INDENT26230

Tender Type

Open

Product Category

Electrical

Form of Contract

Two Tender Document System(Two Cover)

Location

PWD Electrical Division Office Bengaluru

Source Website

Subscribe to view

Documents Required

7 documents required · 7 mandatory

Technical Bid

RequiredClass-1 and Above Electrical Inspectorate Registration Certificates

RequiredBalance Sheet & Profit and Loss Statement certified by a Registered Charted Account

RequiredWork done certificate issued by an officer not below the rank of Executive Engineer/ Equivalent.

RequiredBankers Certificate issued by Nationalized Bank in prescribed format. Tender capacity statement.

RequiredOngoing and existing commitments details

RequiredThe Tenderer must have submitted the Certification of registration in the Labour department with the latest renewal.

RequiredQuantity Executed certificate

Eligibility Criteria

Tenders from Joint ventures are not acceptable.

Bidders shall not be under a declaration of ineligibility for corrupt and fraudulent practices issued by Government of Karnataka

The bidder is required to ensure browser compatibility of the computer well in advance to the last date and time for receipt of tenders. The departments shall not be responsible for non-accessibility of e-Procurement portal due to internet connectivity issues and technical glitches at bidders end.

It shall be the responsibility of the Bidder to ensure credit of Tender Processing Fee and EMD into the respective receiving bank accounts of e-Procurement on or before the last date and time of bid submission.

EMD Payments through e-Payment mode shall be made as one single transaction and payments made in part are liable for rejection.

The intending contractors are requested to note that, they should abide by the detailed instructions and conditions contained in the KW-2 tender document and further documents there on.

The cable trench, horizontal duct drilling and laying shall be executed as per ISS No.1255-1967 duly taking all necessary precautions permissions to be got approved by the concerned authorities for digging works. However, necessary letters to be addressed to facilitate for approval with the concerned department.

All necessary drawings, paper works, etc. and any other formalities required to be observed shall be the responsibility of contractor.

Whenever executing authority insist proof of having purchased the materials (used during executing the work) for verification, the contractor shall produce the purchase bills.

The contractor shall guarantee all the materials supplied by him including erection, electrification work for trouble free top class performance and against manufacturing defects for a period of one year from the date of satisfactory completion, commissioning and handing over to user department. The contractor shall make his own arrangement for rectifying defects/replacement of defective materials immediately on receipt of intimation from executing authority and power supply shall be restored. Failure of which, action will be taken to get the work rectification through other agency at the risk and cost of the contractor.

The quantities shown in the schedule are approximate. The actual quantities will be executed as per site condition only. Any balance materials shall be taken back by the contractor.

The contractor shall not deviate/alter/execute excess quantities or additional items without prior approval.

It is the responsibility of the contractor to pursue and obtain all necessary approvals related to work from respective departments.

During the execution of any Minor Civil works or any other minor works which are to be executed, has to be done by the bidder from his end without any charges.

The contractor should see that the existing installation and working of the same are not affected during execution. Only after satisfactorily completion, and charging of new lines, the existing installation, if any shall be dismantled by duly informing to the Department. A site order book of the work shall be maintained and the contractor shall acknowledge the order given by the officers and shall carryout accordingly.

The tenderer shall pass on to the department all the warranties, benefits etc. From the original equipment manufacturers.

Maintaining and supervising all safety precautions and programs in connection with the work and shall comply with all laws, ordinances, codes, rules, regulations and lawful orders of any public authority having jurisdiction for the safety of persons or property or to protect them from damages, injury or loss during the entire contract period, including non-working hours. Contractor shall maintain first aid facilities at site. All critical injuries shall be reported promptly to Engineer with a copy of Contractors report covering each personal injury, requiring the attention of a physician

The Contractor shall submit to the employer, for his review and approval, all shop drawings, samples, materials lists, equipment data, instruction manuals, record documents, manufacturers equipment manuals, and other information required by the Contract Documents, before use and execution and before bringing the material at Site.

The Contractor shall supervise and carry out the Works as per the approved shop drawings or part there of efficiently and with his best skill and attention. He shall be solely responsible for means, methods, techniques, procedures and sequences of construction. The Contractor shall coordinate all parts of the Works and shall be responsible to see that the finished work complies fully with the Contract Documents, and such other instructions and variation orders as the Engineer may issue during the progress of the Works. The Contractor, at no point of time, shall blame the Owner and or the Project Management Consultant, for the wrong doings of the Contractor, in any part of Works

As per Karnataka State Government order No. LD/300/LET/2006 Bangalore Dated 01.01.2007 and G.No. PW/134/BMS/2007 Dated 27.7.2007, a sum amounting to 1% of the bill amount will be deducted welfare fund

Conditional Tenders will not be accepted.

The tenderer shall obtain the work done certificate in the prescribed format from the competent Authority not below the rank of Executive Engineer Or District level Officer and scan the original Certificate and attach the scanned file Certificate/ Certificates shall be produced at the time of opening of technical Bids for physical verification.

The tenderer shall scan the original ownership document/ lease / hire commitment Agreement scanned file to the Bid. The Original Documents shall be produced at the time of opening of Technical Bid.

The Employer reserves the right to reject any or all Tenders without assigning any reason.

Tenderer shall note that the tenders those found Eligible to the conditions mentioned in Section-3 Qualification Instructions to Tenderers.

All materials required for this work, shall be procured by the Tenderer himself and should be got tested by the quality control authorities, at his own cost before use on the work

The entire work shall be carried out under the direct supervision of Officers in charge, Executive Engineer (Elect) and Assistant Executive Engineer (Ele.) .In all cases of differences, disputes, etc., regarding the interpretation of specification of condition in general with any of the work, the decision of E.E.(Elec) PWD Division, Bangalore shall be final and binding on the contractor.

SHOP DRAWINGS: Contractor must submit well in advance shop drawings for approvals by the Engineer-in-Charge and approvals must be obtained before proceeding for execution of the works. DIGITAL FORMAT: All the Documents and drawings shall be as a Hard copy as well as on a Digital format in requisite numbers as per the direction of the Engineer-in-Charge

The project shall be completed well within the contract period, the Tenderer should maintain the works of his scope during the defect liability period, which is 1 Year after the successful completion of the work

The tender must furnish all technical qualification information in the prescribe formats as per KW -2 Standard tender document and should be signed by the Employer in charge, not below the rank of an Executive Engineer or equivalent.

Safety to contractor work men/ General public is the responsibility of bidder / LEC.

Co-Ordinating / solving the right of way problems is responsibility of LEC, in co-ordination with PWD/ local authorities MESCOM.

Tree Cut/ trimming of trees, in Co- Ordination with forest Dept. etc., is the responsibility of bidder / LEC in the way of shifting lines etc.

Co-Ordinating line clear works with MESCOM is the responsibility of bidder in consultation with local MESCOM officers.

Getting electrical inspectorate approval to the shifting of lines/ TC work etc., is responsibility of contractor, however statutory fees paid by contractor will be reimbursed from PWD.

Returning of released materials to local MESCOM stores and to produce ACK of stores officer and joint inventory with MESCOM authorities before final measurements is the responsibility of contractor.

Bidder should plan for all the extra materials if required incidental to the shifting works and stick to the time schedule for shifting of works. Delay of works attract huge penalties as recommended by AEE (E) in charge of works.

All the electrical materials which are bind to be used shall be got inspected from the TAQC MESCOM

The Work should be carried out as per the list of makes uploaded.

Clause 25.5 stipulates for Tenderer to produce detailed rate analysis for various items if tender is seriously unbalanced. (i.e. ., where quoted rates are very high as well as where the quoted rates are less than estimated rated).

The Contractor shall obtain all necessary clearance from electrical inspectorate TA&QC as per BESCOM for erection & commissioning of VC breakers/ Transformers/HT Cables/Metering cubicles etc.

The contractor should arrange for the visit of The Executive Engineer (Elect.) And Assistant Executive Engineer (Ele.), PWD Electrical Division to the manufacturing premises for inspection and conducting tests as per ISI specifications on 11 KV XLPE UG cable and Breakers before dispatch of the materials at his cost, only after approval from the Executive Engineer (Elect.)/ Assistant Executive Engineer (Ele.), the materials shall be dispatched or otherwise the cable and HT Breaker will not be accepted at site. The manufacturer shall have all testing and laboratory facilities in their premises and contractor shall be present at the premises to make arrangements for conducting tests.

All materials required for this work, shall be procured by the Tenderer himself and should be got tested by the quality control authorities, at his own cost before use on the work.

The tenderer shall note that the tenders those found Eligible to the conditions mentioned in Section-3 Qualification Instructions to Tenderers (ITT) will only be considered for further evaluation.

After delivery at site, the materials will be inspected, if the materials do not conform to relevant ISS/ISI and technical specifications of KPTCL/BESCOM/MESCOM, then such materials will be rejected. The contractor shall remove the rejected materials at his own cost.

It is the responsibility of contractor to co-ordinate with executing authority for commissioning the Breaker, HT/LT lines and TCs satisfactory by observing all formalities up to handing over to the user department. After this only, final bill shall be prepared.

It is the responsibility of contractor to observe all necessary formalities of MESCOM for charging the lines and taking over the infrastructure like breaker lines TCs by MESCOM and MT authorities for cables satisfactorily duly acknowledging the inventory of materials used in the work

It is the responsibility of the contractor in obtaining permission from the concerned railway authority for laying HT Cables across Railway crossings.

The Contractor must obtain the necessary approvals as per fire norms from the concerned fire authority.

It shall be the responsibility of the bidder to obtain necessary line clearance from MESCOM and special care has to be taken while working with live conductor. Department is not responsible for any untoward accidents.

The tenderer should declare & furnish the details of tools and machinery having with him to deploy on the work of Supply, installation, testing and commissioning of Transformers including distribution transformer, capacitor bank panel & other allied items to complete within the stipulated time.

The Tenderer Must have submitted the Certification of registration in the Labour department with the latest renewal

As per the Govt. Order No PW2BMS2019 Bangalore Dated 19-06-2019 the applicable GST shall be paid to the SR Items separately.

The tenderer should furnish Name and Address Telephone Nos. Fax Nos. and email ID of the Tenderers Bankers detail

The bidders should submit the Bid capacity compulsorily. The details of balance work B value (works on hand & works for which tender submitted). Should be submitted in the prescribed format & should be signed by the concerned Executive Engineer / District level officer. In case the bidder does not furnish the above details/suppresses the actual facts/ produces false facts, along with the Technical bid, the technical bid of such bidder shall be considered for rejection.

The Tenderer must submit ongoing and existing commitments details separately.

Technical Criteria

Past Experience

3.2To qualify for award of this contract, each tenderer in its name should have in the last Five years i.e. 2020-21 to 2024-25.b) Satisfactorily completed (at least 50% of the contract value), as prime contractor, at least one similar work i.e., Shifting of HT / LT Lines Works of value not less than Rs 14.12 Lakhs in a single work.

Others -- Work done certificate issued by an officer not below the rank of Executive Engineer/ Equivalent

3.2To qualify for award of this contract, each Tenderer in its name should have in the last five years i.e., 2020-21 to 2024-25 c) executed in any one financial year, the following minimum quantities of work: 1. RCC/PCC Poles-66 Nos 2. Guy Set-68Nos 3.Rabbit Conductor-2.8Km (List of quantities to be uploaded by the Tenderer).

Others -- Quantity Executed List issued by an officer not below the rank of Executive Engineer/ Equivalent

Capabilities of Vendor

The tenderer as a Prime Contractor having valid Class-1 & above Electrical License issued by Electrical Inspectorate Govt. of Karnataka and should have suitable technical, financial & managerial capabilities.

Others -- Class 1 Registered Electrical inspectorate License

3.6Tenderers who meet the above specified minimum qualifying criteria, will only be qualified, if their available tender capacity is more than the total tender value. The available tender capacity will be calculated as under/ Assessed available tender capacity - (AxNx2.5-B) Where, A-Maximum value of construction works executed in any one year during the last five years (updated 2025-26 price level) taking into account the completed as well as works in progress. N Number of years prescribed for completion of the works for which tenders are invited. 0.50 Years (06 Months) B - Value, at 2025-26 price level, of existing commitments and on-going works to be completed during the next. 0.50 Years (06 Months) (period of completion of the works for which Tenders are invited) Note: The statements showing the value of existing commitments and on-going works as well as the stipulated period of completion remaining for each of the works listed should be countersigned by the Employer in charge, not below the rank of an Executive Engineer or equivalent.

Others -- Bid Capacity

The Tenderer must submit ongoing and existing commitments details separately.

Others -- Ongoing and existing commitments Works List.

The Tenderer must have submitted the Certification of registration in the Labour department with the latest renewal.

Others -- Labour Department Certificate

Financial Status

3.2To qualify for award of this contract, each Tenderer in its name should have during last five years i.e., from 2020-21 to 2024-25.a) The tenders must have achieved in at least two financial years an average annual financial turnover of an amount Not less than Rs.28.25 Lakhs during last five years. With UDIN Number certified by Chartered Accountant, If Failed to Satisfy the condition tender will be rejected Note: The returns submitted to the I.T. along with the Profit and Loss account statement, Balance sheet should be uploaded for the financial turnover criteria.

Others -- Audited CA Certificate of Annual Turnover with Balance Sheet

3.3Each Tenderer should further demonstrate: (b) liquid assets and /or availability of credit facilities of not less than Rs.8.47 Lakhs (For Particular work only) (Credit lines/ letter of credit/ certificates from banks for meeting the fund requirement etc. (usually the equivalent of the estimated cash flow for three months in the peak construction period)

Others -- Line of Credit Certificate

The Bidders shall deposit E.M.D of Rs. 56,500/- through any e-payment mode.

Others -- EMD

Others

Nil

Others -- Nil

Nil

Others -- Nil

Nil

Others -- Nil

Fee & Financial Details

Tender Fee Amount

₹710

EMD Fee Amount

₹56,500

Important Dates

Last Activity

18 Nov 2025

Published

3 Nov 2025

Bid Opening

19 Nov 2025

Download Ends

7 Nov 2025

BOQ Preview

•

Shifting of Pole, 11 KV /LT lines and DTC s due to widening of Rampura Malaluru KR Pete Road from KM 0.00 to km 3.00 in Mugthihally Section RSD Chikkamagalur.

•

Supply & Erection of Pre-Stressed Tubular Spun Pole - 11 Mtr Long, 500 Kg WL (Dwg No. BESCOM/GM/QS&S/45 Dtd 24.11.2018) as per IS-13158: 1991 including Digging of Pit 2.5 Mtr depth for erection of 11 ...

•

Supply & Erection of PSCC Pole - 9 Mtr Long, 200 Kg WL (Dwg No.BESCOM/GM/QS&S/50 Dtd 24.11.2018) as per REC Standards including Digging of Pit 1.8 Mtr depth for errection of 9 to 10 Mtr Long Steel/RCC...

•

Supply & Erection of RCC Pole - 9 Mtr Long, 145 Kg WL (Dwg No. BESCOM/GM/QS&S/02 Dtd 24.11.2018) as per IS 785including Digging of Pit 1.8 Mtr depth for errection of 9 to 10 Mtr Long Steel/RCC/PSCC su...

•

Double Pole Structure complete including 5 Kg, 8 SWG GI Wire for Structure Grounding 9M RCC Pole ---- Items of work are including cost and convey ance of all materials, labour charges for all items of...

•

Supply & Providing Spiral Earth Electrode type earthing (without charcoal, salt etc.,) ---- Items of work are including cost and convey ance of all materials, labour charges for all items of work with...

•

GI Grounding pipe, B - Class, 42 mm dia, 2.5 M long, 3.2 mm thick with bolts nuts, GI Strips and wash ers complete Minimum Weight of GI Pipe: 7.3 Kgs ---- Items of work are including cost and convey a...

•

11 kV, Horizontal Cross Arm with clamps, bolts, nuts & washers for DC Line - MS For RCC Pole ---- Items of work are including cost and convey ance of all materials, labour charges for all items of wor...

•

11 kV, Horizontal Cross Arm with HT Single Top supports, clamps, bolts, nuts & washers - MS For RCC Pole ---- Items of work are including cost and convey ance of all materials, labour charges for all ...

•

Supply & Providing of 11 kV, 5 kN Composite/Polymeric Pin Insulator (24 mm dia FRP Rod ---- Items of work are including cost and convey ance of all materials, labour charges for all items of work with...

•

Supply of 11 kV, 45 kN Polymeric Insulator ---- Items of work are including cost and convey ance of all materials, labour charges for all items of work with all lead and lift, loading and unloading an...

•

Supply & stringing of Rabbit ACSR

•

(6/3.35 mm Al + 1/3.35 mm St), Std Wt: 214 Kg/KM and Stringing of Conductor for Rabbit ACSR ---- Items of work are including cost and convey ance of all materials, la...

•

Supply & Providing Guy set with No. 15 Strain Insulator & Concreting materials as per Dwg No. BESCOM/GM/CP/7 Dt: 24.10.07 ---- Items of work are including cost and convey ance of all materials, labour...

•

Releasing and Refixing of RCC Pole - 9 Mtr Long, 145 Kg WL ---- Items of work are including cost and convey ance of all materials, labour charges for all items of work with all lead and lift, loading ...

•

Releasing and Restringing of ACSR Rabbit conductor ---- Items of work are including cost and convey ance of all materials, labour charges for all items of work with all lead and lift, loading and unlo...

•

Releasing and Refixing of PSCC Pole - 9 Mtr Long, 200 Kg WL ---- Items of work are including cost and convey ance of all materials, labour charges for all items of work with all lead and lift, loading...

•

Releasing and Refixing of V-Shape/Horizontal cross arm for DC Line including Brace and Insulator fixing. (Without Single Top Support) ---- Items of work are including cost and convey ance of all mater...

•

Concreting materials for 11 Mtrs Spun Pole Base concreting 1:2:4, 1000x1000x150 mm ---- Items of work are including cost and convey ance of all materials, labour charges for all items of work with all...

•

Concreting materials for 11 Mtrs Spun Pole Pole concreting 1:2:4, 1000x1000x2500 mm

•

---- Items of work are including cost and convey ance of all materials, labour charges for all items of work with ...

•

Releasing of RCC Pole - 9 Mtr Long, 145 Kg WL ---- Items of work are including cost and convey ance of all materials, labour charges for all items of work with all lead and lift, loading and unloading...

•

Releasing of PSCC Pole - 8 Mtr Long, 200 Kg W ---- Items of work are including cost and convey ance of all materials, labour charges for all items of work with all lead and lift, loading and unloading...

•

Releasing of V-Shape/Horizontal cross arm for DC Line including Brace and Insulator fixing. (Without Single Top Support) (BR.144.00+ASL 3%) ---- Items of work are including cost and convey ance of all...

•

LT 4 Pin Cross Arm with clamps, bolts, nuts & washers with brace - MS For PSCC Pole 140 KG WL ---- Items of work are including cost and convey ance of all materials, labour charges for all items of wo...

•

Supply of 1.1 kV Ceramic Pin Insulator (Shell only) (Material) ---- Items of work are including cost and convey ance of all materials, labour charges for all items of work with all lead and lift, load...

•

Supply of 1.1 kV GI Pin for 1.1 kV Ceramic Shell Insulator(volume -6 item no. 6.04 page no 5 of 81) (Material) ---- Items of work are including cost and convey ance of all materials, labour charges fo...

•

Supplying and providing No.8 strain insulator (Item no 6.07 page no 5 of 81) (Material) ---- Items of work are including cost and convey ance of all materials, labour charges for all items of work wit...

•

Releasing and Refixing of 4 Pin cross arm with Insulator and Braces fixing ---- Items of work are including cost and convey ance of all materials, labour charges for all items of work with all lead an...

•

Double Pole Transformer Structure complete with cross arms, braces, clamps, bolts & nuts and

•

washers including 2 No of Poles For 25/63/100 kVA 4/5 Star Rated Transformer on RCC Pole - 9 M Long, 145 Kg...

•

GI Grounding pipe, B - Class, 42 mm dia, 2.5 M long, 3.2 mm thick with bolts nuts, GI Strips and wash ers complete Minimum Weight of GI Pipe: 7.3 Kgs (Material ) ---- Items of work are including cost ...

•

7/10 SWG Guy Wire (7/3.251 mm Dia), Std Wt: 680 Kg/KM (Volume-6 Item no.8.01 page no 05 of 81 ) ---- Items of work are including cost and convey ance of all materials, labour charges for all items of ...

•

8 SWG GI Wire (4.064 mm Dia), Std Wt: 131 Kg/KM (Volume-6 Item no.8.02 page no 05 of 81 ) ---- Items of work are including cost and convey ance of all materials, labour charges for all items of work w...

•

Alkathene Tube 19 mm Dia and in coils of 30 Mtr ---- Items of work are including cost and convey ance of all materials, labour charges for all items of work with all lead and lift, loading and unloadi...

•

Anti Climbing Device (12 Mtr GI Barbed Wire) ---- Items of work are including cost and convey ance of all materials, labour charges for all items of work with all lead and lift, loading and unloading ...

•

Caution/Danger Board ---- Items of work are including cost and convey ance of all materials, labour charges for all items of work with all lead and lift, loading and unloading and HOM of machineries e...

•

Releasing and Refixing of 25 to 63 kVA Transformer on Transformer Structure ---- Items of work are including cost and convey ance of all materials, labour charges for all items of work with all lead a...

•

Releasing of Double Pole Transformer Structure complete with cross arms, braces, clamps, bolts & nuts and washers including 2 No of Poles For 25/63/100 kVA 4/5 Star Rated Transformer on PSCC Pole - 9 ...

•

11 kV Lightning Arrester, Metal oxide, 10 kV, 5 kA Polymeric Type with ground disconnector ---- Items of work are including cost and convey ance of all materials, labour charges for all items of work ...

•

Providing & Fixing the 11 kV, 200 Amps, Single Break GOS (C,D.S-24 Pg No 371/635 Sl.no 16 ) (Material ) ---- Items of work are including cost and convey ance of all materials, labour charges for all i...

•

GOS as per IS-9921, IS-1977 H - Frame Set for fixing 11 kV, 200 Amps Single Break

•

GOS - (For DP structure for providing New GOS for sectionalisation) - MS and Erection of H-Frame

•

---- Items of work a...

•

b) LT Wiring (From DTC to LT Line Through

•

Metering Box & LT Protection Kit) SINGLE

•

i) Al Lead Wire - 50 Sqmm

•

ii) Heavy Duty Long Barrel Copper Lug - 50

•

iii) PG Clamp - Rabbit to 50 Sqmm...

•

Providing the LT Protection Kit (Dwg No. BESCOM/GM/QS&S/10 Dtd 24.11.2018) Fixing of LT Protection Kit (Material+ Labour ) ---- Items of work are including cost and convey ance of all materials, labou...

•

HG Fuse Unit as per IS-5350 Part-2 11 kV, HG Fuse Unit with Solid Core Insulator (Dwg No. BESCOM/GM/QS&S/21 Dtd 24.11.2018) and Fixing DOLO Cutout/Horn Gap Fuse including fixing of cross ---- Items of...

•

Releasing and Refixing of GOS including wiring (11 kV Double Break 400 Amps) ---- Items of work are including cost and convey ance of all materials, labour charges for all items of work with all lead ...

•

Releasing and Refixing of H-Frame for mounting GOS ---- Items of work are including cost and convey ance of all materials, labour charges for all items of work with all lead and lift, loading and unlo...

•

Releasing of 11 kV, 200 Amps, Single Break GOS ---- Items of work are including cost and convey ance of all materials, labour charges for all items of work with all lead and lift, loading and unloadin...

•

Releasing of H-Frame for mounting GOS ---- Items of work are including cost and convey ance of all materials, labour charges for all items of work with all lead and lift, loading and unloading and HOM...

•

Releasing and Refixing of V-Shape/Horizontal cross arm including Single Top Support Brace and Insulator fixing ---- Items of work are including cost and convey ance of all materials, labour charges fo...

•

Releasing and Refixing of Double Pole Structure complete including 5 Kg, 8 SWG GI Wire for Structure Grounding 9M RCC Pole

•

---- Items of work are including cost and convey ance of all materials, labo...

•

Releasing and Refixing Insulator of 11 kV Pin Insulator

•

---- Items of work are including cost and convey ance of all materials, labour charges for all items of work with all lead and lift, loading an...

•

Releasing and Refixing Insulator of 11 kV Dead End Insulator Disc, Strain etc

•

---- Items of work are including cost and convey ance of all materials, labour charges for all items of work with all le...

•

11 kV, Horizontal Cross Arm with HT Single Top supports, clamps, bolts, nuts & washers - For PSCC Pole 140 KG WL

•

---- Items of work are including cost and convey ance of all materials, labour charges...

•

Releasing and Refixing of Caution/Danger Board

•

---- Items of work are including cost and convey ance of all materials, labour charges for all items of work with all lead and lift, loading and unload...

•

Releasing and Refixing of 11 kV, 200 Amps, Single Break GOS

•

---- Items of work are including cost and convey ance of all materials, labour charges for all items of work with all lead and lift, loadin...

•

Releasing and Refixing of 3 Nos Lightning Arrestor including wiring

•

---- Items of work are including cost and convey ance of all materials, labour charges for all items of work with all lead and lift...

•

Releasing & Refixing of LT Electronic Tri-Vector Meter 5 Amps,0.5/1.0 Accuracy Class

•

---- Items of work are including cost and convey ance of all materials, labour charges for all items of work with ...

•

11 kV GI Pin for 11 kV Ceramic Shell Insulator

•

---- Items of work are including cost and convey ance of all materials, labour charges for all items of work with all lead and lift, loading and unloadi...

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

NIT Documents

KPPP kw-2 bid 26230.doc

Tender Document • 1.07 MB

Ready to Participate?

Download all tender documents and submit your bid

Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .

Loading…

Company

INDRESHKUMAR B N

₹29.5 Laccepted-finance