PROVN OF DRAINAGE SYSTEM AT OR MD ACCN OF COD AND OTHER SANCTION WORK UNDER GE NORTH DELHI CANTT10

Demolition of Brickwork or stone/ boulders masonry built in cement or cement lime mortar incl all quions, arches, pillars, etc but excluding ashlar facing, dressed stone work and precast concrete articles.

Excavation in trenches , n exc 1.5 m wide and n exc 1.5 in depth for foundation etc or for shafts, wells cesspits manholes, pier holes, etc n exc 10 sqm on plan and nexc 1.5m on plan and n exc 1.5m depth and getting out in mud, soil, or ny other items

Demolition of cement concrete (unreinforced) in ground floors and paving not exceeding 15 cm thickness (below or above ground level) complete.

Demolition of reinforced cement concrete in ground floors and pavings n exc 15 cm thickness (below or above grouond level) complete.

M&L for Plain Cement Concrete type C-2 1:3:6 (using 40mm graded stone aggregate) as in foundation filling and mass concrete.

M&L Brickwork with subclass 'B' Brick straight or curved on plan exc 6m mean radius, built in, built in cement mortar 1:6 complete all as specified.

All as per the description of srl item No 06 but except brick (brick used obtained from demolition) complete.

M&L for providing plain cement concrete type B1, 1:2:4 (using 20mm graded stone aggregate) in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60cm I height, copings, kneelers, apex stones, bed plates, kerbs not provided for in water roughs and the like including weathering, slightly rounded or chamfered angles and throating as directed.

M&L for cement concrete type B-2 1:2:4 (using 20mm graded stone aggregate as in surface channels and drains.

Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends etc.

Reinforced cement concrete 1:2 :4 type B-1 using 20 mm graded stone aggregate in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete (reinforcement to be measured separately).

M&L for provinding precast cement concrete, Type B-1, 1:2:4 (using 20mm graded stone aggregate) set in CM 1:4 as in landings, cover slabs (for man holes etc.) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces including necessary formwork. Note:- TMT bars to be measured and paid separately.

Mild steel TMT bars 10 mm dia as reinforcement for concrete, cut to length, bent to shape required, including cranking, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia complete.

M&L for Reinforced concrete pipes, 300 mm dia class NP2, laid and jointed complete with collars complete all as specified and directed

M&L for Plain Cement Concrete bed 1:3:6, type C-2 to drain pipes of dia 300 mm including packing under, and haunching against the sides of pipes after they are laid and tested; in

Formwork to sides and soffits of slabs n. exc. 200 mm thick and similar works rough finished surfaces of concrete complete.

M&L 15 mm thick rendering on brick work or concrete surface in cement mortar 1:4 surface finished even and smooth without using extra cement complete all as specified and as directed.

Returning,filling in, including spreading ,levelling ,watering and well ramming in layers n exc 25 cm thick soil

Removing excavated material exc 250 m but n exc 500 m and depositing where directed

Mild steel conforming to Fe 410-0 or Fe 310-0 in framed work such as grills, gratings, etc with ends of bars shouldered and/or riveted or forged into spikes; framed guard bars; ladders; railings and similar work complete.

M&L applying two coats of synthetic enamel paint on new steel surfaces of any description over 10cm width or girth over a coat of red oxide primer including preparation of steel surfaces complete.

Excavation in post holes (or similar holes ) each n. exc 0.5 Cum in soft/loose soil, getting out,removing soil to a distance n. exc 50M , complete all as specified and directed.

Mild steel angle iron posts and struts confirming to FE-290 E-165 as in fencing including cutting tops for required shape, drilling holes, notching for wire including all necessary drilling of similar work, complete all as specified and directed.

Supply only Chain link fencing including wires, mesh of size 50x50mm, weight not less than 4.0 Kg/Sqm confirming to IS, type standards rails, straining bolts etc including provision of binding wire, complete all as specified and directed.

Fixing only chain link fencing including line wire, any mesh, size and type to any type of standards, rails, straining bolts etc. including provision of binding wire, complete all as specified and directed.

S&F MS screw bolts (machine made) with hexagonal or square heads at one ends and screwed the other, or screwed both ends, each screwed end to be fitting with washer and one hexagonal or square nut n.exc. 5cm long and dia of shank 8 to 10 mm etc.

Preparing new plastered surfaces of walls and applying two coats of cement base paint complete all as specified

S&F frame work of WPC size of frame 75mmX50 mm all as per direction of Engr-in-charge.

S&F WPC Jaali 18mm thick any design and colour as directed by Engineer -in -charge complete.

Surface excavation n. exc. 30 cm deep and averaging 15cm deep and getting out in hard/dense soil.

M&L for hardcore of gauge n exc. 63 mm,of broken stone deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and directed.

M&L for 100 mm thick cement concrete type D-2 1:4:8 (40 mm graded aggregate) as in sub base complete all as directed and specified

M&L fo vibro compacted precast concrete interlocking paver block any shape and size confirming to IS-15658 - 2006 of 60mm thickness M-35 grade with gray cement and no pigment over 40 mm thck sand cushioning complete all as specified and directed.

S&F for factory made kerb stone of M-25 grade precast cement concrete stone laid in position to the required line, level and curvature jonted with cement mortor 1:3 incl making the joint with or without grooves incl making drainage opening where ever required complete as per direction of Engr-in-Charge.

M&L for painting of two coats synthetic enamel paint over kerb stone in white/yellow/black/ shade incl priming coat and cleaning/preparation of the new surface laid as per desigh approved by Engr-in-charge

M&L for cement concrete type B-0, 1:2:4 using 12.50mm graded aggregate in roof, kerbs or mud stops, rounded or chamfered on edges complete all as specified and directed.

M&L for PCC 1:4:8 type D2, using 40mm graded stone aggregate, as in foundation filing,sub base of floor complete all as specified and directed

S&F steel work in tubular trussles,purlins,rafters,tubler column, where connected common rafter and running rails fixed with angle cleat or other connection plates including special shaped washers etc. complete using ERW or induction butt welded tubes confirming to Fe 410W grade E 250 quality B, etc complete all as specified and directed.

M&L for applying two coats of synthetic enamel paint on new or previously untreated steel surfaces exc 10cm width or girth over a coat of red oxide zinc chrome primer including preparation of surfaces complete all as specified and directed.

S&F 0.50mm thick (including coated thickness) Pre-colour, pre-profiled ( Galvalume ) sheets of required colour and design having tensile strength of 550 Mpa as in roof, wall cladding, north light curves, fixed with zinc coated self drilling fastener including EPDM washer complete laid with one corrugation side laps and min 150mm end lap laid to slope all as per manufacturer/ profile maker instruction complete all as specified and directed.

M&L for 60mm thick M-35 grade factory made rubber moulded coloured machine pressed precast conctete interlocking paver block in approved design and colour, confirming to IS 15658-2006 with gery cement and pigment as approved laid over and including 40mm thick sand cushion/Sand filling under floors complete all as specified and as directed.

M&L for Mild steel bars (TMT bars) 5mm dia and over upto and including 10mm dia in strriups,spacers and binders complete all as specified and directed.

M&L for formwork to fair finished surface for sides of concrete foundations, footings, bases of columns, raft and beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter finished fair complete all as specified and directed

M&L Reinforced cement concrete M-25 using 20 mm graded stone aggregate as in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and directed

M&L for formwork to sides of pillars, posts, struts, piers, columns and stanchions finished fair complete all as specified and directed

M&L Reinforced Cement Concrete M-25 using 20 mm graded stone aggregate as in Columns, pillars, piers, posts and struts complete all as specified and directed.

M&L for formwork fair and finished surfaces to sides and soffits of floor or roof beam, beam hauchings, bands, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc complete all as specified and directed

M&L Reinforced Cement Concrete M-25 using 20 mm graded stone aggr as in beams, bands, cantilvers, bressummers, linters, chajjas, etc over 1.5m span etc complete all as specified and directed

M&L for formwork to fair finished surface for staircase with sloping or stepped soffits includings risers and stringers, soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work, not exceeding 200mm thick (horizontal or sloping), etc complete all as specified and directed.

M&L Reinforced Cement Concrete M-25 using 20 mm graded stone aggregate as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like, etc complete all as specified and directed

M&L for moorum / red bajri filling in floors or pavings, laid in layers nexc 15cm thick, spread, levelled and rammed including waterring and consolidation complete all as specified and directed.

M&L plain cement concrete 1:4:8, type D2( using 40mm graded stone aggregate) 75mm thick as in sub base of floor complete all as specified and directed .

M&L plain cement concrete 1:3:6, type B1( using 20mm graded stone aggregate) 75mm thick as in plinth protection complete all as specified and directed .

M&L for rendering 15mm thick in CM 1:4 on other than fair faces of brick or concrete surface with liquid water proofing compound @ 200 ml per bag finished even and smooth without using extra cement complete all as specified and directed. Note:- Liquid water proofing compound to be measured paid separately

M&L for rendering 5mm thick in ceiling CM 1:3 on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed.

Supply only integral water proofing compound complete all as specified and directed.

M&L for apply two coats of Anti fungal weather coat acrylic emulsion paint over a coat of primer on new surfaces including 2 -3 mm thick wall putty, complete all as specified and directed. Make of Arcylic emulsion weather coat paint :- Asian (Apex Ultima) ,Berger (Super coat ) or ICI Dulux (weather shield) . Note:- (a) Each stage i.e. preparation of surfaces, application of primer, application of first coat, application of second coat will be got passed from Engr-in -Charge.(b)Written Warranty for four years or as per manufacturer's instructions, whichever is more is required to be furnished by contractor for this item.

M&L for preparing new plastered surface on ceiling and applying three coat of white wash complete all as specified and directed.

S&F of floor pedastal fan, steel body, AC, single phase, 230 V of size 600mm sweep with blades, frame heavy duty industrial type, copper wound motor having 900 RPM speed, and including making of holes of suitable sizecomplete all as specified and directed by Engr in Charge.

M&L for point wiring with 1.5 Sq.mm nominal cross sectional area, single core, 1100 Volts grade, multi-stranded, PVC insulated, unsheathed FRLS copper conductor cable with and including continuous earth wire of size 1.5 Sqmm connected to common earth and earth dolly with suitable copper lugs and drawing into and including rigid non-metallic PVC conduit of 20 mm dia or higher, medium grade complete with and including all PVC conduit accessories concealed into wall by cutting of chases in wall and replacement of sunken zinc coated pressed steel terminal box of 1.60mm thick with 3mm thick plastic laminated sheet top cover, brass/stainless steel screws, cup washers etc and making good to the disturbed surface complete all as specified and directed for One socket point independant type.

S&F switch piano flush type, 06 Amps, single pole, one way, 230 volts complete

S&F socket outlet 2 in 1, 5 pin, 06 Amps, flush type, 230 volts with socket frame complete

Supply and fix electric water heater storage of 50 ltrs capacity BEE 5 star rated, vertical type with suitable size of fastner and inclusive provision and connecting up to SS braidid pipe with adapter for inlet and outlet water connection, copper element corrosion resistance antiscaling magnesium anode having adjustable knobe for temperature control and inner tank material of superior glass limid tank and outer body material ABS with high pressure with standing capacity upto 8 bar pressure having heating element 2KW with minimum two year warranty on product, minimum 3 years warranty on element and mininmum 5 year warranty on tank complete all as specified and as directed Make-AO_smith/Havells/Racold.

M&L for two single core (submain) PVC insulated cable with 4.0 sqmm nominal cross sectional area stranded copper conductor and one single core green PVC insulated 4.0 sqmm stranded copper conductor earth continuity cable drawn through non metallic rigid PVC conduit 25 mm dia concealed in wall including all conduit and fixing accessories including cutting chases & making disturbed surfaces complete (For geysers)

S&F sheet metal enclosure flush type, Single pole and neutral enclosure with a two pin and earth plug and socket with one single pole MCB with 20 Amps complete

S&F MCB SP 6 to 40 amps, 240 Volts, 10 KA breaking capacity 'C' curve incl connection complete (To be fitted in existing DB)

Supply and fixing wall mounted fan of 400 mm sweep, 230 volts, AC, 50 Hz capacity, including all arrangements for mounting of fan including connecting up with provision of PVC insulated flexible twisted type copper conductor cable 1.5 Sqmm, 2 core as required for connections complete all as pecified and as directed.