SMART PERIODICALS FOR ADMINISRATIVE BLDG IN SITE A SUCH AS HQ KNA INS KADAMBA NSRY, NOM AND SITE E SUCH AS NAD AND VAJRAKOSH UNDER GE(SB) KARWAR.

Amount

Material and labour for complete removal of existing treatment by scrapping with mechanical wall sander (having mechanical vacuum mechanism) having RPM not less than 1500, sanding pad of 80 Grit having dia of 7"/9" to make the surface free from dust, loose paint etc. by skilled labour complete all as directed.

Material and labour for single component polymer modified repair mortar with compressive strength minimum 38 MPA at 28 days (ASTM C 109:99) and tensile strength minimum 2.5 Mpa (ASTM C 307) up to 15mm in a single coat @ 34 kg per sqm for 15mm thickness as per manufacturer instructions complete all as directed.

Material and labour for waterproof cement based putty @ 1 Kg(undiluted) per sq mtr. of average thickness 1 mm over the plastered/old painted wall after scrapping to prepare the surface even and smooth complete and sanding of the putty surface with mechanical wall sander (having mechanical vacuum mechanism) having RPM not less than 1500, sanding pad of 240 Grit or above to make the surface free from dust etc. by skilled labour as per following steps:- Step 1) Mix the putty powder by adding water as per manufacturer instructions and mix it with putty mixer with the mixing capacity of min 2.5 kg putty per minute. Step 2) Apply the first coat the prepared mixer with the help of fully automatic airless spray machine of putty application having flow speed of max 6 Ltrs per minutes with a maximum pressure 3300 PSI Step 3) Allow 6-8 hrs time to dry the putty surface.

Material and labour for one coat of acrylic water based interior grade primer @ 0.8 ltr(undiluted)/10 sq Mtrs diluted with water in 1:1 ratio to be applied with fully automatic airless spray machine of paint application with a flow speed of min 1 ltr per minute having a pressure of 3300 PSI.Allow 6-8 hrs to dry the surface for painting of subsequent coats.

Material and labour for applying two coats of oil bound distemper using Airless spray technology with max working pressure of 3300 PSI and capable of operating single spray gun with a max material hose length of 30 mtr the spray machine should be of reputed manufacturer with pro guard technology and capability of tracking pressure and paint usage and certified by paint manufacturer and as mentioned in PS and accessories for applying distemper should be able to spray in hard to reach areas and penetration of distemper on the surface complete all as specified and directed. Note : - Sanding of surface to be done by mechanical sander with 1500 - 2700 rpm, with internal dust extraction system for clean environment certified by paint manufacturer.

Material and labour for preparation of old surface (Plastered or unplastered) of walls and applying One coat of oil bound distemper including filling the holes, depression area with wall acre putty using Airless spray technology with max working pressure of 3300 PSI and capable of operating single spray gun with a max material hose length of 30 mtr the spray machine should be of reputed manufacturer with pro guard technology and capability of tracking pressure and paint usage and certified by paint manufacturer and as mentioned in PS and accessories for applying material should be able to spray in hard to reach areas and penetration of distemper on the surface including scaffolding arrangement, trestles, ladders etc and cleaning of splashes from furniture and floors , doors/ windows up to two or three stories building complete all as specified and directed.

Material and labour for two coats of smooth interior acrylic emulsion with rich matt finish having VOC less than 50 grams per ltr complying LEEDS criteria @1 Ltrs(undiluted) /10 sq Mtrs diluted with water in 2:1 ratio applied over priming coat with fully automatic airless spray machine of paint application with a flow speed of min 1 ltr per minute having a pressure of 3300 PSI.Allow 6-8 hrs to dry the surface in both the coats of paint as per manufacturer instructions complete all as directed.

Material and labour for two coats of smooth interior acrylic emulsion with Texture finish having VOC less than 50 grams per ltr complying LEEDS criteria @1 Ltrs(undiluted) /10 sq Mtrs diluted with water in 2:1 ratio applied over priming coat with fully automatic airless spray machine of paint application with a flow speed of min 1 ltr per minute having a pressure of 3300 PSI.Allow 6-8 hrs to dry the surface in both the coats of paint as per manufacturer instructions complete all as directed.

Material and labour for preparation of new plastered surfaces of walls /ceiling and chajja and applying two coats of oil bound distemper using Airless spray technology with max working pressure of 3300 PSI and capable of operating single spray gun with a max material hose length of 30 mtr the spray machine should be of reputed manufacturer with pro guard technology and capability of tracking pressure and paint usage and certified by paint manufacturer and as mentioned in PS and accessories for applying distemper should be able to spray in hard to reach areas and penetration of distemper on the surface complete all as specified and directed. Note : - Sanding of surface to be done by mechanical sander with 1500 - 2700 rpm, with internal dust extraction system for clean environment certified by paint manufacturer.

Material and labour for one coat of acrylic water based exterior grade primer @0.9 ltr(undiluted)/10 sq Mtrs diluted with water in 1:1 ratio to be applied with fully automatic airless spray machine of paint application with a flow speed of min 1 ltr per minute having a pressure of 3300 PSI Allow 6-8 hrs to dry the surface for painting of subsequent coats complete all as specified and directed.

Material and labour for preparation of old surface (Plastered or unplastered) of walls and apply water proof cement based putty in holes and depression area over the plastered/old painted wall and applying One coat water based premium acrylic smooth exterior emulsion of approved colour with silicon additive & Color stay Technology ,Excellent Dirt Pick up resistance with low VOC less than 50 gram/ litre as per the LEEDS specifications, Anti Algal properties in two coats @ 1.79 ltr (undiluted)/ 10 sqm diluted with water as per manufacturer instructions applied over acrylic water based grade primer @ 0.8 ltr(undiluted)/10 sq Mtrs diluted with water in 1:1 ratio with fully automatic airless spray machine of paint application with a flow speed of min 1 ltr per minute having a pressure of 3300 PSI. Allow 6-8 hrs to dry the surface in both the coats of paint complete all as directed. Make should be Apex shine of Asian Paint/Anti Dust of Burger/Mica Marble of Nerolac and paint to be prepared by mechine only and can be of different shades as approved including (Bldg G+7)

Material and labour for two coat water based premium acrylic smooth exterior emulsion of approved colour with silicon additive & Color stay Technology ,Excellent Dirt Pick up resistance with low VOC less than 50 gram/ litre as per the LEEDS specifications, Anti Algal properties in two coats @ 1.79 ltr (undiluted)/ 10 sqm diluted with water as per manufacturer instructions applied over priming coat with fully automatic airless spray machine of paint application with a flow speed of min 1 ltr per minute having a pressure of 3300 PSI.Allow 6-8 hrs to dry the surface in both the coats of paint complete all as directed. Note for Item No 1 to 10 above (a.) The work pertaining to periodical services & Water Proofing shall be executed from authorized applicator through manufacturer of which the materials .i.e. Paint, Distemper, Cement base paint, Putty etc. is proposed to be used by the contractor and approved by Garrison Engineer.

Material and labour for preparation of old painted wooden base surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint using Airless spray technology with max working pressure of 3300 PSI and capable of operating single spray gun with a max material hose length of 30 mtr the spray machine should be of reputed manufacturer complete all as specified and directed by Engr-In-Change

Material and labour for obliterating old writing of any description, not exc 0.1 sqm with paint to match existing works complete all as specified and directed.

Material and labour for rewriting/repainting to existing writing letters or figures not exc 30 cm height in block Roman, Italian or Indian letters including stops, comma, arrows, brackets, dashes etc on sign board (Black or yellow base) including two coats of oil paint over a coat white base synthetic enamel paint complete all as specified and directed.

Material and labour for Removing /cutting trees vegetation, digging out roots from concrete or brick wall filling holes on building (block of 4/6 qtrs) wall/roof/chajja/water tank staging area etc and making good with cement mortar 1:4 complete all as specified and directed.

Notes for all items: (a) The work pertaining to smart periodical services shall be executed from authorized applicator through manufacturer of which the materials i.e. Paint, Distemper, Primer, Cement base paint, Putty etc. is proposed to be used by the contractor and approved by Garrison Engineer. (b) The contractor shall procure a minimum of 50% of all items (other than paints) mentioned in this CA within 20 days of obtaining sample approval, and keep them in safe custody to avoid any delay in execution due to non-availability of materials. The contractor shall further ensure that, during the course of work, a minimum of 25% of materials remains available with him until completion of the contract. (c) The rate quoted for demolition/ dismantling/ taking down shall be deemed inclusive of removal of debris from the site and disposal at dumping locations situated anywhere outside Naval Base Karwar as directed.

(d) In all painting works, the contractor shall ensure proper covering of floors, furniture, and nearby items prior to commencement of work, and shall thoroughly clean the area after completion. Any existing paint drops or stains shall be brought to the notice of the Engineer-in-Charge before starting the work. (e) The contractor shall understand that this contract is intended for execution of works during the break period, and shall accordingly deploy adequate manpower to ensure that the entire work is completed within the stipulated period. (f) The contractor shall bring the full quantity of paints as per CA in one consignment, and each container shall be numbered using a permanent marker. The empty paint buckets shall be retained safely and produced before the Garrison Engineer at the time of bill preparation and for accounting purposes. (g) Contractor shall use proper covering on the floors and furniture items etc., before painting to avoid paint splashes/ marks from the floors and furnitures. Otherwise a recovery of Rs.10.00 per sqm in internal painting and Rs. 5.00 per sqm for the external paintings shall be made from the contractor.

M/S KAMALKANTH NAIK (BID ID -3516348)