Construction of various Miscellaneous works at Harmu Chadri Masna Asthal, Harmu, Ranchi

Amount

Earthwork in excavation in foundation trenches in ordinary soil (vide classification of soil item-A) and disposal of excavated earth as obtained to a distance upto 50 M. including all lifts, levelling, ramming the foudation trenches, removing roots of trees, shrubs all complete as per approved design, building specification and direction of E/l.

Extra for earthwork in hard soil as per specification and direction of E/l (vide classification of soil item-B)

Providing coarse clean sand in filling in foundation trenches or in plinth including ramming and watering in layers not exceeding 150mm thick with all leads and lifts including' cost of all materials, labour, royalty and taxes all complete as per building specification and direction of E/l (Mode of measurement complacted volume).

Providing designation 75 B one brick flat soling joints filled with local sand including cost of watering taxes royalty all complete as per building specification and direction of E/l.

Providing and laying in position cement of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:11/2:3 (1 cement :11/2 coarse sand (zone-lll) :3 gradde stone aggregate 20 mm nominal size)

providing and laying in position specified grade of reinforced cement concrete ,excluding the cost of centering ,shuttering, finishing and reinforcement - All work up plinth level. 1:1.5.3 (1 cement :1.5 coarse sand (zone-lll): 3 graded stone aggregate 20mmnominal size)

Centring and shuttering icluding strutting propping etc and removal of form for foundations, footings, bases of columns, etc. for mass concrete

reinforced cement concrete work in walls (any thickness), including attached pillasters, buttresses, plinth and string courses, fillets, columns, pillars, piers , abutments, posts and struts etc. above plinth level up to floor five level , excluding costo of centering, shuttering , finishing and reinforcement: 1:1:5:3 (1 cement :1.5 coarse sand(zone-lll) :3 graded stone aggregate 20mm nomimal size)

Centring and shuttering icluding strutting propping etc and removal of form for Columns, Pillars, Piers, Abutments, Posts and Struts

Providing designation 75 B brick work in C.M. (1:6) in foundation and plinth with approved quality of clean coarse sand of F.M. 2 to 2.5 including providing 10mm thick mortar joints, cost of screening materials, raking out joints to 15mm depth, curing, taxes and royalty all complete as per building specification and direction of E/l.

providing and laying damp- proof course 50mm thick with cement concrete 1:2:4 (1 cement :2 coarse sand (zone-lll) :4 grade stone aggregate 20mm nominal size).

Providing designation 75 B brick work in C.M.(1:6) in superstructure with approved quality of clean coarse sand of F.M. 2 to2.5 including providing 10 mm thick mortar joints cost of screening materials , scafolding , raking out joints to 15mm depth curing, taxes and royalty all complete as per building specification and direction of E/l.

reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15 degree landing, balconies , shelves , chajjas , lintels , bands, plain windows sills, staircases and spiral stair cases above plinth level up to floor five level , excluding the cost of centering , shuttering , finishing and reinforcement, with 1:1:5:3 (1 cement :1.5 coarse sand (zone-lll) : 3 graded stone aggregate 20 mm nominal size )

Centring and shuttering icluding strutting propping etc and removal of form for Lintels, beams, plinth beams, girders, bressumers and cantilevers

Centring and shuttering icluding strutting propping etc and removal of form for Weather shade, chajjas, corbels etc including edges

Centring and shuttering icluding strutting propping etc and removal of form for Suspended floors, roofs, landings, balconies and access platform

Providing and fixing fan hook of 16mm dia M.S. bar 1 metre long bent to required size and shape, placed in position and fixed in R.C.C. slab/beam at the time of casting all complete as per building specification and direction of E/l. (where material is not supplied by deptt.)

Providing Tor steel reinforcement of 8mm. dia. rods as per approved design and drawing excluding carriage of M.S. bars to work site , cutting, bending and binding with annealed wire with cost of wire, removal of rust placing the rods in position all complete as per building specification and direction of E/l. TMT Fe 500

Providing Tor steel reinforcement of 10mm. ,12mm & 16mm dia. bars as per approved design and drawing excluding carriage of M.S. bars to work site , cutting, bending and binding with annealed wire with cost of wire, removal of rust placing the rods in position all complete as per building specification and direction of E/l. (a) 10mm (TMT,Coil Fe 500)

(b) 12mm (TMT,Coil Fe 500)

(c) 16mm ( TMT bar Fe 500)

Providing 12mm cement plaster (1:6) with clean coarse sand of F.M. 1.5 including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/l.

Providing 6mm thick cement plaster (1:4) in ceiling with clean coarse sand of F.M. 1.5 including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/l.

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.

Providing two coats of oil bound distemper of approved shade and make over a coat of cement primer over new surface including preparing the plastered surface by rubbing smooth with pumice stone or fine sand paper, applying putty wherever required, scaffolding, washing of floors and taxes all complete as per building specification and direction of E/l.

Finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm)

Supplying, fitting and fixing 20 guage G.C.I, sheet gate fitted on M.S. Angle frame of size 60x60x6mm. including cost of fabrication , providing necessary locking arrangement with haskal and domny duly fixed in P.C.C. (1:2:4) blocks of required size, applying a priming red lead paint over steel work, taxes all complete as per drawing specification and direction of E/l.

Supplying, fitting and fixing glass panes including supplying putty, beads and nails after taking out old and broken glass panes and disposal of debris all complete as per building specification and direction of E/l. 6 mm plain.

Supplying, fitting and fixing M.S. grill made of 20x6mm M.S. flat as per approved design and drawing, properly fabricated with joints continuous fillet welded and finished smooth , carriage of grill to work site, hoisting as per building specification and direction of E/l. (where materials is not supplied by the deptt.)

Providing 25 mm thick first class patent stone flooring (1:2:4) with stone chips in two layers, bottom layer 19 mm thick (1:2:4) with 12 mm to 6mm size graded stone chips and top layer 6 mm thick (1:2) with 6mm down stone chips, in panels including cost of curing, finishing the surface smooth by rubbing with carborandum stone, taxes and royalty with all complete as per building specification and direction of E/l

Earth filling in foundation trenches and plinth in layers not exceeding 150 mm. thick well watered, rammed, fully compacted and fine dressed with earth obtained after cutting within a lead of 50 M. and lift of 1.5 M all complete as per building specification and direction of E/l (Mode of measurement compacted volume).

Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand (zone-III) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources) over 75mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling & dressing & finishing the top smooth.

Providing primer one coat of red lead paint of approved make over new steel surface including preparing the surface after cleaning, removing rust , dirt, , scales , smokes and grease and cleaning the surface thoroughly including cost of scaffolding and taxes all complete as per building specification and direction of E/l. ( Mode of measurement Area shall be multiplied by the co-efficient as indicated in building specification)

Providing and laying 6mm precast white glazed tiles in walls over 12mm cement mortar (1:3) and jointed with grey cement slurry flush pointed with white cement including rubbing, polishing and cost of curing, taxes and royalty all complete as per building specification and dire citon of Ell. commercial grade white 15 x 15 cm tiles.

Providing and laying rectifiod Glazod Coramic floor tlos of sizo |300x300 mm or moro (thicknoss to bo speclflod by tho manufacturor), of 1st quality conformlng to IS : 15622, of approved make, In colours Whito, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cemont imortar 1:4 (1 Cemont: 4 Coarso sand), jointing with groy cemont slurry @3.3 kg/ sqm Including grouting tho Joints with whito cement and matching plgments etc., complete

SIFIF PVC Water Storage Tank all complete job

SIFIF White glazed IWC pan all complete job

S/FIF white glazed Hand wash basin all complote job

Providing and fixing white vitreous china pedestal for wash basin complotoly recossed at the back for tho reception of plpes

SIFIF the following items of all complete job 100 mm Steel Jali

Soap dish

Towel rail

Glass Shelf 22"

Bib Cock long thread

Angular Stop cock

Pressure adjustable shower with revolving Joint

Mirror of 6 mm thick 600 x 450 mm

Wall mixer

Pillar Cock (|SI) long neck

S/FIF PVC Pipe for hot and cold water with fittings all complete 15 mm dia job

25 mm dia

SIFIF PVC 110 mm Pipe RWD) all complete job

S/FIF PVC pipe fittings all complete job Bend

Clips

Making soak pit 2.5 m diameter 3.0 metre deep with 45 x 45 cm dry brick honey comb shaft with bricks and S.W. drain pipe 100 mm diameter, 1.8 m long complete as per standard design. With common burnt clay F.P.S. (non modular) bricks of class designation 7.5

chamber of designation classs 75B bricks size 750mm deep, 600x450mm internal dimenslon having 250mm wall thickness in Jcement mortar (1:6) including 12mm cement plaster (1:4) with punning on inside and cement plaster (1:6) with 600x475mm G.l cover with frame ( weight not less than 36Kg) alongwith earthwork in excavation and 80mm thick PCC (1:3:6) in foundation and refilling all complete as per specification and direction of EN.

Providing and laying in position cement of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:2:4 (1 cement : 2 coarse sand (zone-lll) :4 gradde stone aggregate 40 mm nominal size)

Centring and shuttering icluding strutting propping etc and removal of form for Lintels, beams, plinth beams, girders, bressumers and cantilevers with waterproof ply 12mm thick

Centring and shuttering icluding strutting propping etc and removal of form for Suspended floors, roofs, landings, balconies and access platform with waterproof ply 12 mm thick

Providing 12mm cement plaster (1:3) with clean coarse sand of F.M. 1.5 including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/l.

Providing 1.5mm cement punning including curing, carriage of water with all leads and lifts as per building specification and direction of E/l.

chamber of designation classs 75B bricks size 750mm deep, 600x450mm internal dimenslon having 250mm wall thickness in Jcement mortar (1:6) including 12mm cement plaster (1:4) with punning on inside and cement plaster (1:6) with 600x475mm G.l cover with frame ( weight not less than 36Kg) alongwith earthwork in excavation and 80mm thick PCC (1:3:6) in foundation and refilling all complete as per specification and direction of EN.

Steel work in built up tubular (round, squaro or rectangular hollow tubes etc.) trusses etc., Including cutting, hoisting, fixing In position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. 10.16.1 Hot finished welded type tubes

Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineerin-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete Jupto any pitch in horizontal/ vertical or curved sufaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required

JProviding and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+0.05 %) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws complete : 12.51.1 Ridaes plain(500 - 600mm)

Providing and fixing 15 cm wide, 45 cm overall semi-circular plain |G.S. sheet gutter with iron brackets 40x3mm size, bolts, nuts and washers etc., including making necessary connections with rain water pipes complete. 12.7.1 0.80 mm thick with zinc coating not less than 275 gm/m2

Supply of Erection Bolts ( Minimum 04 nos for each element)

Exacavation for roadway in soil using manual means including loading in truck for carrying of cut earth to embankment site with all lifts and lead upto 1000 metres.

Providing and laying Pitching on slopes laid over prepared filter media including boulder apron laid dry in front of toe of embankment complete as per drawing and technical specifications

providing and laying cement concrete in retaining walls,return walls, walls (any thickness) including attached pillasters, columns, piers, abutments, pillars, posts, struts, butteresses , string or lacing courses , parapets , coping, bed blocks, anchors blocks, plain window sills , fillets, sunken floor etc., up to floor five level , excluding the cost of centering , shuttering and finishing: 1:11/2:3 (1 cement :11/2 coarse sand (zone-lll) :3 gradde stone aggregate 20 mm nominal size)

Providing & fixing 20 mm thick compressible fibre board in expansion joint complete as per drawing & Technical Specification.

Providing and laying 60mm thick faciory made cement concrete interlocking paver block of M -30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50mm thick compacted bed of coarse sand, filling the joints with line sand etc. all complete as per the direction of Engineer-in-charge.

Excavating, supplying and filling of local earth (including royalty) by mechanical transport upto a lead of 5km also including ramming and watering of the earth in layers not exceeding 20 cm in trenches, plinth, sides of foundation etc. complete

Earth filling in foundation trenches and plinth in layers not exceeding 150 mm. thick well watered, rammed, fully compacted and fine dressed with earth obtained from excavation of foundation frenches within a lead of 50 M. and lift of 1.5 M all complete as per building specification and direction of E/l (Mode of measurement compacted volume).

Providing designation 125 mm thick reinforced designation 75 A brick work in C.M (1:4) in superstructure with approved quality of clean coarse sand of F.M. 2 to 2.5 including the cost of screening, carriage of materials , scafolding, raking out joints to 15 mm depth, curing, taxes and royalty ( but excluding the cost of reinforcement) all complete as per building specification and direction of E/l.

Providing and laying in position cement of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:3:6 (1 cement : 3 coarse sand (zone-lll) :6 gradde stone aggregate 20 mm nominal size)

Providing two coats of synthetic enamel paint of approved shade and make over steel surface including cleaning the surface thoroughly, scaffolding and taxes all complete as per building specification and direciton of E/l.

Stone tile (polished) work for wall lining over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and cement slurry @ 3.3 kg/sqm including pointing in white cement complete. Granite of any colour and shade

Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works

Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade: 13.47.1 New work (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm)

Supplying at site Angle iron post & strut of required size including bottom to be split and bent at right angle in opposite direction for 10 cm length and drilling holes upto 10 mm dia. etc. complete.

Providing and fixing concertina coil fencing with punched tape concertina coil 600 mm dia 10 metre openable length ( total length 90 m), having 50 nos rounds per 6 metre length, upto 3 m height of wall with existing angle iron 'Y' shaped placed 2.4m or 3.00 m apart and with 9 horizontal R.B.T. reinforced barbed wire, stud tied with G.I. staples and G.I. clips to retain horizontal, including necessary bolts or G.I. barbed wire tied to angle iron, all complete as per direction of Engineer-in-charge, with reinforced barbed tape(R.B.T.) / Spring core (2.5mm thick) wire of high tensile strength of 165 kg/ sq.mm with tape (0.52 mm thick) and weight 43.478 gm/ metre (cost of M.S. angle, C.C. blocks shall be paid separately)

Finishing walls with Acrylic Smooth exterior paint of required shade : Old work (Two or more coat applied @ 1.67 ltr/ 10 sqm) on existing cement paint surface

Point wiring in PVC Conduit with piano type switch- wiring for |lighUFan Point/Exhaust fan point/Call bell point with 1.5mm FR PVC insulated copper conductor single core cable in surfacelrecessed PVC conduit with piano type switch,phenolic laminated sheet suitable size PVC/GI box etc. as required GROUP-C

Power plug wiring in PVC Conduit (2x4 Sgmm)-Wiring for light Power plug with 2x4Sqmm. FR PVC insulated copper conductor single core cable for loop earthing as reqd.

|Circuit/submain wiring in PVC conduit - Wiring for Circuitlsubmain wiring along with earth conductor, single core cable in surfacelrecessed PVC wire the following sizes PVC insulated copper conduit as required. 2 x 2.5 sq.mm. + 1x 2.5 sq.mm. earth wire

2x 6.0 sq.mm. + 1 x6.0 sq.mm. earth wire

|S/F piano type switch/socket Supplying and fixing following piano type switch/socket on the existing switch box/cover including connections etc. as required. 5/6 amps, one way switch

5/6 amps,Socket outlet

Electronic fan regulator deluxe

|S/F power plug point with piano type accessories Supplying and fixing suitable size G.LPVC box on surface or in recess with phenolic liminated sheet cover in front including providing and fixing 6 pin, 15/16 amps socket outlet and 15/16 amps piano type |switch connection, painting etc. as required.

S/F S.P. MCB DB Supplying and fixing following way single pole netural, sheet, MCB distribution board, 240 volts, on surfacelrecess, complete with tinned copper busbar, netural busbar, earth bar, din bar, detachable gland plate, interconnections, phosphatized and powder painted including earthing etc. as required (But without MCB/RCCB/lsolator) 8 way,double door

Supplying and fixing 6 amps to 32 amps rating, 240 volts, 10 kA, "C" cunvc, miniature circuit breaker suitable for inductive load of |following poles in the existing MCB DB complete with connections, esting and commissioning etc. as required. 6/32 amps, Single pole

40 amps, DP

Earthing with copper earth plate 600mm x 600mm x 3mm thlck |including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. (with charcoal or coke and salt) as required.

Supply and laying 8 SWG copper wire at 0.50 metre below ground level for conductor earth electrode, including solding etc. as required.

Providing and fixing following TP&N disconnector fuse switch unit in the exlsting metal board with ISl marked HRC fuses |including drilling holes in metal board, making connectlons. etc. as required. 63 amps, TP&N, HRC

Providing and fixing following capacity busbar chamber with 4 strips of length 300Omm made of copper suitable for following |capacity complete with all accessories including connections, earthing the body etc. as required. 100 amps

1200mm 48"ceiling Fan

XLPE insulated PVC Sheated , heay duty armoured electric cable with aluminium conductor upto and including 1100V M-16sqmm 4 core

|SITC of following rating surface mounted LED Tube Light fitting suitable for 230V 50HZ, Single phase supply etc. complete as required 20/22 W LED Tube Light

15/16 watt LED bulb

ErectBon of Steel pole upto 12m in c.C Erectlon of Steel tubular pole of length excoodlng 10 meters but not exceeding 12 motro ln cement concroto 1:3:6 (1 coment: Coarse sand: 6 graded stono aggregato 40mm nominal slzo) Foundation including excavatlon and rofilling etc as roqulred.

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. 25 mm nominal dia Pipes

20 mm nominal dia Pipes

Supplying, assembling, lowering and fixing in vertical position in bore well, unplasticized PVC medium well casing (CM) pipe of required dia, conforming to IS: 12818, including required hire and labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer -in-charge. 200 mm nominal size dia

Gravel packing in tubewell construction in accordance with IS: 4097, including providing gravel fine/ medium/ coarse, in required grading & sizes as per actual requirement, all complete as per direction of Engineer-in-charge.

Development of tube well in accordance with IS : 2800 (part I) and IS: 11189, to establish maximum rate of usable water yield without sand content (beyond permissible limit), with required capacity air compressor, running the compressor for required time till well is fully developed, measuring yield of well by "V" notch method or any other approved method, measuring static level & draw down etc. by step draw down method, collecting water samples & getting tested in approved laboratory, i/c disinfection of tubewell, all complete, including hire & labour charges of air compressor, tools & accessories etc., all as per requirement and direction of Engineer-in-charge.

Providing and fixing suitable size threaded mild steel cap or spot welded plate to the top of bore well housing/ casing pipe, removable as per requirement, all complete for borewell of: 200 mm dia

Providing and fixing M.S. clamp of required dia to the top of casing/ housing pipe of tubewell as per IS: 2800 (part I), including necessary bolts & nuts of required size complete.200 mm clamp

Providing and fixing Bail plug/ Bottom plug of required dia to the bottom of pipe assembly of tubewell as per IS:2800 (part I).

Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. 50 mm nominal dia Pipes

Supplying 150 mm dia submersible pumps set confirming to IS:8034 all complete job Submersible pump set 100 mm dia

Basic rate of standard ISI mark deep well hand pump for 1M II ISI 15500 (part 2) all complete job

Carriage of Materials Sand Lead (5K+30P) Km

Chips Lead (5K+25P) Km

Stone Metal Lead 22 Km

Bricks Lead (1K+7P) Km

Boulder Lead (5K+30P) Km

Earth Lead 5 Km

Add 12 % GST (in Basic Rate must fill 12)

Add 1% Labour Cess (in Basic Rate must fill 1)

GOPAL PRASAD GUPTA

M/S SAKSHAM ENTERPISES

NAKUL SINGH