ADDN/ALTN TO LIVING-IN SNCOs ACCN AT AF STN FARIDABAD UNDER AOR OF GE (AF) FARIDABAD

Amount

Taking down chowkat or frame with shutter (without taking oof shutter from frame) exc 1.5 sqm but not exe 4.00 Sq m each, complete all as specified and directed.

M&L for PCC 1:3:6 type C2 (40mm graded stone aggregate) as in foundation filling and mass concrete complete all as specified and directed.

M&L for Reinforced cement concrete M-25 (Design mix) using 20 mm graded stone aggregate in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and as directed.

M&L for Reinforced cement concrete M-25 (Design mix) using 20 mm graded stone aggregate in Columns, pillars, piers, posts and struts, basement slabs, under-reamed piles and mass concrete complete all as specified and as directed.

M&L for Reinforced cement concrete M-25 (Design mix) using 20 mm graded stone aggregate in beam, cantilevers, bressummers, lintels over 1.5m span, concrete complete all as specified and as directed.

S&F for Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 65 x150 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum comp?ressive strength of 58 N/mm2 , modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardan and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete all as specified and directed. (M.S. hold fast/ lugsor SS dash fasteners shall be paid for separately). Note: For WPC solid door/window frames,minus 5mm tolerance in dimension i.e.depth and width of profile shall be acceptable. Variation in profile dimensionson, plus side shall be acceptable but no extrapayment on this account shall be made.

S&F for Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2 , modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws complete all as specified and directed. Note: stainless steel butt hinges and necessary S S screws shall be paid separately

S&F for Factory made solid panel PVC wire gauge door shutter 30 mm thick (style) with both side prelam PVC sheet, consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and PVC sheet for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of wire gauge to be fitted in the M.S. frame welded / sealed to the stiles & rails .The wire gauge shall be wrapped on an additional square 8 mm MS solid tube and this tube shall be welded to MS tube. The wire gauge shall be streched to tighten firmly including supply and fixing in the frame at site as per specification and drawing.

S&F 100 mm long Butt hinges, cast brass, with mild steel hinge pin, bright polished and fixed, type B-1, complete all as specified and directed.

S&F 150mm long Brass handles,cast type, polished bright, complete all as specified and directed.

S&F 2 Levers, Brass Mortice lock, vertical type, size 100 mm complete all as specified and directed.

S&F 200mm long Brass tower bolt, with cast or sheet barrel and rolled or cast bolts and fixed complete all as specified and directed.

S&F floor door stopper of size 140mm overall length, Brass body and tongue with hard drawn steel spring complete all as specified and directed.

S&F 300mm mild steel, ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed.

M&L TMT bars 10 mm dia & over cut to length, bent to shape required including cranking bending spirally for hooping for column, hooking ends & binding with & including mild steel wire (not less than 0.9 mm dia) or securing with clips quality conforming complete all as specified and directed.

All as per item No 16 above but 5mm dia and over upto and including 10mm dia in stirrups,spacers and binder.

M&L for 25mm thick Damp Proof Course in Plain cement concrete type B-0, 1:2:4 (using 12.5 mm graded stone aggregate) to horizontal or vertical surfaces including necessary formwork complete all as specified and directed.

M&L for Applying evenly a coat of blown type bitumen at the rate of 1.50 kg per square metre and blinding with clean dry sand @ 0.05 cum per sqm, complete all as specified and directed.

M&L for polythene film, 50 micron thick, laid on a coat of bitumen primer @ 0.30 to 0.50 kg per sqm complete all as specified and directed.

Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter complete all as specified and directed.

Formwork to sides of Square,rectangular or polygonal pillars, posts, struts, piers, columns and stanchions complete all as specified and directed.

M&L for Brick work with sub class `B' bricks straight or curved on plan exc. 6 metre mean radius built in cement mortar (1:6) using old size bricks, complete all as specified and directed.

Taking down cement plaster, any description, on brick or stone walls etc, including raking out joints, hacking for key, scrubbing down with water etc and disposal of debris complete all as specified and directed.

M&L for 15mm thick plaster in cement mortar (1:4) on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement with WPC @ as per manufacturer instructions complete all as specified and directed. Note :- WPC shall be measured and paid separately.

M & L for rendering 15mm thick in cement mortar (1:6) on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed.

M&L for rendering 10mm thick plaster in cement mortar (1:3) as in ceiling, finished even and smooth (without using extra cement) complete all as specified and directed.

Supply only Liquid Water Proofing Compound complete all as specified and directed.

M&L for preparation of new plastered surfaces of wall and applying two coats of oil emulsion distemper over a coat of chalk whiting including one coat of wall care putty of thickness 3mm, complete all as specified and directed

M&L for preparation of new plastered surfaces of ceiling and applying two coats of white wash, complete all as specified and directed.

M&L for preparation of new plastered surfaces of wall and applying two coats of cement base paint on wall complete all as specified and directed.

M&L for complete removal of existing treatment including preparation of old plastered surfaces and applying two coats of cement base paint on wall complete all as specified and directed.

M&L for complete removal of existing treatment of walls including preparing old plaster surfaces filling of holes with plaster of paris and applying two coat of oil bound distemper complete all as specified and directed.

M & L for preparation old surfaces of ceiling and two coats of white wash in ceiling complete all as specified and directed.

Demolition of cement concrete (unreinforced) in ground floors and pavings not exceeding 15cm thickness (below or above ground level) including floor finishes/tiling work and disposal of debris to outside the station where suitable for contractor complete all as specified and directed.

M&L for Machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing complete all as specified and directed.

M&L for Non skid coloured ceramic coloured plain tiles,300 x 300 x 7mm thick, conforming to IS-13712, first quality, laid in floors, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles complete all as specified and directed.

M&L for 25mm thick Plain cement concrete 1:2:4 type B-0 using 12.5mm graded stone aggregate as in floor/sub base and finishing concrete surface fair and even to receive top floor finishes complete all as specified and directed.

M&L for Providing screed bed or bedding layer, 15 mm thick, in cement mortar (1:6) for laying floor finishes complete all as specified and directed.

M&L for Glazed ceramic tiles, 300 x 450 x 7mm/350 x 450 x 7mm thick, glossy finish, conforming to IS-13712, first quality, of approved colour, laid on vertical surfaces such as skirting or dado etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles complete all as specified and directed.

M&L for rendering, 10 mm thick, in cement mortar (1:4), on wall surafaces, as backing coat to tiles complete all as specified and directed.

M&L for Non-skid Ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

M&L for machine pressed precast concrete interlocking paver block, any shape and size confirming to SI 15658-2006 of 60 mm thickness, M-35 Grade with grey cement and pigment over 25 mm thick levelled sand cusining etc, complete all as specified and directed. Note : Sand shall be measured and paid separately

M&L for Sand filling under floors or in foundations including watering and consolidation complete all as specified and directed.

M & L for 100mm thick Plain cement concrete type D-2 1:4:8 (using 40mm graded stone aggregate) complete all as specified and directed.

M & L for Hardcore of broken brick or boulders gauge n exc. 63mm, deposited, spread and levelled in layers n exc. 15cm thick, watered and rammed to a true surface complete all as specified and directed.

M&L for 75mm thick Plain cement concrete type C-2, (1:3:6), using 40mm graded aggregate as in plinth protection or path including necessary formwork complete all as specified and directed.

M & L for treating the soil under plinth protection at the rate of 5 litres of emulsion per Sqm of surface area, (with 20% EC) complete all as specified and directed.

M&L for moorum/red bajri filling in floors or pavings, laid in layers n exc. 15cm thick, spread, levelled and rammed including watering complete all as specified and directed.

Dismantling water tank of capacity 1000 ltr complete all as specified and directed.

S&F 1000 Ltrs,tripple layered Rotational molded polyethylene water storage tank, ISI marked (cylindrical vertical with threaded lid) hoisted and fixed in position all as specified in SSR Part-I with GI Tank Nipple inlet and outlet 20mm complete all as specified and directed.

S&F Ball valve, high pressure with of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe or fixed of size 20 mm bore, fixed in repairs (Min Wt 20mm- 210 gms) complete all as specified and directed.

S&F Gun metal globe or gate valves high pressure with polythene float and fly nut complete screwed for iron pipe or for unions of 20 mm bore and fixed in repairs complete all as specified and directed.

S&F Gun metal globe or gate valves high pressure with polythene float and fly nut complete screwed for iron pipe or for unions of 25mm bore and fixed in repairs complete all as specified and directed.

Taking up or down steel tubing with connections complete of bore 15mm complete all as specified and directed.

Taking up or down steel tubing with connections complete of bore 20mm complete all as specified and directed.

S&F 15 mm bore ,UPVC high grade , including all fittings (like Elbow , Tee, Socket, Gi pipe connecter, nipples, tank connector etc) and fixing solutions/adhesive or chemicals and fixed complete to walls and ceilings or laid in floors or concealed complete all as specified and directed.

S&F 20 mm bore ,UPVC high grade , including all fittings (like Elbow , Tee, Socket, Gi pipe connecter, nipples, tank connector etc) and fixing solutions/adhesive or chemicals and fixed complete to walls and ceilings or laid in floors or concealed complete all as specified and directed.

M&L for Mild steel framed work such as angles, flats, squre bars, grills, gratings, tank staging etc. with ends of bars shouldered and/or riveted or forged into spikes, framed guard bar; barred iron doors; door frame, gates ladders and similar work conforming to Fe 290 Gde-E-165 complete all as specified and directed.

M&L for prepartion on new surface of steel & iron work of any description not specifically mentioned otherwise over 10 cm width or girth & applying two coat of synthetic enamal paint over one coat of red oxide primer complete all as specified and directed.

Taking down chowkat or frame with shutter (without taking oof shutter from frame) not exc 1.50 Sqm each complete all as specified and directed.

S&F 30mm thick (styles) factory made solid panel PVC door shutters consisting of frame made out of MS tubes for top & bottom rails MS frame shall be covered with heat moulded plain colour PVC `C' channel having a PVC sheet strip of 20mm width tuck inside with solvent cement for styles & plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail and bottom rail, panelling of plain colour PVC sheet to be fitted in MS frame welded/sealed to the styles & rails with suitable PVC sheet beading and joined together with solvent cement and fixing in the frame at site, complete all as specified and directed.

S&F solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with mild steel tube & fixed in position as per manufacturer's instruction, complete all as specified and directed.

S&F 100mm long, stainless steel butt hinges, complete all as specified and directed.

S&F 300 mm long aluminium anodised sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolt and sliding bolts of extruded sections or cast aluminium alloy, fixed, complete all as specified and directed.

S&F 200 mm long Aluminium anodised, barrel tower bolt, of extruded section, fixed, complete all as specified and directed.

S&F 150 mm long extruded aluminium alloy handle, fabricated type, anodised, complete all as specified and directed.

S & F in repairs 20mm wide door seal aluminium powder coated fixed with screws on bottom rails of door shutters complete all as specified and directed.

S&F Powder coated aluminium anodized frame(minimum thickness of powder coating 50 micron) for doors,windows, ventilators with one or more rebates including joining cleat for fixing etc complete all as specified and directed.

S&F Powder coated aluminium anodized section (minimum thickness of powder coating 50 micron) for shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/neoprene gasket required (Fittings shall be paid for separately) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws all complete as per architectural drawings and complete all as specified and directed.

S&F 4.8 mm thick sheet glass ordinary quality, fixed with oil putty or beads fixed with screws in sequence exceeding 0.5 sqm in each pane complete all as specified and directed.

S&F Stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40mm and fixed in wooden/steel/ Aluminium windows, or Stainless steel wire staples complete all as specified and directed.

S&F Door closer hydraulically regulated, designation No 3 universal type aluminium (Die cast) body for suitable for door shutter of 851 to 1000mm in width and weight between 36 to 60 kg and fixed all as specified and directed. including taking down old floor spring hydraulically complete all as specified and directed.

S&F in repair vitreous china wash down closet pan (Pedestal Patern) white excluding flushing cistern and flush pipe incl connection to outgoing pipe and flushing pipe but including PVC Sheet cover complete all as specified and directed.

S&F in repair Vitreous china urinal, bowl type, flat back, size of 465 x 355 x 265mm (minimum), white, complete including Waste coupling of PTMT (half or full threaded) .suitable for urinals, (Minimum weight 32mm-45gms, providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60cm long brass screws, pointing around urinal back in cement, with grating and union for discharge pipe and PVC waste pipe and CP urinal spreder at top of urinal, including making all connections to existing connections, fixed complete all as specified and directed.

S&F in repair vitreous china wash basin, Vitreous China any size, including Waste coupling of PTMT (half or full threaded) (Minimum weight 32mm-45gms/40mm-60 gms & cutting for and pinning in ends of bracket or erecting stand fixing of waste pipe etc complete all as specified and directed.

S&F in repair sink made up of stainless steel 1 mm thick, kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm complete all as specified and directed.

S&F in repair PVC (Plastic polymer Cistern) valve less, Symphonic action type, flushing cistern of capacity 10 liters, low level, white with inlet, ball valve, manually operated with one PVC ball valve horizontal plunger type including provision of 32mm PVC flush pipe of required length and making connections complete including taking down by dismantling the existing unserviceable cistern of any description with front knob complete all as specified and directed.

S&F in repair 15 mm angle stop valves (fancy type),PTMT, screwed down high pressure with crutch and butter fly handles , screwed with iron pipes or for union complete all as specified and directed.

S&F in repair 15 mm bore , Pillar taps (fancy type), PTMT, with capstan heads,screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts,screwed for iron pipe and fixed complete all as specified and directed.

S&F in repair , Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and directed.

S&F in repair 15 mm dia. long body, Bib tap, standard of PTMT, any colour high pressure screwed for 15 mm bore iron pipe/ cpvc pipe and fixed complete all as specified and directed.

S&F PVC waste pipe 800mm long suitable for 32mm dia waste coupling of plane PVC pipe (Not foldable type) of good quality sutable for WHB or urinal complete all as specified and directed.

S&F in repair PVC connections 15 mm size with PTMT nuts suitable for geaser of length 450 mm long complete all as specified and directed.

S&F in repair Soap dish, any type, fixed to plugs with chromium plated brass screws complete all as specified and directed.

S&F PVC (SWR) floor trap, plain with CP grating including jointing with solvent cement, 75mm diameter of outlet complete all as specified and directed.

S&F PVC(SWR) bends suitable for 110 mm external dia complete all as specified and directed.

S&F in repair fancy Brass Hat and coat hooks solid body, 175mm to 250mm long with minimum 04 hooks complete all as specified and directed.

S&F Towel Ring of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 90gms) complete all as specified and directed.

Taking down rainwater pipes/PVC pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., (measured overall as fixed along the centre line over fittings and accessories) complete all as specified and directed.

S&F PVC(SWR) pipes, 110 mm external dia, double socketed in any length with rubber joints, fixed to walls with PVC brackets/clamps complete all as specified and directed.

S&F PVC(SWR) bends suitable for 110 mm external dia complete all as specified and directed.

S&F PVC(SWR) Tee suitable for 110 mm external dia complete all as specified and directed.

S&F PVC(SWR) pipes, 75 mm external dia double socketed in any length with rubber joints, fixed to walls with PVC brackets/clamps complete all as specified and directed.

S&F PVC(SWR) bends suitable for 75 mm external dia complete all as specified and directed.

S&F PVC(SWR) tee suitable for 75 mm external dia complete all as specified and directed.

S & F Stainless steel Harrison curtain rods, 19/20mm dia, including stainless steel brackets and fixing brackets as per side requiement etc including taking down old one complete all as specified and directed.

S&F Pre painted GalvaIume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall fixed with self tapping screws etc complete all as specified and directed.

S&F Pre painted GalvaIume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall fixed with self tapping screws etc complete all as specified and directed.

Excavation in trenches, n.exc 1.5m wide and n.exc 1.5m in depth,for foundation etc or for shafts, wells,cesspits, mandholes, pier holes, cables, pipes etc n.exc 10sqm on plan and n.exc 1.5m in depth and getting out in soft/loose soil complete all as specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25 cm thick complete all as specified and directed.

Removing surplus soil to a distance not exceeding 50 m and depositing where directed at a level not exceeding 1.5 m above the starting point complete all as specified and directed.

Supplying and laying un-reinforced precast concrete cable cover, class LV, Type 1 with peak, size 250 mm x 150mm x 40mm complete all as specified and directed.

Supply, lay, spread in trenches river sand including spreading, levelling, punning for cushioning of cable complete all as specified and directed.

Supply and laying in trenches, LT underground cable of size 4 core 35 Sqmm XLPE insulated armoured and PVC sheathed 1100 Volts grade with aluminium conductor multistranded including cable connecting lugs, glands jointing materials etc.laid in trenches, floors, roof, ducts and fixing using clamps, saddle for pole, wall complete all as specified and directed.

M&L GI tubing light grade 50 mm bore intrenches/fixing on pole/wall/crossing in drain etc. for protection of UG cable complete all as specified and directed.

Taking Down carefully Copper/aluminium Point Wiring (light, fan,socket or Power) complete,(fittings Such as switches, ceiling roses, pendents, regulators sockets etc, to be measured separately), removing materials to store for keeping in safe custody for reuse at site and making good disturbed surfaces of walls, floors etc complete all as specified and directed.

Taking down carefully aluminum two core sub main wiring of sizes 6 Sqmm /4 Sqmm cable any type and removing old material from site and making good disurbed surface complete all as specified and directed.

M&L for point wiring complete with 1.5 sqmm single core multistranded copper conductor PVC insulated and unsheathed cable 1100 volts grade FRLS cable IS-694 marked drawn through and including rigid non metallic PVC heavy duty concealed conduit(min 20 mm dia (external) ISI marked with wall thickness not less than 1.8mm including conduit accessories like bends.tees, juction boxes etc fixed concealed in wall/ceiling or surface conduit on ceiling with provision of 2 mm thick pressed steel terminal boxes covered with 3 mm thick plastic laminated white /coloured top cover for mounting switch,socket,fan regulator,industrial socket and all lamp fittings etc including 1.5 sq mm PVC insulated but unsheathed copper conductor FRLS cable,1100 volt grade IS-694 marked as earth contuinity wire for one light/Fan point controlled by one,one way switch complete all as specified and directed.

All as per Item No 110 above but on the same board

All as per item No 110 above but one three pin 5 Amps socket out let on independant board

All as per item No 110 above but 15 Amps 3 pin socket outlet on independent board with 2.5 sq mm PVC insulated and sheathed copper conductor with 2.5 sq mm PVC insulated copper conductor single core for continuous earthing complete.

S&F Piano switch, flush button single pole one way 6 Amp complete all as specified and directed.

S&F socket outlet, flush type 2 in 1, 3 pin 6 Amp complete all as specified and directed.

S&F socket outlet, flush type 2 in 1, 3 pin and 6/16 Amp complete all as specified and directed.

S&F Piano switch flush button single pole one way 16 Amp complete all as specified and directed.

S&F stepped type electronic fan regulator, in repairs, flush type on the existing phenolic laminated sheet etc complete all as specified and directed.

S&F in repairs,ceiling rose surface backlight, 65 x 50 mm three terminals complete all as specified and directed.

S & F Sheet metal Single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB 20 Amps, 240 V complete all as specified and directed.

Supply and Fix metal enclosures for VTPN suitable for MCCB upto 125 Amps as incomer distribution board 415 Volts optium F1+12, 4 way double door IP-54 protection including flushing the DBs inside the walls and making good the disturbed surface also matching with the existing surface complete all as specified and directed.

Supply and fixing 125 Amps MCCB four pole, 16 KA, 415 Volts,50 Hz Adjustable type complete all as specified and directed.

Supply and fix sheet metal enclosures for MCB distribution board 230 Volts Single pole and neutral 12 way Double door with 200 Amps rated busbar complete including flushing the DBs inside the wall and making good to the disturbed surfaces and also matching with the existing surface complete all as specified and directed.

Supply and fix sheet metal enclosures for MCB distribution board 230 Volts Single pole and neutral 8 way Double door with 200 Amps rated busbar complete including flushing the DBs inside the wall and making good to the disturbed surfaces and also matching with the existing surface all as specified and directed by Engr-in-Charge.

S&F in repairs MCB SPN 6 to 32 Amps, 240 Volts,"B" grade complete all as specified and directed.

Supply and fix MCB single pole, 240 volts, 6 to 32 Amps 10 KA complete all as specified and directed.

M&L for two single core PVC insulated cable with copper conductor multi stranded 4 Sqmm in and incl. duly drawn through and including concealed PVC conduit of minimum 20 mm size as sub main with continuous earth wire 4 Sqmm size and connecting to common earth dolly all complete all as specified and directed. (Flexible Copper Wire Used in FRLS) Note : Two run of 4 Sqmm and One run of earth continuous wire of 4 Sqmm and PVC conduit deemed to meausred as One run.

Supply and fixing LED lights fitting 1x 20 W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed.

Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.

Supply and fixing LED-Post top 40 Watts, 230 V, IP 65, 5700K rated with control driver with efficiency 90% pure coated aluminium die cast and spun aluminium body with clear/opal diffuser suitbale for landscape lighting for uniform illumination prewired including all accessories and connecting up with twin core copper conductor with suitable size complete all as specified and directed.

Supply and fixing LED luminaire 600 mm x 600 mm, 40 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and directed.

Supply and fix wall mounted cabin fan super high speed portable 450 mm sweep,220-240 volt AC,50 Hz sigle phase with Thermal overload protected motor complete all as specified and directed.

Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) complete all as specified and directed.

Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 300 mm complete all as specified and directed.

M&L for Earthing complete with galvanised steel earth plate electrode 600 x 600 x 6mm thick buried in ground vertically to a depth not less than 2.25m below ground level with top edge of the earth plate not less than 1.5m below normal ground level, connected to galvanised earth lead wire 4 mm GI earth continuity conductor including 15 mm bore pipe Light grade for protection of lead by means of bolts, nuts, check nuts and washers made out of galvanised iron or steel connected to maint switch control board upto 7.5 mt away from earth electrode all as shown as per plate No 03 of SSR part - I including necessary earth work, in any type of soil PCC 1:3:6 type C1 chamber, RCC cover slab of 50 mm thick 1:2:4 type B-1 with 8 mm CTD 75 mm C/C with suitable handle, watering pipe 20 mm dia light grade pipe with funnel, charcoal, salt and testing on completion and including taking old unserviceable earthing with connected items complete all as specified and directed.

Net contract sum will be after deducting Sch of Credit of Rs. 32294.00

RRR CONSTRUCTIONS (BID ID -3137170)

laxmi enterprises (BID ID -3128204)

Singh Associates (BID ID -3137106)

H.B. Traders (BID ID -3131843)