Construction of OPD Block of CHC Kalanaur (Rohtak) (Pdg. E.I. only).

Amount

( c ) Moulded case Circuit breakers

31.12 (c) Supply and erection of moulded case circuit breakers on wall or on existing pedestal including bonding to earth and necessary connections.

31.12 c (ii) 100 amp.to 220 amp.415 V,10 KA 3-phase

Distrubution board with plug and socket.

31.15 Supply and erection of sheet steel enclosure 2 pole / 3 pole with earth plug and socket suitable for incorporating single pole / triple pole MCB on wall / on existing pedestal complete with necessary connections etc.

31.15 (ii) S.P.N. enclosure for single pole MCB 20 amp.

(L) Miniature Circuit Breaker and Isolator. 31.17 Supply and erection of miniature circuit breaker / isolator 240 /415 V in the existing distribution board including making necessary connections.

(a) Miniature circuit breakers of 9 KA breaking capacity

31.17a) (ii) SP MCB 6 amp. to 32 amp.

31.17(a) (iii) TP MCB 40 amp. to 63 amp.

31.17(a) (iv) TPN MCB 40 amp. to 63 amp

(M) Supply and erection of Fittings and Accessories.

31.18 (vii) Call bell 220 / 230 volts A.C. bakelite with double coil.

31.18 (ix) (b) Bell push flush type ( without flexible wire ) in existing sheet.

31.18 (xi) Bakelite angle / straight button holder large size

31.18 (xxvi) Supply and erection of hexagonal M.S. box 1.60 mm thick having each side 8 cms , 7.5 cms deep top covered with M.S. lid by means of screws including 10 mm dia 30 cm long mild steel rod made into suitable suspension hook and erected in RCC slab for erection of fan , the bottom covered with 3 mm thick bakelite sheet with suitable holes , painting etc. complete with all labour and material required to complete the job.

(P) Pipe Laying. 31.21 Supply and erection of pipe for wiring purposes including bends inspection boxes etc. where necessary and painting as required.

31.21 (xxi) Heavy gauge welded conduit pipe 20 mm dia 1.60 mm thickness flushed

31.21 (xxii) Heavy gauge welded conduit pipe 25 mm dia 1.60 mm thickness flushed

31.21(xxx) Supply and erection of PVC pipe of 6 kg. pressure laid 1 metre below ground level complete including digging refilling of the trench with jointing etc.

31.21(xxx) (b) PVC pipe 80 mm dia

31.22 (Q) Earthing

31.22(ii) Extra for using salt and charcoal / coke for pipe earth electrode as required

31.22(iii) Earthing with GI earth plate 600 mm x 600 mm x 6 mm thick including accessories and providing masonry enclosures with cover plate having locking arrangement and watering pipe etc. ( but without charcoal or coke and salt ) complete as required

31.22(v) Extra for charcoal or coke and salt for G.I. Plate or copper plate earth electrode

31.22(xvi) Pdg. and fixing 4.00 mm dia G.I.wire on surface or in recess for loop earthing as required

31.26 Supply and erection of under ground cable ,loose in existing pipe or trenches complete with necessary connections

31.26 (xxx) Ard.120 Sq. mm 3.5 Core Cable

(X) Miscellaneous

31.35 (vii) Supply and erection of 75 mm x75 mm x 60 mm deep M.S.box for telephone and inter-communication system including 2 pin 5 amp. socket including cost of bakelite sheet .

31.36 PVC insulated wiring in recessed conduit wiring in 1.5 sqmm PVC insulated copper conductor cable in 1.6 mm thick conduit pipe.

( I ) Fan Point

( b) Medium Point

( b) Long Point

( II ) Light Point

( a) Short Point

( b) Medium Point.

( c) Long Point

31.36 (III) Twin control light point with 2 way, 5 amp. single pole switch.

© Long point

( VI ) Call bell point including M.S. Box of size 180 mm x 100 mm x 60 mm deep for call bell.

( c) Long Point

( VII ) 3-Pin 5 Amp. plug point including earthing the 3rd Pin etc.

(a) Short point

(b) Medium Point

( c) Long Point

( VIII ) 3-Pin 15 Amp. plug point with 4 Sqmm PVC insulated copper conductor cable including earthing the 3rd Pin etc.

( c) Long Point

31.40 Supply & erection of PVC unsheathed copper conductor cbale single core 1100 volts grdae in pipe of suitable size excluding cost and erection of pipe

31.40 (i) Cable size 1.5 Sqmm ( 3/0.81 mm ).

31.40 (iii) Cable size 4 Sqmm ( 7/0.85 mm ).

31.40 (iv) Size 6 sqmm ( 7/1.05 )

31.40 (v) Size 10 sqmm ( 7/1.35 )

31.41 Supply & erection of double door sheet steel enclosure distribution board suitable for MCBs and ELCBs etc. recessed in wall including bonding to earth with all labour and material required to complete the job in all respect upto the entire satisfaction of the Engineer-in-charge of the work

31.41 (vi) 8-way , TP&N ( Horizontal) (8+24)

31.44 Supply and erection of PVC pipe ISI marked ( Medium ) recessed in wal / ceiling etc. including the cost of PVC bends , inspection boxes , iron hooks and cement concrete etc. complete in all respect upto the entire satisfaction of Engineer-in-charge of work.

31.44 (ii) 25 mm dia.

31.66 Supply & fixing of rotary handle for on/off operation of existing MCCB in the LT panel including fixing the same in position with all labour and material requied to complete the job in all respect.

(i) Rotary handle upto 125 Amp. MCCB

31.67 Supply and erection of mark double walled corrugated (DWC) HDPE pipe laid 1Mtr. Below ground level including diging and refilling of earth including cost of sutiable size socket/cuppler for HDPE pipe including the cost of labour and material required to complete the job in all respect upto the entire satisfaction of Engineer-in-Charge of the work

(i) HDPE pipe 145/123 mm outer dia/inner dia

M.R. items

NS-1 Supply & erection of M.S. Box made of 16 Gauge of size d 8" x 10" x 4" covered with3 mm thick bakelite sheet white colour of ISI Mark fixed by means of 4 Nos. brass screws with cost of 1 No. 15 Amp. multi socket of ISI Mark and 15 Amp. switch and 3 Nos. 5 Amp. multi-socket with 5 Amp. switches of ISI Mark including fixing the M.S. Box in wall with cost of cement sand mixture including painting of M.S. Box and to complete the job in all respect upto the entire satisfaction of Engineer-in-charge of the work. (Based on HSR)

NS-2 Supply & erection of double door (Indo Asian / Havells / standard make) sheet steel enclosure distribution board (Suitable for MCCB as incomer and MCB for out going circuit but with out cost of MCCB / MCB etc. The distribution board duly recessed in wall / surface mounting necessary connections with all labour & material required to complete the job in all respect up to entire satisfaction of Engineer-in-charge of the work

4 way double door D.B.