Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Infra Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹45.8 LAccepted-AOC N A | NA | NA | 121004 | L1 | Accepted-AOC L1 Bidder | |
| 2 | L2₹48.2 L+₹1.9 L (4.03%)Rejected-Finance SIMULBARI T E PO VILL SIMULBARI PS KURSEONG DIST DARJEELING PIN 734009 WEST BENGAL | SIMULBARI | DARJEELING | WEST BENGAL | 734009 | L2 | Rejected-Finance Not Lowest Bidder | |
| 3 | L3₹48.4 L+₹2.1 L (4.58%)Rejected-Finance 30 HAREN MUKHERJEE ROAD HAKIMPARA SILIGURI 734 001 DARIEELING WB | DARJEELING | WEST BENGAL | 734001 | L3 | Rejected-Finance Not Lowest Bidder | |
| 4 | L4₹48.6 L+₹2.3 L (4.90%)Rejected-Finance GEETANJALI COMPLEX B BLOCK 2ND FLOOR MUKUNDA DAS ROAD MILANPALLY SILIGURI 734405 DARJEELING | SILIGURI | DARJEELING | WB | 734405 | L4 | Rejected-Finance Not Lowest Bidder | |
| 5 | L5₹48.9 L+₹2.6 L (5.55%)Rejected-Finance | L5 | Rejected-Finance Not Lowest Bidder |
Tender Value
₹42.5 L
EMD Value
₹85,040
Closing Date
12 Mar 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Garrison Engineer Sukna
Garrison Engineer Sukna, Post-Simulbari, Dist.-Darjeeling, WB-734009
SPL REPAIR TO CERTAIN MES INSTALLATION AT SUKNA MIL STN AND CERTAIN OTHER SANTIONED WORKS UNDER GE SUKNA IN SUKNA MIL STATION
2024_MES_637081_2
GE Sukna/8602
Open Tender
Civil Works
Works
270 days
Sukna
AS PER TENDER DOCUMENTS
8 documents required · 8 mandatory
₹500
GE Sukna
₹85,040
Yes
2 Apr 2024
26 Feb 2024
13 Mar 2024
26 Feb 2024
12 Mar 2024
5 Mar 2024
27 Feb 2024 - 12 Mar 2024
Amount
Excavation in trenches not exc. 1.50 m wide and not exc. 1.50 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. not exc. 10 Sqm on plan and getting out in soft / loose soil complete all as specified and directed.
Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc. 25 cm thick in each layer as in soil complete all as specified and directed.
Surface dressing not exc. 15 cm deep as in soft / loose soil complete all as specified and directed.
Surface dressing not exceeding 15 cm deep in soft/ loose soil including site clearance near the 2/4 pole structures GODs and various unmanned electric sub stations inside outside of premises complete all as specified and directed
M & L for sand filling under floors or in foundations including watering and consolidation as required complete all as specified and directed.
Boring/ Drilling (horizontally) manually under 2m deep in soil below existing road suitable for passing GI tubing of 40 to 80 mm bore complete all as specified and directed.
Removing surplus excavated material (SOIL) to distance not exc. 50 m and depositing where directed at a level not exc. 1.50 m above the starting point complete all as specified and directed.
M & L for Hardcore of gauge not exc. 63 mm, deposited, spread and leveled in layers not exc. 15 cm thick, watered and rammed to a true surface using broken stone or broken boulders complete all as specified and directed.
M&L PCC 1:4:8 type D-2 (using 40 mm graded crushed stone aggregate) as in foundation, filling and mass concrete complete all as specified and directed.
M&L PCC 1:3:6 type C-2 (using 40 mm graded crushed stone aggregate) as in foundation, filling and mass concrete including dismantling etccomplete all as specified and directed.
M&L for PCC 1:2:4 type B-2 (using 40 mm graded stone aggregate) as in surface channel and drain complete all as specified and directed.
M&L for Plain Cement Concrete Type B-1 1:2:4 (using 20 mm graded stone aggregate) in surface channels and drains finished even and smooth using extra cement including necessary formwork complete all as specified and directed.
M&L PCC 1:3:6 type C-1 (using 20 mm graded crushed stone aggregate) as in copings, bed plates, bed block for holdfasts, filling in pressed steel door frames, wall of drains, benching, kneelers, apex stones, bed plates, kerbs, water troughs and the like including weathering, slightly rounded or chamfered angles and throating and including necessary formwork complete all as specified and directed.
M&L cement concrete 1:2:4 type B-0 (using 12.50 mm graded crushed stone aggregate) as in coping of poles,wall, top of drain and similar work etc and including necessary formwork complete all as specified and directed.
M&L for Reinforced Cement Concrete Type B-1 1:2:4 (using 20 mm graded stone aggregate) in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, deck slabs and in shelves and the like complete all as specified and directed.
M & L for providing Reinforced cement concrete ,1:2:4, Type B-1 (using 20 mm graded stone aggregate) as in beams, cantilevers, bressummers, lintels over 1.5 m span and like complete all as specified and directed. Note :- Reinforcement shall be measured and paid separately under respective item
M&L precast reinforced cement concrete 1:2:4 type B-1 (using 20 mm graded crushed stone aggregate) in landing, cover slabs (for manholes etc), chullah hoods, chajja, water troughs, mangers, shelves and similar articles with plain faces set in CM 1:4 complete all as specified and as directed.
M & L for providing reinforced cement concrete 1:2:4, Type B-1, Nominal Mix using 20 mm graded stone aggregate as in foundation including rafts, footing, foundation beams, plinth beams, bases for columns, basement slabs, under-reamed piles and mass concrete complete all as specified and directed. (Note :- Reinforcement shall be measured and paid separately under respective item)
M & L for providing Reinforced cement concrete ,1:2:4, Type B-1 (using 20 mm graded stone aggregate) as in beams, cantilevers, bressummers, lintels over 1.5 m span and like complete all as specified and directed. (Note :- Reinforcement shall be measured and paid separately under respective item)
M & L for providing Reinforced cement concrete 1:2:4, Type B-1, Nominal Mix using 20 mm graded stone aggregate as in columns, pillars, piers, posps and struts complete all as specified and directed. (Note :- Reinforcement shall be measured and paid separately under respective item)
M&L for repair to broken/damaged RCC chajjas by making good with PCC 1:2:4 type B1 or rendering 15 mm thick in cement mortar 1:4 mixed with water proofing compound to top and sides and rendering 5 mm thick to soffits in cement mortar 1:3 including necessary form work, reinforcement duly welded if required including demolition of broken/loose PCC or taking down old plaster at any storey of building complete all as specified and as directed. (Note: Rate shall be included for necessary scaffolding and safety arrangement)
Supply only integral water proofing compound complete all as specified and directed.
M & L for brick work with sub class ‘B’, old size brick straight or curved on plan exc. 6.00 m mean radius built in cement mortar 1:6 complete all as specified and directed.
M & L for brick work with sub class ‘B’, old size brick straight or curved on plan exc. 6.00 m mean radius built in cement mortar 1:6 including demolition of bricks complete all as specified and directed.
BLANK
M&L for Brick work with sub-class 'B' bricks, straight or curved on plan to any radius in half brick as in drain built in cement mortar 1:4 complete all as specified and directed.
M&L brick work with sub class 'B' bricks straight or curved on plan to any radius, built in CM 1:4 as in half brick complete all as specified and directed.
Supply and fix sub class 'B' bricks of standard size for cable protection in trenches/ all as specified and directed.
M & L for use and waste of formwork to sides of concrete foundation, footing, bases of columns, raft & raft beams, sides and soffits (if any) of foundation and plinth beams; and similar works; in rough finished flat surface of concrete complete all as specified and directed.
M & L for use and waste of formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar works not exc. 200 mm thick horizontal or slopping in rough finished flat surface of concrete complete all as specified and directed.
M & L for use & waste of formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs etc. also splayes between floors and beams in rough finished flat surface of concrete complete all as specified and directed.
M & L for use and waste of formwork to sides of pillars, posts, struts, piers, columns and stanchions in square,rectangular orpolygonal , rough finished surface of concrete complete all as specified and directed.
S&F 30 mm thick flush door shutters solid core construction, with block board core and plywood face fanels, commercial type on both side and covered on both side with decorative face veneer with liping/frame to match complete all as specified and directed.
S&F 35 mm thick flush door shutters solid core construction, with MDF and plywood face panels, commercial type on both side and covered on both sides complete all as specified and directed.
S & F of 150 mm long Aluminium anodised barrel tower bolts, of extruded section complete all as specified and directed.
S & F of 125 mm long Aluminium anodised barrel tower bolts, of extruded section complete all as specified and directed.
S&F 300 mm long mild steel sliding door bolt, plate type, stove enameled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed complete all as specified and directed.
S&F 150 mm Aluminium handles cast type, anodised and fixed complete all as specified and directed.
S&F in repair 150 mm floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified and directed.
S&F rolled mild steel in plates, gusset plate (plain or chequered) channels square cut or notched (ordinary and counter sunk) forming holes, without any attachment conforming to Fe-410W (Gde-E-250) quality-A complete all as specified and directed.
S & F of roof trusses (framed), trussed, purlins, crane gantries, rails, fastening and heavy bracket framing (Beam, tee, angle, channel or flat sections), including distance pieces, cleats etc. confirming to Fe – 410 – W(Gde E - 250) quality 'A' complete all as specified and directed.
S & F of pressed steel frame of size 125 X 60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plates etc complete all as specified and directed.
S & F of Pressed steel frame of size 105 X 60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plates etc. and applying two coats of synthetic enamel paint over one coat of red oxide primer etc.complete all as specified and directed.
S & F of mild steel framed work such as grills, gratings etc. with ends of bars shouldered and / or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railing, frame work of water tanks and similar work conforming to Fe – 290 Gde E -- 165 complete all as specified and directed.
S & F of mild steel screw bolts (machine made) with hexagonal or square head at one end and screwed the other or screwed both ends, each screwed ends to be fitted with washer and one hexagonal or square nut, exc. 10 cm and not exc. 15 cm long and 11 to 15 mm dia of shank complete all as specified and directed.
M&L mild steel round bars 10 mm dia and over, cut to length, bent to shape required, including hooking ends for securing chain link fencing, conforming to IS Fe 410-W(Gde.E-250), quality-A, complete all as specified and directed.
M & L for mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed.
M & L for mild steel TMT bars but 6 to 8 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed.
M & L for mild steel TMT bars but 5 mm dia and over upto and including 10 mm dia in stirrups, spacers and binders and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed.
S & F of rolled mild steel sections as in framing of cladding, glazing, door or gates and the like fixed with angle cleats and connecting plates etc. confirming to Fe – 410 – W(Gde E - 250) quality 'A' complete all as specified and directed.
S & F of steel work as in tubular trusses including special shaped washers etc. complete using ERW or induction butt welded tubes conforming to IS – 1161 – 1979 grade St – 240 complete all as specified and directed.
S&F angle Iron fencing post, flat iron of mild steel also including drillling holes of grade FE 410 E-250 Quality A all as directed by Engr -in- charge.
Fixing only in repairs chain link fencing including line wires, any mesh, size and type of standards, rails, straining bolts, etc, and including provision of binding wire complete all as specified and directed.
S&F in repairs galvanised. 2 strand, steel barbed wire 2.24 mm dia barbed with 2 mm dia barbs at 75 mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc, (each line wire to be measured) and including dismantling the barbed wire complete all as as specified and directed
S & F Steel windows with side hung shutters including box type hinges with steel handle and steel peg stay, complete with glazing bars, dovetailed or welded complete all as specified and directed.
M&L powder coated Aluminium door, window, Cup board and ventilator shutter and frame any type (Sliding or openable ) with frame and other similar work, fabricated aluminium mesh etc. aluminium heavy section favricated incl all necessary roller wheels, cleats, handle, locking arrangement and arrangement to fix wire mesh with aluminium channel beading and stainless steel screw incl cost of rubber gasket ,beading roller wheel etc. ,complete all as specified and directed. Note: (a) The weight of rubber gasket beading, roller wheels, etc will not be measured with the weight of aluminium shutters as only aluminium items shall be measure. (b) Wire mesh shall be measured and paid separately. (c) Aluminium hinges shall be included in the unit rate
Supply only chain link MS galvanized fencing, of any size or type complete all as specified and directed.
S&F pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50 mm TCT (total coated thickness) of any colour having tensile strength of 550 Mpa as in roof covering cladding to wall etc, fixed with self tapping screws complete all as specified and directed.
S&F pre-painted galvalume aluminum zinc coating GI based plain steel sheet 0.50 mm TCT (total coated thickness) of any colour having tensile strength of 550 Mpa as in roof covering cladding to wall etc, fixed with self tapping screws complete all as specified and directed.
S&F 4 mm thick E- board designer /decorative ceiling (designer pattern) fixed or laid / inserted to and including aluminium framework with screws in false ceiling (flat or sloping) of grid size 605 x 605 mm and including anodised aluminium snap grid frame work for false ceiling hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified and directed.
M&L 18-20 mm thick granite slab(of any type) tiles machine cut, bedded jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding, polishing & over & including 15mm thick screed bed in CM 1:4, complete all as specified and directed.
M&L Bricks, sub class B,laid on edge, in drain old size brick bedded and jointed in cement mortar 1:6 and pointed in cement mortar 1:3 complete all as specified and directed
M&L in repairs pre polished cement concrete chequered tiles 300 x 300 x 25 mm thick with grey cement with or without pigment, set and jointed in neat cement slurry and pointed in coloured cement to match the surfaces as in floors laid over and including cement mortar screed bed or bedding layer 15mm thick in CM 1:4 complete all as specified and directed.
M&L Non Skid ceramic coloured tiles 7 to 8 mm thick (square / rectangular) area of each tile exc. 0.11 sqm but n. exc. 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including screed bed 20 mm thick in CM 1:6 complete all as specified and directed.
M&L coloured glazed ceramic tiles 350x250x7 / 450 x 350 x 7 mm thick as in dado / skirting and vertical surfaces, set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 10 mm thick screed bed in CM 1:3 complete all as specified and directed.
M&L 75 mm thick, PCC 1:3:6, type C-2 (using 40 mm graded crushed stone aggregate) as in sub base, floors, paths, plinth protection, hardstanding etc. finished even and smooth without using extra cement complete all as specified and directed.
M&L 75 mm thick, PCC 1:2:4, type B-1 (using 40 mm graded crushed stone aggregate) as in floors, sub base, paths, plinth protection, hardstanding etc. finished even and smooth without using extra cement complete all as specified and directed.
M&L 100 mm thick, PCC 1:4:8, type D-2 (using 40 mm graded crushed stone aggregate) as in sub base finished even and rough complete all as specified and directed.
M&L 75 mm thick, PCC 1:4:8, type D-2 (using 40 mm graded crushed stone aggregate) as in sub base finished even and rough complete all as specified and directed.
M&L 75 mm thick, PCC 1:3:6, type C-2 (using 40 mm graded crushed stone aggregate) as in plinth protection, sub base, floors, paths, hardstanding etc. finished even and smooth without using extra cement complete all as specified and directed.
M&L 25 mm thick PCC 1:2:4, type B-0 (using 12.5 mm graded crushed stone aggregate) laid above PCC sub floor / correction layer /under layer complete all as specified and directed.
Taking down cement plaster on brick or concrete surfaces / ceiling, racking out joints hacking for key scrubbing down with water etc complete all as specified and directed.
M&L for rendering 10 mm thick rendering in CM 1:3 on ceiling finished even and smooth without using extra cement acomplete all as specified and directed.
M & L for 15 mm thick rendering in cement mortar 1:6 on other than fair faces of brick work or concrete surfaces and finished the surface even and smooth without using extra cement complete all as specified and directed.
M & L for 15 mm thick rendering in cement mortar 1:4 on fair faces of brick work or stone masonry or on one side of lathing surfaces and finished the surface even and smooth without using extra cement complete all as specified and directed. Note:- WPC shall be measured and paid separately.
M&L for rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6 finished even and smooth with using extra cement complete all as specified and directed.
M&L for preparing newly plastered surfaces of wall and applying three coats of white wash complete all as specified and directed.
M&L for preparing newly plastered surfaces of ceiling and applying three coats of white wash complete all as specified and directed.
M & L for preparation of newly plastered or previously untreated surfaces of walls and applying two coats of oil bound distemper over a coat of primer and over a thin layer of wall care putty to obtain smooth finish complete all as specified and directed.
M & L for preparing newly plastered walls surfaces and applying two coats of cement base paint over a coat of primer complete all as specified and directed.
BLANK
M & L for preparing newly plastered walls surfaces and applying two coats of cement base paint complete all as specified and directed.
S & F Sheet glass 3.0 mm thick, ordinary quality and glazing with oil putty or wooden beads not exceeding 0.5 Sqm in each pane glazed with putty or fixed with beads complete all as specified and directed.
S&F 4.8mm thick glass including tinted/dark film n exc 0.5 sqm each pane complete fixed to aluminium frame work including rubber beading complete all as specified and directed.
M&L preparation of old painted wooden surfaces of any description, over 10 cm in width or girth, not otherwise described and including applying one coat of synthetic enamel paint complete all as specified and directed.
M&L preparation of new wooden surfaces of any description, not otherwise described over 10 cm width or girth and including applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.
M&L preparation of new steel surfaces of any description, not otherwise described over 10 cm width or girth and including applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.
M&L for preparation of old painted steel surfaces of any description, over 10 cm width or girth, not otherwise described and applying one coat of synthetic enamel paint complete all as specified and directed.
Supply and fixing GI tubing light grade 15 mm dia for protection pipe for fixing along the pole with necessary clamps, nut bolt washers and including taking down old unserviceable ones complete all as specified and directed.
S&F 15 mm bore galvanised steel water tubing medium grade and including necessary GI fitting (such as bends, elbows, tees etc. and fixed to wall / ceiling or laid in / on floor complete all as specified and directed.
S&F 20 mm bore galvanised steel water tubing medium grade and including necessary GI fitting (such as bends, elbows, tees etc. and fixed to wall / ceiling or laid in / on floor complete all as specified and directed.
Cutting chases, pinning in, making good to facing where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, lintels, shelves etc, and cutting chases for concealed water tubing or concealed conduit wiring etc, and making good on brick walls, cutting n.exc. 10 cm in girth complete all as specified and directed.
S&F wash down water closet pan (pedestal pattern) white in colour, vitreous chinaware with fixing bolts and flush pipe, connection to trap and to flushing cistern and all joints, including plastic water closet seat cover white, closed pattern with flat bottom and cover and mild steel CP or aluminium anodised hinged device complete all as specified and directed.
S&F PVC low level flushing cistern of 10 litres capacity, valve less, syphonic action type, white body, with inlet ball valve, float and handle including brackets complete all as specified and directed.
S&F vitreous china wash hand basin white flat back of size not less than 550 x 400 mm with and including PVC waste pipe 32 mm bore, CP waste fitting and cutting for and pinning in ends of brackets etc, complete all as specified and directed.
S & F 15 mm bore bib tap, fancy type chromium plated , cast copper alloy, with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed. Make: Jaquar/ Cera
S&F 15 mm bore pillar tap ,fancy type chromium plated, cast copper alloy, with capstan head, screwed down high pressure, with or without lettered “hot" or “cold” with long screwed shanks and fly nuts, screwed for iron pipe complete all as specified and directed.
S&F health faucet 15 mm bore, ABS chromium plated with & including 1.0 mtr chromium plated flexible tube & wall hook complete all as specified and directed.
S&F angle stop cock 15 mm bore, cast copper alloy, screwed down high pressure, with crutch of butterfly handle, screwed both ends for iron pipe or unions and fixed, fancy type, concealed type, chromium plated long thread with flange complete all as specified and directed. Make: Jaquar/ Cera
S & F 15 mm bore Stop valve, Fancy type chromium plated with long shank and cup (Concealed type) , cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions complete all as specified and directed.
S & F for corner glass shelf assembly consisting of 5.5mm thick sheet glass shelf 25cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed.
S&F in repair towel rail 20 mm dia & 600 mm long of chromium plated fixed with and including chromium plated brass screws and wooden / plastic cleat complete all as specified and directed.
S&F soap dish with metal dish of chromium plated fixed with and including chromium plated screws and wooden / plastic cleat complete all as specified and directed.
S & F of 75 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints fixed to walls/ floors complete all as specified and directed.
S & F of 110 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints fixed to walls/ floors complete all as specified and directed.
S&F 75 mm bore PVC (SWR) floor trap, plain with grating and including jointing with solvent cement complete all as specified and directed.
S&F PVC (SWR) 75 mm bore bend, of any radius complete all as specified and directed.
S&F PVC (SWR) 110 mm bore bend, of any radius complete all as specified and directed.
S&F 110 mm bore PVC (SWR) vent cowl complete all as specified and directed.
S&F 75mm bore PVC (SWR) vent cowl complete all as specified and directed.
M & L 150 mm dia Salt Glazed stone ware drain pipes laid in trenches and jointed in CM 1:1 complete all as specified and directed.
M & L for PCC 1:4:8 type D2 (using 40 mm graded stone aggregate) in concrete bed to drain pipes including packing under and haunching against the sides of pipes after they are laid and tested for pipes of 150 mm bore pipe and including taking down old pipes complete all as specified and directed.
S&F in repairs vitreous china urinal half stall type, of size not less than 375 x 390 x 590 mm, white including chromium plated urinal spreader & waste coupling complete all as specified and directed.
Cutting into existing manholes for connecting new drains making good to pipe and rendering cutting out existing benching for and forming branch channel (1/2 round or 3/4 round section) in cement concrete 1:2:4 type B1, smooth finished and reforming benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-l smooth finished, and reforming benching as required for 150 mm internal dia of pipe complete all as specified and directed.
S&F 75mm dia stainless steel gratings, doom type, chromium plated, with or without waste hole, fixed to floor trap complete all as specified and as directed.
Supply and fixing GI tubing light grade 40 mm dia for protection pipe for fixing along the pole with necessary clamps, nut bolt washers and including taking down old unserviceable ones complete all as specified and directed.
S&F rotational moulded polyethylene water storage tanks of 1000 Litres capacity, triple layered (cylindrical vertical with closed top) hoisted and fixed in position and including 20 mm dia nipple suitable for HDPE water tank (minimum weight 45 gm), 20 mm bore ball valves (minimum weight 210 gm) high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed to 20 mm bore pipe & locking with GI wire (to prevent monkey menace) to tank complete all as specified and directed.
S&F 15 mm bore ball valves high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed (minimum weight 210 grams) complete all as specified and directed.
Dismantling post or struts (wood, steel or RCC) any section, including taking out embedded portion in natural ground and making good the disturbed ground complete all as specified and directed.
M&L in replacement point wiring with 1.5 sqmm single core, PVC insulated, unsheathed FRLSH copper cable, 1100 volts grade, with multi stranded copper conductor drawn through and including non-metallic, rigid non mettalic PVC conduit (medium grade) concealed in wall / ceiling with and including 1.5 sqmm single core PVC insulated, multistranded, unsheathed, FRLSH copper conductor cable as continuous earth continuity conductor (green in colour) with cast Iron / pressed steel terminal boxes 60 mm deep, on walls with 3 mm thick plastic laminated / hylam sheet cover, fixed on wall / other surfaces with brass screws for mounting or housing switches, socket outlets, fan regulators, etc. including all other fixing accessories for one light / fan / exhaust fan / call bell point controlled by one 5 / 6 Amps switch and including cutting chasing (as required) and making good the disturbed surfaces including finishes to match with adjacent surfaces complete all as specified and directed. Note: (i) Making good to match with the adjoining surface shall be included in the unit rate. (ii) Cutting chases shall be included in the unit area.
All as per Sl. item No. 121.00 above but for one 5 / 6 Amps socket outlet point on independent board.
All as per Sl. item No. 121.00 above but for one 5 / 6 Amps socket outlet point on same board.
All as per Sl. item No. 121.00 above but for one 16 Amps socket outlet point on independent board with 2.5 sqmm cable and 2.5 sqmm earth wire
M & L concealed sub main wiring with 2 runs of 2.5 sqmm main wire along with 1 run of 2.5 sqmm earth wire (green in colour) single core FRLSH PVC insulated, unsheathed, multi-stranded, 1100 volts grade ISI marked copper conductor cable, drawn through and including adequate size rigid non-metallic PVC conduit (medium grade) with all fittings & accessories including cutting chases for conduits as required, sinking for terminal boxes, making good the disturbed surfaces including finishes to match with adjacent surfaces & taking down complete all as specified and directed. NOTE:- Two runs of main copper conductor, one run of earth wire and one run of PVC conduit shall be measured as one unit length. Make of cable:- Havells /Mescab/ Polycab / Finolex Make of PVC Conduit:- Richa Cables / AKG Industries / Harsh Electro Systems / Panasonic (Anchor)
S & F Modular type switch piano 6 Amps single pole one way one module all as specified and as directed.
S & F Modular type switch piano 16 Amps single pole one way one module for 16A independent complete all as specified and as directed.
S & F modular type Socket outlet 6 Amps 2/3 pin combined 2 module complete all as specified and as directed.
S & F modular type Socket outlet 16 Amps-2/3 pin combined 2 module complete all as specified and as directed.
S&F ceiling rose, surface bakelite 65 x 50 mm three terminal complete all as specified and directed.
S&F in replacement LED light fitting 1 x 10 watt , 220 Volts AC pvc box type with driver , holder including LED tubelight , extruded aluminium housing, with luminous efficacy, 100 lumen / watt (minimum), suitable for surface mounting, with integrated high effeciency driver etc. all electrical accessories, pre-wired upto terminal block, fixed with 02 Nos of PVC round / square blocks, screws etc. inlcuding electrically connecting complete all as specified and directed.
S&F in replacement LED light fitting 1 x 20 watt , 220 Volts AC pvc box type with driver , holder including LED tubelight , extruded aluminium housing, with luminous efficacy, 100 lumen / watt (minimum), suitable for surface mounting, with integrated high effeciency driver etc. all electrical accessories, pre-wired upto terminal block, fixed with 02 Nos of PVC round / square blocks, screws etc. inlcuding electrically connecting complete all as specified and directed.
S&F 15 watt LED Bulk head fitting including electronic driver and SMD LED lamp, polycarbonate housing & opal polycarbonate diffuser, Lumen Efficacy 100 Lm/Watt (minimum), colour temperature 5700K (minimum), CRI 80 (minimum), IP-65, PF 0.95 (minimum), THD 10% (maximum), in-built surge protection 5 KV (minimum) including electrically connecting from celing rose to light fitting complete all as specified and directed.
S&F in replacement (including taking down MCB/Isolator) MCB DB, SPN 8 way, IP-43, IK 09, double door type with metal door, with 200A copper neutral and earth bus bar for fixing MCB, fixing flush to wall & making good the disturbed surfaces complete all as specified and as directed.
S&F MCB SPN 40 Amps 240V ,50 Hz ,breaking capacity 10 KA," C " series, complete all as specified and directed.
S&F MCB SP,10KA, 230V, C-curve, 6-32 amps complete all as specified and directed.
S&F Metal Plug Socket DB with sheet metal enclosures with two pin and earth plug and socket one double pole MCB 20 Amps,240V for Geysor connenction complete all as specified and directed.
S&F exhaust fan 250 mm sweep, non metallic body, 1200 RPM (minimum), AC single phase, 230 V, 50Hz with bird guard, nuts, screws, bolts including electrical connection, writing MES number in 2 cm height with synthetic enamel paint and cutting wall for making hole and making good the disturbed surface to match the existing surface complete all as specified and directed.
S&F geyser of 2KW of capacity 25 Litres, 230V, 50Hz, vertical, wall mounted type, BEE 5 star rated, steel outer body and steel inner tank with, incoloy glass coated heating element, adjustable thermostat for temperature regulation, multifunctional safety valve with & including 3 core copper cable of 1 to 2 metre length with 3-pin plug of 16A capacity, fixing arrangement such as. bracket, nuts, bolts washers etc. complete all as specified and directed. Make:- V-Guard / Bajaj / Usha / Crompton Greaves / Jaquar & Company Pvt. Ltd.
M&L PVC Insulated Weather proof multicore FRLS PVC sheathed multistranded cables with bright annealed copper conductor of size 1.5 sqmm 3 core for connection of light to pole box including taking down old unserviceable ones completed all as specified and directed.
Supply, laying testing and commissoning in repair of LT cable XLPE insulated with FRLS loading factor on inner and outer sheath of Extruded PVC and wire armoured electric power cables (hevy duty) with aluminium conductor 1100 volts grade of size 10 sqmm 4 core with including taking down old unsv ones complete all as specified and directed.
M&L preparation of 9 m long old steel poles with connected cross arms, cable protection pipes, clamps, street light brackets etc, and including applying one coat of aluminium paint on complete height of the pole and applying one coat of synthetic enamel paint upto 0.80 m height from the top of coping with multi colour strips as per the colour code complete all as specified and directed.
M&L preparation of 11 m long old steel poles with connected cross arms, cable protection pipes, clamps, street light brackets etc, and including applying one coat of aluminium paint on complete height of the pole and applying one coat of synthetic enamel paint upto 0.80 m height from the top of coping with multi colour strips as per the colour code complete all as specified and directed.
M&L preparation of 8 m long old RCC / PSC pole with connected cross arms, cable protection pipes, clamps, street light brackets etc, and including applying one coat of weather coat paint exterior emulsion paint on complete height of the pole and applying one coat of synthetic enamel paint upto 0.80 m height from the top of coping with multi colour strips as per the colour code complete all as specified and directed.
M&L preparation of old steel 2 Pole Structure poles with connected cross arms, cable protection pipes, clamps, street light brackets etc, and including applying one coat of aluminium paint on complete height of the pole and applying one coat of synthetic enamel paint upto 0.80 m height from the top of coping with multi colour strips as per the colour code complete all as specified and directed.
M&L preparation of old steel 4 Pole Structure poles with connected cross arms, cable protection pipes, clamps, street light brackets etc, and including applying one coat of aluminium paint on complete height of the pole and applying one coat of synthetic enamel paint upto 0.80 m height from the top of coping with multi colour strips as per the colour code complete all as specified and directed.
S&F in repair LED street light 70 watt made up of pressure die cast aluminium housing environment friendly with high efficiency LED as lighting source and lens embedded PC cover having TOP Opening seperate driver compartment with IP66 protection and impact resistance of IK07. System Lumen Efficasy ≥120 Lm/W, 10 kV Surge Voltage Protection, Operating Voltage range 140 V - 270 V, Make of LED - Cree/Nichia/Osram/Agilent/Lumileds etc and including fixing arrangement made out of 40 mm bore GI pipe light grade of length not less than 1.2 m, bent to shape, fixed with two pairs of 40 x 5 mm MS flat iron clamps, nuts, bolts & washers to fix the fitting with pole complete all as specified and directed. Note :Contractor have to submit LM 79 and LM 80 report from NABL accredited Lab,Test Certificate and other relevant documents as directed by Engr-inCharge before approval of product. Note: 1.Contractor have to submit LM 79 and LM 80 report from NABL accredited Lab,Test Certificate and other relevant documents as directed by Engr-inCharge before approval of product. 2. Cost of taking down old unserviceable fittings is deemed to be included in unit quoted rates. Make :- Havells/ Crompton/Philips
S&F in repair LED street light 90 watt made up of pressure die cast aluminium housing environment friendly with high efficiency LED as lighting source and lens embedded PC cover having TOP Opening seperate driver compartment with IP66 protection and impact resistance of IK07. System Lumen Efficasy ≥120 Lm/W, 10 kV Surge Voltage Protection, Operating Voltage range 140 V - 270 V Make of LED - Cree/Nichia/Osram/Agilent/Lumileds and including fixing arrangement made out of 40 mm bore GI pipe light grade of length not less than 1.2 m, bent to shape, fixed with two pairs of 40 x 5 mm MS flat iron clamps, nuts, bolts & washers to fix the fitting with pole complete all as specified and directed. Note : 1.Contractor have to submit LM 79 and LM 80 report from NABL accredited Lab,Test Certificate and other relevant documents as directed by Engr-inCharge before approval of product. 2. Cost of taking down old unsv fittings is deemed to be included in unit quoted rates.. Make :- Havells/ Crompton/ Philips
S&F in repair Energy saving, environmental friendly, long life, exclusive innovative die-cast aluminium LED Flood Light 120 watt, Tempered protective toughened glass with IP66, and impact resistant with IK07, System Lumen Efficasy ≥120 Lm/W, 10 kV Surge Voltage Protection, , Operating Voltage range 140 V - 270 V including fixing arrangement fixed with two pairs of 40 x 5 mm MS flat iron clamps, nuts, bolts & washers to fix the fitting with pole complete all as specified and directed. Note: 1.Contractor have to submit LM 79 and LM 80 report from NABL accredited Lab,Test Certificate and other relevant documents as directed by Engr-inCharge before approval of product. 2. Cost of taking down old unsv fittings is deemed to be included in unit quoted rates. Make :- Havells/ Crompton/Philips
S&F Solar all in one system 20 W Smart Integrated Solar Street Light with Built in Mono Crystalline Panel, Lithium Ferro Phospate (LiFeP0 4 ) 12.8V 24Ah Battery, MPPT Charge Controller and PIR Sensor with Colour Temperature 6000-6500K Suitable LED efficacy to have system efficacy of not less than 125 Lumen/Watt and Life of LED light fitting Not less than 50000 burning hours including fixing accessories like clamps of suitable size at existing pole and dismentaling out old unsv ones complete all as specified and as directed. Note: 1.Contractor have to submit LM 79 and LM 80 report from NABL accredited Lab,Test Certificate and other relevant documents as directed by Engr-inCharge before approval of product. 2. Contractor will undertaking about warranty certificate of 50000 hr burning life. 3. Cost of taking down old unsv fittings is deemed to be included in unit quoted rates. Make:- Havells / Crompton/ Philips
S&F Solar all in one system 30 W Smart Integrated Solar Street Light with Built in Mono Crystalline Panel, Lithium Ferro Phospate (LiFeP0 4 ) 12.8V 24Ah Battery, MPPT Charge Controller and PIR Sensor with Colour Temperature 6000-6500K Suitable LED efficacy to have system efficacy of not less than 125 Lumen/Watt and Life of LED light fitting Not less than 50000 burning hours including fixing accessories like clamps of suitable size at existing pole and dismentaling out old unsv ones complete all as specified and directed. Make:- Havells / Crompton/ Philips Note: 1.Contractor have to submit LM 79 and LM 80 report from NABL accredited Lab,Test Certificate and other relevant documents as directed by Engr-inCharge before approval of product. 2. Contractor will undertaking about warranty certificate of 50000 hr burning life. 3. Cost of taking down old unsv fittings is deemed to be included in unit quoted rates.
Supply, installation, testing and commissioning of street light panel suitable for 3 ph, 440 V supply, maxm load 6 KW, digital 24 Hr timer, 32 A TP contactor, 40A TPN MCB rating including electric connection for outdoor operation complete all as specified and directed. Cat No. IHXTS03060 of Make Havells or equivalent of L&T/ABB.
Supply only LED type Phase indicating lamps( Red, Orange,Blue) have to be fitted in existing LT Panel complete all as specified and directed. Make: AE / L&T
Supply only CTs (Accuracy class 1.0 ,CT Ratio-200/5 ,Burden-15VA, 3 phase) have to be fitted in existing LT Panel complete all as specified and directed. Make: AE / L&T
Supply, installation, testing and commissining in repair of MCCB 400A, with spreader terminals , 36KA 4 pole Ics =100%Icu with thermal megnetik protection unit of suitable size have to be fitted in existing LT Panel including taking down of old unserviceable one complete all as specified and directed. Make Legrend /L&T
Supply, installation, testing and commissining in repair of MCCB 250A, with spreader terminals , 36KA 4 pole Ics =100%Icu with thermal megnetik protection unit of suitable size have to be fitted in existing LT Panel complete including old unserviceable one complete all as specified and directed. Make Legrend /L&T
Supply, installation, testing and commissining in repair of MCCB 200A with spreader terminals , 36KA 4 pole Ics =100%Icu with thermal megnetik protection unit of suitable size have to be fitted in existing LT Panel complete including old unsv one complete all as specified and directed. Make Legrend /L&T
Supply, installation, testing and commissining in repair of MCCB 160 A with spreader terminals , 36KA 4 pole Ics =100%Icu with thermal megnetik protection unit of suitable size have to be fitted in existing LT Panel complete including old unserviceable one complete all as specified and directed. Make Legrend /L&T
M&L in replacement for street light junction box with 2mm thick CRCA sheet powder coated, of size (Width X Depth X Height) (8'' X6" X 10"), with rain shed all side except back side, internaly fitted 04 Nos 20mm copper bus bar suitable length with necessary color coad and holes and nut bolts, fitted with necessary insulators, necessary cable entry/exit holes upto 35 sqmm cable at bottom and fixing and connection with necessary clamps etc complete all as specified and directed by Engr - in- Charge. Make- L&T/ Hager/ Hensel
M & L for fabrication , installation, connection and testing of Glow sign LED 3D board of size as per site requirement not exceeding 3.53 Sqmtr, alumiminium composite sheet boxand frame made out with MS pipe, 3 mm thick acrylic sheet and 3D letters comprises of inside modular light, back side of board having cover of 26 gauge GI sheet complete with acrylic raise alongwith LED Pasted on ACP rectangular shape along with fixing arragement on wall / Entry Gate or infront of MES Installation with the help of nut and bolts or frame and stand for fixing at a height of 3 ft from GL made with the help of angle iron along with necessary PCC work for fixing as required at site, also necessary electrical connection with copper conductor cable has to be provided from near by electrical point complete all as specified and directed by Engr - in- Charge. Note 1: Approval for size and design of sign board shall be taken by contractor from Engr-in-Charge at the time of execution. Note 2: Cost of fixing arrangement and electrical connection are deemed to be included in coated rate. Note 3: Sample of board have to be submitted by contractor before approval of GE and cost of sample board deemed to be included in quoted rate.
M &L of Earthing with galvanised iron earth plate electrode 600 mm x 600 mm x 6 mm thick, buried directly and preferably vertically in ground, earth pit not less than 2.25 Mtr deep below ground level with top edge of the plate not less than 1.5 Mtr below ground level connected using galvanised wire 4 Sq mm as earthing electrode by means of nuts, bolts, check nuts and washers made of galvanised iron or steel earthing lead to be protected by galvanised iron pipe (medium grade) and other end connected to earthing test point as directed including providing funnel with 20mm bore galvanised iron pipe (light grade), wire mesh, charcoal or coke and common salt in alternate layer of 15cm (compacted thickness) all round the earth electrode, concrete earth pit in PCC (1:3:6) type C-1 (with 20mm graded aggregate), 50mm thick precast RCC (1:2:4) cover slab (re-inforced with 8mm dia TMT bar @ 15 cm C/C both ways and suitable handle made of 10mm dia) including necessary earth work in excavation, returning filling and removal of surplus earth up to a distance not exceeding 50 Mtr etc all as shown on electrical plate No. 5 of MES Schedule Part-I complete including testing on completion. On testing after completion if the desired earth resistance is not obtained the earthing will be made again by the contractor at no additional cost.
M&L earthing complete with galvanised steel earth plate electrode of size 600 x 600 x 6 mm thick buried directly in ground in vertical position (earth pit not less than 2.25 m deep below the normal ground level) with top edge of the earth plate not less than 1.5 m below normal ground level, connected to galvanised earth lead of GI strip 32x6 mm by means of bolts, nuts, check nuts and washers of galvanised iron or steel, all as shown in electrical plate No. 3 connected to earthing test point and including dismantling complete all as specified and directed. Note:- The unit rate shall also include for earth work in any type of soil, PCC 1:3:6 type C1 chamber, RCC 1:1.5:3, type A1 cover slab, 50 mm thick reinforced with 8 mm dia TMT bar @ 140 mm C/C both ways, 10 mm dia plain bar lifting handle embedded in cover slab, 20 mm bore medium grade GI watering pipe, 40 mm bore GI medium grade earth lead protection pipe, funnel, wire mesh, copper lugs, charcoal and common salt in alternate layer etc.
Supply and fixing GI strip 32x6 mm with necessary nut and bolt etc for connection with existing Earting pit and electrical equipment including taking down old unsv one complete all as specified and directed by Engr-in-Charge.
R N SAH N CO
MS ORIENT ENGINEERING WORKS
R K UDYOG
GEETA CONSTRUCTION
M/s TALCO
VICKY ENTERPRISES
M/s TRIMURTI ASSOCIATE
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .