CONSTRUCTION OF OFFICERS INSTITUTE AT VAYUSENA NAGAR, NAGPUR

Amount

Blank

Blank

Blank

Blank

Blank

Blank

Blank

Blank

SCH 'A' PART XI (MISC B/R & E/M ITEMS) Note:- Excavation and earthwork to the extent required for execution of relevant item under this schedule unless otherwise specified shall be measured and paid under relevant items of Schedule 'A' Part-X.

ELECTRIFICATION

Supply and fixing LED spot/focus light fitting 3000 K long life with minimum 25000 burning hours with CRI>80, beam angle 36 deg and vertical tilt 30 deg, 18 Watt fixed on wall complete all as specified and as directed.

Supply and fixing LED light fitting, high performance, low height back lit downlighter PDC aluminium housing, long life 18 watt, 3000 K, fixed on wall complete all as specified and as directed.

Supply and fixing ceiling fan energy efficient 5 star rating, 1200 mm sweep 240 volts 50 Hz AC supply and connecting up complete including provision of flexible cord 3 core and including multi stranded copper conductor cable of size 0.5 Sqmm from connector block to fan including connecting to earthing point and ceiling rose complete all as specified and as directed.

Supply and fixing Exhaust heavy duty, PVC body with louver 300 mm sweep, 900 RPM SP, 240 V, 50 z complete with all accessories internally prewired and including connecting up with 3 core 0.5 Sqmm PVC insulated multi stranded copper conductor cable to connect exhaust fan to ceiling rose including making holes, routing bolts finishing etc. complete all as specified and as directed.

Supply and fixing wall mounted LED batten 20 watt, 2000 lm in a compact batten, decorative mushroom profile LED lighting fixture with extruded aluminium channel, environmemental friendly, energy efficient & integrated electronic driver 230 Volt, AC, single phase, 50 Hz including all accessories prewired including making necessary electrical connection between ceiling rose and fitting with PVC insulated, multistranded copper conductor of size 0.5 Sqmm 3 core and fitting fixed on 2 Nos PVC blocks of size 4"x 4" complete all as specified and as directed.

Supply and fixing wall mounted LED batten 10 watt LED 6500K, size 2 feet long extruded aluminium heat sink provided for efficient heat dissipation & integrated electronic driver 230 Volt, including all accessories prewired including making necessary electrical connection between ceiling rose and fitting with PVC insulated, multistranded copper conductor of size 0.5 Sqmm 3 core and fitting fixed on 2 Nos PVC blocks of size 4"x 4" complete all as specified and as directed.

Supply and fixing surface mounted LED light fitting of capacity 36 watt, environmental friendly high energy efficient with electronic driver suitable for working on 240 volts, 50 Hz AC supply, with IP rating IP-20, system efficacy 110 lm / watt, housing made out from metallic CRCA powder coated, cover with high efficiency diffuser, power factor 0.95 complete with 0.5 Sqmm PVC insulated multistranded copper wire cable 3core to be connected with the ceiling rose complete with hanging / fixing arrangements with all accessories all as specified and as directed.

Supply and fixing LED building security light of 25 watts type, single phase, 230 volts, IP-66 protection, cool white complete, fixing to building walls with the help of GI pipe bracket made out of light grade GI pipe of 25 mm dia 1.5 meters long complete with MS flat iron clamp, nuts, bolts etc. complete all as specified and as directed. Note:- GI bracket of suitable dia and size shall be deemed to be included in quoted rate.

Supply and fixing sheet metal enclosure for double door DB 415 volts TPN 4 way for incorporating incoming and outgoing MCBs as per IS, IP-43 protection with 200A rated bus bar including compact insulated bus bar and rounded neutral bar, door earthing complete all as specified and as directed.

Supply and fixing MCB TPN 63 Amps, breaking capacity 16 KA, 415 volts including making connection complete all as specified and as directed.

Supply and fixing MCB SPN 6 to 32 Amps breaking capacity 10 KA, single phase 240 volts including making connection complete all as specified and as directed.

Supply and fixing MCB SP 6 to 32 Amps breaking capacity 10 KA, single phase 240 volts including making connection complete all as specified and as directed.

Supply, installation, testing & commissioning of LT electric control panel cubical type for outdoor use floor mounted made out of CRCA outer sheet of 3.15 mm thick and inner sheet of 2mm thick and angle iron legs of size 50 x 50 x 5mm having front and rear open hinged doors with front openable shutters for each MCCB with spreader with fully enclosed bus bar chamber, having insulated bus bar made out of aluminium strips of rating 400 amps for 3 phase, 415 volts, 50 C/S, 4 wire system, with cable entry provision, with suitable lugs gland, voltmeter, ammeter, CTs and phase indicator complete, duly painted with two coats of stove enamelled powder coated paint over a coat of red oxide primer complete and nuts, bolts, washers for connection of cable, including necessary PCC work of height 45 cm from ground level and white washing to the platform all as specified and equipped with the following items complete all as specified and as directed :-

Supply, installation, testing and commissioning of MCCB 160 Amps 25 KA, 4 Pole, thermal magnetic release Ics=100% Icu complete all as specified and as directed.

Supply and fixing bracket for street light fittings made out of 40 mm dia GI pipe of light grade 1.5 m long, bent to shape & size required & fixed to pole with and including flat iron clamps 02 Nos made out of 32 x 6 mm flat iron including GI Nuts, bolts and washers and painting of clamps and street light brackets with one coat of aluminium paint over a coat of red oxide primer complete all as specified and as directed.

Supply and fixing FRP Looping box of size 250 x 200 x 105 mm and comprising with one MCB SP 5 Amps, 10 KA, 240 volts AC and one No 4 way brass connector complete and fixing on pole with the help of MS Clamps made out of MS flat iron of size 50 x 5 mm thick with suitable size of nuts, bolts and washers complete all as specified and as directed.

Supply and fixing LED street light fitting of capacity 45 watts, working on 240 volts, 50 Hz AC supply with lumen efficacy of LED > 140 LM/W, powered by electronic driver built in potted LED driver (SMPS based constant current supply) with lower THD </= 10%, PF>/= 0.95, output open / short circuit protection, phase to phase protection , over voltage protection, surge voltage protection up to 10 KV with SPD and other safety test as per IS-15885 Part-2/sec13, CISPR15 with high efficiency polycarbonate UV stabilized cover with integrated lens to ensure Asymmetrical between light distribution & housing made out from pressure die-cast aluminium alloy for housing (heat shrink) for effective thermal compartment with IP66 protection complet all as specified and as directed.

Supply and fixing pathway LED light 6 watt die cast aluminium housing silver grey floor / wall recess mounted outdoor use, colour warm white, Input voltage AC 140V-265V, PF>/= 0.9, Power consumption 6W +/- 5% Rated Frequency 50 Hz, luminus flux > 400 Lm, LED light source- SMD, Beam Angle - 60 deg colour rendering index (CRI) >/= 80, colour tempreture - 3000K (WW), working temperature - 0⁰C to 50⁰C, rated life > 50,000 hrs, IP rating -IP65, Surge protection upto 3 KV complete all as specified and as directed.

Supply, installation, testing and commissioning of integral LED Ground mounted Bollard 10 W, Inverted pyramid tripod LED bollard with soft 360 degree light with a system lumen output of 300 lumens and minimum system efficency of 35 lm/W, rated system lifetime of 25,000 burning hours at L70, colour tempreture of 3000K and CRI>75, IP65 protection & IK10 rating with THD < 20% and PF>0.9, luminaire housing made of pressure die cast aluminium with polycarbonate diffuser, power consumption not to exceed 10W (including driver) complete all as specified and as directed.

Supply and fixing of Automatic street light control switch using infrared sensor based NATURE SWITCH for automatic switching of street light, Three phase load of 5 KW (Swadeep- 02EC5kW3P) with 1 Nos 3 pole contactor with NO & NC auxiliary contact, Incoming MCB TPN of capacity 25 Amps, 1 Nos outgoing MCB TPN of capacity 25 Amps, circuit wiring (Copper) of 10 Sqmm Nature switch operation to be based on Nature light Lux level (required luminaire level for switching OFF less than 10 Lux), sensor to also have part night operation facility of min 4 hrs to max 12 hrs, sensor alongwith suitable SMC enclosure confirming to IP 66 and the circuit also have provision for manual operation i.e. sensor by pass option setting features complete all as specified and as directed.

Material and labour for sub main wiring with 4 x 4.0 Sqmm + 2 x 4.0 Sqmm (Nominal area) using single core PVC insulated unsheathed multi stranded copper conductor FRLS cable by drawing into concealed PVC conduit not less than of 32 mm dia and including non metalic heavy grade rigid PVC conduit accessories, ISI marked, as per site requirement with all fitting such as tee, bends, reducer, elbow, bell mouth, tube ends and all fixing accessories such as couplers, lock nuts, saddles, pipe hooks etc. fixed properly as in concealed position on wall/floor/ceiling position on ceiling / roof/ trusses including cutting chases & making good to disturbed surfaces & matching with the existing colour of wall/floor etc., conduit including PVC insulated multi stranded copper conductor FRLS cable as continuous earth wire complete all as specified and as directed. Note:- 6 Runs of 4 Sqmm, single core PVC insulated FRLS multistranded copper conductor cable & 1 Run of PVC conduit shall be measured as single unit.

Material and labour for sub main wiring with 2 x 4.0 Sqmm + 1 x 4.0 Sqmm (Nominal area) using single core PVC insulated unsheathed multi stranded copper conductor FRLS cable by drawing into concealed PVC conduit not less than of 25 mm dia and including non metalic heavy grade rigid PVC conduit accessories, ISI marked, as per site requirement with all fitting such as tee, bends, reducer, elbow, bell mouth, tube ends and all fixing accessories such as couplers, lock nuts, saddles, pipe hooks etc. fixed properly as in concealed position on wall/floor/ceiling position on ceiling / roof/ trusses including cutting chases & making good to disturbed surfaces & matching with the existing colour of wall/floor etc., conduit including PVC insulated multi stranded copper conductor FRLS cable as continuous earth wire complete all as specified and as directed. Note:- 3 Runs of 4 Sqmm, single core PVC insulated FRLS multistranded copper conductor cable & 1 Run of PVC conduit shall be measured as single unit.

Material and labour for sub main wiring with 4 x 6.0 Sqmm + 2 x 6.0 Sqmm (Nominal area) using single core PVC insulated unsheathed multi stranded copper conductor FRLS cable by drawing into concealed PVC conduit not less than of 40 mm dia and including non metalic heavy grade rigid PVC conduit accessories, ISI marked, as per site requirement with all fitting such as tee, bends, reducer, elbow, bell mouth, tube ends and all fixing accessories such as couplers, lock nuts, saddles, pipe hooks etc. fixed properly as in concealed position on wall/floor/ceiling position on ceiling / roof/ trusses including cutting chases & making good to disturbed surfaces & matching with the existing colour of wall/floor etc., conduit including PVC insulated multi stranded copper conductor FRLS cable as continuous earth wire complete all as specified and as directed. Note:- 6 Runs of 6 Sqmm, single core PVC insulated FRLS multistranded copper conductor cable & 1 Run of PVC conduit shall be measured as single unit.

EXTERNAL SEWAGE DISPOSAL

Material and labour for construction of RCC Septic tank designed to carry sewage and sullage water, excavation in any type of soil, PCC 1:4:8 below foundation, RCC M-30 design mix in walls, base slab, baffle wall and roof slab including beams etc. with vent shaft, manhole openings with cover connection etc., complete with effective depth of 1.5 meter and overall depth of 3 meter for 50 users complete all as specified and as directed.

Material and labour for construction of SOAKAGE WELL 2.4 m dia x 3.0 m effective depth, excavation in any type of soil, foundation in PCC 1:3:6 type C2, walls of honey combed brick masonary with top ring of M-25 concrete including intercepting chamber and screen chamber made of brick masonary in CM 1:4, RCC cover slab in RCC M-25 (Desin Mix), SFRC cover, interconnecting pipes of RCC/DWC, soakage well filled with brick bats complete all as specified and as directed.

EXTERNAL WATER SUPPLY AND RAW WATER SUPPLY

Material and labour for cutting existing GI/MS pipes 100/80 mm dia for insertion of new Tee 100X100X50 mm including Tee, for taking out branch connection including neccessary earth work, dewatering of water from trenches, jointing of Tee & other connected items complete all as specified and as directed.

Material and labour for cutting existing GI/MS pipes 100/80 mm dia for insertion of new Tee 100X100X80 mm including Tee, for taking out branch connection including neccessary earth work, dewatering of water from trenches, jointing of Tee & other connected items complete all as specified and as directed.

Material and labour for construction of valve pit chamber of internal dimension 90cm x 90cm x 90cm with sub class 'B' bricks in CM (1:4) with 15mm thick plastering in CM (1:4) inside the chamber and on the external portion exposed above ground level, PCC (1:4:8) type D2, 10cm thick for foundation, including 4mm thick MS cover welded around with MS flat iron of size 40mm x 6mm including MS angle iron frame of size 40 mm x 40mm x 6mm fixed in PCC 1:2:4 type B1 coping with 25x6mm flat iron holdfasts, hinges, handle, locking arrangement including painting with two coats of synthetic enamel paint over a coat of red oxide primer to all steel surfaces and 3 coats of white wash to internal surfaces of chamber including necessary earthwork in any type of soil well ramming of soil around the constructed chamber complete all as specified and as directed.

Material and labour for construction of valve pit chamber of internal dimension 1.5m x 1.5cm x 1.5m with sub class 'B' bricks in CM (1:4) with 15mm thick plastering in CM (1:4) inside the chamber and on the external portion exposed above ground level, PCC (1:4:8) type D2, 10cm thick for foundation, including 4mm thick MS cover welded around with MS flat iron of size 40mm x 6mm including MS angle iron frame of size 40 mm x 40mm x 6mm fixed in PCC 1:2:4 type B1 coping with 25x6mm flat iron holdfasts, hinges, handle, locking arrangement including painting with two coats of synthetic enamel paint over a coat of red oxide primer to all steel surfaces and 3 coats of white wash to internal surfaces of chamber including necessary earthwork in any type of soil well ramming of soil around the constructed chamber complete all as specified and as directed.

Material and labour for boring holes under road, pavement, hard standing by trenchless technology using ultra sounding technique and necessary euipments and including providing HDPE pipe of dia 150 dia suitable for 0.4 Mpa working pressure complete all as specified and as directed.

AIR CONDITIONING

Supply, installation, testing and commissioning of Tower/Split Type vertical AC of capacity 4 TON, (Copper coil) electric driven three phase, 415 volts, 50 Hz AC supply, complete with indoor & outdoor unit, remote control, including all accessories like brackets, MS stand made out from suitable size of MS angle iron, copper tubing with nitrile rubber insulation including brazing, suitable size of PVC drain pipe, PVC insulated multistranded copper cable of suitable size from indoor unit to outdoor unit, and making good to disturbed surface to match with the existing surface complete all as specified and as directed.

Supply, installation, testing and commissioning of inverter based wall mounted type split air conditioner of capacity 1.5 TON, (Copper coil) 3 star rating, electric driven single phase, 240 volts, 50 Hz AC supply, complete with indoor & outdoor unit, remote control, including all accessories like brackets, MS stand made out from suitable size of MS angle iron, copper tubing with nitrile rubber insulation including brazing, suitable size of PVC drain pipe, PVC insulated multistranded copper cable of suitable size from indoor unit to outdoor unit, and making good to disturbed surface to match with the existing surface complete all as specified and as directed. NOTE FOR ITEM NO. 11.031 & 13.032 ABOVE:- All cooling & condensing coil shall be of copper material & extra copper tubing with rubber insulation shall be measured & paid separately under relevant item of Schedule.

Supply and installation of voltage stabilizer automatic operation single phase naturally air cooled indoor type & designed for input variation between 170 Volts to 250 Volts with output voltage stabilized at 230 volts with accuracy of (±) 2.5 percent suitable for 1.5 Ton AC complete with digital display of input & output voltage, built in over load protection, initial time delay start, low & high voltage cut off and of capacity not less than 3.8 KVA complete all as specified and as directed.

Supply and fixing new copper tubes of size 1/4 inch for suction line including rubber tube insulations of same size for fixing AC complete all as specified and as directed.

Supply and fixing new copper tubes of size 5/8 inch for suction line including rubber tube insulations of same size for fixing AC complete all as specified and as directed.

Total amount of Schedule 'A' Part XI carried over to General Summary

Blank

Blank

GENERAL SUMMARY

Lumpsum price worked out by the contractor for “BUILDINGS & STRUCTURES” as listed in Schedule ‘A' Part I representing above / below the lumpsum price as inserted by MES for Schedule ‘A’ Part I on Srl Page No. 24(R)

Lumpsum price worked out by the contractor for “EXCAVATION AND EARTHWORK FOR BUILDING PORTION” as listed in Schedule ‘A' Part I (A) representing above / below the lumpsum price as inserted by MES for Schedule ‘A’ Part I(A) on Srl Page No. 24(A)

Lumpsum price worked out by the contractor for “INTERNAL WATER SUPPLY” as listed in Schedule ‘A' Part II representing above / below the lumpsum price as inserted by MES for Schedule ‘A’ Part II on Srl Page No. 26

Lumpsum price worked out by the contractor for “INTERNAL ELECTRIFICATION” as listed in Schedule ‘A' Part III above/below the lumpsum price as inserted by MES for Schedule ‘A’ Part III on Srl Page No. 34(R)

Lumpsum price worked out by the contractor for “ROAD/PATH/CULVERT” as listed in Schedule ‘A' Part IV representing above / below the lumpsum price as inserted by MES for Schedule ‘A’ Part IV on Srl Page No. 37(R)(R)

Lumpsum price worked out by the contractor for “EXTERNAL SEWAGE DISPOSAL” as listed in Schedule ‘A' Part V representing above / below the lumpsum price as inserted by MES for Schedule ‘A’ Part V on Srl Page No. 39

Lumpsum price worked out by the contractor for “AREA DRAINAGE” as listed in Schedule ‘A' Part VI representing above / below the lumpsum price as inserted by MES for Schedule ‘A’ Part VI on Srl Page No. 41

Lumpsum price worked out by the contractor for “COMPOUND WALL” as listed in Schedule ‘A' Part VII representing above / below the lumpsum price as inserted by MES for Schedule ‘A’ Part VII on Srl Page No. 45(A)

Lumpsum price worked out by the contractor for “EXTERNAL WATER SUPPLY AND RAW WATER SUPPLY” as listed in Schedule ‘A' Part VIII representing above / below the lumpsum price as inserted by MES for Schedule ‘A’ Part VIII on Srl Page No. 49(R)

Lumpsum price worked out by the contractor for “EXTERNAL ELECTRIFICATION” as listed in Schedule ‘A' Part IX representing above / below the lumpsum price as inserted by MES for Schedule ‘A’ Part IX on Srl Page No. 54

Lumpsum price worked out by the contractor for “SITE CLEARANCE AND EARTHWORK” as listed in Schedule ‘A' Part X representing above / below the lumpsum price as inserted by MES for Schedule ‘A’ Part X on Srl Page No. 56

Total amount of SCHEDULE 'A' PART XI (MISC B/R & E/M ITEMS) brought forwarded from Serial Page No. 85(R)(R)

SIBAL AND SIBAL

Asha Enterprises