Karnataka

AOC

Works

Buildings

Annual maintainence of Assistant Executive Engineer Quarters in Chikkanayakanahalli taluk in the year of 2025-26 Reserved for others

Public Works Department

PWD Division Office Tumkuru | Karnataka

Amount: ₹4.2 LCloses: 3 Jan 2026Closed

Timeline

Published26 Dec 2025
Closed3 Jan 2026
Awarded—

Bids

1 Bid3 Jan 2026

#	Company	Amount	Status
1	KUMARAIAH H ₹3.7 Laccepted-aoc	₹3.7 L	accepted-aoc

Tender Value

₹4.2 L

EMD Value

₹10,600

Closing Date

3 Jan 2026, 9:30 pmClosed

Tender Inviting Authority

Office Inviting Bids

Public Works Department

Contact Person

G Raju

Office Number

Work Description

Annual maintainence of Assistant Executive Engineer Quarters in Chikkanayakanahalli taluk in the year of 2025-26 Reserved for others

Tender Information

Tender ID

PWD/2025-26/BD/WORK_INDENT29447

Reference Number

PWD/2025-26/BD/WORK_INDENT29447

Tender Type

Open

Product Category

Buildings

Form of Contract

Two Tender Document System(Two Cover)

Location

PWD Division Office Tumkuru

Source Website

Subscribe to view

Documents Required

4 documents required · 4 mandatory

Technical Bid

RequiredAnnual Turnover Certificate

RequiredKPWD Registration Certificate

RequiredWork Done certificate

RequiredBid Capacity as per Bid Document

Eligibility Criteria

Tenders from Joint ventures are not acceptable.

Bidders shall not be under a declaration of ineligibility for corrupt and fraudulent practices issued by Government of Karnataka

Bidders shall ensure upload of relevant document certifying his/her status as Scheduled Caste/ Scheduled Tribe/other reserved category as prescribed in the tender document.

It shall be the responsibility of the Bidder to ensure credit of Tender Processing Fee and EMD into the respective receiving bank accounts of e-Procurement on or before the last date and time of bid submission.

EMD Payments through e-Payment mode shall be made as one single transaction and payments made in part are liable for rejection.

The bidder is required to ensure browser compatibility of the computer well in advance to the last date and time for receipt of tenders. The departments shall not be responsible for non-accessibility of KPPP portal due to internet connectivity issues and technical glitches at bidder,s end. Conditional tenders will not be accepted. The tenderer shall bear all costs associated with the preparation and submission of his tender, and the employer will in no case be responsible and liable for those costs. The cost of the Tender processing fee shall not be refundable

The employer is not responsible for any delay in accessing KPPP Portal, Royalty on construction materials and other taxes will be deducted as per prevailing Govt. orders. As per Karnataka state Government order LD/300/LET/2006 Bangalore dated 01.01.2007 and Government letter no PW/134/BMS/2007 dated 27.07.2007, a sum amounting to 1% of the bill amount will be deducted towards constructions labour welfare fund

All the formats prescribed in the bid document shall be filled by the tenderer in complete manner otherwise it will be rejected, All scanned documents to be uploaded shall be in original and the Executive Engineer reserves the right to verify the documents before approval, The employer reserves the rights to Reject or accept any or all the tenders without assigning any reasons.

The employer reserves the rights to Reject or accept any or all the tenders without assigning any reasons. In the case of the death of the contractor after executing the agreement / commencement of the work, his legal heir, if is an eligible registered contractor and is willing can execute and compete the work at the accepted tender rates irrespective of the cost of the work. Contractor should establish a fully functional laboratory at site at no extra cost in order to carry out all the required tests for the materials being used in the project

Contractor should take all precautions to ensure that no damage is caused to the existing canal CD works and other similar structures which have been constructed by other agencies during project execution. If any damage is caused, it has to be rectified at his own risk and cost. Contractor should carryout additional test required to test the suitability of materials including borrow area before using the same either as sub-grade or base course materials.

All safety precautions, warning signs, night illumination, reflectors, deployment of security guards has to be ensured so that no untoward incident happens on account of negligence or any project activity. Contractor should indemnify the client to that extent. Formation levels and other data furnished are bare minimum. the contractor should make all efforts to validate and to get additional data if required at his own cost.

Contractor should execute the project with least impact to the environment especially during earthwork, laying of GSB, bituminous surface etc. Contractor should adhere to HSE policy applicable for similar projects. Contractor to that extent should submit HSE document defining all the procedure including the policies before execution of the project. Further particulars, if any, required by the Contractor can be had from the office of the Executive Engineer, PWD, Division, Tumkur during office hours on all working days.

Materials like bitumen, steel, cement etc., required for the work shell be procured by the tenderer themselves and should got tested by the quality control authority before use on the work at their own cost. The contractors assessed available tender capacity will be calculated as per the clause 3.5 of STD tender document Attached.

All the items in the tender include all lead, lifts, loading unloading, transportation, labour, hire charges of machinery curing for concrete works, cost and conyence of all material and all other such incidental charges necessary for successful completion of works as per the detailed technical specification and direction of Engineer - in - charge of this work. When embankments are constructed disputes arising on account of damages to the existing field / channels, bunds and other private properties, if any, has to be resolved by the contractor. All precautions should be taken by the contractor so that there are no damages to such public private properties

Contractor should take all precautionary measures to avoid any damage to the utilities during excavation as well as utility shifting. To that extent the contractor should indemnify the client. Contractor should follow strictly the prevailing rules of labour act. Note:- If any postponement of receipt date of tender, the same will be published in the KPPP protal portal. The contractor shall maintain the road periodically, including removal of jungle, shoulder,drains and cross drain works asper the site conditions &as per the directions of Engineer in charge of work.

All the originals of uploaded documents in KPP-portal should be produced within 7 working days from the date of opening of Technical Bid at the Division Office, failing which the tender is liable for rejection. No separate communication will be made in this regard, failing which action will be taken as per tender conditions and registration rules. LOC / K-form for the stipulated amount should be submitted in the format as prescribed in the bid document only. Otherwise tender is liable for rejection.

The returns submitted to the I.T. along with the Profit and Loss account statement,Balance sheet should be uploaded for the financial turnover criteria attested by registered Chartered Accountant. Contractor should follow strictly the prevailing rules of labour act. Contractors are directed to employ only the labours who are registered in Labour Department, if the labours are not registered, they are to be registered before employing them to the work.

Contractors participating in the bid should submit Original Line of Credit of the copy uploaded through KPPP Portal with in one week after the last date of receipt of tenders. failing which their technical bids will be rejected. For the vehicles/machineries/ equipments for which RTO registration is statutory,for such vehicles/machineries / equipments the contractor should upload the Registration Certificate documents issued by RTO. For Machineries and other equipments for which RTO registration is not applicable, for such machineries and equipments, purchase invoice document should be uploaded. If there is sale deed for such machineries and equipments, original invoice along with registered sale deed should be uploaded.

Contractors should be registered with KPWD Class IV Registration.

All scanned documents to be uploaded shall be in original and the Executive Engineer reserves the right to verify the documents before approval.

The successful Tenderer shall deliver to the Employer a Security deposit in the form of FDR in the name of the Executive Engineer, Public works Department, Tumkur Division, Tumkur given below for an amount equivalent to 5% of the Contract price plus additional security for unbalanced tenders in accordance with the Conditions of Contract at the time of Aggrement.

1.All safety precautions, warning signs, night illumination, reflectors, deployment of security guards has to be ensured so that no untoward incident happens on account of negligence or any project activity. Contractor should indemnify the client to that extent. 2. All precautions should be taken by the contractor so that there are no damages to such public/ private properties.

Contractor should follow strictly the prevailing rules of labour act.

Further particulars, if any, required by the Contractor can be had from the office of the Executive Engineer, Public works Department, Tumkur Division, Tumkur during office hours on all working days.

The employer reserves the rights to Cancel or Withdraw any or all the tenders without Giving any reasons & Any Time.

The above mentioned road should be maintained properly free from potholes and other maintenance works upto 12 months.

The contractors assessed available tender capacity shall be more than the tender value, it will be calculated as per the STD tender document Attached

The Bidder shall not furnish any fake/fabricated/false information or withhold facts etc., if the bidder is found to have violated any of these above (found either during evaluation or after awarding the tender), the tender shall be rejected and action as per rules and regulations shall be taken against the Bidder

in case of the death of the contractor after executing the agreement commencement of the work, his legal heir if is an eligible registered contractor and is willing can execute and compete the work at the accepted tender rates irrespective of the cost of the work

THE CONTRACTORS ARE INSTRUCTED TO SUBMIT ONLY RELEVENT INFORMATION WITH RECORDS AS REQUIRED AND SPECIFIED IN QUALIFICATION CRITERIA.ANY JUNK ,SUPERFLUOS AND UNNECESARY DOCUMENTS IF UPLOADED WILL TREATED AS MISLEADING AND SUCH TENDERS ARE LIABLE TO BE REJECTED

It is mandatory that the Turn over certificate should be duly signed by an registered Chartered Accountant along with UDIN number

As per Government circular no: FD 355 EXP 12/2024 dt: 01.08.2024 Letter of intent(LOI) will be issued in Karnataka Public Procurement portal 2.0 software, contractor has to accept LOI online and submit the BGs through KPP portal, if not tender will be rejected as per guidelines

Contractor should adhere to HSE (Health Safety Environment) policy applicable for similar projects. Contractor to that extent should submit HSE document defining all the procedure including the policies before execution of the project.

Contractor should take all precautions to ensure that no damage is caused to the existing structures which have been constructed by other agencies during project execution. If any damage is caused, it has to be rectified at his own risk and cost.

Item including cost and conveyance of all materials lead and lift charges loading and unloading charges labor charges all incidental charges hire charges of all machinery and equipment required for successful completion of work etc. The work shall be executed as per standard technical specification and directions of Engineer in charge of the work

AS PER THE GOVT ORDER NO: FD417EXP-12/2024 DATED 09-08-2024 GST WILL BE PAID SEPARATELY

The defect liability period of this project is one year

As per instructions from Higher Authority Within 7 days of receipt of the Letter of Acceptance, the successful Tenderer shall deliver to the Employer a Security deposit in the form of FDR in the name of the Executive Engineer, Public works Department, Tumkur Division, for an amount equivalent to 5 % of the contract price plus additional security for unbalanced tenders.

The intending contractors are requested to note that they should abide by the detailed instructions and conditions contained in the Standard Tender documents KW-1

It is mandatory to upload SC/ST/CAT-1/CAT-11A caste certificate and Domicile certificate(if applicable)

For reserved works:- As per G.O.No.FD 876 EXP-12/2017, Bangalore Dt:10-10- 2017 and GO NO: FD 506 EXP-12/2024 DATED 20.08.2024 Security Deposit for an amount equivalent to 5% of the Contract price shall be deducted in every running bill. However, in case of 1st & Final bill the entire security deposit will be deducted from the final bill. (If applicable)

Civil Works to be Completed in three months & Pre final bill to be submitted

Works to be Started within 15days of Work Order Otherwise Tender Will be Cancelled

Technical Criteria

General

Department Registration Details

Total value of civl engineering works executed and payments received in the last five years (year-wise)

List of existing commitments and ongoing work

List of works for which tenders already submitted

Banker Details

Past Experience

3.2b satisfactorily completed(at least 50% of the contract value), as prime contractor, at least one similar nature of Building work value not less than Rs. 2.11 Lakhs (usually not less than 0.50% estimated value of contract)

Work Done Certificate

Capabilities of Vendor

KPWD Registration Certificate

PWD Registration Certificate (Class I/II/III/IV)

Financial Status

3.2a achieved in at least Two financial years a minimum financial turnover (in all classes of civil engineering construction works only) of Rs. 4.22 Lakhs (usually not less than one time the estimated annual payments under this contract

Audited CA Certificate of Annual Turnover

Bid Capacity as per bid document

Others -- Bid Capacity as per bid document

Work Locations

Fee & Financial Details

Tender Fee Amount

₹500

EMD Fee Amount

₹10,600

Important Dates

Last Activity

3 Jan 2026

Published

26 Dec 2025

Bid Opening

5 Jan 2026

Download Ends

2 Jan 2026

BOQ Preview

•

Annual maintainence of Assistant Executive Engineer Quarters in Chikkanayakanahalli taluk in the year of 2025-26

•

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :One coats on old work as per specifications and as per directions of En...

•

Finishing walls with Acrylic Smooth exterior paint of required shade :New work (Two coat applied @ 1.67L/10 m² over and including priming coat of exterior primer applied @ 2.20 kg/10 m²) with paint...

•

Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two coat applied @ 0.90L/10 m² over an under coat of primer applied @ 0.80 L/10 m² of approved brand and manuf...

•

Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to open...

•

Repairs to plaster in patches of 2.5 m2 and less in walls, ceilings 10 to 20mm thick in cement mortar 1:4 including cutting the patches in proper shape and replastering the surface of the wall inclu...

•

Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite...

•

Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the w...

•

Providing and fixing PTMT bib cock of approved quality and colour - 15 mm nominal bore, 90 mm long, weighing not less than 93 g ---- Item including cost and conveyance of all materials lead and lift c...

•

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixi...

•

Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for t...

•

Cleaning of under ground sump, Over Head R.C.C. Tank ( independent staging) including disposal of slit and rubbish, all as per direction of Engineer-in-Charge. The cleaning shall consist f...

•

Taking out existing wooden door shutter, repair by cutting, painting etc. and refixing of repaired door shutters to existing door frames, including replacement of hinges with screws, etc. as required,...

•

Providing and fixing in position fully panelled Mathi/Nandi wood shutters for doors with stiles and rails of 40mm. thick with bottom and lock rails 180mm wide top rail and stiles 100mm wide as per dra...

•

Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, w...

•

Polyurethane based Single Component for Existing Surface Providing and Applying PU based Elastomeric Liquid Applied PU Waterproofing Membrane single component, cold applied, water based acrylic PU dis...

•

Point wiring using Copper wire with switch Supplying and wiring adopting loop system in existing PVC Conduit /casing capping using 2x1.5mm2 (Phase & Neutral) & 1x1.0 mm2 (Earth wire) FRLS multi strand...

•

Supplying fixing of Surface mounting type retrofit type LED tube .W comprising of LED linear source with CCT 6500 degree K, C80 lumen per W, life 25000 burning hours and Compliance to IS 10322/IEC 605...

•

Supplying fixing of retrofit type - LED bulb 7W, 6500K W with OPAL acrylic diffuser comprising of LED source with CCT 6500 degree K,y 80 lumen per W, life 25000 burning hours and Compliance to IS 1032...

•

Supplying capacitor type ceiling fan complete with down rod blades, shackle,canopies etc,for operationon 230V, 50cycles. Single phase AC supply conforming to ISS-374-1979 and with double ball bearing ...

•

CURTAIN RODS: Providing and fixing double line curtain rods with 25mm dia., stainless steel of heavy gauge pipe with stainless steel end brackets and stainless steel supporting double brackets and I-b...

•

CURTAINS: Providing and Stitching of full height curtains from polyesters JAQUARD CLOTH curtains of basic with polyester lining Stitching with polyesters lining cloth and stiffener tape complete with ...

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

NIT Documents

29447 KW-1 General.doc

Tender Document • 0.14 MB

Ready to Participate?

Download all tender documents and submit your bid

Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .

Loading…

Company

KUMARAIAH H

₹3.7 Laccepted-aoc