shed Extension of 10 TPD Segregation Plant Dadumajra Chandigarh.

Earth work/ Municipal Solid Waste etc. in excavation by Mechanical means ( Hydraulic excavator) manual means over areas (exceeding 30cm in depth 1.5m in width as well as 10 sqm on plan) including disposal of excavated earth, lead up to 50m and lift up to 1.5m, and excluding of disposed earth to be leveled and neatly dresses (DSR : 2.6.1-2.36)

Construction of compacted granular sub base by providing and laying, spreading and compacting course graded sub base material sand , morrow, graval, crushed stone of combination thereof confirming to grading –I of table 400.2 of MORTH specification (5th revision). The material shall be mixed by mix in place method or with rotavator at OMC and carried to site, spread in uniform layers and compacted with 8-10 tones smooth heeled/Vibratory roller to achieve desired density. Complete in all respect as per clause 401 of MORT&H specification (5th revision)

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:4:8 (1 cement : 4 manufactured sand derived from Recycled Concrete Aggregate (RCA) : 8 graded stone aggregate 40 mm nominal size Recycled Aggregate (RA)

Centring and shuttering including strutting, propping etc. and removal of form for : Foundations, footings, bases of columns, etc. for mass concrete. (DSR:5.9.1)

Centring and shuttering including strutting, propping etc. and removal of form for : Columns, Pillars, Piers, Abutments, Posts and Struts.(DSR: 5.9.6)

Providing and laying in position ready mixed or site batched design mix cement concrete for reinforced cement concrete work; using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland /Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to accelerate / retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads; but excluding the cost of centering, shuttering, finishing and reinforcement as per direction of the engineer-in-charge for the following grades of concrete. Note: Extra cement up to 10% of the minimum specified cement content in design mix shall be payable separately.In case the cement content in design mix is more than 110% of the specified minimum cement content, the contractor shall have discretion to either re-design the mix or bear the cost of extra cement.(DSR 5.33.2)

Providing and laying C.C. pavement of mix M-25 with ready mixed concrete from batching plant. The ready mixed concrete shall be laid and finished with screed board vibrator , vacuum dewatering process and finally finished by floating, brooming with wire brush etc. complete as per specifications and directions of Engineer-in-charge. (The panel shuttering work shall be paid for separately). (Note:- Cement content considered in this item is @ 330 kg/cum. Excess/ less cement used as per design mix is payable/ recoverable separately). (DSR 16.75)

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level.Thermo-Mechanically Treated bars.(DSR 5.22.6)

Add for using extra cement in the items of design mix over and above the specified cement content therein.(DSR : 5.35)

Providing and fixing J bolts of 25 mm dia and anchor 100 mm long and nut arrangement or fixing of MS Columns/Truss incl. welding (wherever required) including making holes within MS plates or fixing with diffent members complete in all respect as per satisfaction of EIC.