PROVN OF COVERED SHED NEAR BLDG NO E-46, E-56 AND P-90 AND ADDN ALTERATION TO DISPERSAL NEAR APS AT FEROZEPUR CANTT

Amount

Demolition of unreinforced cement concrete in ground floor and pavings n.exc. 15 cm thick (below or above GL) complete all as specified and as directed by Engineer-in-Charge.

Material and labour for for excavation in post holes (or similar holes) each n exc 0.50cum, getting out in hard/dense soil, returning, filling, in and ramming earth or broken rubble mixed with earth around, in layers n.exc. 25cm, watering and removing surplus soil to a distance n.exc. 50 m and making good surface in hard/dense soil complete all as specified and as directed by Engineer-in-Charge.

Material and labour for for cement concete 1:2:4, type B-2 (40mm graded aggregate)as in foundations,filling and mass concrete complete all as specified and as directed by Engineer-in-Charge.

Material and labour for for excavation in trenches in soft/loose soil not exceeding 1.5 metre wide and not exceeding 1.5 metre deep and getting out complete all as specified and as directed by Engineer-in-Charge.

Returning,filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm in hard/dense soil, complete all as specified and as directed by Engineer-in-Charge.

Removing excavated material as soil exc. 50m and n.exc 250 m,depositing where directed at a level n.exc 1.5m above the starting point,complete all as specified and as directed by Engineer-in-Charge.

Material and labour for for 100 mm thick PCC (1:4:8) type D-2 (using 40 mm graded stone aggregate ) as in sub base for floors etc complete all as specified and as directed by Engineer-in-Charge.

Material and labour for for brushing neat cement slurry with 3.0 kg of cement per sqm complete all as specified and as directed by Engineer-in-Charge.

Material and labour for for 100mm thick PCC 1:2:4 type B-1, using 20mm graded stone aggregate as in floor finishing even and smooth using extra cement, including provision of expansion joints in cement concrete flooring to full thikness (100mm) complete all as specified and as directed by Engineer-in-Charge.

Material and labour for for forming 12mm thick expansion joints in cememt concrete floor 100mm thick joints filled with pre-formed bituminuous filler and top 30mm primed and sealed with sealing compound, grade 'A' complete all as specified and as directed by Engineer-in-Charge.

Material and labour for for brick work in cement mortar 1:6 using sub class 'B' old size bricks, straight or curved on plan exeeding 6 metre mean radius complete all as specified and as directed by Engineer-in-Charge.

Material and labour for for rendering 15mm thick in cement mortar (1:4) on concrete surfaces, surfaces finished fair and even complete all as specified and as directed by Engineer-in-Charge.

Material and labour for for preparation of new plastered surfaces and applying two coats of cement base paint over a coat of primer complete all as specified and as directed by Engineer-in-Charge.

Supply and fixing rolled sections as in post/ pillers where connnected with angle cleats or other connecting plates etc, of Fe 410-W (Gde E-250) Quality 'A' including fabrication, erraction and fixing complete all as specified and as directed by Engineer-in-Charge.

Supply and fixing roof trusses (framed ), trussed,purlin, crane gantries , rails and fastenings and heavy bracket framing(beam,tee,angles,channel or flat sections ) including distance pieces , cleats etc. of Fe 410-W (Gde E-250) quality 'A' including fabrication, erraction and fixing complete all as specified and as directed by Engineer-in-Charge.

Supply and fixing mild steel plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment and fixing complete all as specified and as directed by Engineer-in-Charge.

Supply and fixing mild steel screw bolts(machine made) with hexagonal or square heads at one end and screwed the other,or screwed bolt ends,each screwed end to be fitted with washers and one hexagonal or square nut,exc 5 cm long and n.exc 10 cm long and dia of shank 11 to 15 mm etc complete all as specified and as directed by Engineer-in-Charge.

Supply and fixing pre painted galvalume alumimium zinc coating GI based corrugated/crimped steel sheet 0.5mm thick of any colour having tensile strength of 550 Mpa in roof covering, fixed with self tapping screws complete all as specified and as directed by Engineer-in-Charge.

Supply and fixing Pre-painted galvatume aluminium zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall,fixed with self tapping screws complete all as specified and as directed by Engineer-in-Charge..

Material and labour for for preparation of new steel surfaces of any description, not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed by Engineer-in-Charge.

Surface dressing n exc 15 cm deep and getting out in soft/loose soil complete all as specified and as directed by Engineer-in-Charge.

Material and labour for cement concrete type D2 1:4:8 (using 40 mm graded aggregate) in foundations filling mass concrete complete all as specified and as directed by Engineer-in-Charge.

Material and labour for for hardcore of gauge not exc 63mm graded stone aggregates, deposited, spread and levelled in layers not exc 15 cm thick including watered and rammed to a true surface complete all as specified and as directed by Engineer-in-Charge.

Material and labour for for 75mm thick PCC (1:4:8) type D-2 using 40mm graded stone aggregate as in sub base of floors finishes complete all as specified and as directed by Engineer-in-Charge.

Material and labour for for forming contraction (Dummy) joints 50mm deep x 10mm wide filled with sealing compound, Grade ‘A’ complete all as specified and as directed by Engineer-in-Charge.

Material and labour for for preparing new plastered unplastered surface of wall and applying three coats of white wash on walls complete all as specified and as directed by Engineer-in-Charge.

Surface excavation in soft /loose soil not exceeding 30 cm deep and averaging 15 cm deep and getting out complete all as specified and as directed by Engineer-in-Charge.

Material and labour for Point wiring complete with 1100 volts grade PVC insulated unsheathed FRLS cable of copper conductor, multi stranded of size 1.5 sqmm, single core, in and including new rigid non-metallic PVC conealed conduit, /surface conduit with all accessories if require such as bends,reducers, spacers, saddles, junction boxes bakelite sheets, wooden rectangular boards / round blocks(for housing lamp holders and light fittings etc) and existing MS pressed steel / cast iron sunken boxes of suitable size for mounting switches/bell pushes / sockets, fan regulator etc covered with new 3 mm thick laminated bakelite sheet top cover including continuous earth wire of size 1.5 sqmm unsheated stranded copper conductor with green PVC insulation connected to common earth dolly complete all as specified and as directed by Engineer-in-Charge. for One light/fan/Bell Point controlled by one single pole one way switch.

ditto all as per item No 28 above but for one 3 pin socket outlet 5 Amp on the same board controlled by one single pole one way switch

ditto all as per item No 28 above but for one 5 amps socket outlet independent controlled by one single pole 5 Amp switch.

ditto all as per item No 28 above but for one three pin 15 Amps switch socket out let on the independent board with 2.5 Sq mm PVC insulated copper conductor and 2.5 Sqmm copper conductor for continuous earthing complete.

Supply and fixing Switch piano flush type 6 amps, one way complete all as specified and as directed by Engineer-in-Charge.

Supply and fixing Switch piano flush type 16 amps, one way complete all as specified and as directed by Engineer-in-Charge.

Supply and fixing Socket outlet 3 pin, 6 Amps, piano flush type complete all as specified and as directed by Engineer-in-Charge.

Supply and fixing Socket outlet, 2 in one 6 pin 5 and 16 Amps piano flush type complete all as specified and as directed by Engineer-in-Charge.

Supply and fixing in repair Ceiling rose surface type, PVC/polycarbonate ,isolated, bakelite 65 x 50mm, 3 terminals complete all as specified and as directed by Engineer-in-Charge.

Supply and fixing in repair sheet metal enclouser DB's 8 way double door factory made powder coated out of CRCA mild steel sheet 1.2 mm thick wih metallic painting white series, 240 volts 200 Amps rated enameled bus bar 8 way dust and vermin proof suitable for incorporation of MCBs duly concealed in wall and making good to distrubed surface and colour matching complete all as specified and as directed by Engineer-in-Charge.

Supply and fixing in repair MCB single pole neutral (SPN) 240 volts, 20 to 40 Amps, 10 KAcomplete all as specified and as directed by Engineer-in-Charge.

Supply & Fixing in repair MCB single pole (SP) 240 volts, 6-32 Amps, 10 KA 'B' Series complete all as specified and as directed by Engineer-in-Charge.

Supply and fixing in repair LED Bldg Security light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and as directed by Engineer-in-Charge.

Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC)complete all as specified and as directed by Engineer-in-Charge.

Supply & Fixing LED tube light fitting 18/20 Watts,4 feet long decorative ultra slim linear LED lighting fixture (White/Warm white) with extruded polycarbonate, environmental friendly, energy efficient 230V, complete with all accessories internally pre wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size complete all as specified and as directed by Engineer-in-Charge.

Supply & Fixing Lamp holder PVC/ Polycarbonate, isolated with back plate suitable for batten fittings including 10W LED Bulb complete all as specified and as directed by Engineer-in-Charge.

M/s Harkesh Kumar Bansal