PROVISION OF TILING IN TOILETS KITCHEN AND IN ROOMS INCLUDING CERTAIN MODIFICATIONS IN BLDG NO P 546 36 QTRS AT CDM SECUNDERABAD UNDER GE NORTH SECUNDERABAD

Amount

Demolition of cement concrete of any description and in any position as in sunken floors not otherwise specifically provided complete all as specified and as directed.

M&L for priming plastered surfaces with water based bitumen emulsion primer @ 0.3 Ltrs/Sqm including cleaning the surface thoroughly from dust and dirt and laying water proofing treatment with polymeric membrane of weight 3 Kgs/Sqm standard consisting of 90 micron HMHDPE torch on membrane and finally applying a coat of hot blown bitumen 85/25 at the rat of 12 Kg/Sqm on top of membrane and providing 25mm thick sand cushioning to receive lean concrete as in sunken floor complete all as specified and as directed.

M&L for demolition of brick work or stone boulders masonry built in cement mortar or cement lime mortar including all quions, arches, pillars etc., complete all as specified and as directed.

M&L for rendering 15 mm thick in cement mortar 1:3 on fair faces of brick/concrete surfaces of sunken floors, including taking down existing plaster and mixing of water proofing compound, finished even and fair complete all as specified and as directed. Note: Water proofing compound shall be measured and paid separately.

M&L for PCC (1:7:12) type F2 using 40 mm graded stone aggregate as in filling and mass concrete complete all as specified and as directed.

M&L for PCC 1:2:4 type B0 12.5 mm stone aggregate of average 25 mm thick make to slope in sunken floors complete all as specified and as directed.

Taking out existing water closet, squatting pan of any size and supply & fix vitreous China squatting pan ‘Orissa’ pattern, size 580 X 440 mm white, integral foot rests (excluding flushing cistern and flush pipe) including connection to trap and to flushing pipe, anti-syphonage pipe, lime concrete etc. complete including making good to floor to match with adjoining surfaces complete all as specified and as directed.

S & F in repairs 32 mm dia GI pipe medium grade in short lengths for spouts including cutting holes in walls and making good with cement mortar (1:3) complete all as specified and as directed.

M&L for demolition of cement concrete in ground floors and paving not exceeding 15cm thickness below or above ground complete all as specified and as directed.

S&F glazed ceramic tiles in vertical surface 350x250x7mm/ 450X350x7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match on including backing coat of 10 mm thick in cement mortar 1:4 including dismantling of old existing tiles complete all as specified and as directed.

S & F non skid ceramic coloured tiles of 1st quality 7 to 8 mm thick (square /rectangular) area of each tile exceeding 0.06 Sqm and not exceeding 0.11 Sqm in floors etc., set and jointed in neat cement slurry and pointed in coloured cement to match over a screed bed 15mm thick in cement mortar 1:6 including dismantling of old existing tiles complete all as specified and as directed.

Taking down cement plaster on brick walls/ RCC of any description etc., including racking out joints and hacking for key scrubbing down with water complete all as specified and as directed.

Supply only integral water proofing compound complete all as specified and as directed.

Taking up & down steel tubing 15mm bore and connections, including cleaning for re-fixing or removal to MES storeyard or consider against schedule of credit complete all as specified and as directed.

Taking up & down steel tubing 20mm bore and connections including cleaning for re-fixing or removal to MES storeyard or consider against schedule of credit complete all as specified and as directed.

S&F GI tubing of size 15 mm dia medium grade fixed to walls / floors complete all as specified and as directed.

S&F GI tubing of size 20 mm dia medium grade fixed to walls/floors complete all as specified and as directed.

S & F in repairs PVC (SWR) floor trap 75mm dia plain with grating including jointing to waste pipe fixed in PCC (1:2:4) type B1 complete all as specified and as directed.

M&L for UPVC/PVC (SWR) pipes 110mm dia fixed to walls single socketed with rubber ring joints including dismantling of old pipes complete all as specified and as directed.

M & L for UPVC/PVC (SWR) pipes 75mm dia fixed to walls, single socketed with rubber ring joints including dismantling of old pipes complete all as directed and as specified.

S&F shelf of PTMT fixed with and including chromium plated brass screws and wooden/plastic cleats complete all as specified and as directed.

S&F in repairs 600 mm long of PTMT towel rail fixed with and including chromium plated brass screws and wooden/plastic cleats complete all as specified and as directed.

S & F in repairs rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) 1000 ltr capacity, hoisted and fixed in position including 20mm dia PTMT float valve including taking down old existing complete all as specified and as directed.

S & F in repairs gun metal gate valve with iron wheel head screwed both ends for 20 mm bore pipe complete all as specified and as directed.

M&L for cast iron soil waste and vent pipes of size 100 mm of any length, sand cast with or with out ears with cement joint fixed to walls incl dismantling existing old pipes complete all as specified and as directed.

M&L for cast iron soil waste and vent pipes of size 75 mm of any length, sand cast with or with out ears with cement joint fixed to walls incl dismantling existing old pipes complete all as specified and as directed.

S&F CI bends (any length) diminishing pieces or tapers of 100mm bore complete all as specified and as directed..

S&F CI bends (any length) diminishing pieces or tapers of 75mm bore complete all as specified and as directed..

S&F in repairs PVC (SWR) bends 110mm bore of any radius with oval access door complete all as specified and as directed.

S&F in repairs PVC (SWR) branch piece, single (single 'Y' or 'T' etc.,) equal or unequal 110mm dia with access doors complete all as specified and as directed.

S & F in repair 75mm bore PVC (SWR) plain bends of any radius with oval access door complete all as specified and as directed.

S&F in repairs PVC (SWR) branch piece, single (single 'Y' or 'T' etc.,) equal or unequal 75 mm dia with access doors complete all as specified and as directed.

S&F in repairs PVC (SWR) vent cowls 110mm dia complete all as specified and as directed.

M&L for 75 mm thick PCC 1:3:6, type C2 (using 40mm graded stone aggregate) in plinth protection laid in alternative bays finished even and smooth without using extra cement including making 10 mm wide grooves to full depth at 3 m interval and at every change of direction and filling the grooves with mixture of bitumen and sand mixed in the ratio of 1:3 by weight and top 10 mm depth sealed with sealing compound grade ‘A’ complete all as complete all as specified and as directed.

M&L for applying one coat of synthetic enamelled paint on wood & wood based materials of any description, not other wise described over 10 cm width or girth including preparation of old surfaces complete all as specified and as directed.

M&L for applying one coats of synthetic enamelled paint on steel or iron surface based materials of any description, not other-wise described over 10 cm width or girth including preparation of old surfaces complete all as specified and as directed.

Taking down cement plaster / terrazo cast in-situ on brick or stone or concrete surface including raking out joints, hacking for key scrubbing down with water, etc., complete all as specified and as directed.

M & L for rendering 15mm thick on brick work or concrete surfaces in cement mortar 1:6 and finished even and smooth without using extra cement etc., complete all as specified and as directed.

M & L for rendering 10mm thick on brick work or concrete surfaces in cement mortar 1:4 finished even and smooth without using extra cement etc., complete all as specified and as directed.

M & L for rendering 5mm thick on concrete surfaces in cement mortar 1:3 in ceiling not exceeding 3.00 Sqm each and finished even and smooth without using extra cement complete all as specified and as directed.

M&L for applying two coats of cement based paint including preparation of newly plastered surfaces complete all as specified and as directed.

M&L for preparation of newly plastered surfaces and applying two coats of white wash complete all as specified and as directed.

M&L for preparation of three coats of white wash including preparation of newly plastered ceiling surfaces complete all as specified and as directed.

M&L for preparing old ceiling surface and applying one coat of white wash complete all as specified and as directed.

M&L for preparing old wall surface and applying two coats of white wash complete all as specified and as directed.

M&L for applying two coats of cement base paint including complete removal of existing treatment on wall surfaces complete all as specified and as directed.

Taking down chowkats or frames with shutters without taking of shutter from frame area not exceeding 1.5 Sqm each complete all as specified and as directed.

S&F solid PVC door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS Square tube, supplying and fixing in opening as per specification and drawing complete all as specified and as directed.

S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top and bottom rails MS frames shall be covered with head moulded plain colour PVC ‘C' channel having a PVC sheet strip of 20mm width struck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail, and bottom rail on either side and as gap insert for top rail and bottom rail paneling of plain colour PVC sheet to be fitted in the MS frame welded and sealed to the stiles rails with suitable PVC sheet beading and jointed together with solvent cement, supplying and fixing in the frame at site as per specification and drawing complete all as specified and as directed.

S & F 100 mm long extruded aluminium alloy butt hinges type C-21 complete all as specified and as directed.

S&F 200mm long aluminum anodized barred tower bolts, of extruded section with bright bolt complete all as specified and as directed.

S&F extruded aluminium alloy handles fabricated type, anodised 150 mm long complete all as specified and as directed.

S & F 300mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast 01' extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and as directed.

Taking down door shutters and refixing in same opening after carrying out alteration of any description area exceeding 1.00 Sqm and not exceeding 2.00 Sqm each complete all as specified and as directed.

S&F 100mm long MS butt hinges, medium weight, cold rolled mild steel complete all as specified and as directed.

S & F 150 mm long Mild steel pressed handles, oval type, stove enamelled black complete all as specified and as directed.

S&F 200mm long Mild steel barrel tower bolts, stove enamelled black, with bright bolt and fixed complete all as specified and as directed.

S&F 300mm long Mild steel sliding door bolts, plate type stove enamelled block with bright bolt not less then 12 mm dia and including a minimum of 6 bolts and nuts four of bolts for plates and two on staple plate complete all as specified and as directed.

S&F Galvanised mild steel wire cloth 0.56 mm nominal dia of wire cloth and average width of aperture 1.18 mm complete all as specified and as directed.

S&F 3mm thick sheet glass, ordinary quality and glazing with oil putty in squares not exceeding 0.5 Sqm in each pane complete all as specified and as directed.

S & F 10 litres capacity PVC low level flushing cistern including brackets, fixed in repairs complete all as specified and as directed.

S&F 125 mm dia brass chromium plated shower rose with swivel joints fixed in repairs complete all as specified and as directed.

S & F in repairs PVC connections of 15mm dia and 450 mm long complete all as specified and as directed.

S&F in repair stop valves 15 mm dia bore, fancy type chromium plated cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, fancy type, screwed both ends for iron pipe or for unions complete all as specified and as directed.

S&F in repair bib taps 15 dia bore, cast copper alloy with crutch or butterfly handle, screwed down, fancy type chromium plated screwed for iron pipe or for brass ferrule complete all as specified and as directed.

S&F 32 mm dia PVC waste pipe 90 cm long complete all as specified and as directed.

S&F in repairs vitreous china urinals, half stall type complete including providing & fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60 mm long brass screw, pointing around urinal back in cement complete all as specified and as directed.

S &F in repairs of 100 mm dia cast iron Nahani trap with grating including jointing to waste pipe fixed in cement concrete (1:2:4) type B1 complete all as specified and as directed.

M&L for cutting holes in to brick walls built in cement mortar and making good dismantling portion in cement mortar, superficial area exceeding 150 Sqcm, but not exceeding 400 Sqcm complete all as specified and as directed.

S&F pressed steel frame of size 165 x 60mm for doors with one or more rebates incl necessary fixing lugs, hinges, lock strike plate, etc., complete all as specified and as directed.

S&F 35mm thick, 2nd class hardwood glazed & skeleton shutters, open rebated & prepared to receive glass, gauge, etc., (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut & mitred beads for securing glass, etc., sizes of members of shutters as specified in SSR Part-I section 8 clause 8.20 (a) complete all as specified and as directed.

S&F 30mm thick flush shutter solid core construction with black board core and ply wood face panels commercial type on both sides complete all as specified and as directed.

M & L for 20mm to 25 mm thick machine cut polished Cuddapah stone slabs in cooking platform, shelfs etc., laid over 15 mm thick cement mortar (1:4) screed including jointed and pointed in grey cement slurry mixed with pigment to match the shade of the slab complete all as specified and as directed.

M&L for Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match complete over 15 mm thick screed in cement mortar 1:6 complete all as specified and as directed.

All as per item No: 75 above but in riser of steps, skirting, dado and pillar including 10mm thick rendering in cement mortar (1:4) backing of wall tiles such as dado/skirting in vertical surface complete all as specified and as directed.

S&F vitreous china wash basin with pedestal, white flat size 550x400mm including bracket cutting for and pining in ends of brackets or erecting stand including PVC connection pipe 15 mm bore 450 mm long, waste coupling of PTMT, PVC waste pipe complete all as specified and as directed.

S&F steel windows with side hung double shutter (glazed shutter open out side and wire mesh shutter open inside including projecting type hinges with steel handle and steel peg stay complete with glazing bars, dove tailed or welded complete all as specified and as directed.

S&F steel ventilator with top hung shutter including hinges, steel peg stay complete all as specified and as directed.

M & L for point wiring on conduit with 1.5 Sqmm copper conductor single core PVC insulated sheathed 1100 V multistranded drawn through conduit and including rigid PVC conduit and conduit accessories of suitable dia medium grade and pressed steel terminal boxes of 2 mm thick MS duly painted with red oxide metal primer including fixing/grouting sunken/ surface as per site requirement covered with 3 mm thick laminated hylam sheet including running up of 1.5 Sqmm copper conductor PVC insulated cable as earth continuity conductor along with wiring and connecting to the common earth dolly for fixing the switches/ sockets/ regulators etc., for one light/fan/Bell point controlled by one, one way switch 5A, SP complete all as specified and as directed.

All as per serial item No 80 above but one 2/3 pin 5 Amps switch socket outlet point controlled by one switch on the same board complete all as specified and as directed.

All as per serial item No 80 above but one 3 Pin 5 Amps switch socket Independent board complete all as specified and as directed.

All as per serial item No 80 above but using 2.5 Sqmm FRLS single core copper conductor cable of multistranded PVC insulated unsheathed 1100 Volts grade for 5/15 Amps switch socket combination point including running of 2.5 Sqmm FRLS copper conductor PVC wire as earth continuity conductor along with wiring and connecting to the common earth dolly complete all as specified and as directed.

S & F switch piano single pole flush type 5 amps, 230 volts complete all as specified and as directed.

S&F bell push 5 A flush type complete all as specified and as directed.

Supply and fix socket outlet flush type multipurpose 2 in 1, 3 Pin, 5 amps, 230 volts complete all as specified and as directed.

S & F switch socket combination flush type multipurpose 2/3 pin, 5 amps 2 in 1, 230 Volts complete all as specified and as directed.

S & F switch socket combination 2 in 1 multipurpose 3/5 pin 5/15 amps flush type complete all as specified and as directed.

S & F calling bell AC 230 Volts Single pole complete all as specified and as directed.

Supply and fix Desert coolers of PVC body with 2000 cubic meter per hour (Peak) and 1500 Cubic meter per hour (Average) with honey comb cooling media and water tank capacity of 36 ltrs complete all as specified and as directed. Make: Model PX 97 TORQUE of Bajaj or equivalent in Symphony as approved by GE.

Supply and fix Metal Body Exhaust fan of 300mm sweep of 1400 RPM, Air Delivery 750 CMH single phase 50 HZ AC Supply with louvers and connecting up with and including provision of PVC insulated copper flexible cord from ceiling rose to connection of exhaust fan complete all as specified and as directed. Make: Model Freshee MK II of Bajaj or equivalent in Havells/Crompton as approved by GE.

S & F in replacement of wall mounted batten type LED light of 12 watts with aluminium extruded batten and system lumens of 1200 lm minimum with IP & surge protection alongwith driver efficiency >85% and power factor >0.95 , colour rendering index CRI>80 along with integrated driver complete and connecting to the point wiring with necessary flexible copper conductor of multistrand three core of suitable length from fitting to the ceiling rose complete all as specified and as directed. Make: Philips Model BN021 LED12S PSU GR or equivalent in Wipro/GE as approved by GE.

S & F ceiling rose three terminal surface bakelite type AC 230V of size 65x50 mm complete all as specified and as directed.

M&L for cutting of hole at wall or fabrication of aluminium frame with glass wall for fixing of exhaust fan including plastering and match with the existing surfaces complete all as specified and as directed.

S&F in replacement of metallic louvers mounted suitable for exhaust fan of 300 to 450 mm on wall complete all as specified and as directed.

S & F MCB SP 230V suitable for fixing on MCB DB of capacity 6 to 32 Amps complete all as specified and as directed. Make: IndoAsian Cat Part No 811122-29 or equivalent in Standard/Havells as approved by GE.

M/S NOVA CONSTRUCTIONS

BEEGEE DESIGN SYSTEMS

VACON INFRASTRUCTURES

K LAKSHMAN SINGH AND CO

S.R.M.K Enterprises

SKY CONSTRUCTIONS

Himagiri Constructions

A SOMA RAJU

M/S DIVIJA BUILDERS