E-quotation No. 05 2026-27

Supplying, Installation, testing and commissioning of water lubricated single or multistage, Radial/Mixed flow Vertical turbine pump(make-Kirloskar /Jyoti/WPIL / WILO Mather & platt) having discharge of 117 m³/hr against a total head of 30 meters consisting of pump bowl assemblies with dynamically balanced bronze impeller , stainless steel pump shaft , S.S. line shaft 1.5 mtr length each , 30 feet MS fabricated flanged type column assembly , strainer, non- reverse rachet coupling and discharge head etc. coupled with suitable Vertical hollow shaft -IE3 energy efficient SPDP Squirrel cage induction motor (Kirloskar/ Jyoti/ CGL make) confirming to IS 12615:2011 with latest amendments having 10% more BHP than that of Pump operating on 3-PH, 50Hz, 415 ± 10%, 1450-1500 rpm with required size of ISI marked heavy duty CIDF sluice valve & CIDF NR valve , Pressure gauge, MS clamp including cost of construction of new foundation with suitable size of nut ,bolts and packings and doing fabrication work for connecting the exiting common header delivery line etc. all complete or as per site requirement or direction of E/I.

Cost towards supplying, Installation, testing & commissioning of free standing type floor mounted cubical LT motor control panel fabricated with MS sheet of suitable gauge and size duly painted with two coats of red oxide primer comprising of 200 Amp, 440V copper bus bar arrangement 4 pole consisting of following accessories: (i) 200Amp MCCB – 1 No. (Incoming feeder) (ii) 100 Amp MCCB – 03Nos (outgoing feeder). (iii) 100 Amp MCCB – 01No. (As spare) (iv) 32 Amp MCB -1 No. for lighting load and other utility load. (v) Fully Automatic Star Delta (FASD) Starter (L&K/Havell’s/Siemen’s/Schneider/BCH make) suitable for Above pump set or more etc.- 3 Nos. (vi) 3-phase Digital display Voltmeter & Amp Meter -3Sets, Phase indicating light R-Y-B -3 Nos. (vii) Copper Bus Bar- 04 Pole 200 Amp, 415V Copper strip bus bar enclosed in MS sheet along with overload relay, Motor protection device (MPD), Proper power & control wiring inside by suitable size of copper conductor and wires etc. all complete set including transportation and fitting & mounting charges at P/Plant.

Cost towards special repairing,changing & servicing of motor control panel with FASD starter and 200 Amp Incoming MCCB , 100 Amp outgoing MCCB, Copper Bus bar with S/F of following works- i. Changing of Star contactor MNX-70-01 Nos. & Delta contactor MNX-80-02 nos. & Main contactor MNX-80 – 02 Nos. (L&K/Havell’s/Siemen’s/Schneider/BCH make) ii. Incoming MCCB 200 Amp-01 No. , Outgoing MCCB 100 Amp -01 No. (L&K/Havell’s/Siemen’s/Schneider/BCH make) iii. Timer (3-30 sec)-02 Nos. (L&T Make). iv. ON-OFF push buttons-04 Nos. v. 3 Phase LED Voltmeter CI 0.5-01 Nos. vi. 3 Phase LED Ampere meter CI 0.5 -02 Nos. vii. Single phasing, reverse current, under voltage, over voltage protection relay-01 set each for both motor. viii. LED Phase indicating bulb-06 Nos. ix. Auto/Manual Selector switch-02 Nos. x. Thermal overload Relay -80 A max.-01 No. xi. 4 sq. mm Single core copper cable-20 mtrs. for control wiring and 16 sq. mm single core copper cable- 10 mtrs with copper lugs, tape etc. with all fittings & electrician charges at Raw Water P/Plant.

Light wiring inside and outside of pump house with LED street light-02 Nos. (40 Watt), LED tube set- 2 Nos. (20 Watt).

Cost towards supplying, Installation and commissioning of 100 KVA Servo controlled (Oil cooled) automatic voltage stabilizer suitable for output voltage of 415 volt ± 1% 3 phase 50 Hz with copper wound transformer as mentioned below. The stabilizer shall function satisfactorily even if incoming supply is unbalanced between phases within range of 10%. The stabilizer should be constructed in cubical box, with bidirectional wheels for easy handling necessary monitors and user’s controls on front panel such as indication alarm, voltmeter and selector switch for measuring input and output voltage auto manual selector switch. Raise low push buttons etc. Suitable capacity termination strips and bus bars for incoming and outgoing cable should be provided. All three phases shall be independently monitored and corrected. Following protections and indication shall be incorporated. Over Voltage/Under Voltage Single Phasing Cut off contactor with electronic output sensing unit Suitable change over switch and Earthing 100 KVA Oil cooled Servo controlled automatic voltage stabilizer (Output 415 unit ±1%) Input 220 to 480 Volt.

Supplying and filling of T-oil.

Cost towards complete servicing and repairing of stabilizer with all labour, tools and tackles and electrician charges etc. all complete job and testing on full load of 100 KVA Oil cooled Servo Voltage Stabilizer working on three phase input Voltage-220 to 480 V and Output- 415±1%V. Make- Servokon System Limited with following works- i.Cost towards disconnection and cleaning of stabilizer with all labour tools and tackles ii.Cost towards S/F of servo motor as per sample – 3 Nos. iii.Cost towards S/f of Panel Sensing/control PCB Card as per sample – 2 Nos. iv.R.C kit – 2 Unit v.Control transformer. – 2 Nos. vi.3 phase Digital Voltmeter (Input/Output) As Per sample – 01 No. vii. Armored and shaft

Supplying and filling of T-oil.

Providing all labours, tools, tackels and technician for disconnection and taking out 20 HP VT p/set with column pipe from intake well all complete set.