Sculpture and Heritage Elevation Work At EMRS Under Phase - II At Peepalkhunt Distt. Pratapgarh

Amount

Providing and Hoisting fixing upto floor three level precast Reinforced concrete heritage work in nominal M20 grade mix including cost of required centering and shuttering finishing smooth with 6mm thick cement plaster 1:3 on exposed surface complete including cost of reinforcement,wire mesh of approved drawing for CHHATRI 12’X4’ , including ornamental pillar size0.15m and 1.80 to 2.40m height complete with Todi, Chajja, Tarana,Merab,Chabna,Thela, Patti with Dome(3’ to 5’)Brick masonry , Arch plaster with Ornamental Design work etc as per direction of Engineer-in-charge

(A)CHHATRI size 12’X4’

(B)CHHATRI size2’X2

(C)Ornamental Patti 3” to 4”

(D) Decorative pillars

(E) Kamal Kalthan

(f) Todi Below Chajja

Manufacturing , Supplying , packing and making ready for shipping , transportation and installation of EKLVYA façade sculpture 02 Nos at Each of the following location the sculpture shall be made of Asht Dhatu shall be as under copper 85% (Maximum allowable range between 80% to 85%) Zinc 5% , Tin 5% , Lead 5% , Total 15% (Maximum allowable range between 13% to 17% ) wall thickness of the cost should not be less than 4-5mm. total weight of the facade sculpture should be between 550kg to 600kg. Posture of the facade sculpture shall be as per approved photo with tender document . the bidder shall have prepare 3D computerized hologram as per the approved photo and get in approved from the competent authority of the department the rate shall includethe cost of preparing 3D hologram clay mode / ready at the required location and all activities described above as per direction of engineer-in-charge. the proposed size of FACADE sculpture is LIFE SIZE 6'6". the rate shall inclusive of all applicable taxes.

SAGARAM INFRASTRUCTURE PRIVATE LIMITED (BID ID -3169080)