GE/SRA/T-65/2025-26

REPAIRS TO HANGAR DOORS

M&L for cleaning, greasing, oiling and adjustment of existing top hangar door rail track, measured in running metre, complete all as specified and directed, including removal of dirt/rust deposits, checking and minor adjustment of guides, brackets and pulleys, tightening of fasteners, minor welding if required, and ensuring proper alignment and smooth movement of shutters complete all as specified and directed. NOTES: (1) Measurement shall be in running metre of top rail track actually attended. Each individual track shall be measured separately. (2) Item includes cleaning, greasing, oiling, minor adjustments and minor welding necessary for smooth operation. (3) Major replacements such as rollers, ball bearings, shafts, rails or structural members shall be measured and paid separately. (4) Rate shall be deemed to include all labour, tools, plants, scaffolding and incidental works

M&L for cleaning, greasing, oiling and adjustment of existing bottom hangar door rail track, measured in running metre, complete all as specified and directed, including removal of dirt/rust deposits, checking and minor adjustment of guides and rollers, tightening of fasteners, minor welding if required, and ensuring proper alignment and smooth movement of shutters complete all as specified and directed. NOTES: (1) Measurement shall be in running metre of bottom rail track actually attended. Each individual track shall be measured separately. (2) Item includes cleaning, greasing, oiling, minor adjustments and minor welding necessary for smooth operation. (3) Major replacements such as rollers, ball bearings, shafts, rails or structural members shall be measured and paid separately. (4) Rate shall be deemed to include all labour, tools, plants, scaffolding and incidental works.

M&L for oiling, greasing, and cleaning of pulleys for each steel sliding hangar door, including: (i) Cleaning using approved industrial cleaning agents/thinner, if required (ii) Oiling and greasing to reduce friction (iii) Adjustment for smooth functioning of door NOTES: (1) Minor consumables and routine adjustments included. (2) T&P, scaffolding, ladders, and labour included.

S&F in repairs hangar door wheel made of mild steel (IS 2062 Fe-410) of diameter not exceeding 350 mm and thickness not more than 100 mm complete all as specified and directed including: (i) Cutting/machining of grooves for bearing and circlip (ii) Providing and fitting high-precision wheel with locking pin (iii) Removal of existing unserviceable wheel and fixing of new wheel complete with shaft/axle for bottom support (iv) Greasing, minor welding and adjustment work as required NOTES: (1) Wheel must match or exceed the specification of the original wheel (diameter, load capacity and shaft diameter same or higher). (2) Rate includes supply of wheel and shaft/axle, tools & plants, scaffolding and labour. (3) Ball bearings shall be measured and paid separately.

S&F in replacement of stainless steel ball bearing of any diameter for hangar door rollers, as per existing design/specification. NOTES: (1) Specifications must match or exceed original. (2) T&P, scaffolding, ladders, and labour included.

S&F in repair top guide roller assembly (MS) with diameter not exceeding 300 mm and thickness 30–100 mm, including: (i) Fixing of ball bearing and central pin (ii) Lifting existing door for installation (iii) Welding, greasing, and alignment of top guide for smooth shutter movement NOTES: (1) Roller must match or exceed specification of original. (2) Rate includes T&P, scaffolding, labour; shaft/axle included. (3) Ball bearings measured separately.

GENERAL NOTES COMMONLY APPLICABLE TO ITEM NO 1.01 TO 1.08 (1) Scope Limitation : These items cover mechanical repair, overhauling, replacement, alignment, and refixing of sliding hangar door shutters and associated mechanical components only. Electrical/motorized systems, if any, are excluded. (2) Experienced Manpower All works shall be executed only through skilled and experienced workmen having proven experience in handling and repairing large sliding steel hangar doors or similar heavy industrial doors. contd....

SPECIAL RESPONSE & PENALTY NOTE (APPLICABLE TO ITEM NO 1.09) (1) Attendance & Inspection The contractor shall attend the site within 24 hours of intimation, inspect the complaint, assess the defect, and take necessary immediate action to ensure safety and functionality. (2) Rectification Period Where replacement of parts or major rectification is involved, the contractor shall complete the work within the time period approved by the Engineer-in-Charge. (3) Penalty Clause In case the contractor fails to attend the site within 24 hours of intimation, recovery at the rate of ₹500 per day per door shall be effected till the date of attendance, without prejudice to the department’s right to get the work executed through other agencies at the risk and cost of the contractor.

REPAIRS TO ROLLING SHUTTERS

M&L for routine repair and maintenance of existing rolling shutters without taking down, of any size complete all as specified and directed, including: (i) Inspection of shutter, guide channels, rollers, spring assembly, hood/top cover, and all moving parts. (ii) Cleaning of shutter, rails, guide channels, rollers, and moving parts. (iii) Lubrication, greasing, and oiling of rollers, shafts, bearings, springs, and locking arrangements. (iv) Adjustment or tightening of loose nuts, bolts, screws, and minor fittings. (v) Minor welding, straightening, or rectification to ensure smooth, noiseless, and jerk-free operation. (vi) Alignment of shutter leaves, guide channels, and bottom lock plate for proper functioning. NOTES: (1) The rate includes all labour, tools, plants, scaffolding, ladders, lifting arrangements, minor consumables, and safety equipment required for execution. (2) Replacement of major components such as laths, springs, rollers, shafts, or gear assemblies shall be measured and paid separately under relevant “Supply Only” items. (3) Any damage caused to the shutter or surrounding structure during execution shall be rectified by the contractor at his own cost. (4) Doors shall be handed over in smooth, safe, and fully functional condition to the satisfaction of Deptt.

Supply only 1.0 mm thick interlocking steel lath strips for manual / push-pull rolling shutters up to 12.0 sqm, including mild steel clips at both ends, complete all as specified and directed.

Supply only 1.25 mm thick interlocking steel lath strips for gear-operated rolling shutters up to 35.0 sqm, including mild steel clips at both ends, complete all as specified and directed.

Supply only mild steel spring, 75 mm to 150 mm dia, made of high tensile steel wire conforming to IS: 4454, having 60 to 80 helical turns for smooth working condition of rolling shutters, complete all as specified and directed.

Supply only mild steel anchoring rod, 50 mm dia, for rolling shutters, complete all as specified and directed.

Supply only bevel or chain gear assembly suitable for gear-operated rolling shutters, including crank handle, chain, bearings, and fixings, complete all as specified and directed.

Supply only mild steel rollers with suitable diameter, section, bearings, and locking pins for rolling shutters, complete all as specified and directed.

Supply only fabricated mild steel sheet hood/top cover for rolling shutters, 1.0 mm thick, cut and shaped to size with proper stiffening using angle/flat stiffeners at top and bottom edges, edges beaded or formed as required, suitable for fixing to bracket plates, complete as specified and directed by the Engineer-in-Charge.

Supply only fabricated mild steel lock plate (bottom lock plate / bottom rail) for steel rolling shutters, fabricated to suit the width of the existing shutter opening, of riveted construction, made out of mild steel sheet not less than 3.15 mm thick, reinforced at bottom with mild steel angle section not less than 35 × 35 × 5 mm, designed to be interlocked with the bottom-most lath of the curtain, complete with sliding bolts with arrangement for pad locking and mild steel pulling handles (one handle for widths up to 2.5 m and two handles for widths above 2.5 m, fixed on both interior and exterior faces), strictly conforming to SSR Part-I, 1991, Para 10.23.3, IS 6248 and relevant General Specifications, complete all as specified and directed.

M&L preparing new or previously untreated Steel and Iron Surfaces of rolling shutters or any individual parts, of any description, over 10 Cm width or girth and applying Two Coats of Synthetic Enamel Paint over a Red Oxide Zinc Chrome Primer, complete all as specified and directed.

M&L preparing old Treated/Painted Steel and Iron Surfaces of rolling shutters, of any description, over 10 Cm width or girth and applying One Coat of Synthetic Enamel Paint complete all as specified and directed.

REPAIRS TO MILD STEEL WORKS, TRUSS AND ROOFINGS

Dismantling of Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings and removal from site complete all as specified and as directed.

Dismantling wrought iron or mild steel work of any description and removing the same from site, complete all as specified and as directed.

Dismantling structural steel work including doors, gates but excluding framed truss etc. and removal from site complete all as specified and directed.

M&L for rolled mild steel sections as in main and cross beams, hip and jack rafters, purlins where connected to common rafters and running rails and guides for sliding doors, fixed with angle cleats or other connecting plates, including cutting, hoisting, fixing in position, drilling holes, welding, or bolting, Grade Fe-410-W (Gde-E 250) quality-A, complete all as specified and directed

M&L for structural steel work Fe-410-W (Gde E-250) Quality-A in roof trusses (framed), trussed purlins, crane gantries, rails and fastenings and heavy bracket framing (beam, tee, angle, channel or flat sections) including distance pieces, cleats etc., complete all as specified and as directed by the Engineer-in-Charge

M&L for steel work in tubular trusses including special shaped washer etc complete using ERW or induction butt welded tubes conforming to IS 1161-1979 grade St-240 or RHS/SHS Sections conforming to IS 4923:1997 grade YST 210 complete all as specified and directed.

M&L for Rolled mild steel in plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes without any attachment Gde Fe 410W complete all as specified and directed.

M&L for Mild steel screw bolts (machine made) with hexagonal or square heads at one end & screwed the other or screwed both ends each screwed end to be fitted with washers & one hexagonal or square nut, exc 22.5cm but n exc 30 cm long, diameter 16 to 20 mm complete all as specified and directed.

M&L for Rolled mild steel framed work, Fe-410W(Gde-E-250) quality-B as in doors or gates of angle or other section with gusset plates, rails, braces etc complete drilled for fixing of steel sheeting or other covering. Doors, etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering), running rails and guides) and hanging; also fastening and fixing complete all as specified and directed.

M&L for Mild steel plain black sheet, 1.00 mm thick, as in wall cladding, steel gates and similar work, cut to size, holes punched including round headed screws, clout nails or rivets and fised to steel framing with 40mm lap joints with riveted or welded seams including bending or turning up, mitred angles, etc as required complete all as specified and directed.

S&F pre-painted olive green colour galvalume aluminium-zinc coating, GI-based corrugated steel sheets, 0.50 mm thick, having minimum tensile strength 550 MPa, as in hangar roof covering / wall cladding, fixed with self-tapping screws or L/J-type hooks, including necessary laps, cuttings and waste, provided at any height up to 25 m, complete all as specified and as directed by the Engineer-in-Charge

S&F pre-painted olive green colour galvalume aluminium-zinc coating, GI-based plain steel sheets, 0.50 mm thick, having minimum tensile strength 550 MPa, as in roof covering / wall cladding / steel gates / ridge portion, including necessary bending, moulding and forming to required shapes, fixed with self-tapping screws, provided at any height up to 25 m, complete all as specified and as directed by the Engineer-in-Charge

M&L preparing new or previously untreated steel and iron surfaces of parking sheds, gates, grills, small roof members and similar works, of any description, over 10 cm width or girth, and applying two coats of synthetic enamel paint over a red oxide zinc chrome primer, including cleaning, surface preparation, tools, plants and all incidental works, complete all as specified and as directed by the Engineer-in-Charge

M&L for preparation of existing treated or painted steel and iron surfaces, of any description, over 10 cm width or girth, including surface cleaning and application of one coat of synthetic enamel paint, at a height up to 12 m, complete all as specified and directed by the Engineer-in-Charge.

M&L for preparation of existing treated or painted steel and iron surfaces, of any description, over 10 cm width or girth, including surface cleaning and application of one coat of synthetic enamel paint, at a height above 12 m and up to 25 m, complete all as specified and directed by the Engineer-in-Charge.

M&L preparing new or previously untreated steel and iron surfaces of roof trusses and associated structural members, of any description, over 10 cm width or girth, and applying two coats of synthetic enamel paint over a red oxide zinc chrome primer, including scaffolding/staging, working platforms, safety arrangements, surface preparation, tools, plants and all incidental works, at any height up to 25 metres, complete all as specified and as directed.

M&L for preparation of new corrugated, semi-corrugated, or plain steel surfaces of any description on sloped roofs or wall/cladding surfaces, over 10 cm width or girth, including surface cleaning, priming, and application of two coats of synthetic enamel paint (IN CAMOUFLAGE PATTERN), at a height up to 12 m, as per sample approved by the Engineer-in-Charge, complete all as specified and directed.

M&L for preparation of new corrugated, semi-corrugated, or plain steel surfaces of any description on sloped roofs or wall/cladding surfaces, over 10 cm width or girth, including surface cleaning, priming, and application of two coats of synthetic enamel paint (IN CAMOUFLAGE PATTERN), at a height above 12 m and up to 25 m, as per sample approved by the Engineer-in-Charge, complete all as specified and directed.

M&L for preparation of existing corrugated, semi-corrugated, or plain steel surfaces of any description on sloped roofs or wall/cladding surfaces, over 10 cm width or girth, including surface cleaning, priming if required, and application of one coat of synthetic enamel paint (IN CAMOUFLAGE PATTERN), at a height up to 12 m, as per sample approved by the Engineer-in-Charge, complete all as specified and directed.

M&L for preparation of existing corrugated, semi-corrugated, or plain steel surfaces of any description on sloped roofs or wall/cladding surfaces, over 10 cm width or girth, including surface cleaning, priming if required, and application of one coat of synthetic enamel paint (IN CAMOUFLAGE PATTERN), at a height above 12 m and up to 25 m, as per sample approved by the Engineer-in-Charge, complete all as specified and directed.

REPAIRS TO BRICKWORK, PLASTERING AND FINISHES

Taking down Cement Plaster including raking out Joints, hacking for Key, scrubbing down with Water and removing Debris, etc. to Outside MD/AF Land, complete all as specified and directed.

Demolition of Brick work built in Cement Mortar and in any Position including all Quoins, Arches and Pillars, etc. Incl removal of debris from site complete all as specified and directed.

M&L for Brick Work with Fly-Ash Bricks (Old Size Bricks), Straight or Curved on Plan exc. 6.0 Metre mean Radius, built in Cement Mortar 1:6, complete all as specified and directed.

M&L Brick work using Serviceable Bricks obtained from Item No. 4.02 here-in-before including removing old Mortar, Straight or Curved on Plan exc. 6.0 Metre mean Radius, built in cement mortar 1:6 complete all as specified and directed.

M&L for brickwork with sub class 'B' fly ash bricks, straight or curved on plan to any radius in half brick thick walls built in cement mortar 1:4 complete all as specified and directed.

M&L for Rendering (Internal) 12mm thick in cement mortar 1:6 on Brick Walls or on Concrete Surfaces, Plastered Surfaces finished Even and Smooth without using Extra Cement complete all as specified & directed.

M&L for preparing New/Undecorated Plastered Surfaces of Walls, applying a coat of suitable cement primer followed by a Coat of 2.0 mm thick Wall Putty (in two layers of 1mm thick) including rubbing down with Sand Paper to obtain a smooth finish surface and finishing with Two Coats of Acrylic Distemper (as approved) as per desired shade/tint complete all as specified and as directed.

M&L for 15 mm thick plastering in cement mortar 1:4, on external surfaces of brick/stone walls or concrete surfaces finished even and fair upto 4 storey height including necessary scaffloding complete all as specified and directed.

M&L preparing for old concrete/ plstered surfaces of any description over 10cm girth or width, not otherwise described applying two coats of Synthetic Enamel Paint over a coat of suitable Primer complete all as specified and directed by Engr-in-charge.

REPAIRS TO FLOORINGS, RCC SLABS ETC

Dismantling Floor, Paver Tiles, Hearth or Wall Tiling, etc. including Cement Mortar Bedding (but not backing) and removing debris, etc. to Outside MD/AF Land, complete all as specified and directed.

M&L for providing non-skid/matt finish Ceramic tiles, coloured, 7-8 mm thick (Square / rectangular), area of each tile exc 0.11 Sqm but not exceeding 0.18 Sqm in Flooring, set and jointed in Neat Cement Slurry and pointed in White or Colour Cement to match the tiles laid over and incl 15mm thick Screed or Screed Bed in Cement Mortar 1:4, complete all as specified and directed. NOTE : Cost of Cement Screed Bed shall deem to be included in the Quoted Unit Rate.

M&L for Coloured Glazed Ceramic Tiles in vertical surface 450mm X 350mm X 6-7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match the Tiles, laid over and including 10mm thick rendering as Screed or backing coat of wall tile in Cement Mortar 1:3, complete all as specified and directed. NOTE : Cost of Cement Screed Bed shall deem to be included in the Quoted Unit Rate.

M&L for Dismantling Stone Slabs and/or Tiles of any description or thickness in Floors, Aprons, etc. laid, bedded and pointed in Cement Mortar, removal of debris outside AF land, cleaning of area to remove dust, loose particles, washing with water complete all as specified and directed.

Demolition Cement Concrete (Reinforced) of kitchen slab, and similar work (reinforcement cut as required to facilitate demolition) and removing debris, etc. to Outside MOD Land, complete all as specified and directed.

M&L Reinforced Cement Concrete 1:2:4 type B0 (12.5mm graded stone aggregate) as in Shelves, Chajja, Facia, Sunshade and Similar Items and smooth finishing at Top side using extra Cement, complete all as specified and directed. (NOTE: MS reinforcement & Formwork shall be measured and paid seperately)

M&L for formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200 mm thick (horizontal or sloping) for rough finished surfaces complete all as specified and directed.

M&L for formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/ PCC bands in walls, horizontal or sloping and similar work exc 10cm but n exc 20cm wide for rough finished surfaces complete all as specified and directed

M&L TMT Bars 10mm dia and over, cut to length bent to shape required including cranking, bending spirally for hoping for Columns, hooking Ends and binding with and incl Mild Steel Wire (annealed) not less than 0.9mm dia or securing with Clips, complete all as specified and directed.

Demolition Cement Concrete (un-reinforced) of any description in Ground Floors, Pavings, etc. not exc. 150mm thickness (above or below Ground Level) and removing debris, etc. to Outside AF Land, complete all as specified and directed.

M&L for Cement Concrete 1:2:4 type B0 (12.5mm graded stone aggregate) as in Coping, Bed Plates, Holdfast, Bed Block, Kerb Stones including necessary Formwork and weathering, slightly rounded or chamfered angles and throating, complete all as specified and as directed.

REPAIRS TO JOINERY, CABINETS, GLAZING, BIRDPROOFING ETC

Taking down damaged / unserviceable Steel / Wooden Chowkat or Frame exc. 1.50 Sqm but not exc. 4.00 Sqm Each with shutter (without taking off shutter from the frame) and removal from site incl cutting holes in brickwork for removal of holdfasts complete all as specified and directed.

Taking down Shutters of any description exc 1.0 sqm and not exc 2.0 Sqm each, keeping aside for re-use or removal from site complete all as specified and directed.

M&L Cement Concrete 1:3:6 type C0 (12.5mm graded stone aggregate) as in Filling Back side of Chowkats and for filling holdfast holes in brickwork finished even and smooth complete all as specified and directed.

S&F sheet glass 4.8 mm thick, ordinary quality (or tinted, if specified), and glazing with oil putty/approved glazing compound in squares, exceeding 0.50 sqm in each pane, in windows, fixed ventilators, fixed steel sections over doors, including proprietary/NCL steel window and door systems, complete all as specified and as directed

S&F in repair scratch- and strain-free 18–19 mm thick PVC board (weight not less than 9 kg/m²) for kitchen cabinets (shelves, doors, etc.), laminated on one side, joints made using PVC solvent adhesive, and fixed with self-tapping aluminium screws. Includes providing and fixing stainless steel L-shaped hinges suitable for PVC board (minimum 2 per door leaf) to hold cabinet doors, and stainless steel silver-chrome door handles, 100 mm long (1 per door leaf), complete all as specified and directed. NOTE: Quoted unit rates are inclusive of PVC board, handles, hinges, screws, and all accessories.

Supply only of stainless steel horizontal mortice lock suitable for NCL make steel door, of approved make and specification, including all fasteners and fittings, complete all as specified and directed NOTE: Installation, fixing, alignment, testing and commissioning of the lock shall be deemed to be included in the connected item for taking down and refixing of NCL steel door shutter.

Supply only of moisture-proof, termite-resistant composite/PVC/phenolic resin board panel for bottom portion of NCL steel door shutter, minimum 10 mm thick (or as approved), including sealant, complete all as specified and directed. NOTE: (1) Fixing, sealing, finishing, alignment and commissioning shall be deemed included in the connected item for taking down and refixing of NCL steel door shutter. (2) Only the actual size of panel fixed in the shutter shall be measured and paid. No extra payment shall be made for wastage or cutting losses.

Supply only of 5–6 mm thick tinted glass panel for NCL steel door shutter of approved size, including glazing clips, rubber/neoprene packing and sealant, complete all as specified and directed NOTE: (1) Fixing, glazing, sealing, finishing, making good, alignment and commissioning shall be deemed included in the connected item for taking down and refixing of NCL steel door shutter. (2) Only the actual size of glass fixed in the shutter shall be measured and paid. No extra payment shall be made for wastage or cutting losses.

REPAIR TO PLUMBING AND SANITARY WORKS

Taking up or down water supply tubing, any type, 15/20mm bore (dia) with accessories, segregating Serviceable Pipes and Fittings/ Connections and keep in Safe Custody for re-use, complete all as specified and directed.

S&F Chlorinated Polyethylene Chloride (CPVC) pipes 20 mm outside dia, SDR-11, having thermal stability for hot and cold water supply incl all SDR-11 CPVC plain and brass threaded fittings (such as Bends, Elbows, Tees, Short Pieces, Connectors, Back - Nuts Caps, Plugs, Unions, Flange (core) & flange (ring), reduction Tee, reducing socket, Male & female threaded socket, tank connector etc) fixed/laying walls, ceilings or in floors etc. with suitable size MS clamp of spacing 1.00 mtr etc pipe line complete all as specified & directed.

-ditto- but with 25 mm outer dia size CPVC pipes

S&F in repair PVC (SWR) 75 mm floor trap plain with grating including jointing to waste pipe, fixed in cement concrete 1:2:4 (20 mm graded stone aggregates) complete all as specified and directed.

S&F in repairs PVC (SWR) 75mm OD Soil, Waste and Ventilating Pipe, single socketed, in any length with PVC Joints, with or without Ears, laid on floor, trench etc or fixed to Walls with PVC clips complete

S&F in repairs PVC (SWR) 110mm OD Soil, Waste and Ventilating Pipe, single socketed, in any length with PVC Joints, with or without Ears, laid on floor, trench etc or fixed to Walls with PVC clips complete.

S&F in repair PVC (SWR) 75mm OD, Bend any type, provided with Access Door, etc. and jointing with Solvent Cement, complete all as specified and directed.

S&F in repair PVC (SWR) 110mm OD, Bend any type, provided with Access Door, etc. and jointing with Solvent Cement, complete all as specified and directed.

S&F in repair stainless steel Grating Round 100mm dia with waste hole jointing with Solvent Cement complete all as specified and as directed.

S&F in repair brass chromium-plated urinal spreader, including connection to the existing push/angle cock using the existing connecting pipe, complete all as specified and directed.

S&F in repairs vitreous china wash down water closet pan (pedestal pattern), white, with 'P' or 'S' trap front or back inlet, fixing bolts (except flushing cistern and flush pipe) incl plastic water closet seat cover (white) and mild steel chromium plated or aluminium hinging device complete all as specified and directed.

S&F in repair chromium plated Hand shower (health faucet), ABS body with 1.2 metre long flexible tube in chrome finish with wall hook complete all as specified and directed.

S&F in repair Jet Spray with Connection Pipe 15mm bore (dia), Brass Chromium Plated and suitable for Wash Down Water Closet Pan (Pedestal Pattern) , complete all as specified and directed.

S&F in repair angle valve, 15 mm bore, cast copper alloy, chromium plated fancy type, concealed type with wall flange fixed to iron pipe complete all as specified and directed.

S&F in repair Chromium plated brass two way Angle valve, fancy type, concealed type with wall flange fixed to 15 mm bore of Iron pipe, complete all as specified and directed.

S&F in repairs, chromium plated brass Tubular towel rail, 20mm dia, 600 mm long between flanges including brass chromium plated brackets complete all as specified and directed.

S&F in repairs toilet paper holder, chromium plated, surface type with flap complete all as specified and directed.

S&F in repair Chromium plated brass Bib cock with wall flange, long body, fixed to 15 mm bore of Iron pipe complete all as specified and directed.

S&F in repair Chromium plated brass Pillar tap, with aerator, fixed to wash hand basin, complete all as specified and directed.

S&F in repair 15mm bore chromium plated single lever central hole basin mixer without popup waste system with 450mm long copper pipe and brass nut, complete all as specified and directed.

S&F in repair Stop Cock 15mm bore (dia), Cast Copper alloy, Chromium Plated, Fancy type with long Shank and Cup (Concealed type), screwed down, high pressure, with Crutch or Butter-fly Handle, screwed Both Ends for Iron Pipe or for Unions complete all as specified and directed.

S&F in repair PVC Connection Pipe 15mm size and 60 Cm in length with Adapter Nuts of PVC, complete all as specified and directed.

S&F in repairs for waste coupling chromium plated for sink / wash basin, suitable for 32mm dia waste pipe complete all as specified and directed. (NOTE: This item shall only be measured for replacement in existing sinks, basins etc)

S&F in repair PVC Waste Pipe 32mm bore (dia), 60-75 cm length, complete all as specified & directed. (NOTE: This item shall only be measured for replacement in existing sinks & basins)

M&L removal of accumulated silt/soil, along with grass, bushes, or vegetation, if any, from the beds of saucer drains, surface channels, and side open drains of BPs (up to 20 cm depth). Includes excavation and removal of material from the sides of the drain to a distance of 100 m from the site, complete as specified and directed. NOTE:- (1) Length of drain in running meters (RM) shall be measured for payment. (2) Rates for removal of grass, shrubs, or vegetation from inside the drain are included; no extra depth shall be measured for the height of vegetation removed.

M&L removal of accumulated silt/soil, along with grass, bushes, or vegetation, if any, from the entry and sides of BPs (depth of deposit up to 30 cm). Includes excavation and removal of material from the sides of the drain to a distance of 100 m from the site, complete as specified and directed. NOTE:- (1) Volume of soil (in cubic meters) shall be measured for payment. (2) Rates for removal of grass, shrubs, or vegetation are included; no extra depth shall be measured for the height of vegetation removed.

Please Enable Macros to View BoQ information