Repair renovation of Set No 06 New GOs block at PHC Qammerwari Srinagar

Amount

Dismantling of tile work in walls and floors including stacking of serviceable material and disposal of unserviceable material within 50 mtrs lead.

Dismantling of W C including P-trap, flushing cistern long bend etc and disposal of unserviceable material within 50 mtrs lead all complete

Demolishing of cement concrete manually/by mechanical means including disposal of material within 50 mtrs lead in 1:3:6 or richer mix.

Dismantling/ removing of old damaged PVC piles including taking out the pipes, manually including stacking of pipes within 50 mtrs lead (upto 150mm dia)

15mm cement plaster on rough side of single or half Brick wall / concrete wall of mix: 1:6 mix (1 cement : 6 fine sand) including all carriages and cost of materials involved.

Providing and laying in position cement concrete of specified grade including the cost of centering and shuttering. 1:3:6 (1Cement: 3 fine sand: 6 grade stone aggregate 20mm nominal size) including all carriages and cost of material involved.

Dismantling of cement concrete hollow blocks by manually/ mechanically means including disposal of unserviceable material all complete.

Dismantling of doors, windows, C/S windows (steel or wood) shutter including chowkhats, architrave, hold fasts etc complete and stacking with in 50 mts lead.(of area of 3 sq metres and below) including all carriages and cost of material involved.

Providing and fixing of wardrobe 2’-0” deep of approved design & make including shutters, partitioning with 19mm thick (water proof) ply board of approved make and quality including back covering of 6mm thick water proof ply and fixing 1mm thick mica of approved colour and make over the frame and shutter, as around including cost of all fixtures i.e. glazing, locking arrangements, handle etc. as per the directions of site Engineer. (complete Job)

Re-fixing of wooden chowkhat including resizing, fixing, hold fasts etc all complete.

Providing and fixing of 12mm thick imported wooden paneling (T&G) including cost of 12mm thick ply wood base, touch wood polishing and nails etc all complete as directed by EIC.

Providing and fixing of imported wall paper of approved make, design and pattern including preparing of base, fixing and all wastages complete as directed by EIC.

Providing and fixing of protective guard film of 20 micron thick of approved brand and manufacture to avoid scratches on glass with self tape complete, as directed by EIC.

Providing / fixing powder coated aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z- sections and other sections of approved make conforming to IS :733 and IS :1285, fixed with rawl plugs and screws or with fixing clips, or with expansion hold fasteners including necessary filling up of gaps at junctions, at top, bottom and sides with required PVC / neoprene felt etc. aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, aluminium snap beading for glazing / paneling, C. P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer in charge (including glazing and paneling)for shutters of doors, windows & ventilators including providing and fixing hinges / pivots and making provision for fixing of fittings wherever required including the cost of PVC / neoprene gasket required including all fittings complete.

Providing and fixing ceramic glazed floor tiles 300x300 mm or above (thickness to be specified by the manufactures) of Ist quality conforming to IS:13755 of NITCO, ORIENT, SOMANY, KAJARIA or equivalent make in colour such as white, ivory, grey, fume Red,brown laid on 20mm thick be bed of cement mortar 1:4 (1 cement :4 coarse sand) including pointing the joints with white cement and matching pigment etc. complete incl. all carriage and costs of material involved.

Providing / laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS :15622 of approved make in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement: 4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete. including all carriages and costs of material involved.

Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade (two or more coats) over and including priming coat with cement primer. Including all carriages and cost of material involved.

Providing and fixing of 8mm thick imported wooden flooring of approved make and colour including 2mm thick foam cushion including all cuttings and wastages complete.

Providing and fixing of 50x50mm imported laminated wooden cornice of approved make all complete.

Providing and fixing of PVC Pipes/ fittings of approved brand (Prince Type-B) including trenching and refilling all complete.

100mm Pipe

75mm Pipe

100mm plain bend

100mm Door Tee

100mm Collar

100mm Floor trap

40mm Pipe

40mm plain bend

Providing and fixing of C P fittings of approved brand and make (Parko, Kerovit, Hindware) or equivalent including all complete as directed by EIC.

Angle valve

C P Grating

PVC Connection 450mm long

Wall Mixer

W. C. one piece (Western) with PVC flushing cistern and all fixtures complete.

Providing and fixing of horizontal water heater Geyser of approved make like venus, jupiton, Racold or equivalent make including all necessary fittings complete.

Providing and fixing of PVC low level flushing cistern with manually controlled device (Handle lever) confirming to IS: 7231 with all fittings and fixtures complete (10 ltr capacity cloured).

M/S Ovais Umer U Din Wani