Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹36.5 LAccepted-AOC | ₹36.5 L Quoted ₹37.5 L | L1 | Accepted-AOC Being lowest bidder |
| 2 | L2₹37.9 L+₹44,909.10 (1.20%)Rejected-Finance VILL NANDA KA NAGLA DHAOLI AGRA 282001 | AGRA | AGRA | UTTAR PRADESH | 282001 | ₹37.9 L+₹44,909.10 (1.20%) | L2 | Rejected-Finance Being higher bidder |
| 3 | L3₹38.9 L+₹1.5 L (3.92%)Rejected-Finance DAULAT NAGAR SOHALLA ROAD AJIJPUR DHANOLI AGRA UP PIN 282001 | AGRA | UTTAR PRADESH | 282001 | ₹38.9 L+₹1.5 L (3.92%) | L3 | Rejected-Finance Being higher bidder |
| 4 | L4₹44.1 L+₹6.7 L (17.8%)Rejected-Finance A 201 BHAWAN ESTATE OPP KAMAYANI HOSPITAL SIKANDRA AGRA U P 282007 | AGRA | AGRA | UTTAR PRADESH | 282007 | ₹44.1 L+₹6.7 L (17.8%) | L4 | Rejected-Finance Being higher bidder |
| Sl No | Description | Qty | Unit | GIRENDRA SINGH AND CO L2 | Jain prem construction L4 | JEE JEE BUILDERS L1 | aman construction & general suppliers L3 |
|---|---|---|---|---|---|---|---|
| 1.00 | M&L for Bailing out, pumping out or otherwise removing all water with mechanical means from SWT and make it dry complete all as specified and directed by Engr-in-charge. | 25 | Each | 3,000 ₹75,000 | 800 ₹20,000 Lowest | 2,000 ₹50,000 | 2,000 ₹50,000 |
| 2.00 | M&L for cleaning / removing of sludge /soil /silt / humus of static water tank / UG Sump of any size and depth and make clean and disposing, removal of sludge at a distance not less than 50 m distance complete all as specified and directed by Engr-in-charge. | 25 | Each | 3,000 ₹75,000 | 800 ₹20,000 Lowest | 2,000 ₹50,000 | 3,000 ₹75,000 |
| 3.00 | Demolition of cement concrete (un-reinforced) in ground floor and paving n,exc 15 Cm thickness (below or above ground level) including removal of demolish material ouside of MOD land complete all as directed by Engineer-In-Charge. | 90 | Cum | 350 ₹31,500 | 120 ₹10,800 Lowest | 300 ₹27,000 | 250 ₹22,500 |
| 4.00 | M & L for Cement concrete work in pavement/hard-standing of flexural strength 40 kg/per square centimetre in field using not less than 400 kg of cement per cubic metre, thickness of concrete 25 cm or less complete all as specified. | 30 | Cum | 6,500 ₹1,95,000 | 5,500 ₹1,65,000 Lowest | 7,500 ₹2,25,000 | 6,500 ₹1,95,000 |
| 5.00 | M&L Broken stone or boulders hardcore of gauge not exceeding 63 mm, deposited, spread and levelled in layers not exceeding 15 cm thick, watered and rammed to a true surface complete all as specified and directed. | 30 | Cum | 400 ₹12,000 Lowest | 1,800 ₹54,000 | 1,400 ₹42,000 | 2,500 ₹75,000 |
| 6.00 | M&L for 75 mm thick PCC 1:3:6 type C-2 using 40 mm graded stone aggregates as in plinth protection, path /hardstanding /sub base etc and finished the concrete surface fair & even complete all as specified and directed | 400 | Sqm | 300 ₹1,20,000 | 225 ₹90,000 Lowest | 280 ₹1,12,000 | 320 ₹1,28,000 |
| 7.00 | M&L 75mm thick Cement concrete type B-0,1:2:4 (using 12.5 mm graded stone aggregates) in flooring and finished the surface even and smooth with out using extra cement complete all as specified and directed.. | 200 | Sqm | 400 ₹80,000 | 250 ₹50,000 Lowest | 320 ₹64,000 | 320 ₹64,000 |
| 8.00 | M&L for forming construction (Dummy) joint 65 mm deep 10 mm wide, filled with sealing compound grade 'A' complete all as specified and directed.. | 10 | X-Rm | 2,000 ₹20,000 | 1,000 ₹10,000 Lowest | 1,000 ₹10,000 Lowest | 1,000 ₹10,000 Lowest |
| 9.00 | M&L Clearing away all grass vegetation, saplings, shrubs, brushwood, undergrowth, roots, and trees not exceeding 30 cm girth (measured one metre above ground level) and removing rubbish upto a distance of 50 metres complete all as specified and directed. | 200 | Sqm | 50 ₹10,000 | 5 ₹1,000 Lowest | 10 ₹2,000 | 40 ₹8,000 |
| 10.00 | Dismantling mild steel or wrought iron work in framework, grill, gratings , railing etc and similar work complete all as directed | 5,000 | kg | 5 ₹25,000 Lowest | 5 ₹25,000 Lowest | 5 ₹25,000 Lowest | 15 ₹75,000 |
Tender Value
₹45 L
EMD Value
₹90,000
Closing Date
6 Nov 2025, 6:00 pmClosed
GE TECH AREA AGRA
Military Engineers Services Garrison Engineer (AF) Tech Area Agra - 282008
REPAIR / MAINT OF STATIC WATER TANK, UG SUMP, OHT AT VARIOUS LOCATION OF AGE B/R-I UNDER GE (AF) TECH AREA AT AF STATION AGRA
2025_MES_732622_1
8200-1751/E8
Open Tender
Civil Works - Others
Item Rate
180 days
AF TECH ATREA AGRA
Class D and above and category a(i)
8 documents required · 8 mandatory
₹500
Yes
GE TECH AREA AGRA
₹90,000
Yes
10 Dec 2025
15 Oct 2025
10 Nov 2025
15 Oct 2025
6 Nov 2025
30 Oct 2025
Amount
M&L for Bailing out, pumping out or otherwise removing all water with mechanical means from SWT and make it dry complete all as specified and directed by Engr-in-charge.
M&L for cleaning / removing of sludge /soil /silt / humus of static water tank / UG Sump of any size and depth and make clean and disposing, removal of sludge at a distance not less than 50 m distance complete all as specified and directed by Engr-in-charge.
Demolition of cement concrete (un-reinforced) in ground floor and paving n,exc 15 Cm thickness (below or above ground level) including removal of demolish material ouside of MOD land complete all as directed by Engineer-In-Charge.
M & L for Cement concrete work in pavement/hard-standing of flexural strength 40 kg/per square centimetre in field using not less than 400 kg of cement per cubic metre, thickness of concrete 25 cm or less complete all as specified.
M&L Broken stone or boulders hardcore of gauge not exceeding 63 mm, deposited, spread and levelled in layers not exceeding 15 cm thick, watered and rammed to a true surface complete all as specified and directed.
M&L for 75 mm thick PCC 1:3:6 type C-2 using 40 mm graded stone aggregates as in plinth protection, path /hardstanding /sub base etc and finished the concrete surface fair & even complete all as specified and directed
M&L 75mm thick Cement concrete type B-0,1:2:4 (using 12.5 mm graded stone aggregates) in flooring and finished the surface even and smooth with out using extra cement complete all as specified and directed..
M&L for forming construction (Dummy) joint 65 mm deep 10 mm wide, filled with sealing compound grade 'A' complete all as specified and directed..
M&L Clearing away all grass vegetation, saplings, shrubs, brushwood, undergrowth, roots, and trees not exceeding 30 cm girth (measured one metre above ground level) and removing rubbish upto a distance of 50 metres complete all as specified and directed.
Dismantling mild steel or wrought iron work in framework, grill, gratings , railing etc and similar work complete all as directed
S&F framed work such as grills gratings etc with ends of bars shouldered and / or riveted or forged into spiked framed guard bars barred iron doors ladders framed blasters walksays railings , framework of water tanks, Display Board and similar work conforming to Fe-290 complete all as specified and directed.
S&F in repairs Expanded metal / hard drawn steel wire febric of weight n. exceeding 4 Kg /sqm, cut to length, bent to shape required and tying with and including annealed mild steel wire not less than 0.9mm dia or fixing with galvanised steel staples complete to steel members complete all as specified.
S & F MS plain black sheet 1.00mm thick in hearths covering to doors shutters, Display board, chullah hood etc with plain 40mm lap joints or welded /riveted seams including bending, turning up, mitred angles etc. as required complete all as specified and directed.
Dismantling of posts, struts (wood, steel or RCC) any section including taking out embeded portion in concrete or brick masnory of any position place incl swan neck fencing and making good to disturbed portion all as specified and directed.
Excavating in post holes (or similar holes) each n. exc 0.5 cum getting out, in soft / loose soil, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, watering, and removing surplus soil to a distance n. exc 50m and making good surface complete all as specified and as directed.
M&L PCC 1:4:8 Type D 2 using 40mm graded stone aggregates as in foundation, filling, mass concrete complete all as specified and as directed.
M&L for mild steel work as in posts or struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire etc flat iron fillets (for securing wire mesh etc) including all necessary bolting or riveting and spot welding etc and similar work conforming to Fe-290 Gde E-165 complete all as specified and as directed.
S&F Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other to be fitted with washers and one hexagonal or square nuts, n. exc 5cm long , diameter of neck 5 to 10mm complete all as specified and as directed.
Supply only chain link fencing mild steel galvanised fencing any size and type (size of mesh and dia of wire as directed by Engg-in-charge) all as specified and as directed.
Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc including provision of binding wire complete all as specified and as directed.
S&F Mild steel round bars 10mm dia and over as in strengthning bars for chain link fencing conforming to Fe-290 Gde E-165 complete all as specified and as directed.
S&F in repair Galvanised, 2 strand, steel barbed wire 2.24 mm dia, barbed with 2 mm dia barbs at 75mm spacing and straining and fixing to any type of standard rails straining bolts, including securing or tying at crossing with and provision of galvanised mild steel wire, staples or steel pins, etc as directed (each line of wire to be measured) complete all as specified & directed by Engr-in-charge.
M&L painting to steel surfaces of any description over 10 cm width or girth with two coats of synthetic enamel paint over one coat of red oxide primer including preparation of untreated surface complete all as specified and directed
M&L applying one coat of synthetic enamel paint on old decorated steel surfaces of any description not exc 10 cm width or girth including preparation of surfaces, complete all as specified and directed.
Demolition of brick work or concrete surface built in cement mortar including all quoins, pillars, arches etc. but excluding ashlar facings, dressed stone work and precast concrete articles, complete all as specified and as directed.
M & L for brickwork with subclass `B' bricks (using old size bricks) , straight or curved on plan exc 6m mean radius, built in CM 1: 6 complete all as specified and as directed.
M&L for Providing cement concrete type B-1, 1:2:4 (using 20mm graded stone aggregates) as in copings, bed plates, kerbs etc including weathering, slightly rounded or chamfered angles and throating including necessary form work complete all as specified and as directed.
Taking down cement or cement lime plaster on brick or stone and concrete Base/wall etc including raking out joints, hacking for key, scrubbing down with water etc in any description all as directed.
M&L for rendering 15mm thick in CM 1:4 mixed with water proofing compound @ 3% by wt of cement or as per manufacturer's instructions on fair faces of brick work or concrete surfaces and finish the surface even and smooth without using extra cement including recron fiber and after plastering two coats of hydrobond complete all as specified and as directed by Engineer-In-Charge. (WPC,Recron fiber and brushbond ultraflex shall be measured and paid separately) NOTE:-work to be carried out upto ht of UG sump /OHT with necessary MS scaffolding including all other safety precautions.
Supply only of integral water proofing compound confirming to IS-2465-1075 all complete and all as specified .
M&L for preparation of new plastered surfaces and applying two coats of exterior emulsion paint with one coat of primer in normal pattern as per manufacturers instructions etc complete all as specified and directed by Engr-in-charge. Note:- finishing coat shall be done through roller only.
M&L for preparation of old surfaces and applying one coats of exterior emulsion paint with one coat of primer in normal pattern as per manufacturers instructions etc complete all as specified and directed by Engr-in-charge. Note:- finishing coat shall be done through roller only.
Supply only polyester non circular/trangular fiber 12mm long with circum circle dia meter 30-35 micron designed for melting point of 240 to 250 degree centigrade and having specific gravity of 1.34 to 1.4 complete all as spfd and directed.
M&L for brushbond ultraflex to provide of two coats seamless elastometric waterproof membrane for water tightness as per manufacturers instructions etc complete all as specified and directed by Engr-in-charge.
M&L for 100mm thick PCC(1:3:6) type C2 using 40mm graded stone aggregates as in sub base of floor etc complete all as specified and as directed.
M&L for 50 mm thick sand cushioning laid dry to the profile under interlocking block complete all as specified and as directed.
M&L for machine pressed precast concrete interlocking paver block of approved shape and size of 60mm thickness of minimum (M-35 grade) without correction factor for chamfering, made in rubber moulds with 0.50mm thick scratch proof lacquer coating on top surface, with white cement and pigment complete all as specified and directed.
M&L for Chequered cement concrete tiles 25mm thick, area of each tile exceeding 0.05 sqm but not exceeding 0.09 sqm, set jointed and pointed in neat cement slurry with mixture of white cement and pigment in floors, laid over and including screed bed or bedding layer of 15mm thick cement mortar 1:6 complete all as specified & directed
Dismantling floor, hearth or wall tiling including cement mortar bedding and removing rubbish off the premises complete all as specified and as directed
M&L for glazed ceramic coloured tiles 300x450x 7mm thick as in dado with and including 10mm thick rendering for bedding layer in CM 1:4, set and jointed in neat cement slurry and pointed with white cement complete all as specified and as directed.
M&L gunniting (NOZZEL/NORMAL) to RCC works in wall, column ,beams, slabs, landing, balconies etc by removing loose concrete including plaster cleaning of surfaces with wire brushes and applying epoxy/ SBR latex, paint anti corrosive coating of minimum 40-50 microns thick to rusted steel reinforcement after removing/ cleaning all rust by sand / grit blasting and fixing welded steel wire mesh 50 mm x 50 mm with 3mm dia steel wire as facias / drops and similar works etc and expoxy based or other equivalent mixing @ 2% by weight of cement polycrete and providing gunniting with a minimum pressure of 2.5 Kg/sqcm and applying 25mm thick layers of gunniting in cement mortar (1:2) using ordinary port land cement of 43 grade over wherever required complete all as specified and directed. Note:- (i) After placing the additionnal reinforcement all concrete surface shall be throughly scrubbing with brushed washed with water and allow dry and plaster complete all as specified. (ii) Work to be carried out as in patches as directed by Engr-in-charge. (iii) Rate for scaffolding ,15mm thick plaster in CM 1:4 including recron fiber and two coats of hydrobond and TMT bars (where applicable) deemed to be included in quoated rate. (iv) preparation of surface and applying two coat of OBD with wall care putty if required,deemed to be included in this item. (v) work to be carried out upto ht of OHT with necessary MS scaffolding including all other safety precautions.
S & F Wire netting (size of mesh 50x50mm) of stainless steel (304 grade) wire 3mm dia fixed with self tapping screws & washer according to mesh aperture fixing at ht of OHT etc including necessary scaffolding complete all as specified and directed
S & F CRACK POWDER (SEAL COMPOUND) suitable bonding against treatment to be carried out on old concrete surface with Sikadur 32 of Sika. Nito bond , ZINK PRIMER of fosroc or equivalent (as per manufacturers instruction) to bond old and new concrete at ht of OHT etc including necessary scaffoldingcomplete all as specified and directed
GIRENDRA SINGH AND CO (BID ID -3473730)
aman construction & general suppliers (BID ID -3468583)
Jain prem construction (BID ID -3468810)
stage.html
html • 0.05 MB
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.50 MB
BOQ_823394.xls
BOQ • 4.07 MB
1751Tender.pdf
Tender Documents • 1.56 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .