WBPWD/EEKIT/E-NIT-078/T/3rd call

Amount

SITC of Networking Horizontal Un- Armoured Cable, 1000Base-T (Gigabit Ethernet), 100Base-T (Fast Ethernet), 10Base-T (Ethernet), 1-250 MHz (Minimum), Category 6, 4-Pair, U/UTP, 23 AWG solid bare copper conductors with FEP insulation,polyester separator, LSZH OUTER sheath COVER as to standard of ISO/IEC 11801Ed. 2.0, EN 50173-1 and TIA/EIA 568C, Make: R&M, Legrand, Tyco, Comscope, Molex, derwiser Warranty: 03 (Three) years onsite comprehensive OEM warranty with parts and service except force majeure.

SITC of I/O port adpater RJ45 with GI box and Single face cover plate etc Make: R&M, Legrand, Tyco, Comscope, Molex, derwiser Warranty: 03 (Three) years onsite comprehensive OEM warranty with parts and service except force majeure.

SITC of PATCH CHORD Category 6 4-Pair, SF/UTP, Horizontal cable, 23 AWG solid bare copper conductors WITH RJ45 CONNECTOR AT BOTH END 1 MTR LENGTH, Make: R&M, Legrand, Tyco, Comscope, Molex, derwiser Warranty: 03 (Three) years onsite comprehensive OEM warranty with parts and service except force majeure.

SITC of PATCH CHORD Category 6 4-Pair, SF/UTP, Horizontal cable, 23 AWG solid bare copper conductors WITH RJ45 CONNECTOR AT BOTH END 2 MTR LENGTH, Make: R&M, Legrand, Tyco, Comscope, Molex, derwiser Warranty: 03 (Three) years onsite comprehensive OEM warranty with parts and service except force majeure.

SITC of: STQC certified Enabled Biometric Device with the following Configuration: Fingerprint Sensor : Optical (Scratch Free Sensor Surface); Image Resolution: 500 DPI / 256 Gray; Sensing Area: 15 x 17 mm; FAP: FAP10; Fingerprint and with Touch Screen, i and IP65 Ratings, RF Card based Door Controller support, Support EM Prox, IP65 and Interfaces Such as USB, Door Lock, Door Sense, Exit Reader, Exit Switch; Display: 7 inch TFT LCD or higher; Processor: 1.5 GHz Quad Core, 64bit; RAM: 2GB RAM; Memory: 16GB with Expandable up to 32GB included; WiFi: 802.11 b/g/n 2.4GHz; Bluetooth: Bluetooth 4.2 or higher; SIM Slot: Dual SIM Card or 4G/5G USB Dongle; GPS: GPS/AGPS; Battery: 4000 mAh; Certification: ISO Compatible Fingerprint Templates and Images ANSI Compatible Fingerprint Templates and Images 500 DPI STQC/Aadhaar Approved Fingerprint Sensor CE, IEC60950, RoHS Certified Fingerprint Sensor; Connectivity: GPRS/EDGE Enabled, 2G, 3G, 4G, GPS; Acceptance and Rejection Rate: Lower FRR and FAR; Display Resolution: 1024 x 600 Pixels; Audio Jack: Yes; Ports: Micro USB v2.0 Port - 1nos. (With OTG Support) or One Micro USB v2.0 Port & One Round Pin Charger Connector; If the internet/MPLS link failure storage of attendance in the local controller and push the DATA to central server automatically when the services are restored. The controller should be having 500000 event storage capacity. The communication between software and Controller should be on controller MAC ID synchronization. The controller should be IK06 , IP65, The controller should have inbuilt interface for smart card and should be able to enrol finger and smart card from the controller directly. The controller should communicate with Central server over LAN, MPLS and Internet automatically. The controller should have inbuilt contactless smart card interface. The Controller should have inbuilt 3.5" capacitive Touch Screen and should pop up Photo while employees use the controller for attendance punch, The controller should be IK06, IP65 and should have inbuilt USB port. The controller should have inbuilt POE interface as well as external power source. The controller should have in built battery backup with minimum 2 hrs power support. The controller should support 9600 fingerprint in 1:N mode and 100000 fingerprint in 1:1 mode . Template per user 30 and card per user 30. The Controller should have Protective box to Protect controller from external tampering. Including protective box, battery backup (2200mAh, 3.7V) and [03(three) years subscription of 4G/5G SIM or 4G/5G USB Dongle with data of 2Gb/day]. The device should be CE, FCC, UL, ROHS 16, BIS certified. Make: Mantra, Tyco, Matrix, Honeywell, Hikvision, Warranty: 03 (Three) years onsite comprehensive OEM warranty with parts and service except force majeure.

SITC & Laying of PVC conduits(ISI marked) / floor channel laying through surface with all accessories as required for the entire system with all OEM accessories. (Quality: MMS; Ø=25mm) Make: Precision, Presto Plast, Supreme, Quality : ISI Warranty: 03 (Three) years onsite comprehensive OEM warranty with parts and service except force majeure.

ADD GST @18%

Labour Welfare Cess @1%

SSML AUTOMATION PRIVATE LIMITED (BID ID -5623353)

Technical Services (BID ID -5635477)