A/R M/O PWD Rest House at Sujanpur Distt. Hamirpur (HP).

Amount

Demolition of brick work above G.L. upto all floor level including stacking of serviceable materials and disposal of un-serviceable materials within all lead and lifts in cement mortar as per the direction of Engineer-in-Charge and carriage of material within all leads and lifts and other incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Dismantling roofing including ridges, hips, valleys, gutters etc. stacking the serviceable materials and disposal of un-serviceable materials within all leads.G.I. Sheet roofing, as per the direction of Engineer-in-Charge and carriage of material within all leads and lifts and other incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Dismantling ballies in posts, purlins or rafters including stacking the materials with in all leads as per the direction of Engineer-in-Charge and carriage of material within all leads and lifts and other incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Dismantling cement asbestos celotax/hard board in ceiling or partition wall including stacking of serviceable materials and disposal of un-serviceable materials within all leads (Frame work such as joists, beams to be measured and paid for separately),as per the direction of Engineer-in-Charge and carriage of material within all leads and lifts and other incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Square rubble masonry coursed with hard stone of approved quality in super structure above all floor level,as per the direction of Engineer-in-Charge and carriage of material within all leads and lifts and other incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing form work with steel plates 3.15mm.( three point fifteen millimetre) thick welded with angle iron in frame 30x30x5mm. so as to give a fair finish including centring, shuuterings,strutting and propping etc.with wooden battens and ballies,from all height of propping and centring below supporting floor to ceiling and removal of the same for insitu-reinforced concrete and plain concrete work in:(i) Vertical surfaces such as walls (any thickness) partitions and the like including attached pillasters buttresses, plinth and string courses and the like, as per the direction of Engineer-in-Charge and carriage of material within all leads and lifts and other incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and laying cement concrete work mechanical mixed and vibrated crushed 1:2:4 (one Cement:two Sand:four graded stone aggregate 20 mm( twenty millimeter nominal size) and curing complete excluding cost of form work and reinforcement for reinforced concrete work in :Suspended Floor roofs, landing and shelves and their support balconies,beams,girders,bressumers and cantilever upto all floor level, as per the direction of Engineer-in-Charge and carriage of material within all leads and lifts and other incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing Tor steel reinforcement (made of Tata/Sail) for R.C.C. work including bending, binding and placing in position complete upto all floor level : Tor steel, as per the direction of Engineer-in-Charge and carriage of material within all leads and lifts and other incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Repairs to plaster in patches of 2.50 Sq.M.( two point fifty square metre) and under and 10 to 15mm ( ten to fifteen millimetre) thick including cutting the patch in proper shape and replastering the surface of the wall including disposal of rubbish to the dumping ground within all leads with, as per the direction of Engineer-in-Charge and carriage of material within all leads and lifts and other incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Pointing on square rubble,coursed or un-coursed stone masonry with cement mortar 1:3(1 cement:3 Sand) (a) Flush pointing, as per the direction of Engineer-in-Charge and carriage of material within all leads and lifts and other incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Supplying and fixing glass panes with putty and nails including removal of broken glass panes wherever necessary (i) plain Glass 5.5mm (five point five millimetre) thick, as per the direction of Engineer-in-Charge and carriage of material within all leads and lifts and other incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Steel work made of Tata/sail make welded in built up sections,trusses and framed work,including cutting ,hoisting ,fixing in position and applying a priming coat of red lead paint.In beams joists channels ,angles , tee ,flats with connecting plates or angle cleats as in main and cross beams,hip and jack rafters,purlins connected to common rafters and the like, as per the direction of Engineer-in-Charge and carriage of material within all leads and lifts and other incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing 0.60mm (zero point six zero millimetre) thick prepainted steel sheet in roofing (made of Tata durasuna) with hot dipped metallic zinc coated sheet with top coat of regular modified polyster (RNP) organic coating of 20 (twenty) microns over 5 (five) microns primer coating to back coat of polyster of 5 (five) microns over 5 microns primer coating including fixing with prepainted iron J or L hooks, bolts and nuts 6mm (six millimetre) dia metre with prepainted limpet and rubber washers complete with all accesoriees as required, as per the direction of Engineer-in-Charge and carriage of material within all leads and lifts and other incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing ridges or hips 60 cm (sixty centimetre) overall with 0.60mm( zero point six zero millimetre) thick prepainted steel sheets Tata/durasuna in roofing with hot dipped metalic zinc coated sheets with top coat of regular modified polyster organic coating of 20 (twenty) microns over 5 (five) microns primer coating + back coat of polyster of 5 (five) microns over 5 (five) microns primer coating including fixing with prepainted iron J or L hooks, bolts and nuts 6mm (six millimetre) dia and prepainted G.I. limpet and bitumen washers complete with all accessories as required, as per the direction of Engineer-in-Charge and carriage of material within all leads and lifts and other incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing valley 60 cm (sixty centimetre) overall 0.60mm (zero point six zero millimetre) thick prepainted steel sheet Tata/durasuna in roofing with hot dipped metalic zinc coated sheet with top coat of regular modified polyster organic coating of back coat of polyster of 5 (five( microns over 5 (five) microns primer coating i/c fixing with prepainted iron J or L hooks, bolts and nuts 6mm (six millimetre) dia with prepainted G.I. limpet and bitumen washers complete with all accessories as required, as per the direction of Engineer-in-Charge and carriage of material within all leads and lifts and other incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing M.S. BP Sheet 1.66mm to 2mm (one point six six millimetre into two millimetre) thick in eaves board/facia/soffits/ceiling including cutting, fixing and welding to steel roof members and applying a coat of red lead primer complete as per the instruction of Engineer-in-charge (Base members of steel work shall be measured and paid separtely), as per the direction of Engineer-in-Charge and carriage of material within all leads and lifts and other incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing G.I. clip in metal ceiling system of 600x600mm ( six hundred into six hundred millimetre) module which includes providing and fixing 'C' wall angle of size 20x30x20mm (twenty into thirty into twenty millimetre) made of 0.5mm (zero point five millimetre) thick pre painted steel along the perimeter of the room with help of nylon sleeves and wooden screws at 300mm (three hundred millimetre) center to centre, suspending the main C carrier of size 10x38x10mm ( ten into thirty eight into ten millimetre) made of G.I. steel 0.7mm (zero point seven millimetre) thick from the soffit with help of soffit cleat 37x27x25x1.6mm, (thirty seven into twenty seven into twenty five into one point six millimetre) rawl plugs of size 38x12mm (thirty eight into twelve millimetre) and C carrier suspension clip and main carrier bracket at 1000mm (one thousand millimetre) c/c. Inverted triangle shaped spring Tee having height of 24mm (twenty four millimetre) and width of 34mm (thirty four millimetre) made of GI steel 0.45mm (zero point four five millimetre) thick is then fixed to the main C carrier and in direction perpendicular to it at 600mm centers with help of suspension brackets. Wherver the main C carrier and spring T have to join, C carrier and spring T connectors have to be used. All sections to be galvanized @ 120gms/sqm (both side inclusive), fixing with clip in tiles into spring T with : GI metal ceiling clip in plain Beveled edge global white color tiles of size 600x600 (six hundred into six hundred and 0.5mm (zero point five millimetre) thick with 25mm (twenty five millimetre) height, made of G I sheet having galvanizing of 100gms/sqm (both sides inclusive) and electro statically polyester powder coated of thickness 60 microns (minimum), including factory painted after bending,as per the direction of Engineer-in-Charge and carriage of material within all leads and lifts and other incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Painting two coats (excluding priming coat on new steel and other metal surfaces with enamel paint i.e. made of Asian paints Nerolac (DULUX) brushing to give an even shade including cleaning the surface of all dirt,dust and other foregin matters Enamel paint other than white, as per the direction of Engineer-in-Charge and carriage of material within all leads and lifts and other incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Distempering (two coats) with oil bound (made of Asian paints/Nerolac DULUX) washable distemper of approved brand and manufacture and of required shade on undecorated wall surfaces to give an even shade over and including a priming coat with distemper primer of approved brand and manufacture after thoroughly brushing the surface free from mortar droppings and other foreign matter and also including preparing the surface even and sand papered smooth.Priming coat with distemper primer, as per the direction of Engineer-in-Charge and carriage of material within all leads and lifts and other incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing gola in lime concrete with 25 mm nominal size stone/ brick aggregate and 50%of lime mortar 1:2 (one lime putty :two surkhi ) underthe drip course and finished with lime plaster 1:2 (one lime putty:two surkhi ) complete. as per the direction of Engineer-in-Charge and carriage of material within all leads and lifts and other incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing 10mm ( ten millimetre) thick anti skid water proof stain and impect resistent heavy duty vetrified tiles Nitco or Kajaria 600x600mmx10mm (six hundred into six hundred millimetre into ten millimetre) manufactured of approved shade and colour in flooring, treads of steps and landings laid over 12mm (twelve millimetre) thick cement mortar 1:3 (one cement : three sand) jointed with cement slurry mixed with pigment to match the shade of tiles as required complete, as per the direction of Engineer-in-Charge and carriage of material within all leads and lifts and other incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing M.S.round holding down or anchor bolts with nuts and washer plates complete,as per the direction of Engineer-in-Charge and carriage of material within all leads and lifts and other incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing plastic seat (solid/hollow type) and cover made of Cera/Hundwire for wash basin water closed with C.P. brass hings and rubber butters hollow type (a) black and white plastic seat and cover), as per the direction of Engineer-in-Charge and carriage of material within all leads and lifts and other incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing vitrecus china wash basin made of Hundwire/Cera/quality 550x400mm (five hundred fifty into four hundred millimetre) with single hole pillar tap with CI or MS brackets plained white including cutting holes and making good the same but including fitting, as per the direction of Engineer-in-Charge and carriage of material within all leads and lifts and other incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing C.P. brass bib tap made of Jaquar/essess capastain head 15mm (fifteen millimetre) dia,as per the direction of Engineer-in-Charge and carriage of material within all leads and lifts and other incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing floor galvanized M.S. tube make (medium grade) made of Tata tube fitting and clamps including making good the wall and floors (i) 15mm (fifteen millimetre) dia, as per the direction of Engineer-in-Charge and carriage of material within all leads and lifts and other incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing poly thened water storage tank made of suntex triple layer of 1000ltr. (one thousand litre) capacity double layer of sintex G.I. inlet and outlet connection .155 nominal bore ball valve and mosquito proof PVC corner with locking arrangement including hoisting upto all heights above ground level, as per the direction of Engineer-in-Charge and carriage of material within all leads and lifts and other incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing C.P. brass waste for wash basin or sink made of Dianmd 32mm (thirty two millimetre), as per the direction of Engineer-in-Charge and carriage of material within all leads and lifts and other incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing 600x450mm (six hundred into four hundred fifty millimetre) bevelled edge mirror made of Atul/Modi guard of superior glass mainted on 6mm (six millimetre) thick A.C. sheet or ply wood sheet fixed to wooden plugs with C.P. brass screws and washer, as per the direction of Engineer-in-Charge and carriage of material within all leads and lifts and other incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing C.P. brass angle valve made of Jaquar/essess 15mm (fifteen millimetre) with out nuts and pipes, as per the direction of Engineer-in-Charge and carriage of material within all leads and lifts and other incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Dinesh Thakur