NIT No. :- 03/IGIMS/Engg.Cell /CW &EW/2026-27 gr 06

Dismantling doors windows and clerestory windows (steel or wood) shutters including chowkhats, architrage, holdfasts etc. complete and stacking within 50 m lead.,

Dismantling tile work floor and roofs laid in cement mortar including stacking meterial within 50 metres lead.

Dismantling of flushing cistern of any size including stacking of useful materials near the site and disposal of unserviceable materials within 50 metres lead.

Providing designation 100 A one brick flat soling joints filled with local sand including cost of watering, taxes, royalty all complete as per building specification and direction of E/l,

Providing and laying in position cement concrete of specified grade exluding the cost of centring and shuttering-all work upto plinth level.

Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centring,shuttering,finishing and reinforcement-All work puto plinth level

Reinforcement for R.C.C. work including straightening,C10cutting, bending, placing in position and binding all complete.

Centring and shuttering including strutting,propping etc. and removal of form for.

Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 Sqm and under including cutting the patch in proper ing and plastering the surface of the walls complete including disposal of rubbish to the dumping ground within 50 metres lead.

Removing dry or oil bound distemper by scrapping, sand paper and preparing the surface smooth including necessary repair scratches tec. Complete

Distempering with oil bound washa ble Distemper of approved brand and manufacture to give an even shade .Old work (one or more coats)

Applying one coat of distemper primer of approved brand and manufacture on wall surface:Distemper primer

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade:One or more coats on old work

Providing and laying vitrifed floor tiles in different sizes {thickness to be specified by the manufactruer) with water absorption's less than 0.08 % and conforming to IS : 15622 of approved make in all colours and shades, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand ) including grouting the joint with white cement and matching pigments etc.complete.Size of Tile 600x600 mm.

Deduct for not using 20 mm thick cement mortar 1:4 (1 cement : 4 coarse sand) bedding in laying of floor tiles.

Fixing glazed/ Ceramic/ Vitrified floor tiles with cement based high polymer modified quick-set tile adhesive (Water based) conforming to IS: 15477, in average 3mm thickness.

Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations, of required size,approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1cement : 4coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups,including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels.granite

Providing sal wood work in frame of doors(choukhats) and fixed in position.

Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type,core of block board construction with frame of 1 st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters:

Extra for providing lipping with 2nd class teak wood battens 25 mm minimum depth on all edges of shutters (overall area of door shutter to be measured)

Providing and fixing anodised aluminium work for doors,windows, ventilator and partitions with extruded built up standard tubular and otner sections of approved make conforming to IS : 733 and IS : 1285,anodised trasparent or dyed to required shade according to IS : 1868, (Minimum anodic coating of grade AC 15), fixed with .rawl plugs and screws or with fixing clips , or with expansion hold fastners including necessary filling up of gaps at junctions, at top,bottom and sides with required PVC/neoprene felt etc.Aluminium sections shall be smooth, rust fre straight, mitred and jointed mechanically wherever required including cleat angle,Aluminium snap beading tor glazing/paneling, C.P. brass/stainless steel screws, all complete as per architecttural drawings and the directions of Engineer-in-charge. (GlazingFor fixed portion and panelling to be paid for separately

Providing and fixing fly proof stainless steel grade 304 wire gauge, to windows and clerestory windows using wire gauge with average width of aperture 1.4 mm in both directions with wire of dia 0.50 mm all complete.

Providing sal wood work in frame of doors(choukhats) and fixed in position.

Providing and laying Ceramic glazed floor tiles 300x300 mm (thickness to be specified by the manufacturer) of 1 st quality conforming to IS : 13755 of NITCO , ORIENT , SOMANY , KAJARIA or equivalent make in colours such as white , Ivory , Grey , Fume , Red , Brown , laid on 20 mm thick cement motar 1:4 (1 cement: 4 Coarse sand) including grouting the joints with white cement and matching pigments etc, complete.

Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS : 15622 (Thickness to be specified by the manufacture) of approved make in all colours, shades except burgundy , bottle green , black of any size as approved by Engineer-in-charge in skirting , risers of steps and dados over 12 mm thick bed of cement Motar 1:3(1 cement: 3 coarse sand ) and jointing with grey cement slurry @ 3.3 kg per sqm including pointing in white cement mixed with pigment of matching shade complete.

Providing and fixing M.S. grills of requirement pattern in frames of windows etc. with M.S. flats, square or round bars etc.all completeFixed to steel windows by welding

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the.

Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps,32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever requireWhite Vitreous China Wash basin size 630x450 mm with a single 15 mm C.P. brass pillar tap

Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :

Providing and fixing G.I. Union in existing G.I. pipe line, cutting and threading the pipe and making long screws,including excavation,refilling the earth or cutting of wall and making good the same complete wherever required :

supply and fixing bright finished brass hangging type floor door stopper with necessry screws etc complete.

Providing and fixing PTMT grating of approved quality and colour.Circular type125 mm nominal dia with 25 mm waste hole.

Providing and fixing PTMT soap Dish Holder having length of 138mm,breadth 102mm, height of 75mm with concealed fitting arrangements, weighing not less than 106 gms

Providing and fixing 600x450 mm beveled edge mirror of superior glass(of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete

Providing and fixing alluminium sliding door bolt anodised(anodic coating not less than grade AC 10 as per IS :1868) transparent or dyed to required colour and shade with nuts and screws etc. complete: 250x 16 mm

Providing and fixing alluminium sliding tower bolt anodised(anodic coating not less than grade AC 10 as per IS :1868) transparent or dyed to required colour and shade with nuts and screws etc. complete:

Providing and fixing alluminium handles anodised (anodic coating not less than grade AC 10 as per IS :1868) transparent or dyed to required colour and shade with necessary screws etc. complete100mm

Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS : 13983 with C.I. brackets and stainless steel plug 40 mm,including painting of fittings and brackets, cutting and making good the walls wherever required :

Supplying chemical emulsion in sealed containers including delivery as specified.

Diluting and injecting chemical emulsion for POSTCONSTRUCTIONAL anti-termites' treatrnent(including the cost of chemical emulsion)

Providing and fixing bright finished brass handles with screws etc. complete:

Providing and fixing magnetic catcher of approved quality in cupboard / ward robe shutters, including fixing with necessary screws etc. Complete

Providing and fixing powder coated telescopic drawer channels 300 mm long with necessary screws etc. complete as per directions of Engineer-in-charge.

Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete:

Providing and fixing chromium plated brass butt hinges with necessary chromium plated brass screws etc. complete.

Providing and fixing factory made Fiber glass Reinforced plastics (F.R.P.) chajja 4 mm thick of required colour, size and design made by Resin Transfer Moulding (RTM) Machine Technology, resulting in void free compact laminate in single piece, having smooth gradual slope curvature for easy drainage of water and duly reinforced by 2 nos vertically and 1nos horizontally 50x2 mm thick M.S. flat with 12 mm in built hole for grouting on the existing wall along with the 50 mm flanges duly inserted and sealed in the wall complete in one single piece casted monolithically, including all necessary fittings. The FRP Chajja should be manufactured using unsaturated olyester resin as per IS : 6746, duly reinforced with fibre glass chopped strand mat (CSM) as per IS : 11551 complete with protective Gel coat U/V coating on Top for complete resistance from the extreme of temperature, weather & sunlight.

Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid board one side white colour and other side of board laminated with PVC foil of minimum 14 micron thickness of approved design pasted with hot melt adhesive for cup boards, work stations and bathroom/kitchen cabinet etc. of required sizes comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ icehusk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm, modulus of elasticity 850 N/mm and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel piano hinges/soft close clip on concealed hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In• Charge. (Note: stainless steel piano hinges/soft close clip on concealed hinges and necessary S.S screws shall be paid separately)

Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid plain white color board for backing of cup boards and bathroom/kitchen cabinets etc. of required size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/mrice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm, modulus of elasticity850 N/mm and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel screws etc. all as per direction of Engineer-In- Charge. (Note: stainless steel screws shall be paid separately)

Providing & Fixing decorative high pressure laminated sheet of plain/ wood grain in gloss / matt / suede finish with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS : 2046 Type S, including cost of adhesive of approved quality

Providing and fixing glazing in alumnum door, window,Ventilator shutter and partition etc.with EPDM rubber/neoprene gasket etc. Complete as per the architectural drawings and the direction of engineering-in-charge.(cost of alluminium snap beading shall be paid in basic item.)

Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required :

Sone Sand (45 km from Koelwar)

Stone Aggregate ,(156 Km From Domchch, Koderma

Bricks (7P+ 1K)

Difference of Cost of Bricks

Difference of Cost of Cement

Providing and fixing 19mm thick Centutuary/Green ply of approved brand. For cup-board , ward robe , partition / panelling Etc. All complete as per archiectural drawings and directions of engineer-incharge

Providing and Fixing Angular Stop Cock with wall flange all Complete. Jaguar Model FLR-5053N or equavalent.

Providing and Fixing Pillar Cock Auto Closing System with 65 mm extension body all Complete. Jaguar Model PRS-031L65 or equavalent.

Providing and Fixing shower with arm all complete. Arm size 300mm long 6'' overhead shower.Make-Prayag cat no-BS-79S or equavalent.

Providing and Fixing Two way angle Cock with flange all Complete. PRAYAG Model no-PIS-11 H or equavalent.

Providing and Fixing Bib Cock with wall flange all complete. Jaguar Model CON-047KN or equavalent.

Providing and Fixing Hand shower (Health Faucet) with 8mm Dia,1 Meter Long Flexible Tube & Wall Hook all complete. Jaguar Model ALD-CHR-573 or equivalent.

Providing and Fixing Towel Ring round with round flange all complete. Jaguar Model ACN-CHR-1121BN or equavalent.

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit with modular switch , modular plate, suitable size G.l. box etc as required

Wiring for twin control light point with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, 2 way modular switch, modular plate, suitable GI box etc as required

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required

Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate.etc. as required

Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate/,switch box including connections but excluding modular plate etc. as required.

Supplying and fixing modular blanking plate on the existing modular plate & swltch box but excluding modular plate as required.

Supplying and fixing following size/ modules, Gl box along with modular base and cover plate for modular switches in recess etc as required

Supplying and fixing suitable size GI Box with cover in front on surface or in recess with suitable size including providing and fixing 5 pin 5/6 amps socket outlet and 5/6 amps modular type switch, connections, painting etc. as required

Supplying and fixing suitable size Gl box with modular plate and cover in front on surface or in recess including providing and fixing 6 pin 5/6 & 15/16 amps modular socket outlet and 15/16 amps modular switch, connection etc. as required.

Supplying and fixing 2 pin, 6 amp ceiling rose on the existing junction box/ wooden block including connection etc as required

Supplying and fixing batten/ angle holder including connection etc. as required

Supplying and fixing Ding-Dong call bell suitable for single phase, 230 volts complete as required

Supplying and fixing suitable size Gl box with modular plate and cover in front on surface or in recess including providing and fixing 25 amps modular socket outlet and 25 amp modular SP MCB 'C' curve, including connections, painting etc. as required

Supptying and fixing following rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive loads of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required

Supplying and fixing 4'X18 watt LED batten with minimum efficacy 100 lm/w in polycarbonate housing and complete with integrated electronic driver etc directly on wall/ ceiling including connections with 1.5 sq.mm FRLS pVC insulated copper conductor etc. as required.

Supply and installation of regular/standard model A.C. ceiling fan of 1200 mm sweep with service value (CM/MM) minimum 4.00, Air delivery minimum 270 cum/min including wiring the down rods of standard length (upto 30 cm) with 1.5 sq. mm FRLS PVC insulated copper conductor etc as required.

Supply and installation of following sweep/ sizes metallic blade, heavy duty, single phase, 230 V A.C. Exhaust Fan in existing opening including making good the damage, connection, testing and commissioning etc as required

IN FIG.

IN FIG.

(A)Instructions to Bidders for Filling Financial Bid

The bidder shall quote the rates in the Price / Financial Bid in typed form only. The quoted rate / percentage shall be clearly mentioned both in figures and in words in the space provided in the BOQ.

Any bid in which the rates are written by hand shall be summarily rejected and will not be considered for evaluation.

The contractor shall quote percentage above / below / at par with the estimated rate for schedule items and item-wise rates for Non-Schedule Items (NSI) as provided in the BOQ.

The quoted rates shall be inclusive of all taxes, duties, labour charges, transportation, loading, unloading, wastage, contractor’s profit and all incidental charges, unless otherwise specified.

Overwriting, cutting or correction in the quoted rates will not be accepted. If any correction is found in the financial bid, the bid may be rejected.

In case of any discrepancy between the rate quoted in figures and in words, the rate quoted in words shall prevail.

The bidder shall carefully examine the site conditions, specifications and BOQ items before quoting the rates, and no claim for additional payment shall be entertained later.

The rates quoted by the contractor shall remain valid till completion of the work and no escalation shall be payable unless specifically provided in the contract.