Up-Gradation of Khinda PHC under AMA Hospital for the year 25-26

Earthwork in excavation of foundation in hard soil with all leads and lifts including dressing the sides and levelling the bed of the foundation including cost of all labour required for the work etc. complete with all other machineries required for the work and stacking the excavated materials away from the working area as directed by the Engineer-in-Charge

Supplying and filling foundation and plinth with sand well watered & rammed with cost, conveyance, royalty and taxes of all materials labour required for the work as per specification and direction of the Engineer-in-Charge including royalty of materials as per specification and direction of the Engineer-in-Charge including royalty of materials

Providing Cement Concrete (1:3:6) in foundation and plinth using 4cm size clean hard black granite metal of approved quality from approved quarry including hoisting, lowering and laying in layers not exceeding 15cm thick to the required level, ramming watering and curing etc.complete including cost, conveyance, royalty taxes of all the materials required for the work with all labour, T&P and cess etc. complete in all respect as per specification and direction of the Engineer-in-charge.

R.C.C work of M-25 grade with 20mm and down grade black hard granite (crusherbroken) stone chips including cost, conveyance, royalty & taxes of all materials & cost of all labour & T&P required for the work etc. complete as per specification & direction of Engineer in charge. (Column Base and footing)

Plinth beam

Column and Beam

Cutting, streightening the bent up M.S./TS Rods bending, binding, welding, jointing if necessary and tying the grills and placing in position, as required for R.C.C work and for providing required No. of Fan Hooks hoisting, lowering, laying including, cost, conveyance, taxes of all M.S. Rods or Tor steel and binding wires of 118 to 20 gauge required for the work bending, binding and tying the grills in all floors (Payment will be made on weight of M.S. Rods or Tor steel only and no separate payment will be made towards the weight of binding wires) as per direction of the Engineer-in-Charge

Fly Ash brick masonary in C:M (1:6) in foundation and plinth using 23cmx11cmx8 cm size bricks having crushsing strength of not less than 75 Kg. per sq.cm. including splays cutting, circular, mouldings, and corbelling , champhering and similar such type of work , watering and curing etc . complete including cost , conveyance, royalities and . of all materials and cost of all labour with T&P required for the work etc. complete including 1% cess and as per the specification as directed by the Engineer-in-charge.

Fly Ash brick masonary in C:M (1:6) in Superstructure using 23cmx11cmx8 cm size bricks having crushsing strength of not less than 75 Kg. per sq.cm. including splays cutting, circular, mouldings, and corbelling , champhering and similar such type of work , watering and curing etc . complete including cost , conveyance, royalities and . of all materials and cost of all labour with T&P required for the work etc. complete including 1% cess and as per the specification as directed by the Engineer-in-charge.

12 mm thick cement plaster(1:6) over brick massonary finished smooth, after racking out the joints including watering, and curing with cost, conveyance, royalities and taxes of all materials, and cost of all labour and T & P required for the work complete as directed by the Engineer-in-Charge

16mm thick cement plaster in C.M.(1:6) over brick masonary finished smooth after racking out the joints including watering, curing with cost conveyance, royalities and taxes of all materials and cost of all labour andT&P required for the work etc complete etc. complete as per specification and direction of the Engineer-in -charge.

Finishing surface of walls with cement based wall putty (Water based) of approved make and finished smooth and even surface to receive painting including cost of scaffolding, staging charges with cost of all materials taxes, labour T&P and cess etc. complete in all respect as per specification and direction of the Engineer-in-charge.

Wall painting two coats with weather coat paint of approved shade on new work to give an even shade including cost of paint etc com,plete aspe rdirection of Engineer in charge.

Supplying of M.S. Doorshutter , Window grills, Grills, collapsible gates made out of M.S. Angle frame, M.S. Flat, Sheet etc of approved section & design, electrical

ly welded properly with all necessary locking arrengement, and 1 coat red oxide primer including cost of all materials, labour T&P, carriage of materials to site etc. complete.

Supplying of 100mm dia 4.50mm thick G I pipe etc of approved section & design, electrically welded properly with all necessary locking arrengement, and 1 coat red oxide primer including cost of all materials, labour T&P, carriage of materials to site etc. complete.

Painting Enamel paint 2 coats with any approved paint in iron works including sand papering, polishing surfaces, cost of paints, cost of all labour, T&P, etc complete in all floors as per direction of E.I.C.

Supplying, fitting afixing of stainless steel of 304 grade in hand railing using 50mm dia of 2mm thick circular pipe with Balustrade of size 32mm x 32mm @ 0.90mtr. C/C and stainless square pipe bracing of size 32mm x 32mm x 2mm in 3 rows in stair case as per approved design and specification, buffing, polishing etc. with cost conveyance, taxes of all materials labour, T&P etc. required for the complete as per the direction of Engineer-in-Charge.

Supplying and filling foundation and plinth with sand well watered & rammed with cost, conveyance, royalty and taxes of all materials labour required for the work as per specification and direction of the Engineer-in-Charge including royalty of materials as per specification and direction of the Engineer-in-Charge including royalty of materials

Providing Cement Concrete (1:3:6) in foundation and plinth using 4cm size clean hard black granite metal of approved quality from approved quarry including hoisting, lowering and laying in layers not exceeding 15cm thick to the required level, ramming watering and curing etc.complete including cost, conveyance, royalty taxes of all the materials required for the work with all labour, T&P and cess etc. complete in all respect as per specification and direction of the Engineer-in-charge.

Parking Shed:- Earthwork in excavation of foundation in hard soil with all leads and lifts including dressing the sides and levelling the bed of the foundation including cost of all labour required for the work etc. complete with all other machineries required for the work and stacking the excavated materials away from the working area as directed by the Engineer-in-Charge

R.C.C work of M-20 grade with 20mm and down grade black hard granite (crusherbroken) stone chips including cost, conveyance, royalty & taxes of all materials & cost of all labour & T&P required for the work etc. complete as per specification & direction of Engineer in charge. (Column Base)

Cutting, streightening the bent up M.S./TS Rods bending, binding, welding, jointing if necessary and tying the grills and placing in position, as required for R.C.C work and for providing required No. of Fan Hooks hoisting, lowering, laying including, cost, conveyance, taxes of all M.S. Rods or Tor steel and binding wires of 118 to 20 gauge required for the work bending, binding and tying the grills in all floors (Payment will be made on weight of M.S. Rods or Tor steel only and no separate payment will be made towards the weight of binding wires) as per direction of the Engineer-in-Charge

Fly Ash brick masonary in C:M (1:6) in foundation and plinth using 23cmx11cmx8 cm size bricks having crushsing strength of not less than 75 Kg. per sq.cm. including splays cutting, circular, mouldings, and corbelling , champhering and similar such type of work , watering and curing etc . complete including cost , conveyance, royalities and . of all materials and cost of all labour with T&P required for the work etc. complete including 1% cess and as per the specification as directed by the Engineer-in-charge.

Fly Ash brick masonary in C:M (1:6) in Superstructure using 23cmx11cmx8 cm size bricks having crushsing strength of not less than 75 Kg. per sq.cm. including splays cutting, circular, mouldings, and corbelling , champhering and similar such type of work , watering and curing etc . complete including cost , conveyance, royalities and . of all materials and cost of all labour with T&P required for the work etc. complete including 1% cess and as per the specification as directed by the Engineer-in-charge.

Plinth bend

Wall painting two coats with weather coat paint of approved shade on new work to give an even shade including cost of paint etc com,plete aspe rdirection of Engineer in charge.

12mm thick C.P. (1:6) over brick walls finished smooth including watering & curing with cost, conveyance, royality & all taxes of materials & labour with T&P required for the work etc. complete as per direction of Engineer-in-Charge.

Supplying and fixing of 60mm thick cement concrete interlocking paver block of M-30 grade of approved make, design, colour and size made by Block making machine with proper compaction laid in required pattern etc. complete in all respect conforming to IRC SP-63:2018.

Providing and fixing of coloured GCI sheet including labour charges,cost of materials& cost conveyance etc. complete as per diraction of EIC.

Providing, fitting, fixing truses using A.I,M.S. flats, Joists etc. complete including all cost,conveyance,taxes etc. complete

Supplying and filling foundation and plinth with sand well watered & rammed with cost, conveyance, royalty and taxes of all materials labour required for the work as per specification and direction of the Engineer-in-Charge including royalty of materials as per specification and direction of the Engineer-in-Charge including royalty of materials

Providing Cement Concrete (1:3:6) in foundation and plinth using 4cm size clean hard black granite metal of approved quality from approved quarry including hoisting, lowering and laying in layers not exceeding 15cm thick to the required level, ramming watering and curing etc.complete including cost, conveyance, royalty taxes of all the materials required for the work with all labour, T&P and cess etc. complete in all respect as per specification and direction of the Engineer-in-charge.

Parking Shed:- Earthwork in excavation of foundation in hard soil with all leads and lifts including dressing the sides and levelling the bed of the foundation including cost of all labour required for the work etc. complete with all other machineries required for the work and stacking the excavated materials away from the working area as directed by the Engineer-in-Charge

R.C.C work of M-20 grade with 20mm and down grade black hard granite (crusherbroken) stone chips including cost, conveyance, royalty & taxes of all materials & cost of all labour & T&P required for the work etc. complete as per specification & direction of Engineer in charge. (Column Base)

Cutting, streightening the bent up M.S./TS Rods bending, binding, welding, jointing if necessary and tying the grills and placing in position, as required for R.C.C work and for providing required No. of Fan Hooks hoisting, lowering, laying including, cost, conveyance, taxes of all M.S. Rods or Tor steel and binding wires of 118 to 20 gauge required for the work bending, binding and tying the grills in all floors (Payment will be made on weight of M.S. Rods or Tor steel only and no separate payment will be made towards the weight of binding wires) as per direction of the Engineer-in-Charge

Fly Ash brick masonary in C:M (1:6) in foundation and plinth using 23cmx11cmx8 cm size bricks having crushsing strength of not less than 75 Kg. per sq.cm. including splays cutting, circular, mouldings, and corbelling , champhering and similar such type of work , watering and curing etc . complete including cost , conveyance, royalities and . of all materials and cost of all labour with T&P required for the work etc. complete including 1% cess and as per the specification as directed by the Engineer-in-charge.

Fly Ash brick masonary in C:M (1:6) in Superstructure using 23cmx11cmx8 cm size bricks having crushsing strength of not less than 75 Kg. per sq.cm. including splays cutting, circular, mouldings, and corbelling , champhering and similar such type of work , watering and curing etc . complete including cost , conveyance, royalities and . of all materials and cost of all labour with T&P required for the work etc. complete including 1% cess and as per the specification as directed by the Engineer-in-charge.

Plinth bend

Wall painting two coats with weather coat paint of approved shade on new work to give an even shade including cost of paint etc com,plete aspe rdirection of Engineer in charge.

12mm thick C.P. (1:6) over brick walls finished smooth including watering & curing with cost, conveyance, royality & all taxes of materials & labour with T&P required for the work etc. complete as per direction of Engineer-in-Charge.

Supplying and fixing of 60mm thick cement concrete interlocking paver block of M-30 grade of approved make, design, colour and size made by Block making machine with proper compaction laid in required pattern etc. complete in all respect conforming to IRC SP-63:2018.

Providing and fixing of coloured GCI sheet including labour charges,cost of materials& cost conveyance etc. complete as per diraction of EIC.

Earthwork in excavation of foundation in hard soil with all leads and lifts including dressing the sides and levelling the bed of the foundation including cost of all labour required for the work etc. complete with all other machineries required for the work and stacking the excavated materials away from the working area as directed by the Engineer-in-Charge

Cup board and pigeon hole:-Providing and fixing ISI marked shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak three ply veneering with vertical grains or cross bands and face veneers on both faces of shutters of approved design including cost of all door fittings and fixtures etc. complete

Supplying and filling foundation and plinth with sand well watered & rammed with cost, conveyance, royalty and taxes of all materials labour required for the work as per specification and direction of the Engineer-in-Charge including royalty of materials as per specification and direction of the Engineer-in-Charge including royalty of materials

Providing Cement Concrete (1:3:6) in foundation and plinth using 4cm size clean hard black granite metal of approved quality from approved quarry including hoisting, lowering and laying in layers not exceeding 15cm thick to the required level, ramming watering and curing etc.complete including cost, conveyance, royalty taxes of all the materials required for the work with all labour, T&P and cess etc. complete in all respect as per specification and direction of the Engineer-in-charge.

Fly Ash brick masonary in C:M (1:6) in foundation and plinth using 23cmx11cmx8 cm size bricks having crushsing strength of not less than 75 Kg. per sq.cm. including splays cutting, circular, mouldings, and corbelling , champhering and similar such type of work , watering and curing etc . complete including cost , conveyance, royalities and . of all materials and cost of all labour with T&P required for the work etc. complete including 1% cess and as per the specification as directed by the Engineer-in-charge.

Fly Ash brick masonary in C:M (1:6) in Superstructure using 23cmx11cmx8 cm size bricks having crushsing strength of not less than 75 Kg. per sq.cm. including splays cutting, circular, mouldings, and corbelling , champhering and similar such type of work , watering and curing etc . complete including cost , conveyance, royalities and . of all materials and cost of all labour with T&P required for the work etc. complete including 1% cess and as per the specification as directed by the Engineer-in-charge.

Plinth bend

Wall painting two coats with weather coat paint of approved shade on new work to give an even shade including cost of paint etc com,plete aspe rdirection of Engineer in charge.

Providing, supplying and fitting and fixing of M.S. Door / Window shutters, gates & M.S. grills as per approved design etc. complete.

BMW storage and Liquid Wastage Management:- Earthwork in excavation of foundation in hard soil with all leads and lifts including dressing the sides and levelling the bed of the foundation including cost of all labour required for the work etc. complete with all other machineries required for the work and stacking the excavated materials away from the working area as directed by the Engineer-in-Charge

Painting two coats over a coat of primer with any approved Enamel paints including cost, conveyace of all materials and labour (T&P) etc. complete as per the direction of Engineer-in-Charge.

S/F of 15A Socket on 2 module for AC

Wiring for circuit/sub main alongwith earth wire with following sizes of PVC insulated single core multistrand copper conductor with ISI marked conforming to IS-694/1990 in 20 mm dia non metallic heacy duty flexible conduit 1.6 mm in recessed PVC conduit as required (make of wire-Polycab/Finolex/L&T/Anchor/Havels/V-Guard/KEI/Great White).2x4 sqmm + 1 x 1.5 sqmm (1.8.3)

S/F of 4way Double door (2.3.5)

S/F of 5 to 32 Amp rating 240 Volt "B" series MCB for lighting and other loads in the existing MCB Distribution Board ISI marked complete with connection, testing and commissioning etc. as required (2.6.1)

Provn. of 3 1/2 x 35 sqmm Armoured Cable with all connections(25)

Laying of MV cable above 25sqmm to 120 sqmm in ground (5.1.2)

S/F of 1.5T 5Star Inverter model split type AC Machine, Make-Carrier /Blue Star /Hitachi including out-door Stand with all accessories and connections

S/F of 4KVA Voltage Stabilizer (110-300V) Upto 1.5 Ton AC, Make-Microtech/V-Guard

Internal Wiring and fitting S/F of A.C.Starter 20Amp with 2 module Box.(Make Havells/Equivalent)

Glow Sign Board (1)Supply and fixing of LED based Glow Sign Board made of MS Angle frame of 40mm x 40mm x 5mm and 2'' x 1'' size hollow Aluminium square bar base with 3mm ACP sheet . (2)ACP paneling of the main gate as per below . Specification (i) Size of the LED based Display board-18’ x 2' (ii) Matter of display-('ଆୟୁଷ୍ମାନ ଆରୋଗ୍ୟ ମନ୍ଦିର ,ପ୍ରାଥମିକ ସ୍ବାସ୍ଥ୍ୟକେନ୍ଦ୍ର,ଖିଣ୍ଡା ,ସମ୍ବଲପୁର' ) in Odia language including Government of Odisha & NHM Logo. (iii) Size of the Oriya big letter : 14'' (Iv)Size of the Oriya small letter: 6” (v) Colour of the letter: White and black (vi) Sheet for fixing the letter : ACP sheet, Green in colour. (vii) Letter sheet: 3mm Acrylic sheet. (viii) LED Bulb : 1.8 Watt white colour (ix) Power supply: SMPS (Switch made power supply),RPS (Regulatory Power Supply) input voltage 160V to 230V AC and output 12/24 Volt Dc., 400Watt- 2 Nos. (x) Paste for ACP Sheet: Silicon Paste. (xi) Protection from water: Backlight Flex. (xii) Wiring inside the panel with 1.0 & 1.5 mm2 multistrand copper conductor. (xiii) Logo: Square shaped logo (18”x18”) of Govt. of Odisha and NHM. (xiv)ACP Paneling of the main gate with green and red colour high quality ACP Sheet.

S/F of 32A rating "C" Series DP MCB (Make: L&T/Equivalent)

Wiring for circuit/sub main alongwith earth wire with following sizes of PVC insulated single core multistrand copper conductor with ISI marked conforming to IS-694/1990 in 20 mm dia non metallic heacy duty flexible conduit 1.6 mm wiring in existing conduit PVC conduit as required (make of wire-Finolex/L&T/Anchor/Havels/V-Guard).2x6 sqmm + 1 x 2.5 sqmm( 1.8.4)

S/F of 'B/C/D' series SP MCB of 5 - 32A amp rating (As per direction of engineer in charge) 240Volt for lighting and other loads in the existing MCB Distribution board ISI marked complete with connection, testing and commissioning etc. as required single pole (SP) (2.6.1)

S/F of 32A DP Switch with indicator(Make-Havells/Equivalent)

Earthing with G.I. Earth pipe 3 mtr Long 40mm dia ISI marked including accessories & providing masonary enclosure with cover plate having locking arrangement & watering pipe with charcoal & salt as required (3.2 +3.3)

Supply & laying 6 SWG G.I. wire in recess for loop earthing as required (3.17)

Supply of cable for Street Light 3c X 1.5 sqmm FR PVC Round Sheathed Copper Conductor (MakePolycab or Equivalent )

Provision of Armoured cable size 2x6sqmm (15)

Laying of MV Cable upto 25sqmm in ground (5.1.1)

Laying of MV cable upto 25sqmm on surface (5.5.1)

S/F of 40 mm HDPE pipe for laying & protection of cable(Make:Sudhakar or Equivalent)

Supply & Instalation of 8 meter octagonal Pole shall be designed to withstand the maximum wind speed as per IS 875.(Top 70 mm & Bottom 135 mm of 3 mm thickness with Base Plate (225X225X16mm) (MAKE-Bajaj/Utkarsh/RR Ispat/BPP )with Galvanised Four arm detachable 1.5 mtr bracket suitable for 70mm top. with 4 nos of Foundation bolts and nuts (20 mm dia 600-700mm Length) and anchor plate to be mounted on concrete Foundation (2'X2'X4' high) for errection of Pole firmly as per direction of Engineer in Charge.

S/F of 60wt. LED St. Light fitting with LED Electronic driver with all accessories & connection( Make- Crompton/Phillips/HPL/Polycab/Havells )

Area Lighting : S/F of following 2way single pole and neutral sheet steel MCB 250 V on recessed complete with tinned coper bus bar , neutral bar, earth bar,din bar, detachable gland plate, inter connections, phospatized and powder painted including earthing etc. as required(but without MCB)2 way single door(2.3.1 b)

Dismantling and removing old tiled cladding from walls including racking out joints 12mm deep,stacking the useful materials for reuse and removing the debris within 50m lead etc all complete as per specification and direction of the E.I.C.

PH Works:- Dismantling & removing old tiled flooring including removing the old base&stacking the useful materials for reuse and removing the debris within 50m lead etc all complete as per specification and direction of the E.I.C.

Supplying all materials,labour,T&P and fixing ceramic tiles/marble tiles/ chequered tile in floors,treads and landing on 25mm thick bed of cement slurry mixed with pigments to match the shades of the tiles including rubbing and polishing complete as per the specification and direction of E.I.C.

Dismantling and removing old OWC including removing the old base and removing the debris within 50m lead etc all complete as per specification and direction of the E.I.C.

Supplying all materials,labour,T&P and fixing porcelain glazed tiles in dados/skirtings on 12mm thick CP(1:3) joined with neat cement slurry mixed with pigments to match the shades of the tiles including rubbing and polishing etc. all complete as per direction of the E.I.C.

110mm U-PVC P-trap

110mm U-PVC SWR Single junction door

110mm U-PVC SWR door bend

110mm U-PVC SWR Offset

110mm U-PVC SWR plain bend

110mm U-PVC SWR vent cowl

125 mm dia C.P Grating

Supplying all materials,labour,T&P and fitting and fixing U-PVC SWR soil waste ventilating pipes and fittings of the following outside diameter conforming to ISI No 4985/2000 to walls with nails,bobbins and wooden plugs including jointing with supply of approved rubber lubricant by non-heat application method as per manufacturer's specification testing etc all complete as per P.H specification and direction of the E.I.C. 110mm diameter U-PVC SWR pipes

(b)Wall mounted Grab bar 600mm long

Supplying all materials,labour,T&P and fixing wash down water closet(EWC) with integral 'S' or 'P' trap to the floor with wooden p

lug and CP screw including jointing the trap with soil waste pipe in cm(1:1)etc all complete as per specification and direction of the E.I.C. (a)EWC with ‘P’&‘S’ trap plain with PVC Seat cover(Nycer/ Cera/ Hindware/Parryware)

Supplying all materials,labour,T&P and fixing mirror of superior glass mounted on 6mm thick A.C.sheet or plywood sheet and fixed to wooden plugs with CP screws and washers complete as per specification and direction of the E.I.C.

Supplying all materials,labour,T&P and fixing wash laboratory sink with CI/MS brackets painted white including holes in walls and making good the damages etc all complete as per specification and direction of the E.I.C. (a)600mmx450mmx250mm Porcelean sink with 40mm dia CP west,west pipe and brackets.

Supplying all materials,labour,T&P and fixing CP soap holder complete with CP brass brackets fixed to wooden plugs with CP screws as per specification and direction of the E.I.C.

Supplying all materials,labour,T&P and fixing standard size Acrylic Shelf complete with CP brass brackets and guard rails fixed to wooden plugs with CP screws as per specification and direction of the E.I.C.

Earthwork in all kinds of soil in excavation of foundation trenches within 50m initial lead and 1.5m initial lift including rough dressing and breaking clods to maximum 5cm to 7cm and laying in layers not exceeding 0.30m in depth etc all complete as per direction of the E.I.C. Initial lift upto 1.5 mtr

From 1.5 mtr to 3.0 mtr depth

Supplying all materials,labour,T&P and filling in foundation and plinth with river sand well watered and rammed including conveyance of all materials to work site,payment of royalty,taxes etc all complete as per the direction of the E.I.C.

Supplying all materials,labour,T&P and providing cc(1:3:6)with 40mm HG metal including watering,curing and conveyance of all materials to site payment of royalty,taxes etc all complete as per P.H specification and direction of the E.I.C.

Supplying all materials,labour,T&P and providing cc(1:1.5:3)with 12mm size HG chip including watering,curing and conveyance of all materials to work site, payment of royalty,taxes etc all complete as per P.H specification and direction of the E.I.C.

Supplying all materials,labour T&P and fixing wash basins with CI/MS brackets painted white including cutting holes in walls and making good the damages with supply of wooden plugs,screws and cement etc, fixing PVC waste pipe of 32mm nominal diameter for wash basin including brass check nut complete,fixing 32mm dia CP brass waste, etc all complete as per specification and direction of the E.I.C. 550mmx400mm WHB with 32mm dia CP west,west pipe,brackets and connection pipe .(make- parryware)

Supplying all materials,labour,T&P and fixing standard sized CP towel rail complete with CP brass brackets fixed to wooden plugs with CP screws as per specification and direction of the E.I.C. 20mmx450mm long CP towel rail

Supplying all materials,labour,T&P and providing cement plaster with punning on brick/stone work including watering,curring and conveyance of all materials to work site,payment of royalty,taxes etc all complete as per P.H specification and direction of the E.I.C.

Supplying all materials,labour,T&P and providing rigid and smooth centering and shuttering for RCC work including false work and dismantling them after casting including conveyance of all materials to work site,payment of royalty, taxes etc all complete as per P.H specification and direction of the E.I.C.

Supplying all materials,labour,T&P and providing brickwork with KB brick having crushing strength not less than 75kg/cm2 with dimensional tolerence of +/- 8% in cm including watering,curring,conveyance of all materials to work site,payment of royalty,taxes etc all complete as per P.H specification and direction of the E.I.C. In Foundation and Plinth in cm(1:4)

Supplying all materials,labour,T&P and providing cement plaster on brick/stone work including watering, curring and conveyance of all materials to work site,payment of royalty,taxes etc all complete as per PH specification and direction of the E.I.C. 12mm thick CP in cm(1:3)

Supplying all materials,labour,T&P and providing MS reinforcements for RCC work including cutting, bending,binding,straightening and tying the grills and placing in position including cost of binding wire 18 to 20 gauge conveyance of all materials to work site,payment of royalty,taxes etc all complete as per P.H specification and direction of the E.I.C.

Supplying all materials,labour,T&P and providing RCC(1:1.5:3)with 12mm size HG chips including watering, curing and conveyance of all materials to work site,payment of royalty,taxes etc all complete as per P.H specification and direction of the E.I.C.

Supplying all materials,labour,T&P and providing 110mm dia PVC Tee inside the septic tank including cutting holes and duly embeded in PCC(1:1.5:3)using 12mm size HG chips fitted and fixed in position and mending good the damages etc all complete as per P.H specification and direction of the E.I.C.

Supplying all materials,labour,T&P and providing 12mm thick cement flush pointing in cm(1:3)to brick masonry works including watering curring and conveyance of all materials to work site,payment of royalty,taxes etc all complete as per P.H specification and direction of the EIC.

Supplying all materials,labour,T&P and making MS step Iron in 8mm Dia MS steel bars and fixing into walls of Manhole/Septic Tanks duly embeded in cc(1: 2:4)etc all complete as per P.H specification and direction of the E.I.C.

Supplying all materials,labour,T&P and providing 50mm thick pre-cast RCC baffle wall in RCC(1:1.5:3)including reinforcement cage using 12mm size HG chips fitted and fixed in position,finished smooth etc.complete including cutting grooves and mending good the damages etc all complete as per P.H specification and direction of the E.I.C.

Supplying all materials,labour,T&P and filling Foundation and Plinth with excavated earth including watering, ramming etc all complete as per direction of the E.I.C.

Supplying all materials,labour,T&P and constructing Inspection chamber of the following sizes with cc(1: 3:6)using 40mm size HG metal on bed,1st class KB brickwork in cm(1:6)moulding&shaping the channel inside and benching with cc(1:1.5:3)using 12mm size HG chips,12mm thick CP(1:3)with punning to inside,cement flush pointing(1:3) to outside,RCC coverslab in cc(1:1.5:3)using 12mm size HG chips with RCC manhole cover,earthwork excavation in all kinds of soil and refilling the cavity around the chamber including watering, curing,conveyance of all materials to worksite,payment of royalty,taxes etc. all complete as per approved specification and direction of E.I.C. Inside size 760mm x 760mm x 460mm

Supplying all materials,labour,T&P and laying in trenches 4kg/cm2 U-PVC SWR soil waste ventilating pipes for sewer line of following dia in trenches(to slope or level)and jointing with supply of approved solvent cement by non-heat application method cc(1:3:6)using 40mm size hard granite metal on bed of the trenches and all round concrete encashing with cc(1:4:8)using 40 mm size HG metal,earthwork in excavation in trenches in all kinds of soil,refilling the same in a layer of 0.30mtr with watering,ramming and removing of surplus earth testing the SW pipeline etc. all complete as per approved drawing, specification and direction of the E.I.C. 110mm dia PVC Pipe Swerage line with allround encasing(I.S.4985/2000-4Kg/cm2)

Supplying all materials,labour,T&P and constructing soakway pit of the following size with dry brick walling from bottom upto invert of inlet pipe and 1st class KB brickwork in cm(1:6)for the remaining height at top, 12mm thick CP(1:4) inside and outside over masonry brick work,gravel packing in the rear of well steining, RCC cover slab in cc(1:1.5:3)using 12mm HG chips,fitted with iron lifting handles including earthwork in openwell excavation in all kinds of soil and refilling of cavity around the pit & painting the iron works,watering, curing,conveyance of all materials to work site,payment of royalty,taxes etc all complete as per approved specification and direction of the E.I.C. 1.20m diax 2.00m deep soakway pit

Supplying all materials,labour,T&P and construction of masonry staging with providing 1st class KB brick work in cm(1:6)of 0.46m height in staging,12mm CP in cm(1:6),RCC Beam of 0.25mx0.30mx2.60m in cc(1:1.5:3) using 12mm size HG chips including centering,shuttering,bending and binding of rod etc watering,curring,conveyance of all materials to worksite,payment of royalty, taxes etc all complete as per P.H specification and direction of the E.I.C 2000 lits capacity on the roof of Ground floor.

Supplying all materials,labour,T&P and fitting and fixing brass/CP fittings of the following nominal bore with supply of all jointing materials etc. all complete as per specification and the direction of the E.I.C. 15mm dia CP Bib Cock(Short body)(Jquar Fittings)

15mm dia CP Bib Cock(Long body)(Jquar Fittings)

15mm dia CP 2-in-1 Bib Cock(Jquar Fittings)

15mm dia CP Health Fuccet

15mm dia CP Angle Stop Cock(Jquar Fittings)

15mm dia CP Pillar Cock (Elbow)

Supplying all materials,labour,T&P and Fitting and Fixing of Rotational moulded polythene cylindrical vertical water storage tank conforming to 15701/1996 including cutting holes through the tank and fixing mild steel tubes and fittings and providing extra sockets and jamnuts including hoisting upto a height of 5mtr above GL and placing the tank in required position including conveyance of all materials to work site,payment of royalty, taxes etc all complete as per P.H specification and direction of the E.I.C. 2000 lits capacity on the roof of Ground floor

Supplying all materials,labour,T&P and providing & fixing to wall or ceiling or floor PVC pipes conforming to ASTM-D-1785/89(csh-80)and pipe fittings of the following nominal bore with clamps including making good the wall,ceiling,and floor, testing all complete as per specification and the direction of the E.I.C. 25mm dia C-PVC pipes(Sh-80)(External)

25mm dia PVC fullway valve

15mm dia C.P Revolving Shower with arm

15mm dia C.P Concealed stop cock

Supplying all materials,labour T&P and fitting and fixing 10 Ltrs capacity PVC low level flushing cistern with a pair of CI/MS brackets complete with fittings such as syphonic arrangement,15mm nominal size brass/PVC ballvalve with polythene float,CP/brass handle,unions and couplings for connection with inlet, outlet,overflow pipes,32mm dia PVC flush bend,15mm dia PVC connection pipes including cutting holes and making good the same and connecting the flush bend with cistern and closet and connecting inlet pipe with supply main with etc all complete as per specification and direction of the E.I.C. 10 lit PVC L/L Cistern

200mmx150mm Size Bore Well Through DTH Method:- Labour for drilling of perfactly vertical bore holes as specified dia.For a specified depth below GL through consolidated and uncosolidated rock with down the hole hammer drilling rigs or combination drilling rigs(600cfm/200psi) as required to suit the site conditions as per the direction of E.I.C.including use of own rigs with its accessories,tools & plants and consumable etc. for lowering 200mm dia PVC/GI pipes for house fitted with socket and with or without well screen as per the necessity for the soft,medium,hard & boulder formation(PCV/GI)casing pipes if required to prevent collapse of over burden is to be provided by the contractor including lowering and with drawing after complete of tube well.(Tube well-1No) (a)Drilling of 200mm. dia. Bore-

(b)Drilling 200mm dia. Bore-

15mm dia CP Flange

(b)Cost of 200mm dia PVC casing pipes-

Cleaning & developing the tube well using their own compressor continuously worked till clear and adequate discharge is obtained from the tube well including supply and use of all necessary equipment and labour as per the direction of E.I.C.

Supplying all materials labour T&P and providing Fitting & fixing of Aquaguard of REVIVA RO+UV+ MTDS with cool and hot Provision etc all complete as per approved quality and specification and direction of E.I.C.

Supplying all materials,labour,T&P and fitting&fixing of 1.0HP single phase vertical submersible pump set with commissioning and testing etc. all completes as per P.H. Specification and direction of E.I.C.

Lowering the following GI/PVC pipe with or without soltted pipes as per necessity from GL upto 30.00m depth and fitted and fixed in perfecty vertical position including cutting and threading pipes and soltted pipes and supplying and fixing of all jointing materials,T&P etc the top of the casing pipe threaded including piping tube well to prevent entry of foreign materials from above(PVC/G.I)supplied by the contractor (including cost of pipe) (a)Lowring of 200mm dia pipes-

Supplying all materials,labour,T&P and fitting & fixing of (2.5mm)2 3core copper flat suitable cable having ISI mark of reputed company like BCH/Finolex or equivalent & connecting the pump starter including cost conveyance & taxes etc. all completes as per P.H. Specification and direction of E.I.C.

Supplying fitting and fixing of plastic rope MS well cover,MS clamp,stainless steel short piece,bend & socket including all cost,taxes etc all complete as per direction of the E.I.C.

Supplying fitting and fixing of HDPE Pipes & pipe fittings with making connection to pump set including all cost conveyance and taxes etc all complete as per direction of the E.I.C.

1.00HP Single Phase Submersible Pump Set Supplying all materials,labour,T&P and fitting and fixing of ISI mark 1.0HP single phase vertical water cool submersible pump set with discharge 1800/2200Lit/Hour & a head-55/70mtr.of reputed make(CRI/KSB/ Texmoor Equivelent)Including cost conveyance and taxes etc. all completes as per PH Specification and direction of E.I.C.