Renovation and Beautification work of guru gobind community center as district library at Amthala Aburoad

Amount

Supply and Fixing of Library Wooden Chair with handle, size: 18" x 18" x 36 " as per drawing and design, made of Teak wood grade-1st, the back pegs and handle made out of 4" * 1.5" wood other 2 pegs and horizontal members supporting seat shall be made out of 3" * 1.5" wood , other interconnecting members made out of 1.5" * 1.5" wood.The back support CNC shall be made out of 9" * 1" wood as per design given by engineer incharge. Chair made with foam must be made of 40 density of sleep well / Arvind / corfoam / sweet dream for the seat and unhoulstry must be made of 40 density of sleep well / Arvind / corfoam / sweet dream for the seat and uphoulstry must be of superior quality fabric, applicable Hardware and fixtures are good quality of godrej / kitch / ebco / enox make, all wood surface must of finished with melamine poished as per approved shade, all material as per IS relevant code to be use and complete in all respect as per direction of Engineer-in- charge

Supply and Fixing of Reading cum Computer Table (Cubical Type furniture Table) Size : Top should be 48" D x 30" H each unit 8' long fixed on wall side, the top of the table made with 25 mm prelaminated edge bending with highly compressed approved 1.00 mm thick Laminate. The understructure shall be having partitions for each seating @32"C/C made from both side Laminate ply 19 mm thick prelaminated with edge bending with sunmica, induvidual seating partition above the table shall be fixed both sides and front side with 12mm toughened glass 450mm high, each glass fixed with the table with steel brackets . the boys and girls section on two tables 12ft long shall be partitioned with both side Laminate ply 19 mm thick prelaminated with edge bending in place of glass partition , 3ft high fixed over the table. There should be provision for foot rest with slope at bottom made with 19mm ply laminated 1ft wide for each sitting. and Hollow construction beneath the footrest shall facilitate electric wire/ cable for internet etc as required at site. The modesty & side panel should be both side prelaminated edge bending with highly compressed approved 1.00 mm thick Laminate. All material shall be as per design and drawing and as per direction of Engineer-in-charge.

Supply and Fixing of Reading cum Computer Table (Cubical Type furniture Table) Size : Top should be 24" D x 30" H each unit 8' long fixed on wall side, the top of the table made with 25 mm prelaminated edge bending with highly compressed approved 1.00 mm thick Laminate. The understructure shall be having partitions for each seating @32"C/C made from both side Laminate ply 19 mm thick prelaminated with edge bending with sunmica, induvidual seating partition above the table shall be fixed both sides and front side with 12mm toughened glass 450mm high, each glass fixed with the table with steel brackets, There should be provision for foot rest with slope at bottom made with 19mm ply laminated 1ft wide for each sitting. and Hollow construction beneath the footrest shall facilitate electric wire/ cable for internet etc as required at site. The modesty & side panel should be both side prelaminated edge bending with highly compressed approved 1.00 mm thick Laminate. All material shall be as per design and drawing and as per direction of Engineer-in-charge.

8Ch. H.265+ Network Video Recorder Support 8 channel IP camera input Smart H.265+/H.265/Smart H.264+/H.264 codec decoding Up to 8MP resolution preview and playback Support 1 SATA HDDs up to 8TB Each, 2 USB Ports (USB2.0) VGA/HDMI simultaneous video output, maximum resolution of HDMI is 1080P Support Multi-brand network cameras ONVIF Version conformance Industrial-grade embedded processor Embedded LINUX Web/operating in local GUI 1 VGA/1 HDMI simultaneous video output, maximum resolution 1080P 8MP /5MP /4MP /3MP/1080P/720P/D1/CIF Smart H.265+/H.265/Smart H.264+/H.264 1–ch@8MP(30FPS) or 1–ch@5MP(30FPS) or 2–ch@4MP(30FPS) or 2–ch@3MP(30FPS) or 4–ch@1080P(30FPS) 8–ch@720P(30FPS) Motion detection, privacy masking, video loss, PIR alarm, IPC alarm Front-end device going offline, storage error, full storage, IP conflict, MAC conflict, login lock, network security anomaly 1 SATA 2.0, up to 8TB Each. The maximum HDD capacity varies with environment temperature Play, pause, stop, fast forward, fast backward, rewind, play by frame, Full screen, backup (cut/file), partially enlarge, audio on/off 1 RJ-45 port (10/100Mbps) 2 USB Ports (1 Rear USB 2.0 , 1 Front USB 2.0 ) 8 RJ–45 ports with PoE power supply (10/100 Mbps) HTTP, HTTPS, TCP/IP, IPv4, IPv6, RTSP, UDP, NTP, DHCP, DNS, P2P, ONVIF (profile T/profile S/ profile G), RTSP, CGI, SDK Total output of NVR is <10W (Without HDD) Total output power of PoE is 72W, the maximum output power of a single port is 25.5W

• 1/2.7” 8MP PS CMOS Image Sensor (0.9407 centimetres)• Max. 8MP (3840 × 2160)@15fps and supports 2688 × 1520 (2688 × 1520)@25/30fps. • Smart H.265+ and Smart H.264+ dual-stream encoding• DWDR, Day/Night (ICR), 3D-DNR, ROI, AWB, AGC, BLC, HLC 3.6mm lens (2.8mm optional) • IR Range of 30 Mtrs, IP67, PoESupport Built-in Mic • Mobile Software: iCMOB, gCMOB• CMS Software: KVMS Pro 1/2.7” 8MP Progressive scan CMOS (0.9407 centimetres) 3840 (H) x 2160 (V) 0.04 [email protected] (Color, 30 IRE) 0.004 [email protected] (B/W, 30 IRE) 0 Lux (IR on) Auto/Manual, 1/3s ~1/100000s 0°/90°/180°/270° (Support 90°/270° with 2688 x 1520 resolution and lower) 0°/90°/180°/270° (Support 90°/270° with 2688 x 1520 resolution and lower) 3.6mm (2.8mm Optional) 3.6mm– 106.7m (Detect) 42.7m (Observe) 21.(Recognize) 10.7m (Identify) 2.8mm– 74.7m (Detect) 29.9m (Observe) 14.9m (Recognize) 7.5m (Identify) 2.8mm: 1.0m ; 3.6mm: 1.9m Smart H.265+/H.265/SmarH.264+/H.264/H.264B/MJPEG (only supported by the sub stream) 3.6mm: Horizontal: 87°; Vertical: 47°; Diagonal: 104°2.8mm: Horizontal: 105°; Vertical: 56°; Diagonal: 125° Main stream: 3840 × 2160 (1 fps–15 fps) 2688 × 1520 (1 fps–25/30 fps)Sub stream: 704 × 576 (1 fps–25 fps) 704 × 480 (1 fps–30 fps)*The values above are the max. frame rates of each stream; for multiple streams, the valueswill be subjected to the total encoding capacity. 3840 × 2160 (3840 × 2160); 3072 × 2048 (3072 × 2048); 3072 ×1728 (3072 × 1728);2592 × 1944 (2592 × 1944); 2688 × 1520 (2688 × 1520); 3M (2048 × 1536); 2304 × 1296 (2304 × 1296); 1080p (1920 × 1080); 1.3M (1280 × 960); 720p

HARD Disk Surveillance (1 TB):- Brand-Seagate Item Height- 26 Millimeters Item Weight-649 g Product Dimensions -14.7 x 10.2 x 2.6 cm Item Wattage-1

Cat 6 305mtr Generally confirming to EIA/TIA 568-C.2 and IEC/ISO11801Excellent Margin with suppression of Cross Talk (NEXT) 4 Pair Separator Design23 AWG cable For Outdoor installation Solid Bare Electrolytic Grade Copper Polyethylene (HDPE) 23 AWG (0.555 ± 0.015mm) HDPE PVC Operating Temperature 20 to +60°C

LED TV (32 Inch Full HD):- Resolution: HD Ready (1366 x 768p) | Refresh Rate: 50 hertz | Viewing angle: 178 degree, Display: A+ display | Bright LED Backlit | True Color Optimizer | 16.7 million colors, Connectivity: 2 HDMI ports to connect set top box, Blu- Ray players, gaming console | 1 USB port to connect hard drives and other USB devices

Wall Mount Rack 6U. Basic frame: CRCA (MS SHEET).Construction: Welded Cable Entry/Exit provision at Top & Bottom with Rubber at Edges. Front Door: Toughened Glass with Lock & Key. Toughened Glass used as an excellent thief deterrent. 19” Vertical Mounting RAIL with Clear “U” Marking. Powder coated Color RAL– 7035. Conforms to DIN41494 or equivalent ISO Standards. Load Bearing Capacity - 30Kg.

Compatible with WCDMA, FDD-LTE, TDD-LTE Default 802.11b/g/n 4G Router LTE: B1/3/5/7/8/20/38/40/41 WCDMA: B1/5/8 Support Wi-Fi 2.4G, Wi-Fi 2x2 MIMO, 802.11 b/g/n Support Internal antenna Support Reset, WPS 1 × 10/100Mbps LAN/WAN Port 1 × 2FF SIM Card Slot (Mini SIM Card) Power; Wi-Fi; LAN/WAN; Internet; 4G/3G Signal strength (4 Bars) Automatic Mode, Cable Broadband Mode, Wireless Broadband Mode Auto-APN; Auto dial-up; SMS (Send/Receive/Delete); Phonebook; Data limited; PIN Management Local/remote management DHCP(DHCP Server and Client) Virtual Server (UPnP/DMZ/Port Forwarding/Port Filtering/Port Mapping) Firewall (Mac/IP address filter, Wi-Fi Black/Whilte list) Upgrade firmware from local or OTA IPV4 support

Supply, Installation, Testing and Commissioning of on grid Solar Photovoltaic Power Plant conforming to MNRE specifications as amended, consisting of Mono Crystalline silicon solar cells, net metering facility, necessary protections, earthling, mounted on Aluminium/GI structure of suitable strength with following components complete as required:- A) Solar PV modules. a) Solar Photovoltaic (Mono. Crystalline of Capacity 10 KW) Module of capacity 400 Wp or above, manufactured in India, conforming to IS 14286/IEC 61215, IS/IEC 61730-Part-1, part-2 IEC 61853-part-I/IS 16170*-part- 1 Solar Photovoltaic Module conversion efficiency shall not be less than 17.5%. PV modules used in solar power plants/ systems must be warranted for their output peak watt capacity, which should not be less than 90% at the end of 10 years and 80% at the end of 25 years. b) Power Conditioning Unit (PCU) of 350-800 V DC Input voltage range and 400 V AC, three phase, 4 wire, 50Hz +/- 2.5 Hz, output voltage suitable to generate AC Power with efficiency not less than 97%, total harmonic distortion less than 3% and suitable for ambient temperature from 0 to 50 Solar PV modules of minimum fill factor 75%, to be used. An IP 65 rated enclosure is suitable for most outdoor enclosures that won’t encounter extreme weather such as flooding. Kindly Club Items from 11.1 to 11.11 for complete specification.

Bidder Name

Amount

m/s Neha Traders(GSTN-08ADIPN0660JIZF)

Vijay Construction(GSTN-NA)

m/s Neha Traders

m/s Neha Traders