8826/TOKEN-22/2026-27

Demolition of concrete and pavings n.exc 15 cm thickness (below or above ground level)

M&L, PCC 1:3:6 type C-2 using 40mm graded stone aggregate as in foundation, fitting and mass concrete

M&L 25mm thick cement concrete type B-O, 1:2:4 (12.5mm graded agg ) as in floors finished even and fair complete all as specified and directed.

Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks,lawns, drive ways or light traffic parking etc.,of required strength, thickness & size/shape, made by table vibratory method using PU coated mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand;

M&L chequered PU coated tiles 30cmx 30cmx 25mm thick,set, jointed & pointed in neat cement slurry in floors with grey cement and pigments over & including 15mm thick screed in cement mortar 1:6

M&L for providing cement concrete type B-1 1:2:4 (20mm graded aggregate) as in copings Complete all as specified and directed by Engineer-in-Charge.

Dismantling wrought iron or mild steel work of any description such as guard bars, grills etc.

S&Fsteel work as in posts and struts , truss, flats in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed.

S&F in repairs galvanised 2 strand steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacing and straining and fixing in any type of standard rails, straining bolts incl securing or tying any crossings with provn of MS wire staples or steel pins etc complete fixed in repairs.

S&F in repair razor blade barbed cancertina coil havingminium weight of 15.2 Kgs (+) or (-) 5% per coil strenched to a length of 4 to 6 mts to archive 600mm dia as in fencing to steel posts and to another coil/MS nibs including fixing with galvanised fasteners such as clips, c clip, U clips all as specified and directed by engineer-in-charge. (Note. Linear length of coil after streching and fixing shall be measured for purpose of payment.)