SPECIAL REPAIRS TO SHED NO 59 AND IAS 1 OF F E AND M AT CME PUNE UNDER GE CME KHADKI

Amount

Demolition of cement concrete (unreinforced) in ground floors and pavings not exceedidng 15cm thickness (below or aboved ground level) all as specified and directed.

M&L 75 mm thick PCC type D 2, 1:4:8 (using 40 mm graded crushed stone aggregate) in sub base of flooring/ hard standing all as specified and as directed..

M&L machine cut kota stone slab 20-25mm thick laid over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing over and including 20mm thick screed bed in CM 1:6 all as specified and as directed.

All as per item No 3 above but in riser of steps, skirting, dado and pillar jointed with grey cement complete laid over and including 10mm thick cement screed in CM 1:4 all as specified and directed.

M&L 75 mm thick PCC type C2, 1:3:6 using 40 mm graded crushed stone aggregate) as in plinth protection, cement concrete surfaces finished even and smooth without using extra cement all as specified and directed.

M&L treatment of soil under plinth protection using emulsion @ one litre per hole, 300 mm apart including drilling and plugging 12 mm dia holes with cement mortar 1:2 to match the existing floors all as specified and directed.

Dismantling plain or corrugated steel sheeting any gauge thickness including Nanital or similar pattern roof covering all as specified and directed.

S&F pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws all as specified and directed.

S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as in ridges, hips, valley, gutters all as specified and directed.

S&F 2 mm thick fibre glass reinforced translucent corrugated sheeting with two corrugations side lap fixed with J or L hooks and washer in roof, wall all as specified and as directed

S&F 1 mm thick plain, galvanised, mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275 all as specified and as directed

S&F Framed work such as roof trusses (framed), trussed purlins, crane gantries, rails and fastenings and heavy bracket framing (beam, tee, angle, channel or flat sections) including distance pieces, cleats, etc. Fe-410-W(Gde E-250) Quality A all as specified and directed.,

S&F steel work in tubular trusses including special washer etc., purlins, rafters, completer using ERW or induction butt welded tubes conforming to I.S 1161-1979 grade St.-240 all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for all as specified and as directed.

M&L for preparation of new or previously untreated surfaces of steel & iron work of any description over 10 cm in width or girth and applying two coats of synthetic enamel paint over and including a coat of red oxide primer all as specified and directed

M&L for preparation of old steel surfaces of steel and iron work of any description over 10 cm in width or girth and applying one coat of synthetic enamel paint over and including a coat of red oxide primer all as specified and directed

Taking down chowkats or frames with shutters (without taking off shutters from the frames) area exc 1.5 but n. Exc 4.00 sqm each and removing from site all as sepcified and directed.

S&F 2nd class hard wood plain solid straight chowkhats and frames, wrought, framed rebated on the solid rounded or chamferred, put together with glue pinned at joints including taking down chowkats with shutters all as specified and directed

S&F factory made plain framed panelled shutters 35mm thick of 2nd class hard wood (any number of panels) with panels of timber flat on both sides feather edges or panel of 9mm BWP commercial ply over 12mm thick veneered panticle board with commercial face veneers fixed to chowkhat . The size of rail and stile as per IS : 1003 (Part-1), kiln seasoned and chemically pressure treated all as specified and directed

M&L for preparing new surfaces of wood of any decription, not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer all, as specified and directed.

S&F mild Steel works as in bands, straps, hold fasts etc, conforming to IS-2062-2006 (Fe-290), embedded portion duly painted with bituminious paint and sanded all as specified and directed

M&L PCC (1:2:4), type B1 (using 20mm graded crushed stone aggregate) as in copings, bed plates, fixing of hold fasts and other similar works and the like including weathering, slightly rounded or chamfered angles and throating as directed including use and waste of necessary form work all as specified and directed

S&F Mild steel butt hinges medium weight, cold rolled, 100mm, ISI marked all as specified and directed

M&L barrel tower bolts of size 200 mm exturted section aluminium anodised all as specified and directed

S&F 150 mm long aluminium anodised handles or extruded section all as specified and directed.

S&F 300mm long Aluninium alloy, anodised, sliding door bolt with hasp , staple, (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts of extruded sections or cast-aluminium alloy all as specified and directed.

S&F Steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay with glazing bars, dovetailed or welded all as specified and directed

S&F framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 etc. complete all as specified and as directed.

S&F 3 mm thick sheet glass ordinary quality and glazing with oil putty in square nexc 0.5 Sqm in each pane all as specified and as directed.

Dismantling wall and ceiling boards (fibre, pulp, insulation boards/slabs/ blankets, any thickness, including cover fillets and any type of frame work etc. Complete all as specified and as directed

S&F For anodised aluminium snap grid of size 605 x 605mm frame work for false ceiling all as specified and directed.

S&F For hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long all as specified and directed.

S&F 4 mm thick non asbestos fibre cement building boards fixed or laid/ inserted to timber/GI/Aluminium framework with screws all as specified and directed.

Demolition of brick/stone boulder/PCC bloock masonry, built in cement mortar including all quoins, arches, pillars etc but excluding ashlar facings, dressed stone work and precast concrete articles all as specified and directed.

M&L precast solid block masonry in PCC 1:3:6 type C-1 (using 20mm graded crushed stone aggregate) wall exceeding 10 cm in width and built in cement mortar 1:6 all as specified and directed.

Taking down cement plaster on brick or stone walls or concrete surfaces, etc. including raking out joints, hacking for key scrubbing down with water all as specified and directed.

M&L rendering 10 mm thick on stone masonary surfaces in CM 1:6, finished surfaces even and smoth over and including dubbing out average 10mm thick on irregular face of walls in CM 1:6 complete all as specified and directed.

M&L rendering 10 mm thick on stone masonary surfaces in CM 1:4, finished surfaces even and smooth without using extra cement over and including dubbing out average 10mm thick on irregular face of walls in CM 1:6 all as specified and directed.

M&L rendering 10 mm thick on concrete surfaces in CM 1:6, finished surfaces even and smooth without using extra cement all as specified and directed.

M&L for preparing newly plastered surfaces of wall and applying two coats of oil bound distemper over one coat primer on walls all as specified and directed.

M&L for Preparation of newly plastered or unplastered surfaces of wall surfaces and applying two coats of cement base paint all as specified and directed.

All as per item No 41 above but two coat of cement base paint all as specified and directed.

M&L for complete removal of existing treatment and applying 3mm thick Birla wall care putty and applying two coats of Oil Bond distermper white or tinned over a coat of primer on walls all as specified and directed.

Taking down carefully copper/aluminium point wiring (light, fan, bell, socket or power) complete, including fixture and fittings such as switches, Ceiling rose, pendents, regulators, sockets, light fittings etc removing materials to store for keeping in safe custody or for taking credit and making good disturbed surfaces of walls, floors, etc. to match with the existing surfaces credit for above items should be made as per conditions separately all as specified and directed.

Taking down ceiling fan any size or any type all as specified and directed.

Taking down old and unsrevicable main incoming MCB DB TPN/SPN, main switch including MCCBs/MCBs and making good the disturbed surfaces t all as directed specified and directed.

Taking down carefully unserviceable Sub main wiring of any size and type, removing material from site for taking credit and making good the disturbed surfaces of walls, ceilings all as specified and directed.

M&L for point wiring for light/fan/Bell with FRLSH cable 1.5 sqmm PVC insulated (red for phase and black for neutral) unsheathed, multi stranded copper conductor 1100 volt grade in and including not less than 2mm thick and not less than 20mm width PVC casing/caping with all accessories and 1.50 sqmm green in colour PVC copper conductor cable for earth continuity conductor connected to common earth dolly including PVC box surface type with PVC Modular white plate cover for mounting fittings such as switches, sockets, fan regulators One light point controlled by one one way switch all as specified and directed.

All as per item No. 48 above but One fan point controlled by one way switch and one regulator.

All as per item No. 48 above but One 3 pin switch socket outlet 6A on independent board.

All as per item No. 48 above but One 3 pin socket outlet 6A on same board with other switches

All as per item No. 48 above but with cable size 2.5 sqmm for switch socket outlet point 16 A on independent board including 2.5 sqmm FRLHS cable PVC insulated unsheathed copper earth continuity conductor as earth wire and connected to earth dolly all as specified and directed.

M&L sub main wiring with four run single core PVC insulated unsheathed stranded copper conductor cable of size 6 sq mm drawn through and including heavy duty PVC conduit 25 mm or higher dia as required at site, totally concealed in walls /floors/ceiling etc including all conduit accessories /fitting/junction box/inspection covers etc of heavy grade, ISI marked with 6 Sqmm PVC insulated unsheathed stranded copper conductor as a continuous earth wire connected to earth dolly all as specified and directed. Note : (i) four run single core cable and one run of earth copper conductor and heavy duty PVC conduit will be measured and paid as one unit length.

M&L sub main wiring with four run single core PVC insulated unsheathed stranded copper conductor cable of size 10 sq mm drawn through and including heavy duty PVC conduit 25 mm or higher dia as required at site, fixing on walls /floors/ceiling etc including all conduit accessories /fitting/junction box/inspection covers etc of heavy grade, ISI marked with 10 Sqmm PVC insulated unsheathed stranded copper conductor as a continuous earth wire connected to earth dolly all as specified and directed. Note : (i) four run of single core cable and one run of earth copper conductor and heavy duty PVC conduit will be measured and paid as one unit length.

S&F switch Modular, one way 6 amps, 1 module all as specified and directed.

S&F switch Modular, one way 16 amps, 1 module all as specified and directed.

S&F socket modular 6A, 2/3 pin combined 2 module with all as specified and directed.

S&F socket modular 6A/16A, 2/3 pin combined 2 module all as specified and directed.

S&F modular fan regulator step type 120W, 2 module with all as specified and directed.

S&F ceiling rose, 3 phase PVC/polycarbonate isolated body, surface bakelite 65 x 50 mm, 3 terminal including PVC square block all as specified and directed.

Painting of ceiling fans complete, in situ with synthetic enamel paint by spraying including filling cavities with filler, one coat after cleaning all dust etc complete all as specified and directed.

Taking down and re-fixing of ceiling fan (M.D. supply) any size and any type, after cleaning and connecting up including provision of cable from ceiling rose or connector to fan all as specified and directed.

S&F LED linear Aluminium extruded chanel, powder coated with opaque diffuser for glare free light ( ready to use pack 20 Watt) with all accessories all as specified and directed.

S&F suspended architectural LED luminire provide soft -light and glare free symmetrical iiiumination (with continuous mounting cap) all as specified and directed.

S&F LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V, AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cable of suitable size all as specified and directed.

M& Lamp holder, PVC/Polycarbonate type with back plate suitable for batten fittings all as specified and directed.

S&F LED Bulb 9 watt Make- Shakti and equivalent all as specified and directed.

S&F sheet metal enclosures VTPN as MCCB incomer and MCB TPN/SPN out going 4 way 415 V AC dubble door surface/ flush mounting made with CRCA sheet steel, powder coated Cat No 811888 IP 43 protection isolated neutral bar insulated bus bar assembly make INDOASIAN or equivalent all as specified and directed.

S&F MCCB 4 Pole, 415 Volts 50 HZ, of capacity 125 Amp 16 KA suitable for VTPN DB as incomer with spreader terminal Cat No 830273 Make INDO ASIAN, Ics= 100% of Icu or equivalent all as specified and directed.

S&F 415V 10KA 'C' curve miniature circuit breaker (MCB) of TPN 40 to 100 AMP current carrying capacity in the DB complete with connection testing and commissioningall as specified and directed.

S&F sheet metal enclosures MCB SPN- DB-08 way 230 V double door flush type with 200A rated bus bar all as specified and directed.

S&F 240 V, 10 KA 'B' curve miniature circuit breaker (MCB) of single pole and neutral (SPN) with current carrying capacity 32 Amp in the MCB DB complete with connection testing and commissioning all as specified and directed.

S&F SHEET METAL ENCLOSURES 415 V Triple pole and earth encolsure with a three pin and earth plug with socket complete with one triple pole MCB 32Amp all as specified and directed.

S&F 240 V, 10 KA 'B' curve miniature circuit breaker (MCB) of single pole (SP) and current carrying capacity 6 to 32 Amp in the MCB DB complete with connection, testing and commissioning all as specified and directed.

S&F LED fitting for Bldg security, 25 Watt 230 V, AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65 / 66 protection complete including conncting with 1.5 sq mm copper condector 3 core flexible cable from fitting connector to ceiling rose and fix on wall with clamps & nut bolts and necessary GI bracket made of 25 mm light grade GI pipe of 0.9 mtr lenth with necessary bending all as specified and directed

M&L for earthing complete with 600x600x6mm galvanised steel earth plate electrode buried vertically in ground (earth pit not less than 2.25 metre deep below normal ground level) with top edge of the plate at a depth of not less than 1.5m below ground level, connected to and including G.I. Wire of size 4 mm dia by means of bolts, nuts and check nuts and washers of galvanised steel, GI pipe 15 mm dia light grade pipe for protection of GI earth lead wire both to be provided to the extent of 7.5 metres as earthing lead and connecting to the equipment /machinery etc. including charcoal dust and common salt packed all around the earth plate in alternate layer in the earth pit all as per electrical plate No. 3 of SSR Part I-2009 including PCC chamber made up of PCC 1:3:6 type C1 & RCC Chamer cover of size 540x540x100 mm made with 1:2:4 Type B1 using 8 mm TMT bar for for reinforcement and handle, 20 mm dia medium grade G.I. watering Pipe from top edge of the earth plate upto M.S. funnel with wire mesh provided inside the concrete earth pit for watering arrangement including excavation and earth work in any type of strata and testing on completion all as specified and directed.

H S TAKHI (BID ID -3448834)

M/s Vishal Construction (BID ID -3451370)

Mehta Construction Co. (BID ID -3446120)

UNIQUE ENGINEERS (BID ID -3451680)

Mukund Engineers and Contractors (BID ID -3443431)

RAJENDRA CONSTRUCTION (BID ID -3447963)

Bidder Name

H S TAKHI

Mehta Construction Co.

agarwal and company

RAJENDRA CONSTRUCTION

UNIQUE ENGINEERS

Mukund Engineers and Contractors

M/s Vishal Construction