REPAIR/ MAINT OF STEEL AND WOODEN FURNITURE ITEMS OF MAP ACCN UNDER GE I GOS

Amount

Table Writing (Drg No FD-249, 268, 275) Removing old damaged top,S & F new Top of 18 mm thick pre-laminated praticle board, as per existing shape and size,provided hard pvc toe to each leg ,all as per drg or as directed by Engr-in-Charge.

Removing old damaged legs , S & F new legs of 35 x 55 mm thick as per existing shape and size, as per drg or directed by Engr-in-Charge.

All as per item No 01 above but front/rear rail.

All as per item No 01 above but side rail

All as per item No 01 above but side stiffner.

All as per item No 01 above but shelves.

All as per item No 01 above but centre stiffner.

Removing old damage handle S&F New handle 100 mm long CP, all as specified shape, size, drg or as per directed by Engr-in-Charge.

Removing old damaged Shutter , S & F new Shutter made of 19 mm thick MDF board, as per existing shape and size,replaced unsv knobs, all as per drg or directed by Engr-in-Charge. .

All as per item No 01 above but drawers.

Removing old damaged bottom ply of drawer , S & F new 6 mm thick bottom ply of drawer as per existing shape and size all as per drg or directed by Engr-in-Charge. .

Removing old damaged back side ply of drawer , S & F new 12 mm thick back side ply of drawer as per existing shape and size all as per drg or directed by Engr-in-Charge. .

Removing old damaged left/right side ply of drawer , S & F new 12 mm thick left/right side ply of drawer as per existing shape and size all as per drg or directed by Engr-in-Charge. .

M&L for applying polyurethane (P.U.) wood polish all exposed wood surface as per drg or as directed by Engineer-in-Charge.

Table Centre (Drg No FD-235, 274) Removing old damaged top,S & F new Top of 18 mm thick pre-laminated praticale board, as per existing shape and size,provided hard pvc toe to each leg ,all as per drg or as directed by Engr-in-Charge

Removing old damaged legs , S & F new legs of 30 x 60 mm thick as per existing shape and size, as per drg or directed by Engr-in-Charge.

All as per item No 15 above but long Rail.

All as per item No 15 above but stort rail

All as per item No 15 above but stiffner.

M&L for applying polyurethane (P.U.) wood polish all exposed wood surface as per drg or as directed by Engineer-in-Charge.

Chair Varandha (PVC) (FD-19, 359, FD/MAP-II/07) Removing UNSV seat & back plastic sheet, S&F new seat & back plastic sheet as per drg or as directed by Engr -in- Charge.

M&L for welding to damage/decayed steel frame all as per drg or as directed by Engr-in-Charge.

Removing unsv plastic shoes from chair, S&F new hard PVC shoes of best quality as per drg or as directed by Engr-in-Charge.

S&F flat iron 20x3mm thick nos 2 welded to steel frame to support chair as directed by Engr-In-Charge.

M&L for painting steel surface with two coat of white synthetic enamel paint as per drg or as directed by Engr-in-Charge.

Table dining 6/8 person (Drg No FD-239,269,273) Removing old damaged top,S & F new 18 mm thick pre-laminated praticale board Top as per existing shape and size,provided hard pvc toe to each leg ,all as per drg or as directed by Engr-in-Charge.

Removing of old damage leg, S&F new 40 x 75 mm thick leg made of 1st class season teak, all as per drg or as per existing shape and size directed by Engr-in-Charge.

All as per item No 26 above but long rail.

All as per item No 26 above but stiffner

All as per item No 26 above but short rail

M&L for applying polyurethane (P.U.) wood polish all exposed wood surface as per drg or as directed by Engineer-in-Charge.

Sofa Set 5 seaters with cushion (Drg No FD-281, FD/MAP/06) Removing of old damage seat and back cushion from Sofa Set 5 Seater , S & F New cushion of 100 mm thick 40 density make sleep well/Kurlon duly upholster with tepstry cloth not less than Rs. 250/- Per meter of best quality approved shade as per drg or as directed by Engineer-in-Charges.

Table Dressing Gents with Mirror (Drg No FD/E6/MAP/16 ) Removing of old damage mirror S&F new mirror of 5 to 5.5mm thick mirror as per drg or as directed by Engineer-In-Charge.

Removing of old damage drawers, S&F new drawers of 12/6 mm thick commercial BWR quality ply with knobs as per drg or as directed by Engineer-In-Charge.

Removing of old damage Top S&F New Top of 12 mm thick pre-laminated particale board,as per drg or as directed by Engineer-In-Charge.

Removing of old damage left/right side S&F new left/right side of 12 thick pre-laminated particale board, as per drg or as directed by Engineer-In-Charge.

Removing of old damage back side Ply,S&F new back side Ply as per drg or as directed by Engineer-In-Charge.

Removing of old damage bottom ply, S&F new bottom of 6 mm thick commercial BWR quality ply as per drg or as directed by Engineer-In-Charge.

Removing of old damage back side 6mm ply of mirror, S&F new back side 6mm ply for mirror as per drg or as directed by Engineer-In-Charge.

Removing of old damage long rail of mirror frame including beading , S&F new 25 x 35 mm thick long rail of mirror frame including fitting as per drg or as directed by Engineer-In-Charge.

Removing of old damage short rail of mirror frame including beading , S&F new 25 x 35 mm thick short rail of mirror frame including fitting as per drg or as directed by Engineer-In-Charge.

M&L for applying polyurethane (P.U.) wood polish all exposed wood surface as per drg or as directed by Engineer-in-Charge.

Bed Hard Steel (Drg No FD-FD/MAP/E6/08R) Removing of old damage 12mm BWR ply wood, S&F 12mm BWR ply wood ISI marked as per drg or as directed by Engineer-In-Charge. .

M&L for welding to damage/decayed steel frame all as per drg or as directed by Engr-in-Charge.

M&L for painting steel surface with two coat of Black synthetic enamel paint as per drg or as directed by Engr-in-Charge.

Chair Revolving High back & Computer steel (Drg No FD/E6/MAP/01, TP) Removing of damage UNSV seat cushion, S&F new seat cushion of 75mm thick 32 density duly upholstery complete all as per specification or as directed by Engr-in-Charge.

Removing of damage old UNSV back cushion rest, S&F new back rest cushion of 75 mm thick 32 density duly upholstery complete all as per specification or as directed Engr-in-Charge.

Removing of damage UNSV Hydrolic spring , S&F new Hydrolic spring to chair revolving complete all as per specification or as directed Engr-in-Charge.

Removing of damaged old UNSV arm rest, S&F new arm rest as per existing shape and size all as per drg or as directed by Engr-in-Charge.

Removing of damage old UNSV Base frame , S&F new Base frame iron/PVC to chair revolving complete all as per specification or as directed Engr-in-Charge.

Removing of damage old UNSV wheel S&F new wheel to chair revolving complete all as per specification or as directed Engr-in-Charge.

M&L for spray painting with of synthetic enamel paint black as per drg or as directed by Engr-in-Charge.

Chair writing Officer steel (FD/E6/MAP/12) Removing of damage UNSV seat cushion, S&F new seat cushion of 75mm thick 32 density duly upholstery complete all as per specification or as directed by Engr-in-Charge.

Removing of damage UNSV back cushion rest, S&F new back rest cushion of 75 mm thick 32 density duly upholstery complete all as per specification or as directed Engr-in-Charge.

M&L for welding to damaged/decayed steel frame with arc welding as per std workmanship or as directed by Engr-in-Charge.

Removing of damaged/UNSV arm rest, S&F new arm rest as per existing shape and size all as per drg or as directed by Engr-in-Charge.

S&F flat iron 20x3mm thick welded to steel frame to support chair as directed by Engr-In-Charge.

Removing UNSV plastic shoes from chair, S&F new plastic shoes of best quality as per drg or as directed by Engr-in-Charge.

M&L for spray painting with of synthetic enamel paint black as per drg or as directed by Engr-in-Charge.

Almirah large steel with shelve & half hanging (Drg No FD-FD/E6/MAP/18, 1031, 104 (M)) Removing old worn out damaged base legs, S&F 1mm thick MS new legs as per existing shape and size as per drg or directed by Engr-in-Charge.

All as per item No 60 above but shelves

All as per item No 60 above but shutter

All as per item No 60 above but base/ top sheet

Removing of old damaged door lock, S&F new door lock as per sample or as directed by Engineer-in-Charge.

Removing of old damaged CP handle, S&F New CP handle as per sample as directed by Engineer-in-Charge.

M&L for welding to damaged/ decayed steel frame with arc welding as per std workmanship or as directed by Engr-in-Charge.

M&L for spray painting with synthetic enamel paint OG as per drg or as directed by Engr-in-Charge.

Teapoy (Drg No FD-232, 278, 34) Removing old damaged top, S & F new 18 mm thick pre-laminated praticale board Top as per existing shape and size,provided hard pvc toe to each leg ,all as per drg or as directed by Engr-in-Charge.

Removing of old damage leg, S&F New 30 x 50 mm thick leg made of 1st class season teak, all as per drg or as directed by Engineer-In-Charge.

All as per item No 68 above but long rail.

All as per item No 68 above but short rail .

All as per item No 68 above but stiffner.

M&L for applying polyurethane (P.U.) wood polish all exposed wood surface as per drg or as directed by Engineer-in-Charge.

Charpoy IP hard top steel (Drg No FD/E6/MAP-II/01) Removing of old damage 12mm BWR ply wood, S&F 12mm BWR ply wood ISI marked as per drg or as directed by Engineer-In-Charge. .

M&L for welding to damage/decayed steel frame all as per drg or as directed by Engr-in-Charge.

M&L for painting steel surface with two coat of Black synthetic enamel paint as per drg or as directed by Engr-in-Charge.

Table bed side (Drg No MAP/E6/15) Removing of old damage Top of Table bed side S & F new 18 mm thick pre-laminated praticale board Top, as per drg or as per existing shape and size directed by Engr-in-Charge.

Removing of old damage left/right side, S & F new 12 mm partical board with teak venreed OSD left/right side as per drg or as directed by Engineer-In-Charge.

Removing of old back side, S&F new 6 mm ply BWR quality to back side as per drg or as directed byf Engineer-In-Charge.

Removing of old damage shelves and bottoms, S&F New 19 thick MDF board shelves as per drg or as directed by Engineer-In-Charge.

Removing old damage handle S&F New handle 100 mm long CP, all as specified shape, size, drg or as per directed by Engr-in-Charge.

M&L for applying polyurethane (P.U.) wood polish all exposed wood surface as per drg or as directed by Engineer-in-Charge.

Table Dressing Ladies with Mirror (Drg No FD/E6/MAP/11) Removing of old damage mirror S&F new mirror of 5 to 5.5mm thick mirror as per drg or as directed by Engineer-In-Charge.

Removing of old damage drawers, S&F new drawer of 12/6 mm thick commercial BWR qualithy playwood with knobs as per drg or as directed by Engineer-In-Charge.

Removing of old damage Top S&F new Top of 19 mm thick pre-laminated praticale board as per drg or as directed by Engineer-In-Charge.

Removing of old damage left/right side and centre protion S&F new left/right side & centre protion of 19 mm thick pre-laminated particale board as per drg or as directed by Engineer-In-Charge.

Removing of old damage back side ply,S&F new back side Ply of 6 mm thick commmercial BWR quality, as per drg or as directed by Engineer-In-Charge.

Removing of old damage leg , S&F new leg as per drg or as directed by Engineer-In-Charge.

Removing of old damage bottom ply , S&F new 12 mm thick bottom commercial BWR quality ply as per drg or as directed by Engineer-In-Charge.

Removing of old damage glass shutter with aluminum channel, S&F new glass shutter with aluminum channel as per drg or as directed by Engineer-In-Charge.

Removing old damage handle S&F New handle 100 mm long CP, all as specified shape, size, drg or as per directed by Engr-in-Charge.

Removing old damage channel S&F New Telescopic channel stainless steel, all as specified shape, size, drg or as per directed by Engr-in-Charge.

Removing of damage old UNSV wheel S&F new wheel to stool revolving complete all as per specification or as directed Engr-in-Charge.

M&L for applying polyurethane (P.U.) wood polish all exposed wood surface as per drg or as directed by Engineer-in-Charge.

Bin Linen multipurpose (Drg No FD-E6/MAP/09) Removing of old damaged top S&F New Top of pre-laminated partical board of 18 mm thick as per existing shape & size, all as per drg and directed by Engineer-in-Charger.

Removing old damage left/right side pre laminated partical board, S&F New left/right side pre laminated practical board of 18 mm thick all as per drg and directed by by Engr-in-Charge.

Removing of old damaged drawer S&F new drawer of 18 mm thick pre-laminated praticle board existing shape and size all as per drg or as directed by Engineer-in-Charger.

Removing old damage shutter S&F New shutter of 18 mm thick pre-laminated praticle board as per existing shape and size, drg or as directed by Engr-in-Charge.

Removing old damange legs S&F New legs as per existing shape and size as per drg or as directed by Engr-n-Charge.

Removing old damage handle S&F New handle 100 mm long CP, all as specified shape, size, drg or as per directed by Engr-in-Charge.

M&L for applying polyurethane (P.U.) wood polish all exposed wood surface as per drg or as directed by Engineer-in-Charge.

Charpoy Folding with hard top (Drg No FD - 388 (R)) Removing of old damage 09 mm BWR ply wood, S&F 09 mm BWR ply wood ISI marked as per drg or as directed by Engineer-In-Charge. .

M&L for welding to damage/decayed steel frame all as per drg or as directed by Engr-in-Charge.

M&L for painting steel surface with two coat of OG synthetic enamel paint as per drg or as directed by Engr-in-Charge.

Side Board (Drg No FD-241, 371) Removing of old damage Top Board S&F new Top Board as per drg or as directed by Engineer-In-Charge.

Removing of old damage left/right side board S&F New 18 mm thick pre-laminated praticle board left/right side board as per drg or as directed by Engineer-In-Charge.

Removing of old back side ply , S&F new 6 mm thick back side BWR quality ply as per drg or as directed byf Engineer-In-Charge.

Removing old damaged Shutter , S & F new 19 mm thick pre-laminated particle board Shutter as per existing shape and size,replaced unsv knobs,handle and hinges, all as per drg or directed by Engr-in-Charge. .

Removing of old damage drawers, S&F new 12 mm thick drawers of BWR quality ply with knobs as per drg or as directed by Engineer-In-Charge.

S&F 18mm thick teak veneered parctical board of exterior grade-1 OSD to drawer front side as per specified and directed by Engineer-in-Charge.

Removing of old damage shelves, S&F new 19 mm thick BWR ply shelves as per drg or as directed by Engineer-In-Charge.

Removing old damage handle S&F New handle 100 mm long CP, all as specified shape, size, drg or as per directed by Engr-in-Charge.

M&L for applying polyurethane (P.U.) wood polish all exposed wood surface as per drg or as directed by Engineer-in-Charge.

Table Peg (Drg No FD-266,277) Removing old damaged top,S & F new 18 mm thick pre-laminated praticale board Top, as per existing shape and size,provided hard pvc toe to each leg ,all as per drg or as directed by Engr-in-Charge.

Removing of old damage leg, S&F New 30 x 50 mm thick leg made of 1st class season teak, all as per drg or as directed by Engineer-In-Charge.

All as per item No 114 above but long rail.

All as per item No 114 above but short rail .

M/L for applying polyurethane (P.U.) wood polish all exposed wood surface as per drg or as directed by Engineer-in-Charge.

Chair Dining Officer. (Drg No FD-MAP/02, FD-E6/MAP/10R) Removing old damged seat cushion from chair, S&F New seat cushion of 75 mm thick 40 mm dinesity Sleep Well/Kurlone duly upholes by with tepestory cloth not less than Rs 250/- per mtr of approved all as specified as per drg and directed by Engr-in-Charge.

Removing of old damaged seat ply S&F New seat ply 6 mm thick BWR quality as per existing shape and size or drg and directed by Engr-in-Charge.

Removing of damaged front leg ,S&F Front leg of 2nd class HW sal wood, as per drg or as directed by Engr-in-Charge.

All as per item No 119 above but rear leg.

All as per item No 119 above but side rail.

All as per item No 119 above but front rail.

All as per item No 119 above but rear rail.

All as per item No 119 above but back rest.

All as per item No 119 above but stiffner.

M&L for applying polyurethane (P.U.) wood polish all exposed wood surface as per drg or as directed by Engineer-in-Charge.

Teapoy Varandha Steel (Drg FD-255, 383) Removing old damaged top, S&F new top of 18 mm thick pre-laminated praticale board as per existing shape and size all as per drg are as directed by Engr-in-Charge.

M&L for welding to damage/decayed steel frame all as directed by Engr-In-Charge.

Removing UNSV plastic shoes from leg, S&F new hard PVC shoes each leg best quality as per drg or as directed by Engr-in-Charge.

M&L for painting steel surface with two coat of white synthetic enamel paint as per drg or as directed by Engr-in-Charge.

Hat Stand with Mirror (Drg No FD-206,233) Removing of old damage mirror S&F new mirror of 5 to 5.5mm thick mirror as per drg or as directed by Engineer-In-Charge.

Removing of old damage back side ply , S&F new back side ply 6 mm thick BWR quality as per drg or as directed by Engineer-In-Charge.

Removing old damage front ply, S&F new front ply 4mm thick BWR quality one side teak face as per drg or as directed by Engineer-in-Charge.

Removing of old damage hooks, S&F new brass hook to Hat stand and all as per drg or as directed by Engineer-In-Charge.

M&L for applying polyurethane (P.U.) wood polish all exposed wood surface as per drg or as directed by Engineer-in-Charge.

Table Computer (TP, FD/E6/MAP/03) Removing old damaged top, S&F new Top as per existing shape and size, all as per drg or as directed by Engr-in-Charge

Removing old damaged tray S&F new tray as per existing shape and size, all as per drg or as directed by Engr-in-Charge

Removing old damaged shelf S&F new shelf as per existing shape and size, all as per drg or as directed by Engr-in-Charge

Removing UNSV plastic shoes from Leg and S&F new hard plastic shoes of best quality of each leg as per drg or as directed by Engr-in-Charge.

Removing old damage channel S&F New Telescopic channel stainless steel, all as specified shape, size, drg or as per directed by Engr-in-Charge.

M&L for applying polyurethane (P.U.) wood polish all exposed wood surface as per drg or as directed by Engineer-in-Charge.

TV Trolly (TP, FD/E6/MAP/04 (R)) Removing of old damage Top of TV Trolly S & F new 18 mm thick pre-laminated praticale board Top, as per drg or as per existing shape and size directed by Engr-in-Charge.

Removing of old damage left/right side, S & F new 18 mm partical board with teak venreed OSD left/right side as per drg or as directed by Engineer-In-Charge.

Removing of old back side, S&F new18 mm partical board with teak venreed OSD to back side as per drg or as directed byf Engineer-In-Charge.

Removing of old damage Fornt Glass , S&F New Front Glass size 600mm X 300mm x 6mm thick with wooden frame as per drg or as directed by Engineer-In-Charge.

Removing of old damaged bottom of table, S&F New 18 mm partical board with teak venreed OSD bottom as per drg or as directed by Engineer-in-Charge.

Removing of damage old UNSV wheel S&F new wheel to chair revolving complete all as per specification or as directed Engr-in-Charge.

Removing old damage channel S&F New Telescopic channel stainless steel, all as specified shape, size, drg or as per directed by Engr-in-Charge.

M&L for applying polyurethane (P.U.) wood polish all exposed wood surface as per drg or as directed by Engineer-in-Charge.

Chair Easy with cushioned (Drg No FD- 358) Removing old damged seat & back cushion from chair, S&F New seat & back cushion of 75 mm thick 40 mm dinesity Sleep Well/Kurlone duly upholstery by with Rexine Fabric not less than Rs 500/- per mtr of approved all as specified as per drg and directed by Engr-in-Charge.

Removing of old damaged seat & back ply S&F New seat & back ply 6 mm thick BWR quality as per existing shape and size or drg and directed by Engr-in-Charge.

Removing of damaged front leg ,S&F Front leg of 2nd class HW sal wood, as per drg or as directed by Engr-in-Charge.

All as per item No 152 above but rear leg.

All as per item No 152 above but side rail.

All as per item No 152 above but front rail.

All as per item No 152 above but rear rail.

All as per item No 152 above but back rest.

All as per item No 152 above but stiffner.

All as per item No 152 above but arm rest.

M&L for applying polyurethane (P.U.) wood polish all exposed wood surface as per drg or as directed by Engineer-in-Charge.

Bench cushion with back rest (FD-1048) Removing old damage UNSV sheet/ plank with foam & leather rexine, S&F new plank of 20 mm thick 5'x1' wide with foam of 50 mm thick 40 deniksty & leather rexine as per existing shape and size all as per drg and as directed by Engineer-in-Charge

Removing old damage UNSV front/rear leg, S & F New front/rear leg of 1 mm thick MS square pipe as per existing shape and size all as per drg or directed by Engr - In-Charge.

M&L for welding to damage/decayed steel frame with arc welding as per std workmanship or as per directed by Engr-in-Charge.

M&L for spray painting with synthetic enamel OG paint and polyurethane (P.U.) wood polish all exposed wood surface as per drg completed as specified as directecd by Engr-in-Charge.

ABC CONSTRUCTION COMPANY (BID ID -3311088)

M/s Bapujee Builders and Traders (BID ID -3311049)