SPL REPAIR TO LOW TENSION DISTRIBUTION SYS WITH CONNECTED ACCESSORIES AT ENGR REGT UNDER GE 865 EWS LEH

M&L for excavation in trenches not exceeding 1.5m in wide and not exceeding 1.5 m in depth for laying of pipe, poles etc and getting out in any type of soil, complete all as specified and directed by Engr-in-charge.

M&L for Sand cushioning to underground cables 8 cm below the cable before laying & 15 cm above the cable after laying, complete all as specified in clause 19.75 of SSR Par-I, complete all as specified and directed by Engr-in-charge. Note : Punned thickness will be measured and paid for.

Supply and laying of factory made, machine pressed, unreinforced, pre-cast concrete cable cover class LV type-1 flate size 250mm x 150mm x 40mm, complete all as specified and directed by Engr-in-charge.

Labour only for laying of old serviceable cable covers retrieved from excavation complete all as specified and directed by Engineer-in-Charge.

M & L for returning, filling in including spreading leveling watering and well ramming in layers not exc. 25 cm thick, complete all as specified and directed by Engr-in-charge.

M & L for removing surplus soil to a distance not exc. 50 M and depositing where directed at a level not exceeding 1.5 Mtr above the starting point, complete all as specified and directed by Engr-in-charge.

M&L for PCC 1:4:8 type D2 using 40 mm graded crushed stone aggregate as in foundation, filling mass concrete including necessary form work, complete all as specified and directed by Engr-in-charge.

M&L for PCC 1:3:6 type C 1 (using 20 mm graded crushed stone aggregate) as in block masonry with solid block ,exc 10 cm in width and setting in mortar complete for coping of pole including necessary from work and fair finish to the exposed surface area without using extra cement, complete all as specified and directed by Engr-in-charge.

Material and labour fpr cement concrete in foundation, filling and mass concrete type B2 1:2:4 with using 40mm graded crushed stone aggregate, complete all as specified and directed by Engr-in-charge.

M&l for Pin type, porcelain, vitreous, white, brown or green insulator including one galvanised mild steel spindle, two galvanised iron washers and one galvanised iron nut, 100mm height, 65mm dia for 1100 volts grade, complete all as specified and directed by Engr-in-charge.

Dismantling of old unsv poles and supply and fixing, Steel tubular swaged street light poles complete with pole arms 1.2 m & cast iron base plate, finial taper plug, bolts,nuts and screws as specified type 410 SP-31 9.0 mtr long and painting with two coat of aluminium paint over one coat of primer on pole, complete all as specified and directed by Engr-in-charge. Note :- Excavation and earth work shall be measured and paid separately under respective item.

Supply, laying & testing of heavy duty, XLPE insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables with stranded aluminium conductor, 1100 volts grade, of size 50 sqmm 3.5 core in trences or passing through pipes, ducts or fixed to walls/poles, including taking down old unserviceable cable, complete all as specified and as directed by Engr-in-Charge. Note :- Excavation and earth work shall be measured and paid separately under respective item.

Supply, laying & testing of heavy duty, XLPE insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables with stranded aluminium conductor, 1100 volts grade, of size 95 sqmm 3.5 core in trences or passing through pipes, ducts or fixed to walls/poles, including taking down old unserviceable cable, complete all as specified and as directed by Engr-in-Charge. Note :- Excavation and earth work shall be measured and paid separately under respective item.

Supply, laying & testing of heavy duty, XLPE insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables with stranded aluminium conductor, 1100 volts grade, of size 120 sqmm 3.5 core in trences or passing through pipes, ducts or fixed to walls/poles, including taking down old unserviceable cable, complete all as specified and as directed by Engr-in-Charge. Note :- Excavation and earth work shall be measured and paid separately under respective item.

Supply and fixing of, off load change over switch 415 Volts in sheet metal enclosure 4 pole of capacity 400 Amps, including taking down old unserviceable change over switch, complete all as specified and directed by Engr-in-charge.

Supply and fixing of cross arms braciing support clamps, back plates fabricated from steel section made out of Fe-0-310/Fe-0-410 including nuts, bolts and washers welding, drilling hole complete with two coats of aluminium paint over one coat of primer, including taking down old unserviceable cross arms, complete all as specified and directed by Engr-in-charge.

M&L for ACSR conductor any size drawn straight horizontal on over head lines on existing poles including binding with insulators. Weight of ACSR conductor shall be measured straight horizontal distance between centre of two adjacent poles and compounding the weight of conductor of that size and length by adding 3% extra for sag, jointing jumpers,etc, including taking down old unserviceable ACSR conductor, complete all as specified and directed by Engr-in-charge.

M & L for spray for painting and numbering of electric poles including street light brackets, cross arms with two coats of aluminium duco paint after cleaning and preparing the surface of poles of any size, complete all as specified and directed by Engr-in-charge.

Supply and fixing of LED street light fitting 70 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics with IP 65/66, including taking down old unserviceable LED street light fittings, complete all as specified and directed by Engr-in-charge.

Deduct Schedule of Credit of Rs (-) 55970.00 (Minus) as listed in Schedule 'A' (Contd). Contract Sum shall be arrived after deducting the credit amount. Note :- Tenderers will not quote against this item being a firm amount.

Please Enable Macros to View BoQ information