SPECIAL REPAIRS RENOVATION OF STUDENTS STAFF TOILETS AT NAVY NAGAR UNDER GE NW NAVY NAGAR

Amount

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises

Material & labour for Non - skid coloured ceramic tiles of size 300mm x 300mm x 6 to 7 mm thick in floors over and including 15 mm thick screed bed in cement mortar 1:4 etc. set and jointed in neat cement slurry and grouted with Epoxy grout to match (Note : Cost of 15 mm thick screed bed and epoxy grouting is included in the rate). (Make : Kajaria/Somany/Johnson)

Material & labour for glazed ceramic tiles in vertical surface 300 x 200 x 7mm thick set and jointed in neat cement slurry over and including 10 mm thick cement plaster in cment mortar 1:4 and pointed in white or colour cement to match (Note : The rates include the cost of 10 mm thick plastering ) (Make : Kajaria/Somany/Johnson)

Material & labour for vetrified Ceramic tiles 10 mm thick (square/ rectangular) polished, of size 600x600 , in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed in cement mortar 1:4 etc. set and jointed in neat cement slurry and grouted with epoxy grout to match (Note : Cost of 15 mm thick screed bed is included in the rate). (Make : Kajaria/Somany/Johnson or equivalent)

Material & labour for 20-22 mm thick granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like over and including 15 mm thick plaster in cement mortar 1:4 and pointed with white cement using marble dust with admixture of pigment to match the shade of marble slab including grinding and polishing complete (Note : The rates included the cost of cement mortar 15 mm thick)

Supply & fix chinaware under counter wash basin (size 550 mm x 425 mm x 195 mm) (Make : Hindware/Jaquar or equivalent) including CP waste coupling and PVC waste pipe

Supply & fix brass chromium plated pillar cock with auto closing system fixed at counter top complete all as directed and as specified. (Make Hindware/Jaquar or equivalent)

Supply & fix in repairs vitreous china Full stall urinal complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60 mm long brass screws, pointing around urinal back in cement.

Material & labour for urinal spreader of PTMT any colour for fixing with 15 mm dia pipe. (Minimum weight 60gms)

Material & labour for in repairs vitreous china wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) including connection to trap/drain (or outgoing pipe) and to flushing pipe, antisyphonage pipe etc complete including making good to floor (Make : Hindustan/Parryware/Cera)

Material & labour for plastic water closet seat, black, closed pattern with recessed bottom, and cover and mild steel chromium plated or aluminium hinging device (Make : Hindustan/Parryware/Cera)

Supply & fix CP Jet with 600 mm long connection pipe fixed to water closet pedestal pattern complete all as spfd & directed fixed in repairs.

Supply & fix in repairs vitreous china squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests (excluding flushing cistern and flush pipe ) and trap set in and concrete including provision of lime concrete bedding

Material & labour for 10 ltrs capacity PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets in repairs (Make : Commander/Parryware/Cera)

Supply & fix 15 mm brass chromium plated Bib Cock with flange (Make : Hindware/Jaquar or equivalent)

Supply & fix 15 mm brass chromium plated angular stop cock (concealed) with flange (Make : Hindware/Jqquar or equivalent)

Supply & fix PVC connectors of 15 mm size with PTMT nuts of length 600 mm length

Supply & fix 100mm bore CI floor trap with gratings incl jointing to waste pipe in run lead.

Taking down cement plaster of any discription including racking out joints hacking for key scrubbing down with water & removed debrises out MD land.

Demolition of concrete unreinforced of any description and in any position not otherwise specifically provided for including removing the debris from MD land

Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc.with water proofing compound Rendering 10mm thick plaster (1:3) on concrete surface. (water proofing compound will be paid seprately )

Material & labour for type E2 1:5:10 (40mm graded aggre-gate)cement concrete in sunken floors.

Demolition of brickwork or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles

Material & labour for brickwork with subclass ‘B’ bricks, straight or curved on plan exceeding 6m mean radius built in cement mortar (1:6)

Material & labour for brickwork with subclass ‘B’ bricks, straight or curved on plan to any radius in half brick thick walls built in cement mortar (1:4)

Material & labour for plastering 15 mm thick on other than fair faces of brickwok or concrete surfaces of wall in cm 1:6 and finishing the surface even and smooth without using extra cement and finally providing sagol finish complete

Material & labour for sand faced cement plaster 10 mm thick as in ceiling in CM (1:3), two coats using factory manufactured pre mix/ready mix plaster including using richer mix for making corners if necessary, at all places and level, including making grooves of existing size wherever required, including cleaning the surfaces, curing etc. complete all as per specifications & as directed by the Engineer-in-Charge Make :- 'Roofit Mix'of M/s Premier Floor to Roof Materials pvt.ltd/ 'Easy plast' of M/s Walplast Products pvt.ltd/ 'Readiplast' of M/s Ultratech cement Ltd/'Soundplast PMC-1' of M/s Sound buildcare pvt.Ltd

Taking down chawkhats or frame (w/o taking off shutters from the frames) but not excluding 1.50 each.

Taking down chawkhats or frame (w/o taking off shutters from the frames) but exceeding 1.50 but not exceeding 4.00 Sqm each.

Supply & fix MS holdfast, wall ties and semilar articles confirming to Fe-410-0 or Fe-310-0.

Material & labour for PCC (1:3:6) type CI (20mm graded agg) for fixing of hold fast.

Supply & fix solid PVC door frame of size 50mm x 47mm made out 5mm plain colour PVC sheet reinforced with MS square tube made as per specification and drawing. (Make : Sintex/Rajshree/Accucell)

Factory made solid panel pvc door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing. (Make : Sintex/Rajshree/Accucell)

Supply & fix 100mm size stainless steel butt hinges.

Supply & fix 150 mm long aluminium anodised barrel tower bolts of extruded section

Supply & fix 125mm size extruded aluminium alloy handles, fabricated type anodised.

Supply & fix Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed of length 300 mm

Supply & fix anodised aluminium (minimum thickness of anodising 15 micron) door /ventilator shutters, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc complete all as specified and directed

Supply & fix in repairs anodized aluminium DECO grills 7.5mm thick, as existing grills, DG - 102 including aluminium anodized F section

Supply & fix 5.5 mm thick frosted glass ordinary quality in square not exceeding 0.50 sqm each fixed to aluminium window frame.

Supply & fix Aluminium alloy wire cloth, 0.45 mm dia of wire and average width of aperture 1.40 mm and fixed with stainless wire staples complete

Preparing old plastered surfaces of wall and applying two coats of oil bound distemper over a coat of chalk whitening with wall putty complete (Make : Asian paints/Nerolac paints/Shalimar Paints)

All as per item No 43 here-in-before but on newly plastered surfaces of wall"

Material & labour for for preparation of old decorated surfaces of walls/soffits of chajjas and roof projections by washing the surfce thoroughly , filling the cracks, craves with crack-filling-compound (Make : DR FIXIT CRACK SHRINK FREE or Equivalent ) and applying one coat of acrylic emulsion exterior grade (100%) etc all as specified. Note : - (a) Old surface shall be cleaned with bleaching powder as specified and as per manufacturers instructions , all cracks shall be filled with white cement and sand mortar (1:3) by making V- grooves . (b) Acrylic painting shall be done with rollers.(c)Funges formation be cleaned throughly with wire brush or by any means.

Material & labour for for preparing old painted surfaces by washing, rubbing down and stopping of distempered and painted surfaces and applying a coat of distemper oil emulsion on surfaces of ceilings.

Excavating over areas, not exceeding 1.5 m deep and getting out in any type of soil

All as per item No 47 above but beyond 1.5 mtr of depth but not exceeding 3 mts

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceedingeeding 25 cm.

Removing excavated material not exceeding 50m and depositing where directed at a level not exceeding. 1.5 m above the starting point

Material & labour for cement concrete 1:4:8 type D-2 (using 40 mm graded aggregate) as in foundation , filling and mass concrete

Material & labour for Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips

All as per item No 52 above but 5 mm dia and over upto 10 mm dia as in stirrups etc

Material & labour for plain/ reinforced cement concrete type B1 1:2:4 (using 20 mm graded stone aggregate) cast in situ in lintels up to 1.5 M span, cills and other similar bands, plinth courses, parapets, copings, bed plates and the like including weathering, slightly rounded or chamfered angles and throating, as directed. including form work etc complete

Taking up or down 15 mm bore steel tubing and connections, including cleaning for refixing or removal to store

Taking up or down 20 mm bore steel tubing and connections, including cleaning for refixing or removal to store

Supply & fix 15 mm bore low density polyethylene pipes (LDPE) of pressure rating 6 Kgf/ Sqcm fixed complete to walls, ceilings or in floors etc.

Supply & fix 20 mm bore galvanized Steel tubes, medium grade with all fittings for water supply pipes etclaid in trenches

Supply & fix 20 mm bore stop valves, cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions.

Supply & fix towel rail 600 mm long / ring type of stailness steel fixed with and including chromimum plated brass screws and wooden plastic cleats (Min weight 190 gms)

Taking down Cast iron soil waste pipe (any size and patterns) mouldings all fittings heads, shoes, bends

Supply & fix cast iron sand cast pipes in any length with or without cement mortar laid on walls of 100 mm dia

Supply & fix cast iron sand cast pipes in any length with or without cement mortar laid on walls of 75 mm dia

Supply & fix Bends (any radius), diminishing pieces or tapers (larger bore measured) with oval doors of 100 mm dia

Supply & fix Bends (any radius), diminishing pieces or tapers (larger bore measured) with oval doors of 75 mm dia

Supply & fix Branch pieces, single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches fitted with oval access doors of bore 100 mm

Supply & fix Branch pieces, single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches without oval access door of Bore 100 mm

Supply & fix Branch pieces, double (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches fitted with oval access doors of bore 100 mm

Supply & fix Branch pieces, double (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches without oval access door of Bore 100 mm

Supply & fix Branch pieces, single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches fitted with oval access doors of bore 75 mm

Supply & fix Branch pieces, single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches fitted without oval access doors of bore 75 mm

Taking down & refixing PVC SWR 110/150 mm bore pipes single socketed in any lengths & to any height with rubber ring joints fixed to wall complete all as specified and directed.

Taking down & refixing CI pipes with ears soil waste pipe (any size and patterns) mouldings all fittings heads, shoes, bends etc

Material & labour for for stainless steel letters of height 30cm and cross sectional size 25mm x 15mm with closed ends, made out of 1.50mm thick stainless steel plate, including necessary cutting, welding, rounding etc complete and fixing at a height of maximum 3.00m all as specified and directed.

Material & labour for two coat of acrylic paint exterior grade (100%Acrylic) over a one coat of primer including prepartion of newly plasterd surfaces of walls etc all specified on external surfaces (Make : Asian Paint (Apex)/Nerolac (1sr quality)/Dulux (weather shield)

Eacavation in trenches in hard / dense soil not exceeding 1.5m depth and getting out all as specified and directed

Material and labour for concrete bed to drain including packing against the side of pipes with concrete after they are laid and tested 150m dia pipe with cement concrete 1:3:6 type C2 (using 40mm graded stone aggregate) all as specified and directed

Material and labour for salt glazed stone ware drain pipes 150mm dia conforming to IS grade 'A' laid in trenches and jointed as specified

Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendents, regulators, sockets, light fitting etc., removing materials for taking credit (credit for above items should be made as per conditions seperately) and making good disturbed surfaces of walls, floors, etc.

Material & labour for point wiring with PVC insulated unsheathed single core multistranded copper conductor 1.5sqmm, 1100Volts grade cable, FRLS, passing through PVC conduit including accessories and provision of PVC boxes for mounting switches, switch socket, fan regulator etc, as directed by Engineer-in-Charge including one run of PVC insulated unsheathed multistranded copper conductor cable 1.5sqmm (green colour) earth wire and connected to earth dolly for the following:-. Make of Cable : Havells/Finolex/L & T Make of Casing Capping : Poly Plast/Pressfit/Presto Plast Note : Circuit conductor from MCB DB to Switch boards should not be less than 2.5sqmm

(a) One light/ fan/ E'fan point controlled by one way switch

Supply & fix modular switch piano, 1 module, flush type, single pole, one way 6 Amps, 240 Volts. Make: Leader/ Kinjal/ Crabtree/ Anchor.

Supply & fix ceiling rose surface bakelite 65 x 50 mm with 3 terminals. Make: Leader/ Kinjal/ Crabtree/ Anchor.

Taking out old wooden/PVC board and disconnecting all electric connection from switches, board and Supply & fix modular metal flush box, screwless with silver border of 8 module for mounting of modular switches including blank plate for blank module. Make-Pressfit /Indoasian/ Crabtree/ Anchor

All as per Item No 83 above but of modular metal flush box, 6 module.

All as per Item No 83 above but of modular metal flush box, 4 module.

All as per Item No 83 above but of modular metal flush box, 3 module.

All as per Item No 83 above but of modular metal flush box, 1/2 module.

Supply & fix modular white cover plate with frame, 8 module.

Supply & fix modular white cover plate with frame, 6 module.

Supply & fix modular white cover plate with frame, 4 module.

Supply & fix modular white cover plate with frame, 3 module

Supply & fix modular white cover plate with frame, 2 module.

Supply & fix modular white cover plate with frame, 1 module.

Taking down unserviceable FTL and supply and fix Slim LED integrated batten of 20Watt 4ft coolday light with powder coated CRCA decorative patti prewired complete with two Nos of PVC box of size 75 x 75 x 20mm for mounting light fittings including ceiling rose complete. Make of Light Fitting : Wipro Cat Part No D53206520 watts or BN021CLED20SPSUCWGR2 of Philips or BCLSB20W WH LED of Bajaj.

All as per Item No 94 above but Slim LED integrated batten of 10 Watt 2ft complete. Make of Light Fitting : Wipro Cat Part No D53106520 Watts or BN021 LED 10S 6500 PSU GRS1 of Philips or BCLSB10WH LED of Bajaj

Material & labour for sheet metal enclosure for DBs when MCB 'C' characterstic, 10 KA to be used single phase 8 way, double door,240V having Din rail, Neutral & Earthing bar as per IS-8828 of 1996 DB sheet not less than 1.2mm with powder paint, min ingress protection shall be IP20, label indicators shall be provided over all incoming/outgoing circuit complete all as specified and directed.Make - LEGRAND Cat part No: 607711 or its equivalent in Siemens/ Hagar/ Schneider.

Supply & fix MCB SPN, up to 32 Amp, 10 KA, 230 Volt.Make - LEGRAND Cat part No: 408612 to 17 or its equivalent in Siemens/ Hagar/ Schneider.

Supply & fix MCB, single pole, upto 32 Amp, 10 KA, 230 Volt.Make - LEGRAND Cat part No: 408590 to 95 or its equivalent in Siemens/ Hagar/ Schneider.

Material & labour for submain wiring in PVC conduit using 2 runs of 6 sqmm PVC insulated stranded copper conductor, single core, FRLS incl single run of 4 sqmm stranded conductor as earth wire drawn in PVC conduit all as specified and as directed by Engineer-in-Charge.

Cutting hole in existing concrete or brick wall suitable for fixing 230/300/450mm sweep exhaust fan making good the hole including proper internal plaster work and surface finish in side and outside the hole as per site requirement complete all as specified and directed by Engineer-in-Charge.

Taking down deterioted louvers from site and supplying and fix new louvers flip type made out of 16SWG GI sheet with horizontal ventilation of size 45cmx45cm frame with min 3mm thick sheet strip, bending into round shape suitable for 300mm sweep exhaust fan complete all as specified and as directed by Engineer-in-Charge.

Taking out unserviceable exhaust fan, supply & fix in repair ventilation fan, 4 blade, heavy duty, double bearing, 230 V, 50 Hz, 300 mm sweep having power input 70 W, speed 1440 RPM, with protective bird guard including connection as required at site with flexible copper cable complete all as specified and as directed by Engineer-in-Charge and as per Hevells model-VENTIL AIR DB or equivalent in Khaitan/USHA/Almonard.

Unity Enterprises

ASHOK CONSTRUCTION

ORIENT ELECTRIC CO

BOB ENTERPRISES

M/s. MAYUR ENTERPRISES

Anil Industrial Corporation

sri ram construction