Repairing and Maintenance of Transit Camp of Siang Lower H E Project at Pasighat

Amount

Dismantling doors, windows, and clerstory windows (steel or wood) shutter including chowkhats, architrave, holdfast etc. complete and stacking within 50mtr leads. (a) Of area 3 Sqm and below.

Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead. (a)For thickness of tiles 10 mm to 25 mm

Half brick masonry (with best available local bricks) in Cement mortar 1: 4 (1 cement: 4 coarse sand) in the foundation and plinth

Extra for half brick masonary in superstructure above plinth level and up to floor two level

15 mm cement plaster of mix : 1:6 (1 cement:6 fine sand) on the rough side of single or half brick wall

12 mm cement plaster of mix : 1:6(1 cement: 6 fine sand)

Providing and laying Ceramic glazed floor tiles 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red, Brown laid on 20 mm thick Cement Mortar 1:4 (1 Cement : 4 Coarse sand) including pointing the joints with white cement and matching pigment etc., complete

Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make in all colors, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete.

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption’s less than 0.08% and conforming to IS : 15622 of approved make in all colours and shades, laid on 20mm thick cement mortar 1:4(1 cement: 4 coarse sand) including grouting the joints with white cement and matching pigments etc., complete Size of Tile 600x600 mm

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS : 1285, fixed with rawl plugs and screws or with fixing clips, or with expansion hold fasteners including necessary filling up of gaps at junctions, at top, bottom and sides with required PVC/neoprene felt etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing and panelling to be paid for separately): For fixed portion Powder coated aluminium (minimum thickness of powder coated 50 microns)

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS : 1285, fixed with rawl plugs and screws or with fixing clips, or with expansion hold fasteners including necessary filling up of gaps at junctions, at top, bottom and sides with required PVC/neoprene felt etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing and panelling to be paid for separately): For shutters of doors, windows & ventilators including providing and fixing hinges/pivots and making provision for fixing of fittings wherever required including the cost of PVC neoprene gasket required( Fitting shall be paid extra. Powder coated aluminium(minimum thickness of powder coated 50 microns)

Providing and fixing glazing in aluminum door, window, ventilator shutters and partitions etc. with PVC/ neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge. (Cost of aluminium snap beading shall be paid in basic item): With floated glass panes of 4.0 mm thickness.

Providing and fixing aluminium tubular handle bar 32 mm outlet dia 3.0 mm thick & 2100 mm long with SS screws etc. complete as per direction of Engineer-in - Charge. Powder coated minimum thickness 50 micron aluminium tubular handle bar

Providing two coats of acrylic water based wall putty/wall filter of Asian paints/Berger/Dulux over concrete/cement plaster/brick walls and ceilings both internal and external after removing all the loosely adhering material from the wall/ celing surface with the help of emery stone, putty blade or wire brush, mpostering the wall with the help of sufficient quantity of clear water as specified and directed by the department.

Applying one coat of cement primer of approved brand and manufacture on wall surface

Finishing walls with water proofing cement paint of approved brand and manufacture and of required shade on new work (three or more coats) to given an even shade.

Providing and fixing white vitreous china pedestal type (European type W.C. pan) water closet with seat and lid, with CP brass hings and rubber buffers, 12.5 litres white vitreous china low -level flushing cistern with fitting and brackets 40 mm white porcelain in enamel led flush and, 20 mm over flow pipe with specials and mosquito proof coupling of approved municipal desin complete including cutting and making good the walls and floors where required.(a)WC pan with white plastic seal and lid.

Constructing brick masonry manhole with 2nd class bricks in cement mortar 1:4 (1 cement: 4 coarse sand) R.C.C. top slab 1:2:4 mix(1 cement: 2 coarse sand: 4 graded stone aggregate 20 mm. nominal size) foundation concrete 1:4:8 mix(1 cement: 4 coarse sand:8 graded stone aggregate 40mm. nominal size) inside plastering 12 mm. thick with cement mortar 1:3 (1 cement: 3 coarse sand) finished with floating coat of neat cement finish and making channels in cement concrete 1:2:4( 1 cement: 2 coarse sand:4 graded stone aggregate 20mm. nominal size) finished with a floating coat of neat cement complete as per standard design Inside size 90 x 80 cm. and 45 cm. deep including C.I. cover with frame (light duty) 455 x 610 mm internal diamensions total weight of cover and frame to be not less than 38 kg. (weight of cover 23 kg and weight of frame 15 kg.)

Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: White Vitreous China Flat back wash basin size 550x 400 mm with single 15 mm C.P. brass pillar tap of heavy quality

Providing and fixing G.I. pipes complete with G.I. fittings and clamps, including cutting and making good the walls (internal work).(a) 15 mm dia nominal bore

Providing and fixing G.I. pipes complete with G.I. fittings and clamps, including trenching and refilling etc (external work) (b) 20 mm dia. nominal bore

Providing and fixing sand cast iron/cast iron(spun) soil, waste and vent pipes (a) 100mm dia.

Providing and fixing sand cast iron rest sanitary bend. (a) 100 mm dia

Providing and fixing sand cast iron single equal plain junction of requireed degree (a) 100x100x100 mm

Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms (a) 15 mm nominal bore

Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS 8931.(a) 15 mm nominal bore

Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS: 8931 (a) 15 mm nominal bore

Providing and fixing CP Brass Single lever telephonic wall mixer of quality & make as approved by Engineer in charge

Providing and fixing CP brass shower rose with 15 mm or 20 mm dia inlet. (b) 150 mm dia

Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings.

Providing and fixing 600x450 mm bevelled edge mirror of superior glass (of approved quality) complete with 6 mm thick asbestos sheets ground fixed to wooden cleadt with CP brass screws and washers

Providing and fixing 600x120 mm glass shelf with CP brass bracket and guard rail complete, fixed to wooden cleadts with CP brass screwsedges round and guard rail complete

Providing and fixing CP Brass towel rail complete with CP brass brackets fixed to wooden cleadt with CP brass screws (heavy quality) 600mm long towel rail. (a) 750 x 20 mm size

Providing and fixing toilet paper holder (a) CP Brass

Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. (b) Flexible pipr (i) 32mm dia

Providing and fixing aluminium sliding door bolts ISI marked anodized transparent or dyed to required colour or shade with nuts and screws etc complete (b) 250x16 mm

Providing and fixing aluminium tower bolts ISI marked anodised or transparent or dyed to required colour or shade with necessary screws etc. complete : (c)150x10 mm

M/S LALIT DOLEY (BID ID -3182381)

M/s. Y.M. Enterprise (BID ID -3179037)