GES/PKT/08/2024-25 REPAIR MAINT AND CLEANING OF SEWAGE LINE, MANHOLES, SEPTIC TANK AND REPAIR/ MAINT TO DRAINS , CULVERTS, FENCING, HARDSTANDING, FOOTPATH, COMPOUND WALL IN THE AREA OF OTG AND BHADORIYA COMPLEX UNDER GE SOUTH PATHANKOT

Amount

S&F of 150 mm dia RCC NP3 pipe laid and jointed complete including providing 100 mm thick cement concrete (1:4:8) type D-2 using 40mm graded crushed stone agg as in bed for pipes incl packing under and huaunching against the sides of pipes after they are laid tested including Taking down old damaged SGSW/UPVC/RCC pipes from existing lines including necessary excavation as per requirement of old fitted in trenches complete all as specified and directed.

S&F of 200 mm dia RCC NP3 pipe laid and jointed complete including providing 150 mm thick cement concrete (1:4:8) type D-2 using 40mm graded crushed stone agg as in bed for pipes incl packing under and huaunching against the sides of pipes after they are laid tested including Taking down old damaged SGSW/UPVC/RCC pipes from existing lines including necessary excavation as per requirement of old fitted in trenches complete all as specified and directed .

S&F of UPVC underground drawings pipe (UDS) type 'B' 200mm dia with wall thickness 4mm (min) and pressured 4 KN /Mtr Sq jointed in cement solvent complete including providing 150 mm thick cement concrete (1:4:8) type D-2 using 40mm graded crushed stone agg as in bed for 200mm bore pipes incl packing under and huaunching against the sides of pipes after they are laid tested including Taking down old damaged SGSW pipes from existing lines including necessary excavation of old fitted in trenches complete all as specified and directed .

All as per serial item No. 03 here-in-before but 160 mm dia complete all as specified and directed .

Cutting into existing manholes for connecting new drains, making good to pipe and making good of broken manhole.

M&L to attend and rectify sewage complaint on daily routine basis as per complaint lodged by user at complaint cell of AGE B/R Sub division by deploying manpower by Cleaning/clearing blockage of bathroom/kitchen/WC Indian/WC European by cleaning the Nahani trap/gully trap/floor trap/Intercepting trap/P or S trap/multi floor trap etc of any description and in any position below or above ground level at different locations ,flushing down with adequate water, removing & taking out of all materials such as sludge/ soil waste/polythene /mud/silt/liquid/semi liquid /semi solid/solid or any others items etc to make the entire system functional complete all as specified and directed. Note:- (i) The quoted rates shall be included for opening of access & closing properly. (ii) Contractor/supervisor take complaint from JE concerned all day and ensure to resolve all complaint within same day. In case of non attending complaints in same day, recovery @250 per complaint will be recovered from the contractor.

Cleaning and de-silting of manholes depth not exceeding 1.50 meter by pumping out/removing liquid waste/sewage/sludge and plugging the ends sewer pipes or diverting the flow into drains if necessary, removing silt, sludge, solids, semi solids etc, sprinkling bleaching powder on the silt to avoid bad smell including all precautionary and safety measures, such as safety belts, lighting arrangements face mask etc and removing the same(silt, sludge &other waste material) in leak proof trucks covered with tarpaulin to outside of MOD land all as per existing rules and regulations of civil authorities and flushing sewage line & manholes with adequate water as to make sewage line fully functional including reinstating the manhole cover to its original position complete all as specified and directed.

All as per Item No. 7 here-in-above but depth exc 1.5 mtr complete all as specified and directed.

Cleaning and de-silting of sewage lines of any dia bore at any depth by pumping out /removing liquid waste/sewage ,plugging the ends pipes or diverting the flow into drains if necessary, removing silt, sludge either manually or mechanical means using truck mounted hydraulic jet pressure or as required on ground , including all precautionary and safety measures, such as safety belts, lighting arrangements face mask etc and removing the same(silt, sludge &other waste material) in leak proof trucks covered with tarpaulin to outside of MD land all as per existing rules and regulations of civil authorities and flushing sewage line & manholes with adequate water as to make sewage line fully functional including reinstating the manhole cover to its original position complete all as specified and directed by Engr-in-Charge. (Note: Length of sewage lines including chambers, traps etc will be measured for payment. However cleaning of manholes shall be measured separately under appropriate item.)

Cleaning of septic tanks/soakage well of any size, capacity & depth by Mechanically using sewage tankers/ Truck mounted hydraulic jet pressure machine with flushing the sewage line with heavy duty sewage pumps sewage suction pump, by desluding, dewatering, taking out of all materials such as sludge/ soil waste/polythene /mud/silt/liquid/semi liquid /semi solid/solid or any unwanted items etc, including flushing with adequate water to make the fully functional, re-fixing opened access cover and removing all retrieved material outside the periphery of defence land. Note :- The measurement for the quantity of sludge removed will be arrived by multiplying the inner dimensions of septic tank to actual depth of sludge deposited by dipping the measuring rod. The depth shall be of that wet surface sludge on measuring rod for payment purpose. Note for serial item No. 09 & 10 : Contractor/supervisor take complaint from JE concerned all day and ensure to resolve all complaint within same day. Incase of non attending complaints sufficent time as decided by Engr-in-Charge but not more than 3 day ,recovery @ 1000 per day will be recovered from contractor.

Disconnecting existing tanks, setting side for repairing cleaning and removing all scale and dirt etc. from tanks and from mouths circulating pipes and hoisting in same position of capacity upto and including 500 ltr and endorsed the word "CLEANED ON WITH DATE with white paint including replacement of broken/unserviceable fitting such as Elbow Tee, socket, nipple of any size complete all as specified & directed

Disconnecting existing tanks, setting side for repairing cleaning and removing all scale and dirt etc. from tanks and from mouths circulating pipes and hoisting in same position of capacity exc 500 ltr but not exc 1000 ltr and endorsed the word "CLEANED ON WITH DATE with white paint including replacement of broken/unserviceable fitting such as Elbow Tee, socket, nipple of any size complete all as specified & directed

Dismantling water tanks (capacity of tank exc. 250 ltr but n. exc. 500 ltr) and removing from site ,S&F Rotational moulded polyethylene water storage tank (cylindrical vertical with closed top hoisted fixed in position all as specified in SSR part-I, capacity of tank 500 ltr incl inlet and outlet connection 20mm dia and 15mm dia GI pipes medium grade respectively 20mm GI pipe medium grade over flow pipe 15cm long and brass valve 20mm high pressure with polyethylene float and fly nuts complete all as specified and directed.

Dismantling water tanks (capacity of tank exc. 500 ltr but n. exc. 1000 ltr) and removing from site, S&F Rotational moulded polyethylene water storage tank (cylindrical vertical with closed top hoisted fixed in position all as specified in SSR part-I, capacity of tank 1000 ltr incl inlet and outlet connection 20mm dia and 15mm dia GI pipes medium grade respectively 20mm GI pipe medium grade over flow pipe 15cm long and brass valve 20mm high pressure with polyethylene float and fly nuts complete all as specified and directed.

Demolition of brick work stone/boulder masonry built in cement mortar including all quoins, arches, pillars etc complete all as specified and directed.

M&L for brick work in cement mortar 1:4 of old size sub class ‘B' bricks straight or curved on plan exceeding 6mtr mean radius complete all as specified and directed.

All as per description of item 16 here-in-above but except bricks complete all as specified and directed

M&L for brick work with sub class ‘B’ bricks straight or curved on plan to any radius in half brick thick walls built in cement mortar 1:4 complete all as specified and directed.

Demolition of cement concrete unreinforced of any description in any position not otherwise specifically provided for complete all as specified and directed

M&L for PCC (1:3:6) type C-2 using 40mm graded crushed stone aggregate as surface channels and drain etc including necessary form work complete all as specified and directed.

M&L for PCC 1:4:8 type D-2 (using 40mm broken graded stone aggregate) as in foundation, filling and mass concrete complete all as specified and directed.

M&L for plain cement concrete 1:2:4 type B-1 using 20 mm graded stone aggregate in copings, PCC block for hold fast, bed plates including weathering, slightly rounded or chamfered angles and throating as directed including necessary form work complete all as specified and directed

S&F Doctor fixit Pidifin 2k high performance 2 component flexible Acrylic polymer modify cement base water proofing coating in two coat 1mm thick dry film mixed in ratio 2:1 by weight or 1.5:1 by volume product of M/S Pidilite Industry Limited Makers of Fevicol adhesive brand over 10mm thick rendering in cement mortar 1:4 mixed with liquid water proofing admixture of approved brand complete all as specified & directed.

Demolition of cement concrete (reinforced) of any description and in any position not otherwise specifically provided for reinforcement cut as required to facilitate demolition, complete all as specified and directed

M&L for 1:5:10 type E2 cement concrete in foundation , filling and mass concrete complete all as specified and directed

M&L for Providing precast cement concrete (1:2:4) type B-1 using 20mm graded crushed stone aggregate as in cover slabs and similar articles including necessary moulds/formwork set in cement mortar (1:6) complete all as specified and directed.

M&L for Mild steel TMT bars 10mm dia and over cut to length bent to shape required including cranking, bending, binding with mild steel wire (annealed) not less than 0.9mm dia complete all as specified and directed.

M&L for Mild steel TMT bars 6mm to 8mm dia cut to length bent to shape required including cranking, bending, binding with mild steel wire (annealed) not less than 0.9mm dia complete all as specified and directed.

Taking down cement plaster on brick or concrete surfaces any description including raking out joints hacking for key scrubbing down with water complete all as specified and directed.

M&L for Rendering 10mm thick in cement mortar 1:6 on fair faces of brick work or concrete surfaces complete all as specified and directed.

M&L for Rendering 15mm thick plaster in cement mortar 1:4 on fair faces of brick work or concrete surfaces including scaffolding at any height complete all as specified and directed.

M&L for preparation of surface and applying two coat of oil bound distemper over one coat of asian primer as on walls surfaces complete all as specified and directed

M&L for preparation of New plastered surfaces of wall including scaffolding at any height, two coats of cement base paint over a coat of primer on newly plastered surfaces of wall including preparation of surfaces and curing after applying each coat complete all as specified and directed.

Taking up or down GI pipes 20mm bore and connection incl removal un-serviceable pipe, S&F GI tube 20mm bore medium grade galvanized with all fitting and fixed to short length complete all as specified and directed.

Taking up or down GI pipe 15mm bore and connections, including removal unserviceable pipe, S&F 15mm bore GI tubing medium grade galvanized ISI marked with all fittings complete on walls complete all as specified and directed.

Taking down chowkat or frame with shutter (without taking off shutter from the frame) not exceeding 1.50 Sqm each including taking out hold fast embedded in PCC complete all as specified and directed.

Refixing of door shutters in same opening of any description exc 1 Sqm but not exc 2 Sqm each complete all as specified and directed.

S&F Solid PVC door frame of size 50mmx47mm made out of 5mm prelam PVC sheet used instead of Plain colour PVC sheet and edges will be painted to match with prelam sheet reinforced with MS Square tube, supplying & fixing in opening as per specification and drawing. Note : Door frame shall be water proof, termite proof, elegant and should have excellent screw holding strength to fix hinges and hold doors properly for long life)

S&F Factory made Solid PVC Moulded Door Shutter with wood free EPS, 28 to 30mm thick (stiles) with 5 mm thick moulded prelam PVC sheet on the front face and 5 mm prelam PVC sheet on back face, supplying & fixing in the frame at site as per specification & drawing complete all as specified and directed.

S&F 150mm long aluminium, anodized barrel tower bolts of extruded section ISI marked complete all as specified and directed.

S&F 150mm extruded aluminium alloy handle fabricated anodized ISI marked complete all as specified and directed.

S&F 100mm long butt hinges medium weight cold rolled ISI marked aluminium complete all as specified and directed.

S&F in repairs vitreous china wash down water closet (pedestal pattern) white including fixing bolts and connecting to drain pipe, including seat cover plastic flat bottom and MS Chromium plated hinging device and connection to flush pipe, anti syphonic pipe etc complete all as specified and directed.

S&F in repair vitreous China squatting pan Orissa pattern size 580 x 440mm white with integral foot rest ( excluding flushing cistern and flush pipe), including connection to trap, and to flushing pipe, any syphonage pipe etc. and including 110mm bore PVC 'P' or 'S' trap complete incl making good to floor complete all as specified and directed.

S&F in repair vitreous china wash hand basin (flat back or angle back type) coloured of bowl size 550mmx400mm including waste and waste pipe PVC 32mm dia to be fixed over marble slabs or iron brackets complete all as specified and directed.

S&F in repair Vitreous china urinal half stall complete incl providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and incl 60mm long brass screws, pointing around urinal in back in cement; fixing automatic cistern with brackets, flush pipe, grating and union for discharge pipe, complete all as specified and directed.

S&F in repairs 10 liters PVC low level flushing cistern syphonic action type with inlet ball valve float and push type handle including bracket, PVC 32mm dia flush pipe with coupling and fixed complete all as specified and directed.

S&F PVC connection 15mm bore size with two nuts and washers of length 450mm complete all as specified and directed.

S&F grating round 125mm size of PTMT (minimum weight 50gms) as in repair, complete all as specified and directed.

Dismantling of wall tiling incl cement mortar bedding (but not backing)removing serviceable tiles to a store and rubbish off permises, M&L for providing glazed ceramic coloured wall tiles of size 450mmx350mmx7mm thick, set, jointed in colour cement to match laid over and including 10 mm thick rendering in cement mortar 1:4 complete all as specified and directed.

Dismantling of floor tiling incl cement mortar bedding (but not backing)removing serviceable tiles to a store and rubbish off premises including M&L Non skid ceramic colour tiles 7 to 8 mm thick ( sq/ rect) area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm, in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles laid over and including 15mm thick screed bed in cement mortar 1:6 complete all as specified and directed.

Dismantling of floor tiling incl cement mortar bedding (but not backing)removing serviceable tiles to a store and rubbish off premises including M&L Non skid ceramic colour tiles 7 to 8 mm thick ( sq/ rect) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm, in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles laid over and including 15mm thick screed bed in cement mortar 1:6 complete all as specified and directed.

Dismantling of floor tiling incl cement mortar bedding (but not backing)removing serviceable tiles to a store and rubbish off premises including M&L non skid Ceramic coloured tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0.18 Sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry with and pointed in coloured cement match the colour of tiles over 15mm thick screed bed in cement mortar 1:4 all as spd.

Dismantling of floor tiling incl cement mortar bedding (but not backing)removing serviceable tiles to a store and rubbish off premises including M&L vitrified ceramic tiles 10 mm thick ( sq/ rect) polished, area of each tile exceeding 0.18 Sqm but not exceeding 0.38 Sqm, in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles laid over and including 15mm thick screed bed in cement mortar 1:6 complete all as specified and directed.

S&F in repair 32mm bore corrugated PVC waste pipe complete all as specified and directed.

S&F in replacement 75mm bore PVC floor trap with grating including jointing to waste pipe in cement concrete type B-1, 1:2:4, complete all as specified and directed.

Dismantling/taking down of cast iron or unreinforced concrete or PVC soil waste and drain pipe 75mm or 100mm dia with all fittings complete all as specified and directed.

S&F, 110mm bore, PVC rainwater (SWR) drainage pipes single socket, in any length with rubber ring joints as in repair, fixed to walls with sufficient number of Iron stack clamp complete all as specified and directed.

S&F for 110mm bore pipes, PVC (SWR) bends any radius fitting of PVC (SWR) pipes as in repair complete all as specified and directed.

S&F of 75mm PVC (SWR) drain pipes 75 mm bore single socketed in any length with rubber ring joint fixed to walls complete all as specified and as directed.

S&F for 75mm bore pipes, PVC (SWR) bends any radius fitting for PVC (SWR) pipes as in repair complete all as specified and directed.

S&F in repair bib taps, standard of PTMT any colour high pressure screwed for iron pipe of 15mm bore complete all as specified and directed.

S&F in repair stop valve, standard of PTMT any colour high pressure screwed for iron pipe of 15mm bore complete all as specified and directed.

S&F in repair angle stop valve, standard of PTMT any colour high pressure screwed for iron pipe of 15mm bore complete all as specified and directed.

S&F in repair pillar tap of PTMT any colour screwed for iron pipe 15mm dia complete all as specified and directed.

S&F in repair sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm complete all as specified and directed.

S&F in repair sinks made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm complete all as specified and directed.

M&L cutting chases, pinning in brick work for concealed water tubing and making good to facings where required and pointed in cement mortar 1:3 cutting not exceeding 10cm girth complete all as specified and directed.

S&F in repair 20mm PTMT ball valve high pressure with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed complete all as specified and directed.

Preparation of new steel surfaces of any description not otherwise described, over 10 cm width or girth and providing two coats of synthetic enamel paint over a coat of red oxide complete all as specified and directed.

Supply & fixing in repair of CP health faucet with 1.00mtr flexible tube &hook fixed with and incl CP screws complete all as specified and directed.

Demolition of stone slabs, paver blocks and tiles of any description or thickness in floors/apron laid dry complete all as specified and directed.

S&F machine pressed precast concrete interlocking paver blocks with grey cement and no pigment, any shape and size conforming to IS 15658:2006 of 60mm thickness M35 grade complete all as specified and directed.

M&L for Sand filling under floors or in foundations including watering and consolidation complete all as specified and directed.

Demolition of cement Concrete(unreinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level ) complete all as specified and directed

M&L for 75mm thick PCC, type C-1, 1:3:6, ( using 20mm graded crushed stone aggregate) as in plinth protection finish the surface complete all as specified and directed.

M&L for Chequered cement coloured concrete tiles 300mm x 300 mm x 25 mm thick table vibrated chemical coated set and jointed, pointed in neat cement slurry with grey cement and pigment as in floor, Screed bed or bedding layer of 20 mm thick CM (1:6) as in floor, complete all as specified and directed.

S&F in repair bib taps, long body fancy type, chromium plated, cast copper alloy ISI marked with crutch or butter fly handle high pressure screwed down screwed for iron pipe of 15mm bore complete all as specified & directed.

S&F in repairs 15mm bore Angle valve fancy type chromium plated ISI marked with crutch or butter fly handle high pressure screwed both ends for iron pipe or for union and fixed complete all as specified and directed.

Supplied and fixed in repair stop valves (ISI marked), 15mm dia, cast copper alloy, chromium plated fancy type with long shank and cup(concealed type) screwed down, high pressure with crutch or butter fly handle, screwed both ends for iron pipes or for unions and fixed in pipe complete all as specified and directed.

S&F in repairs 15mm bore stop valve chromium plated fancy type screwed down high pressure with crutch or butterfly handle screwed both ends for 15mm bore of pipe complete all as specified and directed.

S&F in repair pillar tap chromium plated fancy type with capstan heads screwed down high pressure with or without lettered hot or cold with long screwed, shanked and fly nuts screwed for iron pipe 15mm dia complete all as specified and directed.

S&F in repairs chromium plated shower rose 75mm size with or without swivel joints, including fixing to steel pipe or union complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description complete all as specified and directed.

M&L for mild steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS-1161-1979 grade St-240 complete all as specified and directed.

M&L steel work in plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) Forming holes with riveted, bolted, or welded attachments complete all as specified and directed.

Excavation in post holes not exceeding 0.50cum getting out in Hard/dense soil, returning, filling in layers not exceeding 50 mtr and making good surfaces complete all as specified and directed.

Dismantling of Asbestos cement (corrugated, semi corrugated, etc.) sheets in roof coverings

S&F Prepainted galvalume aluminum zinc coated GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength 550 Mpa as in roof covering/cladding to walls, fixed with self taping screws complete all as specified and directed.

S&F pre painted galvalume aluminum zinc coated GI based plain steel sheeting 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to walls, fixed with self taping screws complete all as specified and directed.

M&L for reinforced concrete pipes, 450 mm bore, class NP-3, laid and jointed with collars complete all as specified and directed.

M&L for cement concrete 1:3:6 type C-2 using 40 mm graded coarse aggregate in bed to drain pipes including packing under and completely surrounding against the sides of pipes after they are laid and tested of 450 mm bore pipes including forming cradles complete all as specified and directed.

M&L for two coats of white wash on old/new plastered surface, as in wall including preparation of surfaces complete all as specified and directed.

M&L for 100mm thick plain cement concrete 1:2:4 type B-2 (using 40mm crushed stone agg) as in floors ,ramps ,hard standing or as in similar work finished even and smooth without using extra cement including form work where required complete all as specified and directed.

M&L for 50mm thick PCC, type C-1, 1:3:6, ( using 20mm graded crushed stone aggregate) as in plinth protection finishing the surface even and smooth without using extra cement complete all as specified and directed.

M&L for Providing precast cement concrete 1:2:4 type B-0 (using 12.5mm graded crushed stone aggregates) louvers and jallies, 40mm thick (measured solid), including all mouldings but excluding frame, set in CM 1:4 complete all as specified and directed.

M & L for Providing precast cement concrete Type B-1 1:2:4 in window or door ,cills, lintels, bressumers , steps, quoin block (for use with masonry) string courses, copings, kneelers, apex stones, pier caps, columns, posts, boundary pillars, bed plates, pikntle block, anchorage blocks, bonders (for stone walling), corbels, brackets etc (of any section indicated) with plain fair faces, including chamfers weathering throating etc and setting in mortar complete with joints to match complete all as specified and directed.

Dismantling RCC posts and struts any section including taking out embedded portion in natural ground and making good disturbed surface.

S&F for Mild steel posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe 290 Gde-E-165 complete all as specified & directed.

S & F in repair Galvanised, (hot dip) 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails strain ing bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. complete all as specified and directed (each line wire to be measured)

Preparation of new steel surfaces of any description not otherwise described, over 10 cm width or girth and providing two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

Supply and fixing Chain link MS galvanised fencing of wire mesh size 50 mm x 50 (Nominal pitch of wires), diameter of wire 3.8 mm complete all as specified and directed.

Fixing only chain link fencing incl line wires any mesh, size and type to any type of standards, rails, straining bolts, etc incl provision of binding wire complete all as specified and directed.

S&F MS round bar 10 mm dia as in strands for holding chain link fencing incl hooking etc complete all as specified and directed.

S&F Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, n exc 5cm long, 5 to 10 mm diameter of shank, complete all as specified and directed.

M&L for Concertina coil securing or tying incl provision of MS wire stapples or steel pins etc complete all as specified and directed.

Restraining rescuring of incl making good staples the old galvanised steel barbed wire any dia incl securing or tying at crossings complete all as specified and directed.

Dismantling timber scantling inc old wooden trusses , purlins, rafter or mild steel work of any description complete all as specified and directed.

M&L for Non abrasive paving (rectified endura) cement concrete coloured tiles 300x300mmx10mm thick set jointed and pointed in neat cement slurry mixed with pigment laid over 15mm thick screed bed in cement mortar 1:4 including demolition/dismantling old surface/tiles complete all as specified and directed.

Note: (i) In case the tenderer quotes different rates for similar item then lowest rate shall only be applicable for payment and contractor shall not have any claim on this account. (ii) The Schedule of Credit amount shall be deducted from the total of this schedule (BoQ) to arrive at Contract Sum.

VAISHNAVI BUILDERS (BID ID -3084011)

jagdambe traders (BID ID -3084081)

M/S BHAGYARAJ BUILDER (BID ID -3085555)

Jay Ann Construction Company (BID ID -3080552)

Walia trading co (BID ID -3094371)