WATER SUPPLY SCHEME GHANAOUR KALAN OF BLOCK SHERPUR DISTRICT SANGRUR PRWSSIP Component 2ai

Amount

Component -1

Repair of Pump Chamber

White washing scraping inside of Pump Chamber

Scraping of snowcem robbiacem etc.

White washing 2 coats inside of Pump Chamber

Finsing Wall with exiterior decorative cement based paint such as snowcem robbiacem etc. on new work in two coats to give even shade.

Applying Pink Primer or-aluminium priming coat including preparation of surface With special quality pain

Scraping of plastering of Pump Chamber (as per CSR item no. 8.31 (c))

Plastering 1:4, 12.5mm thick on Pump Chamber (as per CSR item no. 15.9)

Painting two coats excluding priming coat with ready mixed paint in all shades on old wood work With special quality paint Qty. as per item No. 5

Supplying & fixing glass panes including special metal sash putty of approved make.

Repair of OHSR

Repair of Expansion Joint. Size 80 mm i/d

Repair of Expansion Joint. Size 100 mm i/d

Painting of OHSR pipes including cost of labour & material complete in all respects.

Painting of OHSR stair case railing and pickets including cost of labour & material complete in all respects.

P/F OHSR Jali

Construction of plinth protection around OHSR with masonry toe wall & inside earth filling with lead 5 kms. complete in all respect as per drawing D-9 & Analysis of Rates A-10-1 to A-10-6 complete in all respects.

OHSR-50000 ltr Capacity outer dia of toe wall = 6.85 m

Repair of Water Works

Providing & fixing G.I. Barbed wire 3 ply fencing around the head works site in three rows complete in all respects including cost of winding wire & aluminum painting complete in all respects

Providing & fixing angle iron pickets with angle 40mm x40mm x 6mm including cost of concrete block & painting complete in all respects as per standard Drawing D-8 & (as per Analysis A-6).

Construction of masonry gate pillar including cost of MS Steel Gate size 1.22mtr x 1.37 mtr as per standard Drawing with including D-4 & Analysis A-6 complete in all respects

Providing & fixing D.Hook complete with MS Bolts size 300mm x 18mm as per standard Drawing D-7 & Analysis A-7

Construction of Cement Concrete, Foot Path with masonry toe wall & earth filling inside water works as per standard Drawing D-10

Construction of brick masonry corner pillar including cost of cement pointing including cost of material complete in all respects as per standard Drawing D-3 & Analysis A-5.

Providing, installing, testing & commissioning one no. Electrically actuated, diaphragm operated, Metering system, chemical dosing Chlorinator, suitable for delivering 0.5 to 0.6 litres of bleching powder solution/ sodium hypo solution per hour under maximum delivering pressure upto 7 kgcm^2 and suction lift not less than 1.5m as per DWSS standard Specification.

Automated water controller switch to start or stop the pump based on water reservoir level.

Provision for making new connection with exit pipe line as per analysis A-20

Thrust bearing through out the pully/ road or any other obstacle at the depth of 1 mtr. to pass pipe

Component -2

Providing proposed water connection on existing pipe line to house hold up to wall with providing, laying jointing, testing G.I pipe lines 15mm i/d=2.50 mtr (as per CSR 28.36 (a)) & MDPE pipe 15mm i/d = 2 mtr including cost of specials such as tees, bends, sockets, elbow etc. cutting, threading, and testing in trenches in the ground and ISI marked 15mm i/d GM ferrule as per IS: 2692 and 3'' i/d clamp with c.i. bib cock 15mm i/d as per IS:210 with stainless steel spindle of approvel make as per CSR 30.65 (b) complete.

Component -3

Providing, Laying, fixing & jointing of PVC Pipes as per ISI-4985 (ISI marked with the prior approval of Engineer-in-charge) along the Trenches and laying the same in Trenches to correct alignment and gradients, cutting, jointing and testing including excavation & back filling complete as per specifications for more than 3 mtr street width included excavation.

PVC pipe 63mm o/d 6Kg/sqcm

Providing & fixing C.I/D.I Flanged end, stem of SS (AIS 1410) and Bronze (gunmetal) working parts Sluice Valves ISI marked 14846-2000, including jointing, testing & cost of Nut, Bolt & insertion sheet, all carriage complete (with the approval of Engineer - in - charge)

Construction of masonry sluice valve chamber excluding Sluice valve cover as per standard design & drawings of public health department 3No. With each of Size 0.6m x 0.6m

Dismantling brick or flagged stone flooring without concrete base and relaying of dry brick on edge paving with a dismantled bricks including sand grouting.

PVC pipe 63 mm o/d

Providing proposed water connection to house hold up to wall with providing, laying jointing, testing G.I pipe lines 15mm i/d=2.50 mtr (as per CSR 28.36 (a)) & MDPE pipe 15mm i/d = 2 mtr including cost of specials such as tees, bends, sockets, elbow etc. cutting, threading, and testing in trenches in the ground and ISI marked 15mm i/d GM ferrule as per IS: 2692 and 3'' i/d clamp with c.i. bib cock 15mm i/d as per IS:210 with stainless steel spindle of approvel make as per CSR 30.65 (b) complete.

Painting on Board both sides including priming coat , printing & Map as per Water Supply & Sanitaton standard

Cost of Component-4 (Operation and maintenance)

Provision for sodium chloride for disinfection of water Complete in all respect.

M/S Rakesh Kumar Govt. Contractor Dhuri