CA NO CWE/CHD-39/2021-22 MAINT AND MISC CIVIL REPAIR WORKS AND PERIODICAL SERVICES TO CERTAIN OTM AND MD ACCN AT K AREA ZIRAKPUR UNDER GE CHANDIGARH

Amount

Taking down chowkats or frames with shutter (Without taking off shutter from the frame) exc 1.50Sqm but n exc 4.00 Sqm each complete all as specified and directed.

Taking down chowkats or frames with shutter (Without taking of shutter from the frame) n. exc 1.50 Sqm each complete all as specified and directed.

Taking down Shutters of any description exc 1 sq. m and n exc 2 sqm each complete all as specified and directed.

Taking down shutter of any description exc 1 sq.m but n exc 2.00 sq.m and refixing in same opening after minor adujusting complete all as specified and directed

S & F Pressed steel frames 125 x 60mm for doors with one or more rebates including necessary fixing lugs, hold fasts, hinges, lock strike plate, etc., complete all as specified and directed.

S & F Pressed steel frames 105 x 60mm for doors with one or more rebates including necessary fixing lugs, hold fasts, hinges, lock strike plate, etc., complete all as specified and directed.

PCC type C-0 (1:3:6) using 12.5 mm graded stone aggregates as filling of MS sheet chowkats, complete all as specified and directed.

S&F 35mm thick factory made 2nd class hard wood plain framed panneled shutter (two panel) with pannels of 9mm BWP commercial ply or 12mm veneered particle board with commercial veneered on both faces as specified & directed. detapering from 10mm to 5mm around the panel on one side fitted to chowkats. The size of rail and style as per IS 1003 (Part-1)Kiln seasoned and chemically pressure treated complete all as specified and directed.

M&L for 35mm thick 2nd class hardwood glazed and Skelton shutters of open rebated and prepared to receive glass,gauge etc.(with plain, chamfered or rounded, mitred and rebated sash bars,any numbers &divided into squares ) edges of framing plain, chamfered or rounded fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats complete all as specified and directed.

M & L 30mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type of both side complete all as specified and directed.

M&L for framed work as in doors or gates of angle of any section with gusset plates, rails, braces etc. conforming to Fe 410-WGde E-150 quality 'A' complete drilled for fixing of steel sheeting or other covering. Doors, etc to be prepared for hanging or sliding with and incl either hooks and hinges or steel hanging door fittngs (exclussive of steel sheeting or other covering, running rails and guides) and hanging, also fastening and fixing complete all as specified and directed.

S & F Galvanised mild steel wire cloth 0.63mm nominal dia of wire and average width of aperture 1.4mm and fixed stainless steel wire staples complete all as specified and directed.

S & F in repair 18-19mm particle board one side prelaminated Particle board and other side balancing white/any colour lamination, with and including 5 to 10mm thick beading, exterior grade, medium density, flat pressed single layer type or three layer type with BWR type adhesive, fixed with screws to timber frame work, in cup board shutters/ shelves and kitchen cabinets complete all as specified and directed.

S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawings complete all as specified and directed.

S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width struck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of lain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification complete all as specified and directed.

S&F in repair 300mm long ordinary rat tail rod pattern springs including roller and roller plate including fixed to stone/concrete/ steel chowkhat with flat iron 40x3mm size 75 cm long with necessary bolts/welding where required etc complete all as specified and directed.

S&F 150mm Aluminium handles, cast type, anodised complete all as specified and directed.

S&F 100 mm Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type C-21 complete all as specified and directed.

S&F 140 mm long Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified and directed.

S&F 200mm Aluminium anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed.

S&F 100 mm Hasp and staple, safety type, aluminium anodised hinge pin including bolt to hinge plate and fixed with screws complete all as specified and directed.

S&F 250 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed.

S&F double action floor spring hydraulically regulated made of min 1.25 thick aluminum alloy sheet foundation box main body with stainless steel cover, governing pivot made of brass other part made of mild steel heavy duty (ISI Marked) and fixed to shutter as in repair complete all as specified and directed.

Material and Labour for Box type steel window/ventilator made of ERW tube P- section of size 60 mm x 25 mm single rebated outer frame, comprises glazed Skelton of ERW tube P-Section size 50mm x 20mm with one/two Nos open able leaf consisting of two Nos Sash bar of T-section 20 x 3 mm welded to frame with one No vertical mullion of ERW box type T Section of size 60mm x 25mm and FI 2mm thick welded/screwed to frame for fixing of glass/wire mesh including fittings and fixture like as Handle, Tower Bolt, Stopper, Cleat, Pintal hinges, holdfast etc complete including cutting holes, making good dismantled portion in PCC 1:2:4 type B-1, all as specified and directed. (a) Hold fasts 150 mm long of 12 mm x 3 mm MS flat - 04 Nos per window (b) Handle of Z section 20 mm x 25 mm , 100 mm long - 01 No per leaf (d) Z Section stopper 20 mm x 25 mm , 100 mm long - 01 Nos per leaf. (e) Cleat 55 mm long of hollow square 15 mm x 12 mm - 02 Nos per leaf (f) MS pintol hinges size 75 mm x 12 mm -02 Nos per leaf Note : MS guard bars, sheets glass wire mesh and painting shall be measured and paid separately

All as per item No 24 here-in-before but without glazing bar complete all as specified and directed.

Hacking out old broken glass area n exc 1.5 sqm (any thickness,size,quality or description) from wooden frames or metal frame ,glazed with putty or fixed with beads incl punching or drilling out old glazing pins/spring clips complete all as specified and directed.

S&F 3mm thick sheet glass ordinary quality and fixed with oil putty or wooden beads having area not exc, 0.50sqm in each pane complete all as specified and directed.

S&F 4mm thick figured glass, pin head type and glazing with oil putty in squares in exc 0.5 sqm in each pane complete all as specified and directed.

M&L for preparing new wood or wood based surfaces over 10cm width or girth and applying two coats of synthetic enamel paint over and including a coat of pink primer complete all as specified and directed by Engr-in-Charge.

M&L for preparing new untreated steel or iron surfaces over 10cm width or girth and applying two coats of synthetic enamel paint over a shop coat of primer, all as specified and directed by Engr-in-Charge.

M&L for preparing new untreated steel or iron surfaces over 10cm width or girth and applying two coats of synthetic enamel paint over and including a coat of red oxide.

S&F in repairs Harrison rails of 25mm dia mild steel, chromium plated with fixing brackets, stops, rollers etc complete all as specified and directed.

S&F Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165 complete all as specified and directed.

M&L for aluminium anodized frame work as in doors/ windows/ ventilators chowkhats using any suitable single groove approved section with one or more rebates confirming to IS-733 and IS-1285 and coating grade A-153 confirming to IS-1868 fixed with PVC rawl plug and screws or with fixing clips with expanansion hold fasteners including necessary jointing cleats,glazing clips,rubber packing,aluminium anoddized snap beading screws & fittings etc.Gap of junction at top,bottom and sides filled with PVC/Neoprene felt etc complete all as specified and directed .

M&L for aluminium anodized frame work for shutter doors, windows or ventilators,side hung type without sash bars by any suitable single groove section as approved with one or more rebates confirming to IS-733 and IS-1285 and coating grade A-153 confirming to IS-1868 fixed with alumuminium chowkhats with mortice lock ,alumuminium hings & screws including necessary jointing cleats,glazing clips,rubber packing, aluminium anoddized snap beading & rubber packing etc complete all as specified and directed . Note for item No.34 &35 . (i) Make of the Aluminium Sections shall be as specified in Appx 'B'. (ii) Aluminium section/size shall be as approved by GE. (iii) Aluminium section snap beading ,cleat angle shall be screwed with CP brass or GI screws as directed (iv) Aluminium sections shall be of non rusted and bright finish completely (internal & external side)(v) The cost of PVC/rubber gasket is to be included in the cost of item No.34 & 35.

S&F 5mm thick tinted glass complete all as specified and directed.

S&F in repair 12mm thick toughened glass for partition walls/doors with and including making holes for fixing fixtures etc complete all as specified and directed.

S&F stainless steel clamps with and including fastners suitable for toughened glass partition/doors complete all as specified. Make : Jindal ,TATA & SAIL.

S&F stainless steel pivot (75mm or any other size as required) with and including suitable fixing arrangement for toughened glass doors complete all as specified. Make : Jindal ,TATA & SAIL.

S&F stainless steel handles (300mm or any other size as required) with and including suitable fixing arrangement for toughened glass doors complete all as specified. Make : Jindal ,TATA & SAIL.

S&F stainless steel mortice lock vertical type (100mm or any other size as required) with and including suitable fixing arrangement for toughened glass doors complete all as specified. Make :Link/ Jindal /Harrison .

S&F stainless steel door stoper 150mm( or any other size as required) with rubber bottom suitable for fixing to toughened glass doors complete all as specified.Make :Link/ crown/Harrison .

S&F in repair door closer (Aluminium die cast body) hydraulically regulated ISI marked designation No. 2,universal type, suitable for door shutters of 701 to 850 mm in width and of weight between 36 to 60 kg and fixed complete all as specified and directed. Make: Everest, Sandhu & Doorset.

Dismantling wall and ceiling boards (fibre pulp, insulation, etc) or insulation boards/slabs/blankets any thickness including cover fillets complete all as specified and directed.

M&L for providing and fixing Gyp board panel laminated with texture vinyl coated paper tiles of size 595mmx595mmx12mm as in ceiling board over and including powder coated Gl frame work 605mmx605mm for false ceiling comprising of Gl perimeter Angle size 25x25x 0.70 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate Tee size 0.70 mm thick having flange of 25 mm and web of 38 mm , frame grid suspended from soffit of ceiling at upto 900mm centre to centre or adjustable as required at site with 4 mm Gl wire hangers fixed/tightened with ceiling with the help of nylon sleeve/rawal plugs complete all as specified and directed. Make as specified in Appx 'B'.

Dismantling Asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings complete all as specified and directed.

M&L for 6mm thick asbestos cement, corrugated or semi-corrugated sheets in roofs, walls etc, Fixed with L-type or J-type or cranked hook bolts complete all as specified and directed.

Dismantling of plain or corrugated steel sheeting, any gauge, thickness, including nainital or similar pattern roof covering complete all as specified and directed.

S & F 0.63mm galvanised, corrugated mild steel sheeting with two corrugations side lap fixed with coach screws and washers in roofs, walls etc with grade of zinc coating 275 complete all as specified and directed.

S&F pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screw complete all as specified and directed.

Ditto as item No 50 here-in-before but plain sheet as in Ridge complete all as specified and directed.

Demolition of PCC bed blocks concrete of any desription and in any position, not otherwise specifically provided for complete all as specified and directed.

S&F MS rolled sections as in roof trusses (framed), trussed,purlins, rails and fastenings and bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. similar work conforming to Fe-410-W(Gde-E-250) ,complete all as specified and directed.

S&F Mild steel bolts, purpose made, with hexagonal or square head one end and screwed the other, or screwed both ends; each screwed end to be fitted with washers and one hexagonal or square nut, exc 30cm long (S & F Diameter of neck Exc 12 n exc 20mm) complete all as specified and directed.

M&L for PCC 1:2:4 type B1 using 20mm graded stone aggregate in PCC bed blocks, complete all as specified and as directed

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) and rubbish off the premises complete all as specified and directed.

Roughening surfaces of old concrete floor by picking, weeping clean and washing down with water to remove dust, etc. complete all as specified and directed.

M&L Non Skid ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.18 Sqm but not exceeding 0.38 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, over and include 15 mm thick screed bed in CM 1:6 complete all as specified and directed.

All as per item No 58 here-in-before but in skirting set and jointed in neat cement slurry over and incl rendering/bedding layer of 10mm thick in CM (1:4), complete all as specified and directed.

M&L Non Skid ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm, in floor/skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, over and include 15 mm thick screed bed in CM 1:6 complete all as specified and directed.

M&L Non Skid ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm, in floor/skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, over and include 15 mm thick screed bed in CM 1:6 complete all as specified and directed.

M&L Glazed ceramic coloured, tiles 450x300x 7mm / 300x200x 7mm thick in vertical surfaces such as skirting,dados and risers to steps over and including 10mm thick in CM (1:4), The tiles shall be laid in pattern with two or more coloured tile, combinations all in any pattern and shade/colour as directed by Engr-in-charge, complete all as specified and directed.

M&L for stone facia tiles in walls 450x300x 7mm in vertical surfaces at any height such as skirting, dados and risers to steps over and including 10mm thick rendering in CM (1:4), combinations all in any pattern and shade/colour at a height upto 10mtr, complete all as specified and directed.

M&L for vitrified tiles 9-10mm thick in light shade (square/ rectangular) polished, area of each tiles exc 0.18 sqm, but not exceeding 0.38 sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match colour of tiles over and including screed bed or bedding layer of 15mm thick in CM (1:4), complete all as specified and directed .

Ditto as per item No 64 here-in-before but in vertical surfaces such as skirting,risers etc over and including 10 mm thick rendering in CM (1:3), complete all as specified and directed.

M&L for machine cut Kota stone slab flooring 18-20mm thick over 15mm thick cement screed base in CM 1:4 and jointed with grey cement slurry mixed with pigment to match the shade of the slab incl. rubbing and polishing complete all as specified and directed.

M&L for kota stone slab 18-20mm thick in riser of steps, skirting, dado and pillar laid over cement screed and jointed with neat cement slurry over 10mm thick rendering of cement sand mortar (1:4) and pointed with coloured cement to match with complete all as specified and as directed by Engineer-in-Charge.

S&F in repair 5mm thick coloured wood grain printed PVC sheet strips in wall panelling over and including PVC frame and overlap strips and corner angles complete inclusive of Solvent Cement and fixing at site as per manufacturer's instructions complete all as specified and directed.

S&F in repair 3mm thick PVC flooring sheets, laminated plain coloured, marbled mosaic or mottled finish, laid with approved rubber based adhesive in floors as per manufacturer's instructions complete all as specified and directed.

Demolition /dismantling stone slab and tiles of any description or thickness in floors, aprons complete all as specified and directed

M&L for Granite 18-20 mm thick (of any tpe) work (table rubbed and polished) in steps, jambs, pillars, window cills,cooking platforms and like incl rounding or bullnosing the exposed edges over and including 15 mm thick screed in CM 1:3, and pointing in white cement (1:2) using marble dust and admixture of pigment to match with shade of granite complete all as specified and directed.

Demolitioin of cement concrete in ground floors and pavings n.exc 15cms thickness (below or above GL) complete all as specified and directed.

M&L for Providing, 50 mm thick cement concrete type C1 1:3:6 (20mm stone graded aggregate) as in floor finishes/ plinth protection finished even and smooth w/o using extra cement complete all as specified and directed.

M&L Chequered cement concrete tiles 30cm x 30cm x 25mm thick with grey cement and pigment, over and including 15 mm thick screed in CM 1:6 set jointed and pointed in neat cement slurry in floors complete all as specified and directed.

Forming Contraction (Dummy) joints 65 mm deep x 10mm wide, filled with sealing compound Grade A complete all as specified and directed.

M&L for 38mm width, 3mm thick glass dividing strip inserted in position conform to design complete all as specified and directed.

S&F MS rolled sections Joist, channel, angle, or tee sections,fixed independently, without connecting plates, etc. (cut to ordinary lengths i.e. within 20mm of the length indicated) similar work conforming to Fe-410-W(Gde-E-250) quality 'A' , complete all as specified and directed .

S&F in repairs poly carbonate coloured sheets as approved, 6mm thick as in roofs as in dome shape, circular/semi circular/ arch type shape, openning of size exc. 9sqm and not exc 14 sqm on plan as per site requriement and upto height of 10 mtr including self tapping screws/ form work/ scafolding if required at site to complete the work including adequate size steel screws, washers, nuts, rubber strips/rubber beading, silicon etc to fill up existiing holes etc aluminium strips/flat etc as per manufacturer's instructions, including dismantling of old sheet complete all as specified and directed. Make of the sheet shall be as per Appx B. Note. The dome is to be fixed and tested for leakage and seepage if any and to be properly sealed with sealing compound. Cost of dome testing deemed to be included in the quoted rate.

S&F in repairs Steel rolling shutters with 1.25mm thick laths, with out ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer erected in position as indicated, including gear operated type with bevel gear box and crank handle complete all as specified and directed.

Demolition of Reinforced cement concrete of any description and in any position not otherwise specifically provided complete all as specified and as directed.

M&L for Reinforced cement concrete 1:2:4 type B0(12.5mm stone graded aggregate) as in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like including necessary formwork as required complete all as specified and directed.

M&L for Reinforced cement concrete (1:2:4) Type B1(using 20mm graded stone aggregate )as in facia/sunshade /Lintel/beams etc including necessary form work complete all as specified and directed.

Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

S & F in repair stainless steel sink, 1.00mm thick for kitchen overall size 495mm x 420mm with bowl size 410mm x330mm x 160mm including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets, waste coupling, PVC waste pipe, washers, connecting union etc complete all as specified and directed.

M&L in repairs brass chromium plated shower rose 125mm size with or without swivel joints with shower arm 15 mm size, 195mm long with bend of 45 degree with flange , including fixing to steel pipe or union complete all as specified and directed.

S&F in repairs Vitreous China wash basin white flat back of size 550x400mm with CP waste coupling & PVC waste pipe complete all as specified and directed by Engr-in-Charge.

S&F in repairs PVC waste pipes 32 /40 mm suitable for basins/ sink / urinals complete all as specified and directed.

S&F in repairs PTMT grating doom 125mm dia with or without hole. (min wt 40gms) complete all as specified and directed.

S & F in repair PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified and directed.

S&F in repairs Vitreous China Squatting pan, 'Orissa pattern, size 580x440 mm white with integral foot rests including PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float, hockey stick and handle including brackets, complete all as specified and directed.

S&F in repairs vitreous china wash down water closet pan (Pedestal pattern) P or S type white with seat cover white (exluding fixing bolts, flushing cistern and flush pipe complete all as specified and directed.

S&F in repairs PVC plastic water closet seat cover (white coloured) closed pattern with flat bottom, cover and mild steel chromium plated or aluminium hinges device for pedestal pan complete all as specified and as directed.

S&F in repair 110mm PVC(SWR)'' P''/''S'' Trap complete all as specified and directed.

S&F in repairs 10 ltr capacity PVC valveless syphonic action type flushing cistern low level, white with inlet ball, float and handle including brackets and flush pipe complete all as specified and directed.

S&F in repair Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for 15 mm bore iron pipe and fixed complete all as specified and directed.

S&F in repair 15mm bore of pipe bib taps CP brass,fancy type,long body, screwed down, screwed for iron pipe. complete all as specified and directed.

S&F in repair 15mm bore of pipe Angle cock chromium plated brass fancy type, screwed down , high pressure, screwed both ends for iron pipe complete all as specified and directed.

Taking down steel water tubing 15mm to 20 mm with all fittings from walls, ceiling and floors, complete all as specified and directed.

Cutting chases in Brick wall, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth complete all as specified and directed.

S&F 15mm bore GI tubes medium grade with all fittings & fixed complete to walls or ceilings or laid in floors, complete all as specified and directed.

All as per item 100 here-in-before, but 20mm bore of pipe complete all as specified and directed.

All as per item No 100 here-in-before but 40mm bore as in repair complete all as specified and directed.

S&F in repairs PVC 110mm dia (SWR) pipe single socketed, in any length with rubber ring joints laid in floor or trenches complete all as specified and directed.

S&F in repairs PVC 110mm dia (SWR) pipe single sockted, in any length with rubber ring joints, fixed to wall complete all as specified and directed.

S&F in repairs 110mm dia PVC (SWR) bends of any radius complete all as specified and directed.

Dismantling of cast iron pipes 75/100 mm fixed in any position complete all as specified and directed .

S & F cast iron 100mm bore waste or vent (sand cast) pipes as in any length with or w/o ears with cement joints fixed to wall and laid in floor in complete all as specified and directed.

All as above item No 107 here-in-before but except pipe 100mm bore complete all as specified and directed.

S & F cast iron 75mm bore waste or vent sand cast pipe as in any length with or w/o ears with cement joints fixed to wall and laid in floor in complete all as specified and directed .

All as item No 109 here-in-before above but except pipe 75mm bore complete all as specified and directed.

S & F in repairs cast iron 100mm bore sand cast single branch pieces (equal or un equal ) ordinary quality and inverted spigot socket type or with parallel branch with oval access door complete all as specified and directed .

S & F in repairs cast iron 75mm bore sand cast single branch pieces (equal or un equal ) ordinary quality and inverted spigot socket type or with parallel branch with oval access door complete all as specified and directed.

S & F in repairs cast iron 100mm bore sand cast bends (any radius) and straight connecting piece complete all as specified and directed .

All as above item No 113 here-in-before but 75mm bore complete all as specified and directed.

S & F in repairs cast iron floor trap 75mm with CP grating including jointing to waste pipe, fixed in cement concrete 1:2:4 type B-1, complete all as specified and directed .

All as per item No 115 here-in-before but 100mm dia complete all as specified and directed.

Dismantling water tanks Exc 250 & n.exc 500 ltr complete all as specified and directed.

Dismantling water tanks Exc 500 & n.exc 1000 ltr complete all as specified and directed.

S&F 1000 Ltr capacity Rotational moulded polyethylene water storage tanks triple layer (cylindrical vertical with closed top) hoisted and fixed in position complete all as specified and directed.

S&F 500 Ltr capacity Rotational moulded polyethylene water storage tanks triple layer (cylindrical vertical with closed top) hoisted and fixed in position complete all as specified and directed..

S&F PVC water storage tank covers for capacity 500-1000 Ltrs complete all as specified and directed.

S&F 300mm long ordinary rat tail rod patter MS Door spring complete all as specified and directed.

S&F in repair Aluminium Door closer hydraulic regulated , designation No-1, (ISI Marked) universal type , suitable for door shutter up to 700 mm in width and of weight not more than 35 kg complete all as specified and directed. Make : Everest, Sandhu & Doorset.

S&F in repairs Chromium plated brass Toilet paper holder complete all as specified and directed.

S&F in repairs Chromium plated brass Jet spray with tube 1.5 mtr long complete all as specified and directed.

S&F in repairs Chromium plated brass 2 in 1 health faucet with hook 1mtr tube complete all as specified and directed.

S&F in repairs 15 mm bore dia of pipe Gun metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed.

S&F in repairs 20 mm bore dia of pipe Gun metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed.

S&F in repairs 20mm bore dia of pipe Ball brass valves, high pressure,with polythene float and flynut comp, screwed for iron pipe or brass ferrule and fixed complete all as specified and directed.

S&F in repairs Brass CP mixer(centre holes) for mixing hot and cold water screwed down for iron pipe and fixed (15 mm bore dia of pipe) complete all as specified and directed.

S & F in repair vitreous China bowl urinal flat back, size of 465 x 355 x 265 mm white (minimum), with grating and union for discharge pipe (excluding flushing cistern, flush pipe and waste pipe) complete all as specified and directed.

S&F Urinal spreader of PTMT any colour for fixing with 15mm dia pipe. (Minimum weight 60 gms) complete all as specified and directed.

S&F glass corner shelf, one set comprises of three pieces of corner shelf fancy type (small to large) 250 x 250mm, 200 x 200mm, 150 x 150mm) with all fittings,complete all as specified and directed.

Demolition of brickwork or stone/boulder masonary, built in cement mortar including quoins arches, pillers etc, but excluding ashlar facings, dressed stone work and precast concrete article complete all as specified and directed.

M&L for Brickwork using old size bricks class designation 10 straight or curved on plan exc 6m mean radius built in cement mortar (1:6) complete all as specified and directed.

All as item No 137 here-in-before but except bricks complete all as specified and directed.

M&L for preparation of plastered or unplastered old decorated surfaces of walls by brooming or by steel wire brushing, scrapping down smoke soot,moulds, moss and efflorescent salts, treating oil and greasy spots and applying one coat of white wash complete all as specified and directed .

All as per item No. 139 here-in-before above but two coats of white wash on walls complete all as specified and directed .

All as per item No. 139 here-in-before but one coat of white wash on ceiling complete all as specified and directed.

M&L for one coat of cement base paint on old decorated plastered or unplastered surfaces of walls including preparation of surfaces by brooming or by steel wire brushing, scrapping down smoke soot,moulds, moss and efflorescent salts and treading oil and greasy spots complete all as specified.

M&L for two coats of cement base paint on old decorated plastered or unplastered surfaces of walls in any colour or patern approved by GE including preparation of surfaces by brooming or by steel wire brushing, scrapping down snow soot,moulds, moss and efflorescent salts and treading oil and greasy spots, complete all as specified and directed.

M&L for one coat of oil bound distemper on old decorated plastered or unplastered surfaces of walls including preparation of surfaces by brooming or by steel wire brushing, scrapping smoke, soot, moulds, moss and efflorescent salts and treating oil and greasy spots complete all as specified and directed.

All as per item No. 144 here-in-before above but on ceiling surface complete all as specified and directed.

M&L for complete removal of existing treatment, preparation of surfaces and applying two coats of oil bound distemper on walls over and including wall care putty 1-2 mm thick complete all as specified and directed.

M&L for one coat of synthetic enamel paint (Ist quality) surfaces of any description, not otherwise described over 10 cm width or girth incl preparation of surfaces on old wooden surfaces all as specified and directed.

M&L for one coat of synthetic enamel paint (Ist quality) steel surfaces of any description, not otherwise described over 10 cm width or girth incl preparation of surfaces on old Steel surfaces all as specified and directed.

M&L for one coat of synthetic enamel paint (Ist quality) on old concrete surfaces of any description, not otherwise described over 10 cm width or girth incl preparation of surfaces all as specified and directed.

M&L for one coat of exterior acrylic emulsion paint on old decorated plastered or unplastered surfaces of walls including preparation of surfaces by brooming or by steel wire brushing, scrapping down smoke soot,moulds, moss and efflorescent salts and treading oil and greasy spots complete all as specified and directed.

M&L for complete removal of existing treatment, preparation of surfaces and applying two coats of exterior acrylic emulsion paint on walls over and including 1-2mm thick exterior wall care putty complete all as specified and directed .

Taking down cement plaster on brick or concrete or stone wall surfaces including racking out joints, hacking for keys, scrubbing down with water etc complete all as specified and as directed.

M&L for 15mm thick cement plaster with cement sand mortar (1:4) on fair faces of brick or concrete surfaces finished even & fair without using extra cement complete all as specified and as directed.

M&L for 15mm thick cement plaster with cement sand mortar (1:6) on fair faces of brick or concrete surfaces finished even & smooth without using extra cement complete all as specified and as directed.

M&L for 10mm thick cement plaster with cement sand mortar (1:3) on Ceiling of concrete surfaces finished even & smooth without using extra cement complete all as specified and as directed.

S&F 12mm thick plain gypsum board flase ceiling with GI frame work including all necessary drilling, cutting to fix electrical fittings and wiring items complete all as specified and as directed with following:- (a) GI sheet channel 30 x 25 x 20mm of 24 guage fixed with rawl plug and screws 450mm centre alongwith perimeter of walls. (b) GI sheet channel made of shade 50 x 40 x 40 mm of 24 guage places @ 600mm centre to centre from perimeter of wall except along wall (in one span). (c) GI wheet intermediate runner of size 45 x 10 x 10mm of 24 guage fixed @ 1200 centre to centre leaving frame of one side wall (in other span). (d) GI sheet 25mm wide & 20mm guage suspenders fixed with steel fastners to roof, ceiling @ 1200mm centre to centre. (e) 12mm thick gypsum boards, filling joints with POP and fibre gypsum tape and finishing complete with two coats of plastic emulsion paint over one coat of primer on ceilling complete all as specified and directed

M&L for repairing the edges of concrete chajjas, facias, slabs, columns & the like by providing PCC (1:2:4) type B-0 including all necessary form work and/or provision of rendering 15 mm thick (average thickness) in cement mortar (1:3), after applying a coat of cement slurry @ 3 kg/ Sq. m of surface, finished even and fair, surface area not exceeding 450 mm wide, in patches including taking down swoolen/damaged plaster or concrete complete all as specified and directed.

M&L for three coats of white wash on walls including preparation of newly plastered surfaces on walls complete all as specified and directed.

M&L for preparation of newly plastered surfaces of walls and applying two coats of Oil Bound distemper over and incl 1-2 mm thick wall care putty complete all as specified and directed .

M&L for two coats cement base paint on newly plastered, undecorated surfaces of walls including preparation of new plastered surfaces complete all as specified and directed.

M&L for preparation of newly plastered surfaces of walls and applying two coats of exterior acrylic emulsion paint on walls over and incl 1-2mm thick exterior wall care putty complete all as specified and directed.

M&L for three coats of white wash on ceiling including preparation of newly plastered surfaces complete all as specified and directed.

M & L for Provision of plaster plate of size not exceeding 0.1 Sq. m area in cement mortar 1:4, 15 mm thick and engraved (10 mm) on it & painting black on white surface (in synthetic enamel paint) the wording comprising building No. at the location complete all as specified and directed.

M & L for Removal of vegitation growth from buildings at any location and injecting chemical GLYPHOSATE as per recommendation of the manufacturers, in dry climatic condition, of area not exceeding 1 Sq. m each, all as directed by Engineer In Charge.

M & L for Cutting of trees of any description, any size, in any situation / location i.e. walls, roofs, etc. from buildings including removal of roots and applying root killer chemical as approved as per manufacturer's instructions and making good disturbed surface in PCC 1:2:4 type B-0 (using 12.5 mm graded stone aggregate) finished in cement mortar 1:3 and finished the surface as per existing surface complete all as specified.

M&L for applying one coat of interior grade acrylic emulsion on old decorated surfaces of walls including preparation of surfaces complete all as specified and as directed.

M&L for 1-2 mm thick texture painting on walls in any colour/shade/ pattern by any authorised applicator complete as specified and as directed.

M&L for madrasidana plaster on exterior walls in two layers, under and incl layer 12mm cement plaster 1:4 (1 cement: 4 coarse sand ) furrowing the under layer with scratching tool, applying cement slurry on the under layer @ 3 Kg of cement per square metre, top layer 15mm cement plaster 1:1/2:2 (1 cement: 1/2 coarse sand : 2 stone chipping 10mm nominal size) in panels with groove all around as per approved pattern including scrubbing and washing, the top layer with brushes and water to expose the stone chippings complete all as specified and as directed.

M&L for applying two coats of interior grade acrylic emulsion over a coat of primer on newly plastered/or surfaces prepared by wallcare putty of walls complete all as specified and as directed.

B N FRIENDS AND CO