Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Tender Value
₹7.3 Cr
Closing Date
9 Apr 2024, 5:30 amClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Avionics Division, Hyderabad
Avionics Division, Hyderabad
FOR PROCUREMENT OF RM COMPONENTS KIT
6912
HAL/HYD/COMML/224/118/1
Works
Accessories Complex- Avionics Divn
₹0
Exempted
9 Apr 2024
30 Mar 2024
30 Mar 2024
9 Apr 2024
HAL CONDITIONS AS PER SUPPLIER REMARKS
1) Tender Due Date :
If RFQ floated through e-portal, quotation will be considered only if submitted through e-portal.
If RFQ floated through e-mail, quotation will be considered only if submitted through e-mail.
Tender due date for submission of quote is as mentioned in the E-Portal Tender (date/time).
The submission of quote to be done on or before due date at HINDUSTAN AERONAUTICS LIMITED, AVIONICS DIVISION,BALANAGAR,HAL POST, HYDERABAD-500042, AP-INDIA. Submission of tender shall be done through HAL e-portal / through e-mail ID: [email protected] and Fax No.+91-40-23878389. Quotation will be considered only if submitted through HAL e-portal in case Tender is floated through e-procurement portal / email in case Tender is floated through email.
2) Validity of the Quotation:
Price quoted should be net and unless otherwise specified should remain valid for our acceptance for a minimum of 120 days from the closing date of enquiry and the materials of offered should be perfectly kept under provisional reservation for this quotation.
3) Submission of Tender:
a) The bidder is required to submit bids directly to HAL either through post/courier/drop in sealed cover with clear marking of bidder details. The cover should be marked with tender no., due date and bidders postal address. Response received, without bearing the bidder address will not be
entertained. Bid submitted by bidder’s authorized dealer/ distributor/ channel partner should accompany with ink signed or scanned copy of ink signed authorization letter of the bidder to whom tender has been originally issued. In the absence of authorization letter, the bids submitted
shall be considered as unsolicited.
b) The bid submitted through e-mail will be accepted subject to the same being sent to the specified email ID indicated in the tender document if it is in the tender through email. However, unsigned copy of bid received through email/Manual offers will not be considered in Limited/Open tender.
c) Response to bid through e-Procurement portal/ GeM portal should be uploaded in the e-Portal/GeM portal respectively.
d) Submission of tender in two bid system in manual mode:
e) In response to tender in two bid system, the bidders are required to submit technical bid and commercial bid separately. Each bid will be put in separate sealed cover marked with tender No., due date and indicated as technical bid or commercial bid as the case may be. Both sealed
covers will be put in a single cover, which will again be sealed and superscribed with tender no. and due date.
f) The technical bid should also include EMD in original form and Integrity Pact (if applicable). Technical bid without EMD in original form will be rejected. In case of EMD sent by SWIFT/ Wire Transfer, Transaction Code should be indicated along with the technical bid. The technical bid
will be accepted only after confirmation of receipt of EMD in time.
g) Bid received with technical bid and commercial bid in open condition inside one envelope will be rejected.
h) Submitting only one bid with rates and technical details as a single bid will be rejected.
4) Late Tender :Late Tender:
a) Bid received after the due date and time specified in the tender shall be considered as late tender and will not be considered.
b) HAL will not be responsible for loss or delay in receipt of tender documents/ tender in transit.
c) HAL will not be responsible for inability of bidder to upload the tender documents in e-procurement.
d) HAL reserves the right to reject late or incomplete tender
5) Opening of Tender :
a) Tender shall be opened on very next working day of due date at 13.30 IST at HINDUSTAN AERONAUTICS LIMITED, AVIONICS DIVISION,BALANAGAR,HAL POST, HYDERABAD-500042, AP-INDIA. Bidders or their authorized reps. who are desirous to attend the tender opening may forward written confirmation with name of authorized person and designation prior to tender opening.
b. During tender opening only the important particulars like price, payment and delivery terms will be read out.
6) Tender Evaluation:
a. Bid received in different currency will be converted to Indian Rupees. The TT selling rate for foreign currency exchange rate for conversion will be adopted as per the
RBI guidelines in India as on date of tender opening.
b. The tender will be evaluated on line item basis
c. Bid with lowest price conforming to the specification will be considered for placement of order.
d. If the bidder considers that tendered quantity is small, the bidder may quote for Minimum Ordering Quantity (MoQ). Commercial evaluation in this case will be done on
MoQ x unit price, if MOQ offer beyond 20% of RFQ quantity.
e. If two or more bidders quote the same price, HAL reserves the right to seek revised offer from the same bidders and placing order on revised L-1 offer. If same situation
prevails then HAL reserve the right to place order on any of them.
f. If the lowest bidder has not offered full quantity, for the balance quantity HAL reserves the right to source from other bidders at L-1 price.
g. To have parallel source of supply the order may be spilt to 2 or 3 sources subject to other bidders agreeing for L-1 price. The distribution of quantity among the bidders will
be as per the proportion (to be decided by the tenderer) given below :
Qty. distribution among L-1 : L-2 in proportion x% : y% or
Qty. distribution among L-1 : L-2 : L-3 in proportion x% : y% : z%
h. Conditional discounts will not be considered in evaluation of tender.
i. In respect of two bid system, technical bid will be opened on the tender opening date. After technical evaluation, the Commercial bids of those bidders who are technically
acceptable will be opened.
7) Integrity Pact (applicable for Tender value > 5 Crores:
(i) Integrity Pact (IP) as per HAL format enclosed shall be duly ink signed by the bidder along with the witnesses. Failure to sign Integrity Pact as per HAL’s standard format may lead to rejection of offer. In case of submission of offer through e-portal, scanned copy of the signed Integrity Pact also need to be submitted along with your offer and in parallel, the hard copy of original ink singed IP should reach HAL by post. The submission of Integrity Pact without deviation is a mandatory requirement.
(ii) It is requested to forward the original ink signed Integrity Pact in duplicate (as per HAL format enclosed at Annexure ____) duly initialed on each page to the following Contact Person and Address:
Address of the Division/Dept. :________________________ Contact Person Name/Designation : ________________________ Tel No. : ________________________
(iii) In respect of IP and its monitoring authority i.e. the Independent External Monitor (IEM), who is appointed by HAL, in line with the communication received from Central Vigilance Commission (CVC). The present IEM/s is/are:
(iv) The bidder may approach the IEM nominated only for IP related issues. Any other specific clarifications/query/status with reference to tender and request for validity, extension of the tender etc., should be forwarded to concerned tender issuing HAL Officer.
(v) Both Omnibus IP and Standalone IP formats are enclosed with RFQ/RFP. In case if Bidder has already signed Omnibus IP with any other Divisions of HAL and validity of the same exists for this contract period, then Bidder may forward the copy of the same. If Omnibus IP is not signed, then Bidder may choose to execute either of the IP formats i.e. Omnibus IP or Standalone IP.
8) Eligible Goods & Services:
Country of Origin: Bidder’s country which shares a land border with India:
Any bidder from a country, which shares a land border with India will be eligible to bid in this tender only if the bidder is registered with the Competent Authority (i.e. the registration committee constituted by the Department for Promotion of Industry and Internal Trader (DPIIT). However, the bidders from those countries (even if sharing a land border with India) to which the Government of India has extended lines of credit or in which the Government of India is engaged in development projects are not required to register with Competent Authority and will be eligible to bid in this tender. Bidder from a country, which shares a land border with India, for the purpose of this Order means:-
i) An entity incorporated, established or registered in such a country; or
ii) A subsidiary of an entity incorporated, established or registered in such a country; or
iii) An entity substantially controlled through entities incorporated, established or registered in
such a country; or
iv) An entity whose beneficial owner is situated in such a country; or
v) An Indian (or other) agent of such an entity; or
vi) A natural person who is a citizen of such a country; or
vii) A consortium or joint venture where any member of the consortium or joint venture falls under
any of the above.
Unless otherwise stipulated in the Contract, country of origin of ‘Services’ and related ‘Goods’ under the contract shall have their origin in India or other countries and must conform to the declaration, made by the Supplier in its bid regarding but not limited to any restrictions on certain countries with land-borders with India. The successful bidder shall not be allowed to sub-contract works to any contractor from a country, which shares a land border with India unless such contractor is registered with the Competent Authority.
9) Non-conformities between Figures and Words:
In case of non-conformities/errors are observed in responsive tenders between the quoted prices in figures and in words. This situation normally does not arise in case of e-Procurement. This should be taken care
of in the manner indicated below:
i) If, in the price structure quoted for the required goods, there is discrepancy between the unit price and total price (which is obtained by multiplying the unit price by the quantity), the unit price shall prevail and the total price corrected accordingly;
ii) If there is an error in a total corresponding to the addition or subtraction of sub-totals, the sub-totals shall prevail and the total shall be corrected; and
iii) If there is a discrepancy between words and figures, the amount in words shall prevail.
Such a discrepancy in an offer will be conveyed to the bidder and if the bidder does not agree to HAL's observation, then the bid is liable to be rejected.
10) Supply of Samples:
Samples submitted for any reasons shall be supplied without charge and freight paid and without any obligation on the Purchaser as regards safe custody. All samples submitted must be clearly labeled with the bidder’s name and address and tender number. If the bidder submits the samples with his tender the same shall not govern the standard of supply except when it has been specifically stated in the Purchase Order that it is accepted instead of any sealed pattern. Should certified samples be lent to a bidder by HAL the bidder is responsible for the return in perfect order of all certified samples with the labels intact.
The Vendor will be held responsible for the stores being sufficiently and properly packed for tropical storage and for transport by rail, road, sea or air so as to ensure their being free from loss or injury on arrival at their destination. The packing and marking of packages shall be done by and at the expense of the vendor. Each package shall contain a Packing Note quoting Purchase Order number and date showing its contents in detail. Each shall be properly marked with Purchase Order No., Consignee’s name & address, package handling instructions etc. The package shall have adequate provision for handling during transit.
12) Receipt & Dispatch:
The Vendor is responsible for obtaining a clear receipt from the Transport Authorities specifying the goods dispatched. He will not book any consignment on a said to contain’ basis. If he does so, he does it on his own responsibility. HAL will take no responsibility for short deliveries or wrong supply of goods when the same are booked on said to contain’ basis. HAL shall pay for only such stores as are actually received by them in accordance with the contract.
a) The bidder is required to indicate prices against individual items. Prices quoted should be in the currency of the country of supply or any other convertible foreign currency (to be specified by HAL in line with RBI / FEMA rules).
b) HAL being manufacturers, bidders to indicate in the quotation manufacturers discount if any.
c) Bidders to confirm that : (As applicable)
i. The prices quoted are the lowest export price and is the same as they would normally quote to Govt. Department.
ii. The price is in terms of the appropriate clause of the License Agreement. (Where License Agreement is in vogue).
d) Price quoted should be net FOB / FCA, export packed / FAS Vessel with no extra charge whatsoever.
e) If, for special reasons, bidder prices are Ex-Works or F.O.B. plant, bidder must prepay inland transportation’s. Port dues and shipment charges up to F.O.B. vessel at port of shipment and claim this amount of actual along with the price of the goods through bank. Bidder’s quotation should indicate clearly the extent of such charges.
f) Tenderers should clearly mention whether the prices hold good when the full quantity of enquiry is not ordered but only a part of it. Unless otherwise mentioned, it would be assumed that the rates hold good even when lesser quantities than those enquired of are ordered. Any increase in prices at a later date for ordering lesser quantities will not be agreed to
g) Preference will be given to firm prices. But should quoted prices be subject to variation, bidder is requested to give the following information:
i. The portion of the contract price which will be subject to such variation
ii. A breakdown of this variable figure into i) labour ii) materials
iii. An escalation formula linked to indices with a Cap should be given and escalation in price established with supporting documents. Price variation may be considered only if it occurs within the contractual delivery period.
iv. A further break down of materials giving the main classes of material involved i.e. steel, nonferrous metal etc.
a) In respect of Foreign bidders, bidders has to bear all taxes, duties and levies payable in their country and HAL will bear all statutory levies, other than withholding tax and service tax, payable in India.
b) Withholding Tax
i) HAL would be deducting at source applicable Income Tax as per Government of India Rules applicable at the time of making payments in respect of services rendered in India. (Generally on the amounts towards services like training, technical assistance offered by the bidder and license fees). As per the Rules, Income tax has to be borne by the recipient of the Income and relevant certificate to this effect will be issued to the bidder on deduction of such amounts, if applicable.
ii) Bidder should bear the applicable withholding income tax in India. Tax would be deducted at source by HAL as per DTAA where the bidder could claim the benefit of double taxation in their country as per the bilateral agreement between the two countries. Certificate to this effect would be issued by HAL to enable the bidder to claim the benefit under DTAA.
iii) Bidder is required to indicate the PAN No. issued by Indian Income Tax Authorities.
a. The quotation must be in the unit in which the quantity is indicated in the enquiry. If it is otherwise, conversion data must be furnished.
b. HAL reserves the right to order quantity less than indicated in the enquiry /quoted for by bidder, at the prices quoted, without any reference to the bidder.
c. For the Raw materials (in forms of bar, sheet, wires etc.) Qty. tolerance 10% acceptable.
i. Deliveries quoted should be firm (or as per the schedule indicated).
ii. Please confirm whether the item/equipment quoted/ offered is of-the-shelf or to be manufactured specific-to-type. If the items/equipment is manufactured specific-to type,
bidder to quote firm delivery schedule taking into consideration of the period actually required based on the complexity of the equipment. In the event of an order, HAL reserve the right to claim towards liquidated damages on the undelivered part of the order. This clause will be strictly followed by HAL. Therefore your delivery schedule should be firm and definite.
iii. If installation and commissioning of the equipment is required to be done by bidder at HAL site, bidder to indicate the period required for the above job from the date of intimation of readiness of site at our premises.
iv. Bidder to note that the delivery schedule should be for:
i) Period required for the delivery/dispatch of equipment and
ii) Period required for installation and commissioning of the subject equipment after intimation from HAL about readiness of the site.
17) Quality and Workmanship:
1) Generally the stores shall be of the best quality and workmanship. Contractor shall comply with the contract in all respects be to the satisfaction of HAL. Where tenders are called for in accordance with ‘particulars’, the contractor’s tenders to supply in accordance with such `particulars’ shall be deemed to be an admission on his part that he has fully acquainted himself with the details thereof and no claim on his part which may arise on account of non-examination or insufficient examination of the ‘particulars’ will in any circumstances be considered. The contractor shall supply the stores in accordance with the ‘particulars’ unless any deviation is authorised as an exception expressly specified in the Purchase Order.
2) The Stores/Goods supplied shall conform to the standards, if mentioned in the Technical Specifications, or, where no applicable standard is mentioned, to the authoritative standards appropriate to the
Goods’ country of origin. Such standards shall be the latest issued by the concerned institution.
18) Inspection, Consequences of Rejection:
The goods on receipt in HAL will be subject to inspection and tests, if necessary and HAL inspector’s decision as regards acceptance/rejection of goods shall be final and binding between the parties.
If any stores are rejected, then HAL shall be at liberty to: a) Either:
i) Allow the contractor to re-submit stores in replacement of those rejected within a time specified by HAL, the contractor bearing the cost of freight in such replacement without being entitled to any extra payment, (or)
ii) Buy the quantity of stores rejected or other of a similar nature elsewhere at the risk and cost of the contractor without effecting the contractor's liability as regards the supply of any further consignments due under the contract, (or)
iii) Terminate the contract and recover from the contractor the loss HAL may thereby incur. The contractor shall not be entitled to any gain on the repurchase,
b) Any stores rejected by HAL’s Inspector must be removed by the contractor within 14 days from the date of receipt of intimation of rejection and at his own cost, failing which the contractor shall be liable to pay storage charges at 1% for each day of delay on the invoice value of the stores. If the stores are not removed within a month from the date of intimation of rejection, the stores will be liable, to be sold by HAL at the contractor’s risk and responsibility and the proceeds adjusted towards storage charges.
c) In case any payment is made against delivery and it is found that the supplied item is rejected during inspection/commissioning, contractor will be required to choose any one of the following options to collect the rejected item for replacement:
i) Refund the amount paid and collect the item for replacement.
ii) Submit a Bank Guarantee for the amount already paid and collect the item for replacement.
iii) Bring the replacement item to HAL and collect the rejected item.
19) Supply of Alternative Item:
In case bidder is quoting for an alternative part number it should be confirmed that the offered part is fully interchangeable with the required part. Applicable descriptive literature/ catalogue if any may please be enclosed by the bidder with offer
20) Shelf Life :
Where stores offered have a limited shelf-life, kindly indicate the life involved and confirm that in the event of an order from us, only newly manufactured stores with the maximum possible shelf-life at the time of dispatch will be offered for shipment. In respect of rubber items such as seals etc., having cure date, the item should not have been manufactured earlier than 6 months of dispatch.
21)Deliveries, Consequences of Breach:
The date of delivery stipulated in the Purchase Order shall be deemed to be the essence of the Contract, and delivery must be completed on or by the dates mentioned in the Purchase Order or the tender. Should the Vendor fail to deliver the stores or any consignment thereof within the period prescribed for such delivery, HAL shall be entitled at their option:
a. To recover from the Vendor as per liquidated damages, and not by way of penalty, a sum of 0.5% of the price of any stores which the contractor has failed to deliver as aforesaid, for each week or part thereof during which the delivery or such stores may be in arrears subject to a maximum of 10% of the price of the stores in default (or)
b. To purchase elsewhere, with or without notice to the Vendor on the account and at the risk of the Vendor, the stores not delivered or others of a similar description (where other exactly complying with the particulars are not available), HAL’s decision in this respect will be final (or)
c. To terminate the contract in the event of action being taken under Para – (a) & (b) above, the Vendor shall be liable for any loss which HAL may sustain on the account, but the Vendor shall not be entitled to any gain on repurchases made against default.
22) Repeat Order:
HAL reserves the right to place repeat Order up to 100% of the value of the original order (statutory levies shall be paid as applicable) within 12 months from the date of completion of the original order. The prices, terms and conditions of the repeat order shall be the same as that of the original. However, placement of repeat order is not guaranteed and this will be at the sole discretion of HAL.
Repeat Order can be placed by any Division/Office of HAL including the Division/Office which has originally placed the purchase order.
Warranty shall be for a period of twelve calendar months, after the goods have been taken over by HAL, the contractor shall be responsible for any defects that may develop due to faulty materials, design or workmanship and shall remedy such defects at his own cost when called upon to do so by HAL who shall state in writing in what respect the portion is faulty. If it becomes necessary for the contractor to replace or renew any defective portion of the goods, the contractor shall make such replacement or renewal without any extra cost to HAL. During warranty minimum uptime of 95% shall be ensured failing which warranty period shall deem to be proportionately extended. During warranty period equipment shall be replaced/repaired free of cost including any to & fro freight/insurance involved. Supplier shall attend to warranty calls within 48 hours’ notice.
24) POST-WARRANTY SERVICE
Arrangements for after sales service and maintenance (authorized service Centre) in India on site during warranty & post warranty period should be clearly indicated providing with name, address, phone, fax, contact person, infrastructure along with spare parts inventory held by your Authorized Technical Service Center. The vendor to indicate the validity period of authorization for the technical service center.
25) Liquidated Damages :
In the event of an order, we reserve the right to collect a sum of 0.5% per week of delay or part thereof, subject to a maximum of 10% as our claim-towards liquidated damages on the undelivered part of the order.
26) Penalties for Misdemeanors:
Without prejudice to and in addition to the rights of the HAL to other remedies as per the Tender-documents or the contract, If the HAL concludes that a (prospective) bidder/ Supplier directly or through an agent has committed a misdemeanor in competing for the tender or in executing a contract, the HAL shall be entitled, and it shall be lawful on his part to take appropriate measures.
27) Exit Clause:
Exit criteria: The contract/order may be terminated under the following circumstances:
i) In the event of unsatisfactory performance by the Seller during the contract period, or any of the information provided by the Seller is found to be untrue, or Seller is found to have attempted to influence any person involved with the contract through unethical means, the contract shall be terminated with one month’s advance notice without any financial implication to Buyer.
Notwithstanding the foregoing, in cases where it is found that a Seller is engaged in unethical practices, they shall be barred from participating in the future contracts for a period of 3 years.
ii) If there is change in Buyer requirement, contract shall be terminated with 1 months advance notice. The liability of Buyer in this case will be agreed mutually. In the event of termination of contract by either party the Seller shall ensure the following:
a) IPR’s are transferred to Buyer to enable Buyer to proceed on the work with other Seller. Seller also will render all assistance till the other Seller fully take over the balance work. (If applicable)
b) Transfer title and deliver all or any part thereof of the supplies, materials, work-in-progress, finished Products, Tooling, drawings and data produced or acquired by Seller specifically for the Product being terminated.
c) Supply of products and its components / spares at least for a period of 3 years from the date of such termination.
iii) The Seller is declared bankrupt or becomes insolvent.
iv) The delivery of material is delayed due to causes of Force Majeure by more than (6 months).
v) Based on the decision of the Arbitration Tribunal.
28) Termination for Default of Seller or for other reasons:
HAL shall have the right to short close present Contract in part or in full by giving 1 month prior notice to the Supplier, in any of the following cases:-
a) The work is delayed or cancelled for causes attributable to force majeure.
b) The requirement is withdrawn by HAL’s Customer.
c) The Supplier is declared bankrupt or becomes insolvent.
d) It is noticed that the firm has utilized the services of any agent to get the resulting Order and paid any commission to such agent.
e) As per decision of the Arbitration Tribunal.
f) In case any part of the Order is subcontracted by the Supplier without prior permission of HAL.
g) If the performance of the Supplier is not found satisfactory during the execution of work.
In any of the above stated case, no claim of damage etc., by the Supplier will be allowed.
29) Insolvency:
If Supplier enters into liquidation, whether compulsory or voluntary (other than amalgamation or reconstruction with another party taking over all its rights as well as commitments) or becomes insolvent or
suffers a receiver of the whole or part of its asset to be appointed,
i) Shall forthwith notify the same to HAL and the HAL shall have the right without prejudice to his other rights or remedies to terminate the unexecuted part of this Contract.
ii) In such an event, HAL shall become entitled forthwith to get the refund within 30 days of all the advance payments received by Supplier and expenditure incurred by as a part of its obligations under this contract it has not fulfilled.
In such an event if applicable, Supplier is liable for return of any materials/items (including drawings, designs etc.) to HAL, which are held at his end as a part of the obligations under this contract
The successful bidder/Supplier shall defend, indemnify and hold HAL harmless from and against all actions, causes of action, liabilities, claims, suits, judgment, liens, awards, damages of any kind and nature whatsoever and expenses and costs of litigation to the extent such claims arise out of infringement of any IPR, patent, copyright, trademark or involve wrongful use of trade secret or confidential information or negligence attributable to the Supplier.
31) Appropriation:
Whenever under this contract any sum of money is recoverable from any payable by the contractor, HAL shall be entitled to recover such sum by appropriating in part or whole by deducting any sum then due or which at any time thereafter may become due to the contractor in this or any other contract entered by HAL as a whole its Divisions and Branch Offices etc., held by him alone or in partnership with others. Should this sum be not sufficient to cover the full amount recoverable, the contractor shall pay to HAL on demand the remaining balance due.
32) Risk purchases:
The Supplier will supply quality items as per approved sample and also the quantity intended by the concerned Division in full as per terms and conditions of respective orders. In case the Supplier fails to execute the order either in terms of quality or in quantity, HAL reserves the right to procure from elsewhere at the risk and cost of the Supplier and any extra expenditure incurred due to this purchase is payable by the Supplier.
33) Bribes and Gifts:
Any bribe, commission, gift or advantage given, promised or offered by or on behalf of the Vendor or his parties, agent or servant or any one on his or their behalf to any officer, servant, representative or agent of HAL or any person on his or their behalf in relation to the obtaining or to the execution of this or any other contract with HAL shall in addition to any criminal liability which the Vendor may incur, subject to the Vendor to the cancellation of this and all other contracts with HAL and also to payment of any loss or damage resulting from any such cancellation thereof. Any question or dispute as to the commission of any offence under the present clause shall be settled by HAL in such manner and on such evidence or information as
they may think fit and sufficient and their decision shall be final and conclusive.
34) Immunity to Government of India:
It is understood and agreed that the Government of India is not a party to this agreement and has no liabilities, obligations or rights hereunder. It is expressly understood and agreed that HAL is an independent legal entity with power and authority to enter into contracts solely in its own behalf under the applicable Laws of India and General Principles Contract Law. The vendor shall agree, acknowledge and understand that HAL is not an agent, representative or delegate of the Government of India. It is further understood and agreed that the Government of India is not and shall not be liable for any acts, omissions, commissions, breaches or other wrongs arising out of the contract. Accordingly, vendor expressly waives releases and foregoes any and all actions or claims against the Government of India arising out of this contract, not to sue the Government of India as to any manner, claim, and cause of action or thing whatsoever arising out of or under this agreement.
35) Agents/Agency Commission:
(Note: HAL has not appointed/authorized any person/agent to deal with the vendors in respect of the said contract. In case, if someone claims and interacts with the vendors it shall be duty of the vendors to bring such instances to the notice of HAL Management).
The Seller confirms and declares to the Buyer that the Seller is the original manufacturer or authorized distributor/stockiest of original manufacturer or Govt. Sponsored/ Designated Export Agencies (applicable in case of countries where domestic laws do not permit direct export by OEMs) of the stores referred to in this offer/contract/Purchase order and has not engaged any individual or firm, whether Indian or Foreign whatsoever, to intercede, facilitate or in any way to recommend to Buyer or any of its functionaries, whether officially or unofficially, to the award of the contract/purchase order to the Seller; nor has any amount been paid, promised or intended to be paid to any such individual or firm in respect of any such intercession, facilitation or recommendation. The Seller agrees that if it is established at any time to the satisfaction of the Buyer that the present declaration is in any way incorrect or if at a later stage it is discovered by the Buyer that the Seller has engaged any such individual/firm, and paid or intended to pay any amount, gift, reward, fees, commission or consideration to such person, party, firm or institution, whether before or after the signing of this contract/ purchase order, the Seller will be liable to refund that amount to the Buyer. The Seller will also be debarred from participating in any RFQ/ Tender for new projects/program with Buyer for a minimum period of five years. The Buyer will also have a right to consider cancellation of the Contract/Purchase order either wholly or in part, without any entitlement or compensation to the Seller who shall in such event be liable to refund all payments made by the Buyer in terms of the Contract/ Purchase order along with interest at the rate of 2% per annum above LIBOR (London Inter-Bank Offer Rate) (for foreign vendors) and Base Rate of SBI (State Bank of India) plus 2% (for Indian vendors). The Buyer will also have the right to recover any such amount from any contracts/ Purchase order concluded earlier with Buyer.
36) Make In India:
Considering the huge and continuous requirement, HAL suggests the successful bidder to explore the possibility of manufacturing of the offered items in India to promote Govt. of India’s Make in India Policy. At this stage, HAL proposes to buy the systems/ items directly from the bidder for the firm requirement indicated above. However, for anticipated/future requirement, HAL requests successful bidder to submit the roadmap/proposal for HAL’s review for manufacturing of the offered system/item in India by setting up manufacturing facility in India or through joint venture in India.
37) Fall Clause:
The price quoted shall be in no event exceed the lowest price at which you sell the supplies or offer to sell supplies of identical description for similar quantity/terms to any person(s)/ organization including the purchases by any department of the Govt. of India, the State Govt. or any statutory undertaking of the Govt. of India/ State Govt., as the case may be during the period till the completion of the performance of the order placed and during currency of the order.
If at any time during the said period, the contractor reduces the sales price, sells or offers to sell such supplies to any person/ organization including the purchaser or any department of Central Govt. or any Dept. of State Govt., or any statutory undertaking of the Central or State Govt., as the case may be at a price lower than the price chargeable under the contract, Seller shall forthwith notify such reduction/ sale or offer to sale to the HAL and the price payable under the contract for the supplies supplied after the date of coming into force of such reduction or sale or offer to sale shall stand correspondingly reduced.
38) Terms of Payment:
i) In accordance with our standard practice, payment against any order materializing out of your offer, will be against presentation of documents through the State Bank of
India, HAL campus, Balanagar, Hyderabad, India.
ii) As a matter of policy HAL arrange payments to the extent of 100%, through bank transfer within 30 days of delivery and acceptance of goods. In case Bank Guarantee/Performance Bank Guarantee is mentioned in PO, portion of payment agreed against BG/PBG will be paid after fulfillment of all contractual obligations and on submission of BG/PBG.
iii) If under unavoidable situations payment has to be made through Letter of Credit, the same can be established for 100% of the order value before three months from the date of dispatch. All bank charges are to be borne by the vendor.
39) Payment through TReDS Portal:
HAL is registered on TReDS platform (Trade Receivable Discounting Systems), as being promoted by GOI directives. It is suggested that all the MSME Vendors to take note of the same and consider for registration on any TReDS platform and avail the platform services which is being made available as per Government initiative.
40) Firm Prices:
The contract prices will be firm and fixed as per contract terms till execution of contract and exclude subsequent claims or price increases of any kind.
41) Payment For Stores/Supplies:
Unless otherwise agreed to between the parties, HAL will effect payment for the delivery of the stores by Electronic Bank Transfer (ECE/RTGS) to the supplier’s bank account as notified to HAL on submission of bills in triplicate. Payment for the stores on each delivery will be made to the contractor after goods are received and passed by inspection. Normally 30 days will be allowed for inspection after receipt of goods
42) Statutory Variation Clause:
Unless otherwise stated in the contract, statutory increase in applicable GST rate only during the original delivery period shall be to Procuring Entity’s/Buyer account. Any increase in the rates of GST beyond the original completion date during the extended delivery period shall be borne by the Supplier. The benefit of any reduction in GST rate must be passed on to the Procuring Entity/Buyer during the original and extended delivery period. However, GST rate amendments shall be considered for quoted HSN code only, against documentary evidence, provided such an increase of GST rates takes place after the last date of bid submission.
43) Confidentiality:
The Supplier shall hold confidential technical data and information supplied by the Purchaser or on behalf of the Purchaser and shall not reproduce any such technical data or information or divulge the same to any third party without the prior written consent of the Purchaser. The Purchaser shall hold confidential technical data and information supplied by the Supplier or on behalf of the Supplier and shall not reproduce any such technical data or information or divulge the same to any third party without prior written consent of the Supplier except as far as may be necessary for either party to carry out its obligations under this Contract.
For the purpose of this Tender/Contract/Agreement, the Bidder/Contractor/ Supplier shall not store, copy or disclose HAL’s data and information whether in written, machine readable or other tangible form or disclosed orally, that is of value to HAL. Also, Bidder/Contractor/Supplier agrees to use HAL’s data only for the purpose under this Tender/Contract/Agreement, restrict disclosure to any other person or entity or third party and shall safeguard the provided data including from cyber security risks etc. Bidder/Contractor/Supplier should promptly return within 90 days HAL’s data in original media and should not keep HAL’s data, upon expiry of Tender/Contract/Agreement or early termination of Contract/Agreement and certify that HAL’s data has been deleted permanently. Non-adherence to this confidentiality clause by the Bidder/Contractor/Supplier shall be treated, as a material breach of this Tender/ Contract/ Agreement. The provisions of this clause shall survive and remain in force notwithstanding the termination or expiry of this Contract/Agreement.
44) Export License:
Vendors should categorically confirm the availability of export license from their government for exporting the system. Vendor shall be required to obtain and maintain all Export/Import licenses and permits etc., as the case may be, required for performing supplies against this tender. Obtaining export license shall be entire responsibility of the vendor.
45) Option Clause:
HAL reserves the right to order additional quantities up to __ % of the ordered quantity as per the price, terms & conditions of the resultant contract during the currency of the contract. It is entirely at the discretion of HAL to exercise this option. The additional quantities may be ordered in staggered manner in different years of supply at the discretion of HAL at any time during the currency/period of Contract.
46) Other Clauses
a. In the case of airborne material, the same should be covered by a Release Note or Airworthiness Certificate countersigned by person/s authorized by Government Airworthiness Certifying Authority.
b. Please indicate approximate net weight of each of the item and gross weight and dimension of the package to enable HAL to determine the mode of dispatch.
c. Please indicate in your tender, whether stores newly manufactured are offered. Where newly manufactured stores are offered and on inspection it is found that reconditioned
stores or parts have been used, such stores will be rejected at the contractor’s risk and expense. Manufacturing date of the items should not be older than 60 months
d. Please indicate if any training arrangements for item/system in India and factory acceptance test if required. (if applicable)
e. Please also indicate necessary onsite technical support during installation of the system at no extra cost.
f. Vendors should ensure the availability of spares of the offered products for a period of 10 years.
g. Two sets of operation manuals/maintenance manual should accompany the system at no extra cost. (if applicable)
h. Please also indicate status of export permit based on the present rules/regulations of your country and normal time frame for obtaining such export permission if an order is placed on you in near future and the same should be covered within the delivery schedule indicated.
i. Suppliers(OEM) while submitting the proposal should categorically declare that items quoted by them are their own manufactured products and are not resold (2nd sale). Offers without such declaration are likely to be ignored.
j. Quotation should accompany the detailed catalogues, literature and Data sheets.
k. Vendor should confirm that they are the original manufacturer of the stores referred to in this contract and has not engaged any individual or firm whether Indian or foreign whatsoever, to intercede, facilitate or in any way to recommend to the Government of India or any of its functionaries, whether officially or unofficially, the award of the contract to the seller nor has any amount been paid or intended to be paid to any such individual or intended to be paid to any firm in respect of any such intercession, facilitation or recommendation, vendor accepts that if it is established that the present declaration is in any way incorrect and if at any later stage it amount/commission to such individual/firm, vendor will be liable to pay the similar amount to HAL for engaging such individual/firm and making the payment as commission. In addition, vendor will also be debarred from entering into any supply contract with the Ministry of Defence, Government of India for a minimum period of 5 years. Vendors shall also consider cancellation of the contract without any entitlement or compensation to vendors who shall also be liable to refund all payments made by HAL in terms of the contract along
with the interest at the London interbank offer rate(LIBOR)
l. The Harmonized System of tariff nomenclature against the items for which quotation is rendered should be indicated.
m. Manufacturer's name and country of origin of the materials offered must be clearly specified. Complete details and illustrated literature must accompany all quotations.
n. Quotation should be free from correction, over-writing, using correcting fluid etc.
o. All drawings (photo/sketches) sent by HAL should be returned with quotations, if bidder is unable to quote HAL drawings/photos/sketches should also be returned immediately along with regret letter.
p. HAL is not bound to accept the lowest or any quotation and reserves the right of accepting the whole or any part of the quotation or part of the quantity offered and bidder must supply the same at the rate quoted.
q. Vendor shall not be entitled without HAL’s consent to assign or transfer to a third party all or part of the benefits or obligations under this contract.
r. HAL conditions of contract will govern any resultant order arising out of the enquiry (copy on application) and bidders quotation will be subject to the said conditions.
s. Bidder is required to send REGRET REPLY, in case the subject item is not covered in bidders range of products.
t. In the development orders, where technical inputs/assistance is provided to the vendors, the contract will be govern by Intellectual Proprietary Rights (IPR) laws.
u. Tender received from authorized dealer/distributor/channel partner to whom RFQ was not sent, will not be accepted, if the tender is not accompanied with the authorization letter from the vendor to whom RFQ/tender enquiry was issued.
v. Applicability of the statutory taxes (e.g. GST, etc.) should be explicitly indicated by the vendor in his response either in percentage or in absolute terms. In the absence of this input the offer would be considered all inclusive. RFP should incorporate the above appropriately.
47) Involvement of any Agent and Middlemen:
No involvement of Agents or Middlemen in India or abroad in any capacity whatsoever is permitted at any stage in relation with this tender and the resultant contract. Vendor shall confirm that he has not appointed any agent in India to promote this contract and that no commission etc. is payable to any such agent in connection with this contract. Vendor shall also confirm that he has neither paid nor will pay any commission, fee or any such charges to any agent in connection with the award and execution of this contract. Should it be subsequently proved that such a commission, fees or charge has been paid, contrary to the foregoing, buyer shall be entitled to terminate this contract forthwith. The buyer shall also be entitled to recover from the seller an amount equal to the commission, fees or any such charge proved to have been paid. HAL has not appointed / authorized any person / agent to deal with the vendors in respect of the said contract. In case, if someone claims and interacts with the vendors it shall be duty of the vendors to bring such instances to the notice of HAL Management
48) Purchase Preference Policy :
Preference to Make In India products (For bids < 200 Crore):Preference shall be given to Class 1 local supplier as defined in public procurement (Preference to Make in India), Order 2017 as amended from time to time and its subsequent Orders/Notifications issued by concerned Nodal Ministry for specific Goods/Products. The minimum local content to qualify as a Class 1 local supplier is denoted in the bid document. If the bidder wants to avail the Purchase preference, the bidder must submit/upload a certificate from the OEM regarding the percentage of the local content and the details of locations at which the local value addition is made along with their bid, failing which no purchase preference shall be granted. In case the bid value is more than Rs.10Crores, the declaration relating to percentage of local content shall be certified by the statutory auditor or cost auditor, if the OEM is a company and by a practicing cost accountant or a chartered accountant for OEMs other than companies as per the Public Procurement (preference to Make-in -India) order 2017 dated 04.06.2020. Only Class-I and Class-II Local suppliers as per MII order dated 4.6.2020 will be eligible to get the preference. Non - Local suppliers as per MII order dated 04.06.2020 are not eligible to contest if local suppliers are present. However, eligible micro and small enterprises will be allowed to participate. In case Buyer has selected Purchase preference to Micro and Small Enterprises clause in the bid, the same will get precedence over this clause. In case the item/product offered by Indian vendor has import content, then the value of import content shall be indicated in the quotation (in FE/INR as the case may be).
Minimum Local content (Make in India Policy):
The ‘local content’ requirement to categorize a supplier as ‘Class-I local supplier’ is minimum 50%. For ‘Class-II local supplier’, the ‘local content’ requirement is minimum 20%. Nodal Ministry/ Department may prescribe only a higher percentage of minimum local content requirement to categorize a supplier as ‘Class-I local supplier/ ‘Class-II local supplier’. For the items, for which Nodal Ministry/ Department has not prescribed higher minimum local content notification, it shall be 50% and 20% for ‘Class-I local supplier’/ ‘Class-II local supplier’ respectively.
That the bidder has to indicate MLC as part of offer & Self Certificate and Auditor might have also indicated MLC as per their certification. In case there is difference in those values, the lowest of them will be considered as the applicable MLC & the offer will be dealt accordingly. Other MLC information will be treated as invalid.
49) Public Procurement Policy for MSEs
Purchase preference to Micro and Small Enterprises (MSEs): Purchase preference will be given to MSEs as defined in Public Procurement Policy for Micro and Small Enterprises (MSEs) Order, 2012 dated 23.03.2012 issued by Ministry of Micro, Small and Medium Enterprises and its subsequent Orders/Notifications issued by concerned Ministry. If the bidder wants to avail the Purchase preference, the bidder must be the manufacturer of the offered product in case of bid for supply of goods. Traders are excluded from the purview of Public Procurement Policy for Micro and Small Enterprises. In respect of bid for Services, the bidder must be the Service provider of the offered Service. Relevant documentary evidence in this regard shall be uploaded along with the bid in respect of the offered product or service. If L-1 is not an MSE and MSE Seller (s) has/have quoted price within L-1+ 15% (Selected by Buyer)of margin of purchase preference /price band defined in relevant policy, such Seller shall be given opportunity to match L-1 price and contract will be awarded for 25%(selected by Buyer) percentage of total QUANTITY.
Supplier’s status as MSEs:
The aspect as indicated below would be applicable for procurement which falls under divisible category (i.e., not applicable for indivisible category). If any Indian vendor satisfies the requirement of MSEs stipulation and also falls within the purchase preference margin as called for in MSME policy (in case of matching L1 price) will be considered for ordering 25% of tendered quantity. The balance quantity/works will be considered for distribution amongst all bidders (including MSEs) as per this subject purchase preference policy. In case no MSEs qualifies for purchase preference or do not match with L1 price then the total tendered quantity will be distributed amongst all bidders as per this subject purchase preference policy.
50) HAL has not appointed any agent in India or outside India for procurement of any items and deals directly with vendors. In case any individual or firm approaches you posing themselves as an authorised agent of HAL, it is requested that you should not entertain such claim and in addition inform immediately to HAL.
51) Arbitration:
(Note: Suggested to use the below clause (a) only for issuing RFPs other than to DPSUs or PSUs or MSEs. For DPSUs or PSUs, AMRDC clause (b) below to be included. For MSEs, clause (c) below need to be included and in case, if RFP calls for all types of bidders then appropriate clauses need to be included, stating categorically which clause applies to whom)
a) Clause for other than DPSUs or PSUs:
All disputes or differences whatsoever arising between the parties out of or relating to the construction, meaning and operation or effect of this Contract or the breach thereof shall be settled by Arbitration in accordance with the Rules of Arbitration of the Indian Council of Arbitration or International Centre for Alternative Dispute Resolution (ICA/ICADR) and the award made in pursuance thereof shall be binding on the parties. The provisions of the Arbitration and conciliation Act 1996 or any statutory modifications thereof shall apply to such legislation.
b) Clause for DPSUs or PSUs: In the event of any dispute or difference relating to the interpretation and application of the provisions of commercial contract(s) between Central Public Sector Enterprises (CPSEs)/ Port Trusts inter se and also between CPSEs and Government Departments/Organizations (excluding disputes concerning Railways, Income Tax, Customs & Excise Departments), such disputes or differences shall be taken up by either party for resolution through AMRCD (Administrative Mechanism for Resolution of CPSE’s Disputes) as mentioned in DPE OM No. 05/0003/2019-FTS-10937 dated 14-12-2022 and the decision of AMRCD on the said dispute will be binding on both the Parties.
c) Applicable only for MSEs:
The Micro, Small and Medium Enterprises Development (MSMED) Act, 2006 provides parties to a dispute (where one of the parties is a Micro or Small Enterprise) to be referred to Micro and Small
Enterprises Facilitation Council if the dispute is regarding any amount due under Section 17 of the MSMED Act, 2006. If a Micro or Small Enterprise, being a party to dispute, refers to the provisions in
MSMED Act 2006, these provisions shall prevail over the Indian Arbitration and Conciliation Act, 1996 and its statutory modifications thereof.
52) QC CONDITIONS:
In general each vendor shall provide a compliance report for all the RFQ conditions including the QC Conditions mentioned below:
1. Supplies of components/parts should be preferably from the recently manufactured batch but not older than 60 months from the date of manufacture.
2. OEM or Authorized Distributor Certificate of Conformance (CoC) and Supplier CoC traceable to OEM or Authorized Distributor to be provided along with the supplies.
3. In case of item declared OBSOLETE / PRODUCTION-HOLD / PRODUCTION-END by OEM; only Supplier CoC to be provided along with supporting documents regarding obsolescence.
4. In case of ( uncased die ) components, only supplier CoC to be provided along with supplies
5. In case of delay lines, test report in addition to CoC is required.
6. Unassembled connectors should be supplied in individual packing along with assembly instruction. Part number of the connectors to be indicated preferably on the connector.
7. In case of Electrical wires & cables, test report and supplier CoC is required. In case of catalogue part number of Electrical wires & cables, OEM CoC is mandatory.
8. Surface Mount Devices (SMD) should be supplied in Tape or Reel form (as applicable)
9. In case of Moisture Sensitive Devices (MSD), packaging should be as per MSL requirements. Necessary label/instruction should be indicated on the package for handling.
10. ESD safe packaging to be followed as applicable.
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
raw.json
RAW_JSON
GFRDOCFORM.pdf
TENDER_DOCUMENT • 0.01 MB
RFQCONDITIONS2024.xls
TENDER_DOCUMENT • 0.11 MB
224118RFQ.pdf
TENDER_DOCUMENT • 0.47 MB
IPFormat.pdf
TENDER_DOCUMENT • 0.18 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .