Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹40.6 LAccepted-AOC | L1 | Accepted-AOC Being L1 | |
| 2 | L2₹41.0 L+₹15,245.25 (0.37%)Rejected-Finance | L2 | Rejected-Finance being other than L1 | |
| 3 | L3₹44.0 L+₹3.2 L (7.76%)Rejected-Finance 59 100 AJIT NAGAR GATE KHERIA AGRA 282008 | AGRA | AGRA | UTTAR PRADESH | 282008 | L3 | Rejected-Finance being other than L1 | |
| 4 | L4₹47.5 L+₹6.6 L (16.3%)Rejected-Finance | L4 | Rejected-Finance being other than L1 |
Tender Value
₹50.0 L
EMD Value
₹99,900
Closing Date
17 Sept 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE EAST AGRA
GE East Agra, Military Engineer Services, Gwalior House, 62 Taj Road Agra Cantt 282001
ADDN / ALTRN TO OLD BFSR BLDG AT 509 ABW AND CERTAIN MINOR WORKS UNDER GE (EAST) AGRA
2022_MES_546012_1
9508/E8
Open Tender
Civil Works
Item Rate
180 days
AGRA
Please refer tender documents
9 documents required · 9 mandatory
₹500
Yes
GE EAST AGRA
₹99,900
Yes
7 Nov 2022
18 Aug 2022
27 Sept 2022
18 Aug 2022
17 Sept 2022
2 Sept 2022
Amount
Demolition of cement concrete (unreinforced) in ground floors and pavings n.exc 15cm thickness (below or above ground level) complete all as specified and directed.
Demolition of cement concrete (unreinforced) in any position n.exc 15cm thickness (below or above ground level) complete all as specified and directed.
Dismantling of structureal steel work inclduing doors, gates in any position complete all as specified and directed.
Supply only integral water proofing compound liquid complete all as specified and directed.
Demolition of brick work or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars etc but excluding ashlar ficings, dressed stone work and pre-cast concrete articles complete all as specified and directed.
Roughening of old concrete floor by picking , sweeping clean and washing down with water to remove dust Brushing neat cement slurry with 3.0kg of cement per sq. metre complete all as specified and directed.
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) complete all as specified and directed.
Taking down cement or cement lime plaster of any discription on brick or stone walls/ ceilings etc, including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.
M&L for brick work with sub class ‘B’ bricks old size, straight or curved on plan exc 6 M mean radius, built in CM 1:6 complete all as specified and directed
S&F mild steel joist channel angle or tee sections fixed independently with out connecting plates etcof gradeW(Gde-E-250)quality-B complete all as specified and directed..
M&L for 10mm thick rendering in CM 1:6 on any faces of brick or concrete surfaces of walls & finishing the surface even and fair complete all as specified and directed.
M&L for 15mm thick rendering in CM 1:4 on brick or concrete surface with water proofing compound @ 2% by weight of cement finished fair complete all as specified and directed. Note : Water proofing compound will be measured and paid seperately under respective item of Sch ‘A’.
M&L for 15 mm thick rendering in CM 1:6 on other than fair faces of brick or concrete surface with finished fair and even complete all as specified and directed.
M&L for coloured glazed ceramic tiles (Digital & designer Pattern) in vertical surface 350 x 250 x 7 mm / 450 x 350 x 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match tiles including 10mm thick rendering in CM 1:3 on brick wall complete all as specified and as directed .
M&L glazed ceramic non skid joint free coloured tiles (1st quality/premium quality) 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.16 Sqm but not exc. 0.36 Sqm as in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles laid over and including 15mm thick screed bed or bedding layer of cment mortar (1:6) complete all as specified and directed.
M& L for vitrified ceramic tiles 10 mm thick(square/rectangular) polished,area of each tiles not exceeding 0.38 sqm, in floor etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15 mm thick screed bed in CM ( 1:4) including dismantling of existing tiles with screed bed complete all as specified and as directed.
M& L for vitrified ceramic tiles 10 mm thick(square/rectangular) polished,area of each tiles not exceeding 0.38 sqm, in vertical surface skirting / dado etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match over 10 mm thick cement plaster in CM ( 1:3) complete all as specified and as directed.
M&L 75mm thick cement concrete 1:2:4 type B-2 (using 40 mm graded stone aggregate) as in path / floor complete all as specified and directed.
S & F 15 mm bore chromium plated fancy bib taps, cast copper alloy, with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed.
S&F in repairs 10 ltrs capacity PVC flushing cistern low level (white) with inlet ball valve and handle including brackets, rubber bush, washers etc complete all as specified and directed.
S&F 15 mm bore CP Stop valves, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified & directed.
Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre lineover fittings and accessories) complete all as specified and directed.
S & F 75mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints, fixed to wall complete all as specified and directed.
S & F 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints, fixed to wall complete all as specified and directed.
S & F 75 mm bore PVC (SWR) bends of any radius complete all as specified and directed.
S & F 110 mm bore PVC (SWR) bends of any radius complete all as specified and directed.
Taking up or down 15mm bore steel tubing and connection complete all as specified and directed.
Taking up or down 20 mm bore steel tubing and connection complete all as specified and directed.
S&F 15mm bore steel water tubing, medium grade, galvanized including fittings and fixed to walls, ceilings, floors or laid in floors complete all as specified and directed.
S&F 20mm bore steel water tubing medium grade galvanized including fittings and fixed to walls, ceilings, floors or laid in floors complete all as specified and directed.
Refixing old steel water tubing 15mm dia with and including new GI fittings and connected to new or old positions of walls, ceilings, floors etc complete all as specified and directed.
Refixing old steel water tubing 20 mm dia with and including new GI fittings and connected to new or old positions of walls, ceilings, floors etc complete all as specified and directed.
Cutting chases for pining in for GI pipe ,conduite complete all as specified and directed.
S&F vitreous china wash down water closet pan pedestal pattern white (excluding fixng bolt flushing cistern and flush pipe) fixing in repair complete with seat cover white closed pattern with flat bottom and cover and mild steel chromium plated or aluminium hingeing device complete all as specified and directed.
S&F 500 ltrs capacity rotational moulded polyethylene water storage tank double layered, ISI engraved (cylindrical vertical with closed top) hoisted and fixed in position complete all as specified and directed.
S&F 20mm dia ball valve high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe 20 mm dia (minimum weight - 210 gm) complete all as specified and directed.
Dismantling Water tanks, exc 250 ltr and n exc 500 ltr capacity open or closed, hoisted and fixed in position complete all as specified and directed.
S&F PVC connection 15mm size with PTMT nuts, 450 mm long complete all as specified and directed.
S&F in PVC connection 15mm size with PTMT nuts, 600 mm long complete all as specified and directed.
S&F Vitreous china wash basin white flat back size 550 x 400mm including waste pipe chain plug brackets and 32mm dia bore brass CP coupling complete all as specified and directed. .
S&F 15mm bore, brass chromium plated pillar cock (foam flow) screwed down for pipe and fixed complete all as specified and directed.
S&F 32 mm dia PVC waste pipe for wash basin /sinks 800mm long including brass CP waste coupling complete all as specified and directed.
S & F tubular towel rail 600 mm long brass chromium plated 20 mm Dia :"D" type fixed with and including chromium plated brass screws and wooden/plastic cleats complete all as specified and directed.
S&F 75 mm dia of outlet PVC floor trap, with grating incl jointing to waste pipe fixed in cement concrete 1:2:4 type B1(using 20 mm graded stone aggregate) complete all as specified and directed.
S&F 150 mm square PTMT grating with openable flap (Min weight 100 gms). complete all as specified and directed.
S&F health faucet CP 15mm bore with connection pipe 1 mtr long suitable for EWC complete all as specified and directed.
S&F 15 mm bore brass chromium plated fancy type wall mixer with provn for OHS with 190mm long bend pipe wall flange complete all as specified and directed
S&F 15mm bore brass chromium plated fancy type central hole basin mixer without popup waste system with 450mm long flexible hose complete all as specified and directed.
Taking down Chowkhats orframes not exc. 1.5 sq. m but (without taking off shutters from the frames each complete all as specified and directed.
Taking down Chowkhats orframes exc. 1.5 sq. m but n. exe 4 sqm (without taking off shutters from the frames each complete all as specified and directed.
S & F 25 mm thick Flush shutters, solid core construction, with particle board core and plywood face panels, commercial type on both sides complete all as specified and directed.
S&F II nd class hard wood Plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. , kiln seasoned and chemically pressure treated complete all as specified and directed.
M&L Mild steel farmed work as in doors (as in ckowkats) or gates of angle or other section with guest plates rail, brasses rail etc exculsive of steel sheeting or other covering hanging also fastening and fixing complete confirming to GdeFe-410-W(Gde-E-250)quality-B including shop coat of red oxide including prepration of surface before fixing complete all as specified and directed.
S&F Steel windows or ventilators, fixed type, with glazing bars dovetailed or welded complete all as specified and as directed.
S&F 100 mm long SS Butt hinges complete all as specified and directed.
S&F 150 mm long aluminium alloy handles, fabricated type, anodised complete all as specified and directed.
S&F 200mm long Aluminium anodised,barrel tower bolts of extruded section and fixed complete all as specified and directed.
S&F 300 long Aluminium alloy, anodised,sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed.
S & F Mild steel Angles, bars, flats etc., as in supports for stiffening of fencing, wall ties, hold fasts, clamps, plain angle cleats for securing purlins and similar small articles confirming toFe-290 Gde-E-165 complete all as specified and directed.
S& F Factory made Solid PVC Moulded Door Shutter with Particle Boarde core, 28 to 30 mm thick (stiles), with 2,4 or 6 raised panel design with 2 mm thick Moulded PVC sheet on the front face & 2 mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing. complete all as specified and directed.
S&F Solid PVC frame (Single Rebated) of size 60mm x 30mm made out of solid PVC foam with homogenous fine cellular structure having smooth outer integral skin with suitable metal stiffner and fixed with 100 x 8 sheet metal CSK screws complete all as specified and as shown on drawing (Note :- Door frame shall be water proof, termite proof, elegant and should have excellent screws holding strength to fix hinges and hold doors properly for a long life) complete all as specified and directed.
S & F Mild steel work in framed work such as grills, gratings, guard bars etc, with ends of bars shouldered and/ or riveted, or forged into spikes, and similar work confirming to Fe290 - Gde E-165 complete all as specified and directed.
S & F Galvanized mild steel wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned stacks, or galvanized wire staples complete all as specified and directed
S & F in repair Galvanized mild steel wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned stacks, or galvanized wire staples complete all as specified and directed
S&F 3 mm thick Figured glass, pin headed type and glazing with oil putty in squares not exceeding 0.5 Sq. M in each pane complete all as specified and directed.
S&F in repair 3 mm thick Figured glass, pin headed type and glazing with oil putty in squares not exceeding 0.5 Sq. M in each pane complete all as specified and directed.
M&L Providing, cement concrete 1:2:4 type B1, (using 20mm graded stone aggregate) as in lintels upto 1..5 m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, water troughs and the like including weathering, slightly rouinded for chamfered angles and throating, complete all as specified and directed.
Dismantling of Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets complete all as specified and directed.
S&F anodised aluminium/GI snap grid frame work for false ceiling all as specified of grid 605 x 605 including GI hangers of suitable dia and fixed to purlin/rafters complete all as specified and directed.
S&F 4 mm thick Non asbestos fibre cement building boards fixed or laid/ inserted to timber/GI/Aluminium framework with screws complete all as specified and directed.
S&F of Anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified and directed.
S&F aluminium anodised grill (DG 104) 10mm x 5.2mm thick on Deco grill or equivalent fixed with 'F' section approved make all as specified and directed.
S&F of sheet glass 4.80mm thick ordinary quality and fixed with aluminium beading and rubber gasket in square exc 0.5 sq. m in each pane of aluminium door and window complete all as specified and directed.
Hacking out old broken glass (any thickness, size quality or description) from wooden or metal frames, glazed with putty or fixed with beads etc complete all as specified and as directed.
S & F for 3 mm thick sheet glass ordinary quality and glazing withoil putty in square exc 0.5 Sqm in each pane complete all as specified and directed
Taking down aluminium door and re-fixing aluminium door in the same opening after repairing/ replacement of defective parts in cluding aluminum beading and rubber gasket for smooth functioning of door (sheet glass shall be measured and paid separately) complete all as specified and directed.
S&F aluminium partition of specified aluminium section (83:44;2mm) thick including aluminium beads rubber gasket and 5mm thick frosted glass in upper portion and 12 mm thick prelaminated particle board, exterior grade prelaminated one side with decorative choice lamination & other side balancing white lamination complete all as specified and directed.
M&L for applying two coats of Cement base paint over one coat of primer incl preparation of new or previously untreated surface complete all as specified and directed.
M&L for preperation of newly plaster surface of wall and applying two coats of oil bound distamper over 3mm thick wall putty complete all as specified and directed
S&F anodized aluminium door & frame 2mm thick incl- 5.00mm thick tinted glass in half portion and in other half portion 12 mm thick prelaminated particle board, exterior grade prelaminated one side with decorative choice lamination & other side balancing white lamination complete and fixed with anodized aluminium snap beading, glazing clips, joining clips, screws and 02Nos of aluminium handle on each door shutter, aluminium anodized tpwer bolt 200mm long 02 Nos on each shutter and martice lock device complete with double keys for each lock, 01 No Floor spring for each shutter complete all as specified and directed with following specifications:- (a) Aluminium door frame = 101.50x44.45mm (b) Aluminium style/top & middle rails of shutter = 83.5x44.45mm (c) Aluminium bottom rail of shutter = 114.50x44.45mm (d) Aluminium door frame with shutters shall be fixed in position in brick wall opening as required according to site conditions including all fastening arrangements etc complete all as specified and directed
M & L 3mm thick high density anti-static epoxy based heavy duty industrialflooring and topped with 1mm thick of self levelling compound to achieve total thickness of 4 mm including surface perparation and primer application and including earthing of charge dissipation with seif adhesive copper tape @ 600 x 600 mm grid to the earthing points complete all as specified and directed.
S & F lnsulated PVC Wall Lining 5 mm thick, consisting of PVC Insulated Panels having expanded polystyrene (EPS) stuck to 2mm thick plain colour PVC sheet duly fitted into the wall as per specifications and drawing complete all as specified and directed.
M&L for 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification and drawing complete all as specified and directed.
M&L Preparing old plastered or unplastered surfaces of walls and applying two coats of oil bound distamper over a coat of average 2mm thick Birla putty complete all as specified and directed.
Excavation in trenches n. exc 1.5 m wide and n.exc 1.5 m in depth for foundation etc or depth for foundation etc or for shafts, wells, cesspits, pier holes etc n. exc 10 sqm on plan and n. exc 1.5 m in depth and getting out in soft and loose soil complete all as specified and directed.
M&L cement concrete 1:4:8 type D2 (using 40 mm graded stone aggregate ) in foundation filling and mase concrete complete all as specified and directed.
M&L for M-30 Reinforced cement concrete as in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and directed.
M&L Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.
-Ditto- all as per item No 89 above but 6 to 8 mm dia as in stirrups confirming to TMT bars complete all as specified and directed.
M&L for Mild steel screw 11 to 15mm dia bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, length of bolt exc 22.5cm and n exc 30cm long complete all as specified and directed.
Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter rough finished surface of concrete complete all as specified and directed.
Removing surplus soil to a distance n. exc 50 m and depositing where directed at a level n. exc 1.5 m above starting point complete all as specified and directed.
Excavation over area n.exc. 1.50m deep and getting out in soft/loose soil complete all as specified and directed.
-ditto- all as per item No 94 above but depth exc 1.5m but n.exc. 3.00m complete all as specified and directed.
M&L for 100mm thick Cement concrete 1:2:4 type B-1 (using 20mm graded stone aggregate) as in flooring complete all as specified and directed.
M&L for old size brickwork with sub class ‘B’ bricks in one brick thick honey comb walling, built in cement mortar 1:6 complete all as specified and directed.
M&L M-25 Reinforced cement concrete as in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and as directed.
M&L for precast reinforced cement concrete 1:2:4 type B1 (using 20 mm graded stone aggregate) in landings, cover slabs (for manholes etc) shelves and similar articles with plain faces and set in cemnet mortar 1:4 complete all as specified and directed.
M&L for form work to soffits of suspended slab such as roof slabs, floor slabs, landings and similar work n exc 200 mm thick (Horizontal or sloping) flat rough finished surfaces complete all as specified and directed.
M&L for Returning filling in, including spreading, leveling, watering and well ramming in layers not exceeding 25 cm in soft/loose soil complete all as specified and directed.
M&L for 150mm bore salt glazed stoneware pipes in drain/sewage line of Grade'A' complete all specified and directed.
M&L for Concrete bed 1:3:6 type C-2 (using 40 mm graded stone aggregate) to drain pipes including packing under, and haunching against the sides of pipes after they are laid and tested all specified and directed.
Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc. complete and all as specified and removing from site complete all as specified and directed.
M&L point wiring with 1.5 sqmm multi stranded copper conductor 1100 volts. grade FRLS PVC insulated unsheathed cable with proper colour coding drawn in including stove enammelled steel conduit not less than 20 mm dia with all accessories and FRLS PVC insulated 1.5 Sqmm multi standard sheathed copper wire for continues earth, sunk in cast iron/Pressed steel terminal boxes 60 mm deep & 1.6 mm thick duly painted with aluminum inside and anticorrosive paint out side, including 3 mm thick plastic laminated sheet for mounting switches, sockets, fan regulators etc connecting earth and making good to the disturbed surface of wall/floor and matching with existing specifications. Connections of cable with MCB's or bus bar shall be done through proper size copper/brass thimbles. Note :Conduit shall be fixed on surface of roof with necessary saddles where concealing of conduit is not feasible at no extra cost for the following :- (a) One light /fan point controlled by one switch
-Ditto- all as per item No 105 above but One 5 pin socket outlet 5 Amps on independent board
-Ditto- all as per item No 105 above but One 5 pin socket outlet 5 Amps on same board
-Ditto- all as per item No 105 One bell/buzzer point controlled by one push button on the same board with other switches or independent
-Ditto- All as per item No 105 here in before but with cable size 4 Sq mm for one AC socket out let on independent board and multistrand insulated copper earth continuity conductor of size 4 sqmm all as specified and directed
Supply and fix switch piano flush button single pole one way 5 amps 240 volts with polycarbonate body complete all as specified and directed.
Supply and fix Switch piano flush button single pole one way 15 amps 230 Volts with polycarbonate body all as specified and directed.
Supply and fix socket 5 amps 5 pin flush type, 240 volts. with polycarbonate body complete all as specified and directed.
Supply and fix socket out let, 6 pin 5 and 15 amps multi purpose 2 in 1 flush type, 230 volts with polycarbonate body complete all as specified and directed.
Supply and fix stepped type electronic fan regulator flush type on the existing phenolic laminated sheet etc. as reqd, complete all as specified and directed.
Supply and fix ceiling rose , PVC/polycarbonate, insulated body surface Bakelite 65mm dia three terminals complete all as specified and directed.
Supply and fix Lamp holder/angle holder insulated body with black/white plate for batten fittings with LED bulb complete all as specified and directed.
Supply and fix call bell, Ding dong type, 230 volts AC single pole complete all as specified and directed.
S & F electronic dimmers, 450W, 250V flush type on the exiting phenolic laminated sheet etc. complete all as specified and directed.
Supply and fixing LED luminaire 595 mm x 595 mm, 40 watt, 220 V AC, 6500 K recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver and connecting the same to electric source with & using PVC sheathed and insulated three core copper conductor cable of size 0.75 Sqmm and fixing arrangements for fixing the light fitting complete all as specified and directed.
Supply and fix LED lights fitting 1x 20W(batten and rod separate), 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as as specified and directed.
Supply and fix Single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB complete all as specified and directed.
Supply and fix Triple pole and earth encolsure with a three pin and earth plug with socket complete with one triple pole MCB complete all as directed all as specified and as directed.
Supply & fix in repair/replacement of sheet metal enclosure Vertical TPN DB 4 Way As per IEC 61439-3, Suitable for Flush Mounting and Surface Mounting, With 250 A Copper Busbar for each phase with 2 Neutral bar, 2 Earthbar and Cable ties for Cable management, fully insulated busbar & shrouded Neutral bars, Improved Pan assembly for ease of installation, Prefitted masking sheet, Reversible Door for IP 54 DB's, With provision for 250 Amp MCCB as incomer and SP/TP MCB's as outgoing complete all as specified and directed.
S&F sheet metal enclosers Single pole & neutral 16 way with 200 amps rated bus bar, IP-54. double door complete all as specified and directed.
S&F sheet metal enclosers Single pole & neutral 12 way with 200 amps rated bus bar, IP-54. double door complete all as specified and directed.
Supply and fixing in repair MCCB 4 pole, 250 Amps, 50 Hz, Icu=16 KA at 415 volts with thermal magnetic alongwith adjustable magnetic protection for current setting Icu=Ics = 100% with adjustable over load setting (minimum 70% to 100%) value from 10 to 15 times of related capacity as per IEC-60947-1 and 60947-2 standard complete all as specified and directed.
Supply & fix sheet metal enclosure MCB distribution board. Single pole & neutral 240 volts 12 way with IP-43 protection double door complete with appropriate size bus bar and neutral link complete all as specified and directed.
Supply and fixing in repair MCB SP 1 to 32 Amp rating 240V, 10KA 'C' curve and current carrying capacity in the MCB DB complete with connection testing and commissioning complete all as specified and directed.
Supply and fixing in repair MCB SPN 40 to 63 Amp rating 240V, 10KA 'C' curve and current carrying capacity in the MCB DB complete with connection testing and commissioning complete all as specified and directed.
Supply and fixing in repair MCB TPN 16 to 32 Amps, 415V 10KA 'C' curve and current carrying capacity in the DB complete with connection testing and commissioning. complete all as specified and directed.
S&F sub Main Wiring with two single core FRLS PVC insulated unsheathed multistranded flexible copper conductor cable of size 2x4 sqmm and one single core PVC insulated multistranded unsheathed flexible copper conductor 1x1.5 sqmm size (green colour) cable as earthing lead connecting to main earthing dolly drawn in Steel Conduit not less than 20 mm dia including dismantling of old unsv submain wiring complete all as specified and directed.
S&F sub Main Wiring with three single core FRLS PVC insulated unsheathed multistranded flexible copper conductor cable of size 2x6 sqmm and one single core PVC insulated multistranded unsheathed flexible copper conductor 1x4 sqmm size (green colour) cable as earthing lead connecting to main earthing dolly drawn in Steel Conduit not less than 32 mm dia including dismantling of old unsv submain wiring complete all as specified and directed.
S&F sub Main Wiring with three single core FRLS PVC insulated unsheathed multistranded flexible copper conductor cable of size 2x10 sqmm and one single core PVC insulated multistranded unsheathed flexible copper conductor 1x10 sqmm size (green colour) cable as earthing lead connecting to main earthing dolly drawn in Steel Conduit not less than 40 mm dia including dismantling of old unsv submain wiring complete all as specified and directed.
S&F sub Main Wiring with three single core FRLS PVC insulated unsheathed multistranded flexible copper conductor cable of size 4x10 sqmm and one single core PVC insulated multistranded unsheathed flexible copper conductor 1x10 sqmm size (green colour) cable as earthing lead connecting to main earthing dolly drawn in Steel Conduit not less than 40 mm dia including dismantling of old unsv submain wiring complete all as specified and directed.
M&L for earthing complete with galvanized earth plate electrode 600 x 600 x6mm thick burried directly in ground vertically to a depth not less than 2.25 M below normal ground level ) with top edge of the plate not less than 1.50 M below normal ground level , connected to and including galvanised iron strip 32x6mm dia as earth lead soldered and riveted to earth plate by means of nuts, bolts, check nuts & washers, of galvanized iron or steel with connected to test point and testing on completion including 15mm GI light grade pipe for earth lead protection from earth point to earth plate, including provn adequate quantity of charcoal dust mixed with 35 % common salt to a packed thickness of not less than 15 cm in alternate layers of charcoal and salt on all sides of earth plate with 20mm bore medium grade GI Pipe for watering,GI check nut, funnel and wire mesh with and including all necessary excavation & earth work in soft/loose soil, returning filling in, removal of surplus soil to a distance 50 metre,,PCC 1:3:6 type C-1 as in earth pit, 40 mm thick RCC cover using cement concrete 1:2:4 type B-1 reinforced with & including 8 mm dia mild steel TMT bar @ 100 mm c/c Both way with suitable handle for lifting arrangement & including form work complete all as specified and shown in electrical plate No 3 of MES SSR Part I 2009 and as directed. NOTES:- (i) On testing, after completion of Job, if desired earth resistance is not obtained, the earthing shall be redone at without any extra cost by contractor.
M&L for earthing complete with copper earth plate electrode 600 x 600 x3.15 mm thick burried directly in ground vertically to a depth not less than 2.25 M below normal ground level ) with top edge of the plate not less than 1.50 M below normal ground level , connected to and including copper strip as earth lead soldered and riveted to earth plate by means of nuts, bolts, check nuts & washers, of copper with connected to test point and testing on completion including 15mm GI light grade pipe for earth lead protection from earth point to earth plate, including provn adequate quantity of chemical, charcoal dust mixed with 35 % common salt to a packed thickness of not less than 15 cm in alternate layers of charcoal and salt on all sides of earth plate with 20mm bore medium grade GI Pipe for watering,GI check nut, funnel and wire mesh with and including all necessary excavation & earth work in soft/loose soil, returning filling in, removal of surplus soil to a distance 50 metre,,PCC 1:3:6 type C-1 as in earth pit, 40 mm thick RCC cover using cement concrete 1:2:4 type B-1 reinforced with & including 8 mm dia mild steel TMT bar @ 100 mm c/c Both way with suitable handle for lifting arrangement & including form work complete all as specified and shown in electrical plate No 3 of MES SSR Part I 2009 and as directed. NOTES:- (i) On testing, after completion of Job, if desired earth resistance is not obtained, the earthing shall be redone at without any extra cost by contractor.
Supply and lay in replacement of XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 70 sq. mm 3.5 core complete all as specified and directed.
Material and labour for sand cushioning with dry river sand in trenches for cushioning of underground cable line including spreading, leveling, well ramming completed all as specified and directed.
Supply and laying well burnt sub class ‘B’ bricks. ( designated 75) locally available best quality laid dry in trenches for protection of underground cable complete all as specified and directed.
Supply and lay in replacement GI tube light grade 40 bore as in cable protection pipe including all fittings complete all as specified and directed.
Supply, installation, testing and commissioning voltage stabilizer, out door type, copper wound for servo controlled 3 Phase 50 HZ for automatic controlling/ regulating of voltage comprising of auto transformer, servo motor, auto controlled citcuit (Sutiable for supply from DG set also) and other fitting and acessories and voltmeter (0-300 Volt -03 Nos) to read input and output voltage per Phae and Amp meter with selecrtor switch to measure the load independently, main/ low/high limit indicators, manual increase/decrease push switch auto/ manual switch with protection for main fail, main over/under voltage, phase fail, over protection adjustment in auto mode output rays/ lower in manual mode , output over load, short circuit protection with oil cooled capacity 50 KVA and design input voltage 290-460 voltage AC , 50 HZ, 3 Phase 4 wire output voltage 415 V AC, voltage regulation with accuracy± 2.5% and speed of correction 8 Volts per second and over load capacity 110% for 10 minutes and 125% for 1 minute, Protection - IP 54. complete all as sepcified and directed.
Supply and lay MS Pipes heavy grade with all fittings laid in floors or fixed to walls and ceilings etc of sizes 25 mm for Air compressor of capacity 150 psi (pipe colour should be Brown). Complete all as specified and directed.
Supply and lay M S Pipes heavy grade with all fittings laid in floors or fixed to walls and ceilings etc of sizes 20 mm for Nitrogen at 60 psi (pipe colour should be Blue) Complete all as specified and directed.
Supply and lay M S Pipes heavy grade with all fittings laid in floors or fixed to walls and ceilings etc of sizes 20 mm for Nitrogen at 10 psi (pipe colour should be Blue) Complete all as specified and directed.
Supply and fix single/three phase Emergency stop Switch Type: Flush Push Button, Mushroom type, Waterproof. Complete all as specified and directed.
Supply and install hi wall split units indoor/outdoor complete with cordless remote control unit and with in built air ioniser and Plasma filter for better indoor air quality with minimum 4 star rating and EER 3.2.of capacity 2.0 Ton Complete all as specified and directed.
Supply , assembly and erection of GI sheet with TDF flange rectangular/square duct made out of 'L' shaped hollow profile, duly factory boxed, incl all accessories such as Corner, Cleat, Carriage bolt, Gasket and appropriate sealant on longitudinal joints etc complete of size 18 Gauge complete all as specified and directed.
Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC), complete all as specified and directed.
Supply and fixing LED building security light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and directed.
S&F sub Main Wiring with two single core FRLS PVC insulated unsheathed multistranded flexible copper conductor cable of size 2x6 sqmm and one single core PVC insulated multistranded unsheathed flexible copper conductor 1x4 sqmm size (green colour) cable as earthing lead connecting to main earthing dolly drawn in existing conduit complete all as specified and directed
Supply, fixing, connecting & testing factory made, epoxy powder coated, distribution board (sheet metal encloser) , singe pole and neutral, 8 ways, (Horizontal DB's) ,with metal door and fixed flush to wall and suitable for universal mounting with having copper bus bars of capacity 200 Amps rating, of suitable size , for double door and suitable for using MCB, SPN as incomer and MCBs SP as out going, conforming to IS : 13032 complete all as specified and directed.
Supply and lay in replacement of XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 16 Sqmm 2 Core, Complete all as specified and directed.
Supply and lay in replacement GI tube light grade 25 size as in cable protection pipe including all fittings complete all as specified and directed.
Supply, Installation, commissioning of water cooler fully stainless steel, electric driven (single phase), having approx storage and Nominal cooling capacity of 60/120 litre per hour complete all as sepcified and directed. Make : Voltas/Blue star/Usha Shriram
Supply and fix voltage stabilizer for automatic operation, single phase naturally air cooled indoor type & designed for input variation between 170V to 250V with output voltage stabilized at 230V with accuracy of + 2.5% and of capacity 4.0 KVA complete all as sepcified and directed. Make : V Guard/SUPPA/Kiranotics/Microtex/Luminous
Supply and fixing MCB SPN 10 to 40 Amp rating 240V, 10KA 'C' curve and current carrying capacity in the MCB DB complete with connection testing and commissioning complete all as specified and directed.
M&L for submain wiring alongwith earth wire with 2 single core 4Sqmm PVC insulated unsheathed cable multi stranded copper conductor 1100 V grade and including drawn through in PVC casing caping heavy duty 20mm dia ISI marked with complete accessories including continuous earth wire of PVC insulated unsheathed copper conductor cable of size 4Sqmm complete all as sepcified and directed.
VASUNDHARA AND COMPANY
deva engineers
CREATIVE CONSTRUCTION
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .