PROVN OF GUARD ROOM AT INF BN LBW 88 AND TOILET BLOCK NEAR TRG AREA 6 JAK RIF LBW 89 AT SI LINES UNDER GE BHOPAL

Amount

Surface excavation not exc 30 cm deep and averaging 15cm deep and getting out in hard/dense soil complete all as specified and directed.

Excavation over area n. exc. 1.5m deep and getting out in hard/dense soil, complete all as specified and directed.

Excavation in trenches, not exceeding 1.5m wide and not exceeding 1.5m in depth for foundation, etc or not exceeding 10 Sqm on plan and not exceeding 1.5m in depth for shafts, cesspits, manholes, pier holes, etc and getting out in hard/dense soil complete all as specified and directed.

M&L for Moorum/red bajri filling in floors or pavings, laid in layers not exc. 15cm thick, spread, levelled and blinded with earth and rammed including watering complete all as specified and directed.

M&L for Hard core of broken stone or boulders of gauge not exceeding 63mm, deposited, spread and levelled in layers not exceeding 15cm thick, watered and rammed to a true surface complete all as specified and directed.

Returning, filling in excavated approved soil, including spreading, levelling, watering and well ramming in layers not exceeding 25cm each complete all as specified and directed.

Removing excavated soil not exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and directed.

S&F Pressed steel frames of size 125mm x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, with & including filing of cement concrete typ B-0, 1:2:4 using 12.5mm graded stone aggregates inside frames complete all as specified and directed.

M&L for factory made Second class hardwood 35mm thick plain, framed, panelled shutters (any number of panels) with panels of timber flat on both sides (feather edged) or of 12mm thick veneered particle board medium density, wood particle board with commercial face veneers complete all as specified and directed

M&L for factory made Second class hardwood glazed and skeleton window shutters 30mm thick, open rebated and prepared to receive glass, gauze, etc (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc conforming to IS:1003 complete all as specified and directed.

S&F 300 mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast aluminium alloy and fixed complete all as specified and directed.

S&F 100mm butt hinges, medium weight, cold rolled mild steel fixed, complete all as specified and directed

S&F 150 mm long aluminium anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed.

S&F 150 mm long aluminium handles, cast type, anodised fixed to shutters complete all as specified.

S&F Mild steel conforming to Fe-290 Gde E-165 in framed work such as grills, gratings, etc with ends of bars shouldered and/or riveted or forged into spikes; framed guard bars; ladders; railings and similar work complete all as specified and directed.

Supplying, fabricating and fixing powder coated (minimum thickness 50 micron) aluminium sections of required size for door windows frames shutters and partitions including aluminium hinges of required size jointing cleats, screws sash fasteners, plug for fixing with walls, columns, etc complete all as specified and directed. [MAKE: JINDAL/ AJIT INDIA/ HINDALCO]

S&F stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples complete all as specified and directed.

S&F Sheet glass 3mm thick, ordinary quality and glazing with oil putty in squares not exceeding 0.5Sqm in each pane complete all as specified and directed.

M&L for Cement concrete 1:4:8 type D-2 using 40mm graded stone aggregate in foundations, filling and mass concrete complete all as specified and directed.

M&L for Brick work with fly ash bricks (Modular), straight or curved on plan exceeding 6m mean radius, built in cement mortar 1:6 complete all as specified and directed.

M&L for Walling of random rubble, uncoursed, well bonded, bedded and solidly hearted, built in cement mortar 1:6 complete all as specified and directed.

M&L for rendering 10mm thick in cement mortar 1: 6 on faces of brick work or concrete surfaces, finished even and smooth without using extra cement complete all as specified and directed.

M&L for rendering 15mm thick in two coat, first coat of 10 mm in CM 1:4 and second coat of 5 mm thick in cm 1:4 mixed with water proofing compound on faces of brick or concrete surfaces and finishing even and smooth complete all as specified and directed. Note : water proofing compound shall be measured and paid seperately.

Supply Integral water profing compound, complete all as specified and directed.

M&L for Machine cut Kota stone slab flooring 20-25mm thick (size not less than 450mm x 600mm) with and including 20mm thick cement screed base in CM 1:3, laid and jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and mirror polishing complete all as specified and directed.

M&L for Kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar, etc with and including 10mm thick rendering in CM 1:3 and jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and mirror polishing complete all as specified and directed.

M&L for Cement concrete 1:2:4 type B1 using 20mm graded stone aggregate in floors, 25mm thick, laid in panels and finished even & smooth without using extra cement complete all as specified and directed.

M&L for Cement concrete 1:3:6 type C2 using 40mm graded stone aggregate in plinth protection, 75mm thick, finished even and smooth without using extra cement, including making joints 12mm wide to the full depth of PCC at every 3 metres and at every change of direction and filling the same with & including bitumen and sand 1:3 by weight complete all as specified and directed.

S&F Mild steel TMT bars 10mm dia and over as reinforcement for concrete, cut to length, bent to shape required, including cranking, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia complete all as specified and directed.

S&F Mild steel TMT bars 6 to 8mm dia as reinforcement for concrete, cut to length, bent to shape required, including cranking, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia complete all as specified and directed.

S&F Mild steel TMT bars 5mm dia and over upto and including 10mm dia as stirrups, cut to length, bent to shape required, including cranking, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia complete all as specified and directed.

M&L for Reinforced cement concrete design mix M-25 in foundations, footing, plinth beams, bases for columns and mass concrete complete all as specified and directed.

M&L for Reinforced cement concrete design mix M-25 in columns, pillars, posts & struts complete all as specified and directed.

M&L for Reinforced cement concrete design mix M-25 in slabs supported on walls, beams & columns complete all as specified and directed.

M&L for Reinforced cement concrete design mix M-25 in lintels over 1.5m clear span, beams and cantilevers complete all as specified and directed.

Use and waste of formwork to sides of concrete foundations, footings, columns, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter with rough finished surface, complete all as specified and directed.

Use and waste of formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc.with rough finished surface, complete all as specified and directed.

Use and waste of formwork to edges of rough finished surfaces of concrete flats,treads,breaksin floors,window cills,concerte railings,opening in concrete walls,floors and roof n exc 20 cm wide and side of RCC /PCC bands in walls,horizontal or sloping and similar work exc 10 cm but n exc 20 cm wide, complete all as specified and directed.

M&L for 18-20 mm thick granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including grinding, moulding and including 15mm thick screed bed in CM 1:4 complete all as specified and directed.

Preparation of newly plastered surface of wall and M&L for applying three coats of white wash complete all as specified and directed.

Preparing new plastered or unplastered surfaces of wall and M&L for applying two coats of distemper oil emulsion, white or tinted over a coat of primer and including 3mm thick wall care putty (Make: Birla/JK) on plastered surfaces complete all as specified and directed.

Preparing new plastered or unplastered surfaces of wall and M&L for applying two coats of exterior acrylic emulsion paint, white or tinted over and including a coat of exterior wall primer on plastered surfaces complete all as specified and directed. [Make :Shalimar(Saktiman) / Asian(ACE) / Burger(wall masta)]

M&L for Preparing new or previously untreated steel & iron surfaces of any description over 10cm in width or girth and applying two coats of synthetic enamel paint over & including a coat of red oxide zinc chrome primer complete all as specified and directed.

M&L for preparing old painted surfaces of wood and wood based materials of any description over 10cm in width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

M&L for Providing cement concrete 1:2:4 type B-1 using 20mm graded stone aggregate in cills, seismic and other similar bands, plinth courses, copings, bed plates, bond stones, etc including weathering, slightly rounded or chamfered angles and throating as directed including necessary form work complete all as specified and directed.

M&L for provn of water proofing roof treatment to accessible RCC roof with APP modified membrane with non woven polyster reinforced wt not less than 3 Kg/SqM of thickness not less than 3 mm having thermal; insulation with white mineral/ gravel finish on upper side of membrane uniformely embedded during manufacturing process. All as per following specifications: (a) 10 mm thick plaster in CM 1:4 mixed with and incl water profofing compound @3% by weight of cement applied over roof slab. After the plaster is cured the roof will be tested for water tightening by ponding with water for seven days for any seepage / leakages etc. if any seepage is oberved the rectification will be carried out by pressure grouting under the pressure of 5 Kg/Sqcm using cement based cement grout. After the surface is repired the slab will be tested for watertightness aginst before processing further treatments. (b) The surface of the roof, parapet and gutters, drain mouths etc. over which water profing treatment is to be applied shall be cleaned of all foreign matters such as fungus, mass, dust etc. by wire brushing and dusting. For cast iron drain outlets the grove shall be cut around to tuck in the treatment as pipes, chimneystacs etc. and other similar situations to ease up about corners. (c) Bituminous primer conforming to IS : 3384-1965 @ 0.30 Kg/Sqm to be applied an prepared surface till the surface is properly impregnated. (d) APP modified water proofing membrene as specified shall be laid on the primer surface by torch application method as per manufacturers instructions, The overlaps while torching shall be 100 mm in both directions(longititudinal and transverse directions). All overlap joints shall be sealed throughly by thermofusing both the membrene layers and sealing it with the help of hot trowel. The overlap joints shall be made as monolithic layer. (e) All joints & changes in direction should be curved with cement motor 1:3 mixed with SBR latex @ 200 ml per beg of cement and cured well before laying the membrane. (f) A fillet of PCC (1:2:4) type B-0 of 100 mm x 100 mm shall be provided at all junctions of vertical and horizontal surfaces and whereever ther is a change of direction. The membrane should not be taken over at any steep turns and hence all corners /junctions should be rounded.

M&L for grouting by pressure injection with cement slurry of 50kg cement mixed with Pidicrete SM @ 225 gms of M/S pidilite industries ltd or Cobex 100 of M/S Fosroc Chemicals as per instructions complete all as specified and directed.

M&L for 40mm cement concrete type B-0, 1:2:4 ( using12.5mm gradded stone aggregate) as in DPC complete all as specified and directed.

M&L for Non skid ceramic coloured tiles 7mm to 8mm thick, joints free (square/ rectangular), area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors, etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match tiles with & including 15mm thick screed bed in CM 1:4 complete all as specified and directed. [MAKE: SOMANY/KAJARIA /JOHNSON/ORIENT]

M&L for Glazed ceramic coloured tiles 350mm x 250mm x 7mm thick or 450mm x 350mm x 7mm thick, in vertical surfaces such as skirting, dados and risers to steps, etc set and jointed in neat cement slurry and pointed in white or coloured cement to match tiles with & including 10mm thick rendering in CM 1:3 complete all as specified and directed. [MAKE: SOMANY/ KAJARIA/ ORIENT/ JOHNSON]

S&F PVC low level flushing cistern 10 litres capacity, ISI marked, white, with all fitting and fixtures including brackets, PVC connection of 450mm long and 32 mm bore PVC flush pipe, complete all as specified and directed. [MAKE:- SOMANY (Cat No.121002), Prayag (Cat No.501 Smart flush cistern) or equivalent in PARRYWARE-SLIMLINE/CERA as approved by GE]

S&F Vitreous china squatting pan ‘Orissa’ pattern, size 580 x 440 mm, white with integral foot rests including provision of cement concrete bedding & ‘P’ or ‘S’ trap complete all as specified and directed. [MAKE:-SOMANY (Cat.No.121115), PRAYAG (Cat No.4055) or equivalent in CERA/PARRYWARE/ HINDWARE as approved by GE.]

S&F Vitreous china urinal half stall ISI marked, white, with & including chromium plated waste coupling including connections to flush pipe and outgoing pipes complete all as specified and directed. [MAKE:-SOMANY smart / HINDWARE (Cat No.60002 starwhite) or equivalent in CERA/PARRYWARE as approved by GE.]

S&F Vitreous china wash basin, ISI marked, white, flat back, size 550 x 400mm, including CP waste coupling, 32mm dia PVC waste pipe of suitable length, brackets and cutting for and pinning in ends of brackets, complete all as specified and directed. [MAKE:-SOMANY (Cat No.110107) or equivalent in CERA/PARRYWARE /HINDWARE as approved by GE.]

S&F Factory made solid PVC door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube complete all as specified and directed.

S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail. Panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, complete all as specified and directed. [MAKE:-RAJSHRI PLASTIWOOD/ M/s SINTEX INDUSTRIES/ M/s POLY WINDOWS / M/s DURA PLAST/ M/s ACCUCELL]

S&F Steel water tubes, medium grade, ISI marked, galvanised 15mm bore with all fittings, fixed to walls and ceiling or laid in floors complete all as specified and directed.

S&F Steel water tubes, medium grade, ISI marked, galvanised 20mm bore with all fittings, fixed to walls and ceiling or laid in floors complete all as specified and directed.

S&F in repairs PVC connections 15 mm size with PTMT nuts of length 450 mm complete all as specified and directed.

S&F PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement complete all as specified and directed.

M&L PVC (SWR) 75 mm outlet floor trap, plain with grating including jointing with solvent cement complete all as specified and directed.

S&F Bib taps cast copper alloy chromium plated with crutch or butterfly handle, fancy type, screwed down, screwed for iron pipe or for brass ferrule 15mm bore complete all as specified and directed. [MAKE:- Prayag (Cat No.8606) or equivalent in JAGUAR/MARC as approved by GE]

SS&F Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered ‘Hot’ or ‘Cold’ with long screwed shanks and fly nuts, screwed for iron pipe 15mm bore complete all as specified and directed. [MAKE:- Prayag (Cat No.8602) or equivalent in JAGUAR/MARC as approve by GE]

S&F in repairs Stop valves, cast copper alloy, screwed down, high pressure, with crutch or butter fly handle, fancy type, chromium plated, with long shank and cup (angle type) screwed both ends for iron pipe or for unions 15mm bore, complete all as specified and directed. [MAKE:- Prayag (Cat No.8610) or equivalent in JAGUAR/MARC as approved by GE]

S&F PVC (SWR) pipes, single socketed, in any length with rubber ring joints, laid in trenches, floors or fixed to walls, 75 mm bore complete all as specified and directed.

S&F PVC (SWR) pipes, single socketed, in any length with rubber ring joints, laid in trenches, floors or fixed to walls, 110 mm bore complete all as specified and directed.

S&F PVC (SWR) bends any radius, 75 mm bore complete all as specified and directed.

S&F PVC (SWR) bends any radius, 110 mm bore complete all as specified and directed.

S&F PVC (SWR) junction single (single T), equal or unequal, 75mm bore complete all as specified and directed.

S&F PVC (SWR) junction single (single T), equal or unequal, 110mm bore complete all as specified and directed.

S&F PVC (SWR) vent cowl, 110mm bore complete all as specified and directed.

M&L concrete bed of PCC 1:4:8 type D2 using 40 mm graded stone aggregate for drain pipes bedding & hunching complete after pipes are laid, jointed and tested complete as specified

S&F reinforced concrete pipes, class NP2, 200 mm bore, laid and jointed with collars complete all as specified and directed.

M&L for cutting into existing manholes for connecting new sewage line 200 mm bore incl makind good to disturbed benching and haunching, plaster etc and forming new branch channel ( ½ round of ¾ section) if required in cement concrete 1:2:4 type B1 and smooth finished , reforming benching as required complete all as specified and directed. (Note : Each Man hole shall be measured under this item )

S&F tubular towel rail of aluminium anodised, 20mm dia, D type, 60cm long between flanges complete all as specified and directed. [MAKE:- Prayag (Cat No.BA-40) or equivalent in JAQUAR/MARC as approved by GE]

S&F chromium plated shower rose 125 mm size with swivel joints complete all as specified and directed. [MAKE:- Prayag (Cat No.BS-76) or equivalent in JAGUAR/CERA as approve by GE]

M&L for concealed point wiring for one light/fan/bell point with 1.50 sqmm (nominal area), FRLS PVC insulated, unsheathed, single core multi-stranded copper conductor cable, 1100 volts grade, ISI marked controlled by one one-way switch, drawn through and including concealed medium grade PVC conduit not less than 20 mm dia, ISI marked, with all accessories (PVC casing and capping of size 25 mm , ISI marked with complete accessories to be used wherever wiring to be run on ceilings and concrete surfaces) including one run of 1.5 sqmm FRLS muti-stranded copper conductor (green colour cable) as earth continuity wire connected to common earth dolly, including sunk sheet steel terminal box made out of 1.20 mm thick and not less than 60 mm in depth GI/MS/ pressed steel terminal box to be concealed in wall, duly painted with two coats of anti corrosive black bituminous paint over a coat of red oxide primer in and out sides and two coated of aluminium paint on internal surface , including laminated hylum sheet cover, ISI marked for mounting of fittings like switches, sockets, fan regulators, etc. fixed with galvanised screw and cup washer complete all as specified and directed. Note : (i) Wiring to be done as per approved colour code in IE rule.(ii) Rate includes chase cutting for concealed wiring. [Make of Cable : Polycab/ Plaza/ Havells]

All as per BOQ item No.78.00 here-in-before, but for one 5 Amps socket outlet point controlled by one switch on independent board with other switches complete all as specified and directed.

All as per BOQ item No.78.00 here-in-before, but for one 5 Amps socket outlet point controlled by one switch on same board with other switches complete all as specified and directed.

All as per BOQ item No.78.00 here-in-before, but wiring with 2.5 Sq mm copper cable for 5/15 amp switch socket combination on or 3 pin socket out let 15 amp independent board and provision of 1.5 Sqmm, FRLS insulated multi-stranded single core earth wire for earth continuity, connected to common earth dolly complete all as specified and directed.

S&F Switch piano, flush type 6 Amps single pole, one way, 1 module complete all as specified and directed. (Make:- Legrand (Cat. No.573400) or equivalent in Anchor ROMA DEKO 'D' series / Crabtree)

S&F Switch socket combination, multipurpose, 6 pin, 5-15 Amp, flush type, ISI marked complete all as specified and as directed. [MAKE:-ANCHOR/LEADER/CONA as approved by GE]

S&F Socket outlet multipurpose having provision for 3 pin, 5 Amp and 2 pin, 5 Amp, piano flush type, 230 volt AC complete all as specified and as directed. [MAKE:-ANCHOR/LEADER/CONA as approved by GE]

S&F Ceiling rose surface bakelite, three terminals complete all as specified and as directed. [MAKE:-ANCHOR/LEADER/CONA as approved by GE]

M&L Factory made sheet metal Enclosure (IP-42) factory prewired concealed flush in wall for MCB's, double door designed surface /flush mounted DB's SPN 230V 4 Way with 200 Amp rated Bus bar fixed on wall /MS Box complete with copper bus bar neutral Link dinrail suitable for mounting MCBs complete all as specified and directed

S &F MCB B Curve type SPN 32 Amps 240volts, complete all as specified and directed. [MAKE:Hegar (L&T)/ Siemens/ Legrand/HAVELLS as approved by GE]

S&F Single Pole 6 to 32 Amp MCB's , 'B' Curve type , repturing capacity 10 KA, complete all as specified and directed. [MAKE:Hegar (L&T)/ Siemens/ Legrand/HAVELLS as approved by GE]

S&F lamp holder, PVC/polycarbonate type with back plate suitable for batten fittings complete all as specified and directed. [MAKE FOR HOLDER:-ANCHOR /LEADER/CONA all as approved by GE]

S&F LED lamp 10 W B-22 holder base complete all as specified and directed. [MAKE : BAJAJ/PHILIPS/SYSKA all as approved by GE]

M&L for bracket made out of GI tubing 40mm dia,light grade 1.5 mtr long including fixing with MS clamps -2 Nos made out of 50 mm wide 5mm thick flat iron with M.S nuts bolts 75 mm long 12 mm dia -4 Nos with flat washer (3mm thick) -02 No for each including painting with aluminium paint over one coat of red oxide to the M.S clamps & bracket etc complete.including 1.sqmm, 3 core flexible Copper cable from juction box to connecter of street light fitting, complete all as specified and directed.

S&F LED security Street light fitting 30 Watt LED streetlight with pressure die cast housing with individual LEDs with modular secondary optics and IP65 protection all as specified & directed. Make : Cat Part No-BRLEP 30 W LED WH of Bajaj or equvalent in PHILIPS/SYSKA/CG

S & F LED security Street light fitting 20 Watt LED streetlight with pressure die cast housing with individual LEDs with modular secondary optics and IP65 protection all as specified & directed. Make : Cat Part No-BRLEP 20 W LED V2 of Bajaj or equvalent in PHILIPS/SYSKA/CG

M&L for sub main wiring with approved colour coding as per IS (Red, Black and Green for single phase circuits) with two single core PVC insulated FRLS cable 1100V unsheathed with stranded copper conductor of 4.0 sqmm nominal cross section area and drawing into rigid non metallic PVC conduit, ISI marked, medium grade, inclusive of all fittings such as tees, bends, junction boxes, elbows, saddles, pipe hooks, couples, lock outs, etc. 20mm external diameter and PVC insulated stranded copper conductor of 4.0 sqmm nominal cross section area as earth wire including taking down old unserviceable sub main wiring complete all as specified and directed. [Make of Cable : Polycab/ Plaza/ Havells/KEI/V-MARC as approved by GE]Note : (i) Wiring to be done as per approved colour code in IE rule. (ii) Two runs of 4.0 sqmm cable, one run of 4.0 sqmm cable of earth continuity conductor & PVC conduit pipe shall be measured as one unit length.

Supply and Laying cable XLPE Insulated screened PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 16 Sqmm 2 core, complete all as specified and directed. [MAKE:- POLYCAB /HAVELLS INDIA LTD/ KEI]

Supply & Laying or fixing or passing through pipe,1100 Volts grade heavy duty cable with PVC insulated Al solid conductor served with an inner sheathing of PVC tape armoured with Galvanised steel wire or tap and overall PVC sheathed 2 core 6 Sqmm nominal cross section in service connections & it also including all clamps etc all as directed and specified. [MAKE:- POLYCAB /HAVELLS INDIA LTD/ KEI]

M&L for Earthing complete with galvanized steel earth plate electrode 600 x 600 x 6 mm thick buried directly in ground (earth pit not less than 2.25 metre deep below ground level) with top edge of plate not less than 1.5 metre below normal ground level connected to galvanized earth lead wire 4 mm dia by means of bolts, nuts, check nuts and washers of galvanized iron or steel all as shown in electrical Plate No 3 of MES SSR-2009 Part-I connected to main switch board or main control board all as specified and testing on completion including provision of earth wire protected by 15mm dia light grade GI pipe and watering pipe shall be 20mm bore light grade including all excavation and earth work in any type of soil, PCC pit with pre-cast RCC cover, charcoal/salt, funnel etc complete all as directed. NOTE :-(i) The concrete pit shall be PCC (1:3:6) type C-1, 40 mm thick pre cast cover slab of RCC (1:2:4) type B-1 using 20mm graded stone aggregate reinforced with 8mm TMT bars @ 10 cm C/C on both sides with suitable cast iron handle shall be provided in lieu of cast iron cover shown in electrical plate No 3 of MES SSR Part-I. (ii) The unit rate includes the cost of GI pipe medium grade for protection of earth wire and 4mm dia earh lead wire upto 7.5 M. (iii) PCC pit shall be provided at least 500 mm away from the pit and not on the earth pit itself.

S&F LED Light fitting 1X18 Watt Endural LED batten is a reliable with acrylic cover,LED Tube light with all accessories including connection up to three core twisted flexible copper conductor cable with suitable size & all as specified & directed. Make : Cat Part No-BCLSB 18 WH of Bajaj or equvalent in PHILIPS/SYSKA/CG

S&F LED Mirror Light fitting 1X5 Watt Endural LED batten is a reliable with acrylic cover,LED Tube light with all accessories including connection up to three core twisted flexible copper conductor cable with suitable size & all as specified & directed. Make : Cat Part No-BCLSB 05 WH of Bajaj or equvalent in PHILIPS/SYSKA/CG

M&L for sand filling with clean dry fine sand unwashed including gently punning around cables in trenches for cable protection (8 cm below cable & 15 cm above cable) complete all as specified and directed. [Note:-Compacted/punned thickness shall be measured & paid]

Supplying and laying sub class 'B' bricks (modular) for cable protection cover laid flat and dry in trenches over the cable perpendicular to the direction of cable complete all as specified and directed

Supply, fixing verticle storage water heater (Geyser), 240V, AC, Single phase,50 Hz of 25 ltrs capacity, with heating element of 2.0 KW, stainless steel tank, 5 star rating, with indicator lamps for thermostat operation, with max rated pressure 8 bar, fixing to wall by means of dash fashner of min 80 mm long ( Vertical wall mounting), including S&F, connecting with cold and hot water pipe lines, heavy grade, of size 15 mm x 450 mm length with rubber washer , making complete connection and testing of geyser for its staisfactory functioning complete all as specified & directed. Make of Geyser: Bajaj/Racold/Havells.

S&F sheet metal earth plug & socket, single pole and neutral with and including 1no. single pole MCB 10 Amps 240 volts complete all as specified and directed. [Make:-Legrand Cat No. 607841 or equivalent in Crabtree/HAVELLS as approved by GE]

S&F exhaust fan 300 mm sweep, metal body, complete with louvers incl all civil work like cutting and making circular opening in existing wall of kitchen etc. incl connecting up with twin core twisted flexible copper conductor cable with suitable size complete all as specified & directed. Make-CG/Bajaj/Havells

S & F Ceiling fan AC single phase 230/240 V of size 1200 mm sweep incl connecting up with twin core twisted flexible copper conductor cable with suitable size complete all as specified & directed. Make-CG/Bajaj/Havells

S&F Rotational moulded (three layered, ISI marked) polyethylene water storage tanks (cylindrical vertical with closed top) of 500 litres capacity including PVC cover, hoisted and fixed in position including connecting up pipes complete all as specified and directed. [MAKE:-SINTEX/ POLYWELL/ POLYCON/POLYPLAST]

S&F Rotational moulded (three layered, ISI marked) polyethylene water storage tanks (cylindrical vertical with closed top) of 1000 litres capacity including PVC cover, hoisted and fixed in position including connecting up pipes complete all as specified and directed. [MAKE:-SINTEX/ POLYWELL/ POLYCON/POLYPLAST]

S&F Steel water tubes, medium grade, ISI marked, galvanised, 40 mm bore with all fittings, fixed to walls and ceiling or laid in floors complete all as specified and directed. [MAKE: TATA/ SURYA/ JINDAL/ PRAKASH]

Supply & fixing Gun-metal globe or gate valve 40 mm bore with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified & directed.

Supply & fixing Gun-metal globe or gate valve 20 mm bore with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified & directed.

S&F PVC float valve high pressure of PTMT with epoxy coated aluminium rod & hight density plastic ball 20 mm size complete screwed for iron pipe or brass furred and fixed with fittings such as (socket, nipple, union) etc Make : Prayag/Polytuf

S&F Desert cooler having air delivery of min capacity 4000 cum per hrs, PVC body, min water tank capacity 45 ltrs, side high efficiency plastic fan with dust filter, mosquit net, cool flow despenser, Auto lover movement , dura pump technology, single phase , 40V, 50 Hz, (Excluding elect connection) including moveble wheel complete all as specified & directed. Make :- Symphony/Bajaj/CG

M/S RAKESH TRADERS

MS Soumya consultants and designers

SATHI ENTERPRISES