COMPREHENSIVE MAINTENANCE TO THI AEPTA MES IB HQ SOA UNDER AOR OF AGE B/R CENTRAL GE DEOLALI

Amount

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed

M & L Vitrified ceramic tiles (light shade) 8 to 10mm thick (square/rectangular) area of each tile not exceeding 0.36 sqm, in floors etc. with and including 15mm thick screed bed in CM 1:6 ,set and jointed in neat cement slurry and pointed in white or coloured cement to match etc complete all as directed.

Ditto all as above but in skirting over 8-10mm thick backing coat in CM 1:4 complete all as specified and directed

M & L for coloured designer tiles exterior grade area of each tile from size not more than 0.36 sqm ( ENDURA OR Equivalent ) 15 mm thick over and including 15 mm thick cement mortor 1:6 set and jointed in floor and pointed in neat cement slurry with grey cement and pigment in floor etc. all as directed by Engr-incharge.

M&L for Double charged/GVT Vitrified tiles 8-10mm thick (square/rectangular) polished, area of each tiles exceeding 0.42 sqm but not exceeding 1.00 sqm, in floors including screed bed 15mm thick in Cm 1:6 etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

Ditto all as above but in skirting over 8-10mm thick backing coat in CM 1:4 complete all as specified and directed

M & L for joint free non skid ceramic tiles of size 7 to 8mm thick (coloured) (Square/rectangular) area of each tile exc 0.06 but n exc 0.11 sqm, in floors, set & jointed in neat cement slurry and pointed in coloured cement over and including 15mm screed in CM 1:6 or with chemical cement to match all as directed.

M&L for joint free coloured glazed ceramic tiles in vertical surface of size 300X 600X 7mm thick of different shade colour and pattern as approved, over and including 10 mm thick rendering in CM 1:4 as backing coat finished to receive wall tiles, set and jointed in neat cement slurry and pointed in white or colour cement to match etc complete all as directed and specified.

M&L for joint free coloured glazed ceramic tiles in vertical surface of size 300X 450X 7mm thick of different shade colour and pattern as approved, over and including 10 mm thick rendering in CM 1:4 as backing coat finished to receive wall tiles, set and jointed in neat cement slurry and pointed in white or colour cement to match etc complete all as directed and specified.

Demolition of cement concrete (unreinforced) in ground floors and paving n exc. 15cm thickness (below or above ground level) complete all as specified and directed

M&L for cement concrete 1:2:4 type B-1, using 20mm graded stone aggregate as in coping, bed blocks, filling of hold fast PCC or similar works including formwork complete all as specified and directed.

M&L for PCC 1:4:8 type D-2 (using 40mm graded stone aggregate ) as in subase finished to receive floor treatment etc complete all as directed.

M & L for chequered cement concrete tiles rubber moulded , 30cm x 30cm x 25mm thick confirm to IS 13801-1993 , set jointed & pointed in neat cement slurry with grey cement and pigment in floors incl Screed bed or bedding layer of mortar 15 mm thick in CM 1:6 for laying floor finishes complete all as specified and directed

S&L machine pressed precast concrete interlocking paver block rubber moulded, any shape and size confirming ti IS-15658-2006 of 60mm thickness grey cement and with pigment , M-35 grade incl 30mm thick Sand filling to under interlocking tiles complete all as specified and directed.

Demolition of stone slabs, paving stones and tiles of any description and thickness in floors, aprons, laid, bedded and pointed in any mortar complete all as specified and directed.

M & L for Machine cut cudappah stone slab 20-25mm thick over cement screed base, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete including rubbing and polishing complete all as specified.

M & L for 16-18mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite. including Screed bed or bedding layer of mortar 20 mm thick for laying floor finishes complete all as specified.

M & L for 15 mm thick Artificial Granite (of any type and colour ) work steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite. including Screed bed or bedding layer of mortar 20 mm thick for laying floor finishes complete all as specified.

Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations complete all as specified and as directed.

Demolition wall and ceiling boards (fibre, pulp, insulation, etc) or insulation boards / slabs / blankets, any thickness, including cover fillets all as specified and directed.

M&L for providing & fixing in repair false ceiling of Designer tile Ivory painted (High Pressure Steam cured) of 4mm thickness (as per IS : 14862) of size 595x595mm and any one of the design (Cascade or electra) fixed or laid/ inserted to timber/GI/Aluminium framework with screws in true horizental level, suspended on inter locking metal grid of hot dipped galvanised steel section (Galvanised @120 grms, both side inclusive and black painted groove on all T webs) consisting of main T runner with suitably spaced joints to get required length and 15x32mm made from 0.30mm thick sheet spaced at 1200mm c/c and croos 'T' of size 15x32mm made of 0.30mm sheet 1200mm long spaced between main "T" at 600 mm c/c to form a grid of 1200x600mm and secondary cross "T" of length 600mm and size 15x32 mm made of 0.30mm thick sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24x22x0.40mm and laying false ceiling tiles in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main "T" runners to be suspended from ceiling using GI soffit cleats fixed to existing RCC lintel with dash fasteners, GI adjustable wire of 2mm dia with galvanised butterfly level clips, spaced at 1200mm c/c along main 'T', bottom exposed width of 15mm of all 'T'' sections of 2 mm dia GI wire shall be pre-painted with polyester paint and black painted groove at center of size 4mm depth and 4.5mm width, including taking down existing ceiling of any type all complete at all heights as per direction of Engineer-in-Charge. Make: Everest/ Armsrong or equivelent

S&F for powder coated aluminum alloy interlocking snap grid 600mm x 600mm consists of Main Tee runners of size 38mm x 25mm x 1.5mm and cross Tee of size 25mm x 25mm x 1.5mm, spaced between the main Tee at 600mm centre to centre to form a grid of 600mm x 600mm and wall angle 25mm x 25mm x 2mm fixed to wall perimetrs at 450mm centres and shall conform to IS 733, IS 1285 with and including hangers of 3mm dia. G.I. (upto 1200mm length and 1200mm centres) adjusting level fixed to roof steel members by means of ceilling cleats made out of G.I. flat 40X3 mm size 60mm long etc complete all as specified and directed .

M&L for 4mm thick non asbestos fibre cement building boards of make 'E Board classic designer board (Cascade or Occenic) of M/S Everest industries Ltd or equivalent as approved, fixed or laid/ inserted to timber/GI/Aluminium framework complete all as specified and directed .

Providing and fixing Gypsum Board false ceiling 10mm thick fixed with screw including GI frame work of section 40x60mmx1.25mm and as per manufacturers instructions

S&F Solid PVC Wall Lining consisting of 5mm thick wood grain printed PVC sheet used instead of plain colour sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing

S&F 5mm thick PVC sheet fillet width 35mm for wall paneling inclusive of fixing on to wall to make PVC frame as per specification and drawing.

S&F 5 to 8 mm thick interlocking PVC hollow false ceiling/wall panelling fixed with self tapping screw over and including aluminium hollow SECTION 40MMX40MM and hanging wire of approved colour and design complete all as specified as per manufacturerer instruction and directed by Engr-in-Charge Make:- Placopan/ Sintex/ RAJSHREE

Taking down chowkats or frames with shutters (without taking off shutters from the frames) n exc 1.5 sq. m each complete all as specified and directed.

Taking down chowkats or frames with shutters (without taking off shutters from the frames) exc 1.5 sq. m but n exc 4 sq m each complete all as specified and directed.

Taking down Shutters of any description exc 1 Sqm but not exc 2 Sqm each complete all as specified and directed

S&F 2nd class wood glazed & skeleton shutter 35mm thick factory made open rebated & prepared to receive glass gauze etc (without sash bars) edges of framing plain, chamfered or rounded, fitted with cut and mitered beads for securing glass,gauge etc size of members of shutter as specified in SSR part-I , section 8, clause 8.24 (a) including complete all as specified and as directed.

S&F stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire stapples complete all as specified and directed.

S&F Wire netting of stainless steel wire 1.4mm dia fixed with tinned tacks of stainless steel wire staples Size of mesh in 20 mm mm complete all as specified and directed.

Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 65 x100 mm single rebate comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made Make : ECHON/Sintex/Rajshree/Navaratan

All as per item No 34 above but of frame size 65x 125 mm double rebate

S&F 28-30 mm thick Prelaminated moulded WPC factory made 100% solid door (conforming as per IS-4020) made from 100% lead free single extruded with 2, 4 or 6 raised panel design on the front side with 10 mm deep mould on both side with wood grain texture with density not less than 650 Kg/cum. Manufactured by an ISO : 9001-2015 certified company. The door should be water proof, termite proof, fire etardant and having screw holding capacity complete all as specified

S&F 28-30 mm thick Prelaminated Flush WPC factory made 100% solid door (conforming as per IS-4020) made from 100% lead free single extruded side with wood grain texture with density not less than 650 Kg/cum. Manufactured by an ISO : 9001-2015 certified company. The door should be water proof, termite proof, fire etardant and having screw holding capacity complete all as specified

S&F 28-30 mm thick Prelaminated WPC factory made 100% Sketon/Glased door (conforming as per IS-4020) made from 100% lead free single extruded on both side with wood grain texture and with density not less than 650 Kg/cum. Manufactured by an ISO : 9001-2015 certified company. The door should be water proof, termite proof, fire etardant and having screw holding capacity complete all as specified

S&F 30mm thick flush door shutters solid core construction with block board core and plywood face panels commercial type on both sides etc complete all as specified and directed.

M&L for preparation of New untreated wooden surfaces of any description, not otherwise, described, over 10cm width or girth and painting with two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed.

S & F powder coated aluminium sections for doors, partition including fabrication of frame and fixing with necessary with one or more rebates including joining cleat for fixing etc. complete all as specified and directed.

S & F powder coated aluminium door shutters,aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges,anodised aluminum snap beading screws etc. complete all as specified complete all as specified by Engr-In- Charge. Note : (i) Glass panes/wire cloth will be measured & paid separately . (ii)The quoted rate shall be inclusive of cost of rubber beading and glazing clips,hinges, handle. However it will be not be weighed and not paid separately. (iii) All other minor details including cost of locking arrangement shall be included in the quoted rate. Make : Hindalco/Indal (Indian Al Coy)/Jindal/Associated Profile & Aluminium Ltd/Ajit India

S & F bombay sliding powder coated aluminium three track sliding windows, including fabrication of frame size 94mmx 34mmx1.50mm and three track shutters frame size 40mmx 18mmx18mm( two glass shutters and one wiremesh shutter) and fixing with necessary lugs, cleats, rollers, handles, locking arrangement etc. including all accessories such as glazings clips, provn of AC opening and rubber beadings for fixing glass panes in frame complete all as specified by Engr-In- Charge. Note : (i) the quoted rate shall be inclusive of cost of Glass panes/wire cloth will not be measured not paid separately . (ii)The quoted rate shall be inclusive of cost of rubber beading and glazing clips,hinges, handle. However it will be not be weighed and not paid separately. (iii) All other minor details including cost of locking arrangement shall be included in the quoted rate. Make : Hindalco/Indal (Indian Al Coy)/Jindal/Associated Profile & Aluminium Ltd/Ajit India

S&F for powder coated aluminium ventilator shutters with frame not less than 0.35 Kg/Rm, half bottom portion fixed with 4mm thick glass with fixed type shutter and top half portion lower type with 4mm thick glass and outer side fixed with stainless steel wire mesh, shutters aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, necessary aluminium fittings etc complete all as specified and directed.

S&F 4.00 mm disigner tinted glass thick area exc 0.50 Sqm in each pane with etching of approved design complete all as specified and directed

S & F 4.00 mm thick sheet glass area not exc 0.50 Sqm fixed in Door shutters shutters etc complete all as directed.

S&F Framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forget into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 410-0 or Fe 310-0 all as specified and as directed.

S&F in repair factory made 100 % Prelaminated solid wood plastic composite (WPC) flush type shutter of 18mm thickness one side laminate consisting of panel of PVC profile of 18mm (+ 0.7mm) thick of denisity 600 kg per cum manufactured by ISO-9000 certified company using for shutter cillicia ply 18mm thick and fixed with frame. The thickness of shutter is edges painted by matching colour of PVC lining of plain/prelim coloured PVC sheet using etc complete as per manufacture specification. Make : ECHON/Sintex/Rajshree/Navratan

S&F in repair factory made 100 % plain solid wood plastic composite (WPC) flush type shutter of 18mm thickness consisting of panel of PVC profile of 18mm (+ 0.7mm) thick of denisity 600 kg per cum manufactured by ISO-9000 certified company using for shutter cillicia ply 18mm thick and fixed with frame. The thickness of shutter is edges painted by matching colour of PVC lining of plain/prelim coloured PVC sheet using etc complete as per manufacture specification.Make : ECHON/Sintex/Rajshree/Navratan

S&F auto soft closing hinges 35 mm of 0 crank( KH-001) OR 8 crank (KH-002) openable at 110 degree for kitchen cabinet shutters Make :Hexa, Hettich, Hafele

S&F Ball bearing runners 450 mm Telescopic channel (KTS-20) full extension load capacity 50 kgs, Make :Hexa, Hettich, Hafele

S&F chrome plated stainless steel wire basket with border of 5mm dia and inner grill 3mm dia of wire (storage basket) pull out type for large utensils, size 480 x 500 x 150 mm of Grade 304 with necessary fixing clips etc. including Stainless staging work for basket of SS grade 304 Sq pipe pipe 20x20 & 1mm thick complete all as specified and as directed by engineer- in – charge.

S&F chrome plated stainless steel wire basket with border of 5mm dia and inner grill 3mm dia of wire (cup and saucer basket) pull out type, size 380 x 500 x 100 mm Grade 304 with necessary fixing clips etc. including Stainless staging work for basket of SS grade 304 Sq pipe pipe 20x20 & 1mm thick complete in all respect as specified and as directed by engineer- in – charge

S&F chrome plated stainless steel wire basket (plate basket) pull out type, size 380 x 500 x 100 mm Grade 304 with necessary fixing clips etc. including Stainless staging work for basket of SS grade 304 Sq pipe pipe 20x20 & 1mm thick complete in all respect as specified and as directed by engineer- in – charge.

S&F chrome plated stainless steel wire basket with border of 5mm dia and inner grill of 3mm dia of wire (cutlery basket) pull out type, size 380 x 500 x 100 mm Grade 304 with necessary fixing clips etc. including Stainless staging work for basket of SS grade 304 Sq pipe pipe 20x20 & 1mm thick complete in all respect as specified and as directed by engineer- in – charge.

S&F chrome plated stainless steel wire basket with border of 5mm dia and inner grill of 3mm dia of wire (Grain Trolley) pull out type, size 480 x 500 x 200 mm Grade 304 with necessary sliding frame structure, fixing clips etc. including Stainless staging work for basket of SS grade 304 Sq pipe pipe 20x20 & 1mm thickcomplete in all respect as specified and as directed by engineer- in - charge.

Supply chrome plated stainless steel wire basket with border of 5mm dia and inner grill of 3mm dia of wire (Bottle pull out) pull out type two self, size 120 x 500 x 432 mm with necessary sliding frame structure, fixing clips etc. including Stainless staging work for basket of SS grade 304 Sq pipe pipe 20x20 & 1mm thick complete in all respect as specified and as directed by engineer- in – charge.”

S&F width of flaps (When open) in 40 mm continuous (piano) hinges, mild steel, bright finish or electrogalvanised.

S&F Hasp and staple, safety type, MS with powder coated mild steel hinge pin including bolt to hinge plate and fixed with screws 150 mm size.

S&F for door/shutter catcher, magnetic stopper/holder with striking plate for WPC board cabinets, cupboard shutters complete all as specified.

S&F 100 mm long stailess steel Butt hinges, with mild steel hinge pin, bright polished and fixed, typeB-11 complete all as specified and as directed.

S&F aluminium alloy floor door stoppers double legged length 140mm with hard drawn steel spring fitted in floor complete all as specified and as directed.

S&F 150 mm long Extruded stainless steel handles designer type, fabricated type polished complete all as specified and as directed.

S&F 100 mm long stailless steel handles designer type, fabricated type polished complete all as specified and as directed.

S&F 75 mm long stailess steel handles designer type, fabricated type polished complete all as specified and as directed.

S&F 100 mm size stainless steel tower bolts, with cast or sheet barrel and rolled or cast bolts and fixed complete all as specified and as directed.

S&F 150mm size stainless steel barrel tower bolts, with cast or sheet barrel and rolled or cast bolts and fixed complete all as specified and as directed.

M&L for 250mm long stainless steel sliding door bolt withsand or die-cast brass hasp, staple (bolt type) and fixing bolt with rolled or drawn brass bolts and fixed complete all as specified and as directed.

S&F in repair 25 mm stainless steel curtain rod of thickness 1 to 1.25mm with decorative funnels complete all as specified and directed by Engr-in-charge.

S&F SS heavy duty decorative brackets suitable for 25mm dia curtain rod (minimum projection from wall 75mm) fixed in wall including drilling, rawl plug, screws etc complete all as specified and directed. Note: Curtain rod shall be measured and paid separately

S&F in repair sinks made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes coupling and waste pipe; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 510mm x 510mm bowl size 460x460x230mm, complete all as specified and directed.

S&F sinks with drainage board made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes coupling and waste pipe; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified.

S&F vitreous china single piece EWC of Size: 360x640x685 mm, PP Soft Seat cover, Hinges, Fixing Accessories, Accessories Set, and dual Cistern fittings, P trap-180mm complete all as specified and directed. Make- Jaquar cat part No SLS-WHT-6851P180PP/SLS-WHT-6851S220PP or equivalent in kohlar, grohe and Roca

S&F vitreous china single piece EWC bowl with cistern for extended wall hung WC of Size: 380x630x770 mm, PP Soft Seat cover, Hinges, Fixing Accessories, Accessories Set, and dual Cistern fittings, P trap-180mm complete all as specified and directed. Make- Jaquar cat part No CNS-WHT-353SPPZ or CNS-WHT-755S220SPPZ Bowl with cistern for or equivalent in kohlar, grohe and Roca

S&F vitreous china Sensor Urinal of Size: 340x265x560 mm,wall hung urinal back inlet urinal with DC sensor, removable ceramic waste plug with water seal complete all as specified and directed Make- cat part No Aurore of Somany or equivalent in Jaquar, grohe and Roca

S&F in repairs glazed earthen ware viterous china wash down water closet(pedestal pattern) white coloured with and including plastic water closed seat, white, closed pattern with recessed bottom, and cover and mild steel chromium plated hinging device etc complete all as directed. Make somany Cat Part No. SMART EWC P or Equivelent in Cera/Hindware/Parryware

S&F in repair vitreous china Wash Basin counter Top 600x400x185mm including stainless steel bottle trap and 40 mm dia GI pipe up to Floor trap complete all as specified and directed by Engr-in-Charge Make : Cat Part No SLS-WHT-6601 & ALD-769L250x190 of Jaquar or equivalent in kohlar, grohe and Roca

S&F Repair decorative type WHB Vanity floor mounted made out of coloured PVC board of PVC/HDHMR, wash basin, side cabinet with mirror complete all specified and approved by GE Make: Cat part No. Count of Somany or Equivalent in Hindware/Parryware/Cera

S&F in repairs glazed earthen ware viterous china wash basin white coloured (flat back or angle back type), size 550x400 mm and including CI brackets, outlet of 32 mm bore HDPE outlet pipe with necessary fittings ,32 mm bore brass CP waste couplings and bottle traps for wash basins with inlet and outlet screwed for pipe or connections including necessary packing, union and cap and fixed etc complete all as directed.

S & F in repair 15 mm bore, fancy type, bib taps, long body, cast copper alloy, 15mm bore with fancy chromium plated screwed down, screwed for iron pipe or for brass ferrule complete all as specified and as directed by Engr-in-Charge. Make : Cat Part No FLR- 5047 N of Jaquar or equivalent in kohlar, grohe and Roca

S & F in repair 15 mm bore, fancy type, angular valve, cast copper alloy, screwed down, high pressure, with crutch or butter fly handle, screwed both ends for iron pipe or for unions complete all as specified and as directed by Engr-in-Charge. Make : Cat Part No FLR-5053 N of Jaquar or equivalent in kohlar, grohe and Roca

S&F for 15mm bore, 450mm long, PVC connections with brass unions internally threaded both ends complete fixed to iron pipe at both ends as fixed in repairs complete all as specified and as directed.

S&F in repair Health Faucet (ABS Body) with 1.20 M Long PVC Tube and wall Hook screwed down to GI pipe or union/angle valve complete all as specified and directed by Engr-in-charge Make Jaquar Code No- ALD-CHR-583 or equivalent in kohlar, grohe and Roca

S & F in repair CP, soap dish complete all as specified and as directed by Engr-in-Charge. Make Jaquar Code No- AKP -35731 P or equivalent in kohlar, grohe and Roca

S&F in repair Maze Overhead Shower 200X200mm Square Shape Single Flow (Body & Face Plate Stainless Steel with Chrome Finish) with Rubit Cleaning System including showe arm of size 400x25x25mm sq shape for wall mounted showers with flange, fixing to steel pipe or union complete all as specified. Make- Jaguar (Cat part No : OHS-1619 & SHA 455L400 or equivalent in kohlar, grohe and Roca

S&F sheet glass corner shelf wall mounted shelf assembly consisting of 5mm thick sheet glass 220mmX220mm size with chromium plated bracket guard and railing 50mm high complete all as specified and as directed. Cat Part no CAN -1173 of Jaquar or equivenet in Kohlar, Grohe and Roca

S&F in repair Towel Rack with Lower Hanger (Stainless Steel) with hook complete all as specified and directed. Make- Jaguar (Cat Part No: AHS-1581H) or equivalent in kohlar, grohe and Roca

S&F in repair brass chromium plated Tubular towel rail 20mm dia, D type, 60cm long between flanges.

Dismantling timber scantlings 40 sq. cm and over in section, in any position from unframed work as in roof members complete all as specified and directed

Dismantling of Battens for tiles spaced exc 15cm, shingles etc, of any size including tilting fillets

S & F in repair for 15 mm bore, fancy type, Wall Mixer 3-in-1 System with Provision for both Hand Shower and Overhead Shower Complete with 115mm Long Bend Pipe, Connecting Legs & Wall Flange and including Telephone Shower and shower stand complete all as specified and as directed by Engr-in-Charge. Make- Jaguar Cat Part No: FLR-5281N, Hand shower HSH 1715, flexible tube SHA-549D12 or equivalent in kohlar, grohe and Roca

S&F in repair 15mm dia brass chromium plated Single Lever Sink Mixer With Swinging Spout on Upper Side (Wall Mounted Model) With Connecting Legs & Wall Flanges for mixing hot and cold water, screwed down for 15 mm dia bore GI Pipe complete all as specified and directed. Make- Jaguar Cat Part No: FLR-5165 or equivalent in kohlar, grohe and Roca

S&F in repair 15mm dia brass chromium plated Central Hole Basin Mixer single lever tall boy with 150mm extension body fixed spout without popup waste system with 600mm long braided hoses for mixing hot and cold water, screwed down for 15 mm dia bore GI Pipe complete all as specified and directed. Make- Jaguar Cat Part No: FLR-5005NB or equivalent in kohlar, grohe and Roca

S&F in repair 15mm dia brass chromium plated two way bib cock with long flange screwed down for 15 mm dia bore GI Pipe complete all as specified and directed. Make- Jaguar Cat Part No: ARI 39041 or equivalent in kohlar, grohe and Roca

S & F in repairs PVC valve less, syphonic action type, flushing cistern 10 ltrs capacity, low level, white, with inlet, ball valve, float and handle, including brackets etc complete all as directed.

S&F in repairs 15mm size fancy type Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed etc complete all as directed.

S&F in repair rotational moulded polythylene water storage tank 1000 ltrs capacity (cylindrical/ vertical with closte top) hoisted and fixed in position all as specified in SSR Part-I including providing and fixing ball brass valve high pressure with polythene float and fly nut, 25mm bore complete all as specified and directed.

S&F in repair rotational moulded polythylene water storage tank 500 ltrs capacity (cylindrical/ vertical with closte top) hoisted and fixed in position all as specified in SSR Part-I including providing and fixing ball brass valve high pressure with polythene float and fly nut, 20mm bore complete all as specified and directed.

M&L for Cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes, etc.capacity of tank exceeding 250ltrs but not exc 500 ltrs

M&L for Cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes, etc.capacity of tank exceeding 500ltrs but not exc 1000 ltrs

S&F in repair15mm boreTubes, `medium grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and as directed.

S&F in reapir 20mm boreTubes, `medium grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and as directed.

S&F in reapir 25 mm boreTubes, `medium grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and as directed.

Cutting chases in Stone, concrete block or slab walls, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10cm girth all as specified and as directed.

S&F in repair 25mm bore Gun metal gate valves with iron wheel head screwd both ends for iron pipes complete all as specified and directed.

S&F in repair 20mm bore Gun metal, globe or gate valves with iron wheel head screwd both ends for iron pipes complete all as specified and directed.

S&F in repair for 110mm bore of PVC (SWR) pipes single socketed in any length with rubber ring joints laid on wall complete all as specified and as directed.

S&F in repair for 75mm bore of PVC (SWR) pipes single socketed in any length with rubber ring joints laid on wall complete all as specified and as directed.

S&F in repair PVC (SWR) bend with access door any radius 110mm complete all as specified and directed.

S&F in repair PVC (SWR) bend with access door any radius 75mm complete all as specified and directed.

S&F in repair for 75mm bore PVC (SWR) branch piece, single (single Y) equal or unequal complete all as specified and directed.

S&F in repair 75 mm PVC (SWR) junction single T equal or unequal complete all as specified and directed .

S&F in repairs 75mm bore PVC (SWR) floor trap plain with grating including jointing with solvent cement complete all as specified and as directed.

M&L for special treatment to floor/wall sunken portion with demolition of PCC with plaster of entire sunken area (bottom & sides upto dado level) including removal of demolished material exc 250m and n exc 500m, prepration of surface by cleaning to remove loose particles, dust, latance etc, replacement of floor trap, and applying 10mm thick plaster in CM (1:4) with WPC liquid Conplast 421,and applying one coat each of Nitoproof 100 priming coat @1Ltr/5Sqm, after the priming coat applying Nitoproof 120 on plastered surfaces @1Ltr/2.5Sqm, filling the sunken floor with PCC (1:5:10) using brick bat and WPC Conplast - 421, rendering again 40mm thick in CM (1:4) mixed with WPC Conplast - 421, area of floor/kitchen upto 0.5 Sqm complete all as specified and as directed.

Material and labour for water proofing treatment to sunken slab, walls, etc, and shall be carried out as specified below and as directed:- (a) Demolition of Cement concrete/brick bats filled on sunken slab upto mother slab including removing and Clean the sunken portion of toilet / Baths/ WCs/ Kitchen thoroughly to remove laitance, dirt, dust etc. (b) Brushing cement slurry with 1.2 kg of cement per square metre duly blended with & including water proofing compound. (c) 15 mm thick (Average thickness) plaster in cement mortar (1:4) mixed with water proofing compound on sunken surface including walls. The corner of sunken portion shall be rounded in concave shape and adequate slope shall be made during plastering to accommodate sump pipe and curing the sunken portion with water minimum for 48 Hrs by ponding. (d) Applying self adhesive type APP based polymeric membrane minimum weighing not less than 3.6 kg/ Sqm and minimum 3 mm thick reinforced with polyester non-woven fabric (weight not less than 150 gm/Sqm) (e) M&L for PCC 1:7:12 type F2 using brick course agreegates for filling of sunken portion after conceling all menbrane upto FFL and sealing all joints to the entire satisfaction of Engineer-in-Charge. (Note:- Floor area shall be considered for measurement & payment purpose)

S&F LDPE pipe 40mm bore fixed to wall/ceiling with bends/elbow complete all as specified.

S&F in repair mild steel ordinary rat tail rod pattern spring 300mm size including roller & roller plate and incl welding complete all as specified and as directed.

S&F in repairs 5mm thick mirrors with fixed with stainless steel bolt & nut and fixed to brick/stone masonry walls built in cement mortor etc complete all as directed.

S & F in repairs chromium plated fancy type Stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed

S & F in repairs chromium plated fancy type Concealed Stop valves 20mm , cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed

Dismantling wrought iron or mild steel work of any description not otherwise provided for and fixed in any position etc complete all as directed.

Dismantling of asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings including ridges etc complete all as specified and directed.

S & F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.47 to 0.50 mm thick 150 AZ of any colour having tensile strength of 550 Mpa as in roof covering including ridges /cladding to wall,fixed with self tapping screws as specified and directed.

S & F Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.47 to 0.50 mm thick 150 AZ of any colour having tensile strength of 550 Mpa as in roof covering including ridges /cladding to wall,fixed with self tapping screws as specified and directed.

Dismantling of single layer Mangalore pattern or similar tiles in roofing incl ridge/hip tiles etc complete all as directed.

M & L for Mangalore pattern ridge / HIP tiles to suit Mangalore pattern of roofing tiles, bedded and jointed in cm 1:6 complete all as complete all as specified and directed.

All as per item No 127 here in above but except tiles.

M & L for roof tile Mangalore pattern inter locking at side joints,laid dry complete all as specified and directed.

All as per item No 129 here in above but except tiles.

S&F for Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161-1979 grade St.-240 complete all as directed.

M&L for Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc.

M&L for preparation of new untreated steel or iron surfaces of any description, not otherwise, described, over 10cm width or girth and painting with two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed.

Taking down cement plaster any description on brick or stone walls etc including racking out joints hacking for key scrubbing down with water etc complete all as specified and directed.

M&L for Rendering in 15mm thick Ready Mix Plaster of Make- ACC’s “ACCOPLAST” / CK Birla’s “AEROCON” / Speed Dry Mix’s “ECO PLASTER” / “MAGIC PLAST” / “BUILDWELL on brick work or concrete surfaces etc finished surfaces even and smooth complete all as specifed and directed.

M&L for 5mm thick Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth.

Demolition of brick work / stone boulders masonry built in cement mortar incl all Quoins , archeas, pillars etc bu exc cluding ashlar facings, dressed stone work and precast concrete articles complete all as specified and directed.

M&L for Brickwork with fly ash Old size bricks, straight or curved on plan exc 6m mean radius, built in in CM 1:6 etc complete all as directed.

All as per item No 138 here in above but except bricks

M & L for walling of random rubble uncoursed, well bonded, bedded and solidly hearted, built in cement mortar 1:6 complete all as specified and directed.

All as per item No.140 here in above but except stone

Dismantling of posts or struts(wood, steel or RCC) any section embadded in concrete, including taking out embedded portion and making good disturbed ground all as specified and directed.

Dismantling of fencing wire mesh of any type complete all as specified and directed.

M & L for Providing high prestress precast ce-ment concrete Type M-25 in columns, posts, boundary pillars, with plain fair faces, including chamfers, weatherings, throat- ing etc. and setting in cement mortar 1:6 complete with joints to match as directed by Engr in charge. (Note: The quoted rate shall be inclusive of cost of high tensile carbonized steel wire dia 3 to 4mm reinforcement , Form work)

S&F for 50 mm thick prestress precast cement concrete M-25 using compound wall (both Side smmoth Finish), planks/panels locking each other louvres and jallies as per approved design/patterns Set in cement mortar1:4 , (measured solid ), including all mouldings but excluding frame as directed by Engr in charge. (Note: The quoted rate shall be inclusive of cost of high tensile carbonized steel wire dia 3 to 4mm reinforcement , Form work) (Note:columns/ poles will be measured seperately)

S&F for 40 to 50 mm thick (1:3:6) precast cement concrete compound wall , planks/panels locking each other louvres and jallies as per approved design/patterns Set in cement mortar1:4 , (measured solid ), including all mouldings but excluding frame as directed by Engr in charge. (Note: The quoted rate shall be inclusive of cost of reinforcement , Form work) (Note:columns/ poles will be measured seperately)

M&L for applying two coats of weather emulsion (APEX or Equivalent, white/red colour or as specified and directed by Engr-in-charge) " over two coat of primerincluding preparation of decorated plastered surfaces of walls/ceiling complete all as specified and directed.

M&L Complete removal of existing treatment of wall complete all as specified and as directed.

M&L Preparation of plastered or unplastered surfaces including Washing, rubbing down and stopping of distempered and painted surfaces and applying two coat of oil emulsion distemper (white or tinted) on walls complete all as specified and as directed.

S&F of 5mm thick ACP( aluminium composite panel) sheet on wall/coloumn/roof required to fixed with screws with required any shape icluding joint filled with silicon and approved colour by GE and complete all as specified and directed.

S&F in repair 12 mm thick toughned glass ( tinted/plain/froasted/film) with openable door of approved design including all fittings such as Bottom patch 163x50x31mm , with Top patch, over pannel patch, Big -L , Glass door centre type lock, four side connector, Small-L, three side connector, wall fix bracket, glass to glass 180 degree connector, glass to glass 90 degree connector, Double action floor spring, Pivot for top, wall to glass 90 degree connetor, wall mounted over panel patch with pivot, "H" type handle 450 mm long and double action floor spring hydraulically regulatedheavy duty floor door closer of 10 year warranty complete all as specified and directed Note: All fittings should be stainless steel 304 grade and approved by Engr-in-charge. Make of glass: modiguard/saint gobin or equivalent,

S&F in repairs Toughned glass (10mm in thickness) fixed doors, partitions, windows and similar work including eitching ,making logo etc cutting to shape, drilling holes required and fixing the glass on said location with all necessary ss joining cleats and as specified

Material & Labour for providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels,plates etc., including welding, grinding,buffing, polishing and making curvature (where everrequired) and fitting the same with necessarystainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel boltsetc., of required size, on the top of floor or the side of waist slab with suitable arrangement. all as specified and directed by Engr in charge

S&F in repairs Toughned glass (12mm in thickness) as in hinged doors, partitions automatic doors and similar work including cutting to shape, drilling holes required and fixing the glass on said location with all necessary joining cleats and as specified and directed by Engr-incharge.

S&F in repairs silver urinal flusher with infrared sensor wall mounted type with self flush operation having sensing range of 10-20cm and water pressure of 0.05-0.7Mpa including battery of make dolphy (model no DAUF0003) or equivalent all as specified and directed by engr-incharge.

Taking down unserviceable copper/aluminium point wiring (light, fan, socket or power) complete including fixture and fittings such as switches, socket outlets, ceiling roses, pendent brackets, holders etc.removing marerialso storeforeeping in safe custody or for taking credt and making good disturbed surfaces of walls, floor etc.complete all as directed.

Material and labour for point wiring with two runs of multi stranded stranded copper conductor PVC insulated unsheathed 1.5 Sqmm FRLSH cable in and including PVC casing caping of suitable size with PVC boards of appropriate sizes and all requisite accessories complete with PVC terminals box for mounting switches, sockets, fan regulators etc with one single core continuous 1.5 Sqmm,FRLSH multi stranded copper cable for earth wire complete all as specified and as directed for One light point controlled by one switch.

All as per Item No-157 here in above but One light point controlled by two 2 way switches.

All as per Item No-157 here in above but One fan point controlled by one switch

All as per Item No-157 here in above but One 3 pin socket outlet 5 Amps on the same board.

All as per Item No-157 here in above but One 3 pin socket outlet. 5 Amps on the independent board

All as per Item No-157 here in above but One bell point controlled by one switch

All as per Item No-157 here in above but One 15 A socket outlet independent with 2.5 sq mm PVC cable and 2.5 sqmm cable as earth continuity wire.

S & F for One 15 A socket outlet on the same board with 2.5 sq mm PVC cable and 2.5 sqmm cable as earth continuity wire.

Supply and fix in repair switch piano flush type single pole one way 6 Amps complete all as specifed .

Supply and fix in repair switch piano flush type single pole one way 15 Amps complete all as specifed .

Supply and fix in repair switch piano flush type single pole two way 6 Amps complete all as specified .

Supply and fix in repair Bell push button 5 Amp, flush type complete all as specified .

Supply and fix in repair Bell, Ding Dong electric AC 230 Volts single pole complete all as specified and as directed.

M & L for in repair switch socket combination 3 pin 6 Amps flush type (multi purpose ) complete all as specified and as directed.

supply and fix socket outlet 3 pin 5 Amps flush type complete all as specified and as directed

supply and fix socket outlet 3 pin 5 Amps & 15 Amps flush type universal complete all as specified and as directed

M & L in repair for switch socket combination 2 in 1, 3 pin, 5 and 15 amp flush type universal complete all as specified and as directed.

M&L Point wiring with two single core, 1.5 sqmm (nominal area) size multistranded copper conductor cable and one single core 1.5 sqmm size copper conductor cable as earth continuity conductor connected to common earth dolly,1100 volts grade , FRLSH, PVC insulated sheathed cable in and including PVC rigid conduit of suitable size, duly concealed in wall, floor, ceiling etc,or existing conduit as directed by Engr in charge including provision of G I modular type terminal boxes of suitable module made with mild steel sheet duly galvanised and suitable for fixing modular type switches / sockets / regulators / AC starters in and including cover plate etc. fixed in recess of wall with brass chromium plated screws and cap washer complete for the following:-

One light point controlled by one switch

One fan point (Ceiling, wall and Exhaust) controlled by one switch

One 5 pin, 6 A socket outlet on the same board

One 5 pin, 6 A socket outlet on the independent board.

All as per item No 1 here-in-before but with two 2.5 sqmm size cables as phase and neutral and one 2.5 sqmm size cable as earth continuity conductor for one 15 Amps socket outlet independent -ditto-

M& L in repair Modular type switch, 1 way,6 Amps, 1 module

M& L in repair Modular type socket, 3 pin combined, 6 Amps, 2 module

M& L in repair Modular type switch, 1 way, 16 Amps, 1 module

M& L in repair Modular type socket, 3 pin, 6 Amps / 16 Amps combined, 2 module

M& L in repair Electronic step regulator (Modular type) (speed regulation in 5 steps) suitable for ceiling fan 1200 / 1400 mm sweep 120 watts

M& L in repair electronic step type Fan regulator flush type (speed regulation in 5 steps) 120 watts complete all as specified and as directed.

M & L in repair ceiling rose of size 65 X 25 mm surface Bakelite three terminals complete all as specified and as directed.

S & F in repair lamp holder PVC/ Poly carbonate, angle/batten Bakelite complete all as specified and directed.

S & F in replacement of lamp Holder angle/batten type with LED Lamp (B22 Base) 10 Watts complete all as specified and directed.

S & Fin replacement LED Tube rod light double side connection , 18/20 watt Suitable for 4 feet long frame all as specified and directed.

S&Fin replacement wall mounted LED Light fittings, 4 feet long, with 18 W LED tube rod and box type batten double side connection type complete all as specified and directed.

S&F in replacement wall mounted LED Light fittings, 2 feet long, 9 W, polycarboate housing and integrated electronic driver complete all as specified and as directed.

S&F in replacement Decorative wall light fixture, plastic body and designer mesh in gold finish suitable for and incl with 10 Watt LED lamp (B22 base)all as specified and directed .

S&F in replacement Decorative wall light fixture, madeup of polycarbonate and incl with 10 Watt LED lamp (B22 base)all as specified and directed .

S&F ceiling mounted 2x2 LED luminaire Recessed full lit with glare free uniform illumination with longer life and less maintenance 36 Watt complete pre-wired all as specified and directed. Make: Crompton/ Havells/ Bajaj

S&F in replacement Surface mounted Comet square shaped/ round LED luminaire die cast body with premium diffucer (Comet squre/ round or in warm white )with glare free soft light 18 Watt complete pre-wired all as specified and as directed.

Supply and fix in replacement Trim Clipon LED 18Watt Panel Unique Slimmest recess com surface panel, solution to provide variable cut out size for installation in recess all as specified and as directed.

S&F Building security light fittings, with pressure die cast aluminium housing, suitable for 30 W LED, complete pre-wired, incl suitable bracket for fixing light on wall or any indicated locaction all as specified and as directed.

S&F in replacement Post top, (Coral Opal) landscape luminare with high power LED 25 W making arrangement for fixing light fittings on pole/stand post/pillar with GI pipe all as specified and directed

Supply & Install in replacement gate light / post top lantern unbreakable polycarbonate material suitable for and incl 10 LED Lamp (B22 base) with necessary base post/ suitable PVC pipe of 1mir long for installation as garden light/pole/post all as directed at site by Engr-in-charge.

Supply & Install in replacement decorative gate light / post top lantern Plutto Opal madeup of unbreakable polycarbonate material suitable for and incl 10 LED Lamp (B22 base) with necessary base post all as directed at site by Engr-in-charge.

Supply and Fix in replacement BAMBOO IP65 New generation energy saving environmental friendly aluminium body, landscape luminarie for diffused lighting with high power LED as light source length of 01 mtr long 8 Watt all as directed at site by Engr-in-charge.

Supply and Fix in replacement BAMBOO IP65 New generation energy saving environmental friendly aluminium body, landscape luminarie for diffused lighting with high power LED as light source length of 0.5 mtr long 8 Watt all as directed at site by Engr-in-charge.

S& F in repair LED Sparc Lights of Spot/Focus 7 watts metallic body of swivel down light Make approved by Engineer in charge as per sample

S& F in repair LED track light FUOKO 12 W, body colour black or white product code LSPT 12 (60) or approved by Engineer in charge as per sample

S& F in repair LED track light channel 1 mtr in length including connector etc all as specified and directed Engineer in charge as per sample

S& F in repair LED recessed mounted deep recessed adjustable/ fix down light for good quality illumination to enhance the displaycorridors, sand models,accent lighting of 24 watt Make approved by Engineer in charge as per sample

S& F PDC housing LED Bulkhead luminaire with opal diffuser,equipped with 2kv in-built surge protection with IP 65 protection rating Make Bajaj cat part No BIBWP 10W LED equivalent in Crompton/ Havells/Wipro

S& F Ceiling mounted round shape 12 W LED Warm white or white luminaire Crysta chip on board (COB) swivel down light with crisp light throw and CRI,Make of Havells model crysta 12 W LED 3000 K LHEEGEPBIE1W012 or equivalent in Crompton/Philips

S& F Ceiling mounted octane panel light square shape 24 W LED luminaire ,slim, compact,aluminium diecast edge lit panel recess mounted square fixture with open diffuser and separate electronic driver Make of Havells Cat part No LHEBAEP7IZ1W024 or in warm white or equivalent in /Crompton/Philips

Supply & Fixing in repair LED flood light fittings 50W LED IP65 COB LED as light Source, Symmetric type including required accessories, clamps and eletric connections complete all as specified and as directed. Make : Havells JETA Compacto cat part No:JETA QUANTOPLUSFLP50WLED757SYMLENS

Suuply and fix in repair new sheet metal enclosure for DB'S when MCBs to e used Triple pole and neutral 4 way double door complete all as specified and directed.

Supply and fix in repair sheet metal enclosure double door 12 way DBs SPN, 240V with 200 Amps rated bus bars double door complete all as specified and as directed.

Supply and fix in repair sheet metal enclosure double door 8 way DBs SPN, 240V with 200 Amps rated bus bars double door complete all as specified and as directed.

Supply and fix in repair sheet metal enclosure double door 4 way DBs SPN, 240V with 200 Amps rated bus bars double door complete all as specified and as directed.

Supply and fix in repair MCB triple pole and neutral 415 V 63 Amps complete all as specified and directed.

Supply and fix in repair MCB SPN 40 to 63 Amps, 240 volts complete all as specified and as directed.

Supply and fix in repair MCB SPN 20 to 32 Amps, 240 volts complete all as specified and as directed.

Supply and fix in repair MCB SP 6 to 32 Amps, 240 volts complete all as specified and as directed.

M & L in repair sub main wiring with 2 single core, 6 Sq. mm, PVC insulated unsheathed,multi stranded copper conductor FRLSH cable 1100 Volts grade including 6 Sqmm PVC insulated unsheathed multi stranded copper conductor FRLSH as continuous earth wire drawn through Casing caping and connecting to common earth terminals complete all as specified and directed. Note :- (i) Two runs of copper cable and one run of earth wire including conduit /PVC casing/caping shall be measured as one length.

All as per item No - 219 here in above but with 2 runs of 4 Sqmm cable with one run of 4 Sqmm cable for earthing.

All as per item No - 219 here in above but with 2 runs of 2.5 Sqmm cable with one run of 2.5 Sqmm cable for earthing.

S & F in repair Plug & socket enclosure in sheet metal enclosure with 20A SP MCB complete all as specified and as directed.

Supplying and Fixing/connecting for service connection/ Garden light connection, 1100 volts weather proof flat twin core Cable PVC insulated aluminium multy sranded conductor of sizes 4 Sqmm 2 Core Complete all as Specified and Directed.

All as per item 223 here in above but sizes 6 Sqmm 2 Core.

All as per item 223 here in above sizes 10 Sqmm 2 Core.

M/S MANISH CONSTRUCTION CO (BID ID -3456519)

Samruddhi Construction (BID ID -3457480)

Horizon Construction (BID ID -3457550)

shubham Enterprises (BID ID -3459685)

M/s M R MAHANA (BID ID -3457393)