MISC B/R REPAIR WORK PLASTERING, FLOORING, TILING, SANITARY WORK ETC IN MD ACCN OF SOUTH AREA FOR ZONE A AND B UNDER AGE B/R-II AT GE NASIRABAD AND REPAIR /MAINT OF INTERNAL ELECTRIC WIRING OF CERTAIN OTM ACCN AT 2 BHAIRAV REGT IN NASIRABAD STATION G

Amount

Dismantling floor, hearth or wall tiles, including cement mortar, removing serviceable tiles from site & rubbish off the premises complete all as specified and directed.

M&L for non skid ceramic coloured tiles 7 to 8mm thick area of each tile exceeding 0.11 Sqm but not exc 0.18 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bedding in cement mortar 1:6 complete all as specified and directed

M&L for For Glazed ceramic coloured tiles in verticle surface of size350x250mmx7mm/450x350x7mm thick, such as skriting, dados, riser etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 10 mm thick rendering in CM 1:4 complete all as specified and directed

M&L for ceramic coloured tiles, 10mm thick (square/ rectangular) polished, area of each tiles exc 0.18 sqm but in exc 0.38 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed in CM 1:4 complete all as specified and directed

M&L for glazed ceramic coloured tiles 7 to 8mm thick in vertcial surfaces of size 600x1200mm set and sqm jointed in neat cement slurry and pointed in white or colour cement to match over and including 10mm thick screed plaster in cement mortar 1:4 complete all as specified and directed.

M&L for vitrified ceramic tiles light shade10mm thick (square/rectangular) polished, area of each tiles exc 0.42 Sqm but not exceeding 1.00 Sqm, in floor etc set and jointed in 3mm width epoxy filling in white or coloured match to tile, including screed bed 15mm thick in CM 1:6 complete all as specified and directed.

M&L for vitrified ceramic tiles light shade 10mm thick (square/rectangular) polished, area of each tiles exc 0.42 Sqm not exceeding 1.00 sqm, in vertical surfaces such as skirting, dados etc set and jointed in neat cement slurry and pointed in white or coloured cement to match including screed plaster 10mm thick in CM 1:4 complete all as specified and directed.

S&F Marbonite tiles full body matt vitrified tiles confirming to 15 15622:2017 and ISO 13006:2018/EN14411 Standards as per approved colour/design or equivalent of 12-15mm thick, size of tiles is 600x1200mm, in floors/platforms etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed in CM 1:4 complete all as specified and directed.

M&L for 20mm thick granite (of any type) work (table rubbed and polished) in steps, jambis, Sqm pillars, window-cils, cooking platforms. WHB platform and like pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including laid over 15mm thick screed bed in CM (1:6) including rounding to edges of stone slab complete all as specified and directed

Demolition of cement concrete (unreinforced) in floors and pavings n. exc 15cm thickness (above or Cum below GL) complete all as specified and directed

M&L for 25 mm thick cement concrete, type B-0, 1:2:4 (Using 12.5mm crushed stone aggregate), finishing cement concerete surface even and smooth without using extra cement complete all as specified and directed

M&L, for 20-25 mm thick machine cut kota stone slab flooring set and jointed with grey cement slurry mixed with pigment to match the shade of the slab induding 20 mm thick screed bed in cement mortar 1:4, rubbing, polishing complete including demolition Stone slabs and tiles of any description or thickness in floors aprons etc laid bedded and pointed in any mortar complete all as specified and directed

M&L kota stone slab 20-25mm thick in riser of steps, skirting,dado and pillar laid over cement acreed and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete including 10 mm thick rendering in vertical surface of brick/PCC block wall in cement mortar 1:4 and including demolition of old kota stone dedo complete all as specified and directed

Taking down cement or cement lime plaster on stone/brick wall, ceiling incl. Raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed

M&L for rendering 15mm thick in CM 1:4 on stone masonry, extemal surfaces finished even and smooth without using extra cement complete all as specified and directed

M&Lfor rendering in cement mortar (1:6), 15mm thick on stone masonary surfaces finished even and smooth (without using extra cement) over and including dubbing coat (if required) complete all as specified and directed

M&L for rendering in cement mortar (1:3) 10mm thick as in celling surfaces finished fair and even complete all as specified & directed.

M&L for rough cast plaster mix with crusted stone (6-10 mm), sand and cement in the ratio 1:1:1. over 15mm thick rendering in CM 1:4 as in under coat including dubbing coat (if required) complete all as specified and directed.

M&L for preparation of new plastered surface of wall and appliying two coats of cement base paint over a coat of cement based primer complete all as specified and directed.

M&L for preparation of new plastered surfaces of wall and applying two coats of oil bound distemper over 1mm thick wall care white putty on plastered surface complete all as specified and directed.

M&L for preparation of new plastered surfaces of ceiling and applying three coats of white wash complete all as specified and directed.

Demolition of brick work or stone masonary built in cement mortar etc complete all as specified and directed.

M&L for walling Random rubble masonary uncoursed well bonded bedded and solidly hearted and built in cement mortar 1:6 etc including hammer dressing of slow masonary complete all as specified and directed.

M&L for brick work with sub class old size bricks, straight or curved on plan to any radius in cement Cum 2.00 mortar 1:4 complete all as specified and directed.

Taking up or down existing Gi Tubing15 mm dia & connections including cleaning for refixing or removal to store complete all as specified and directed.

Taking up or down existing Gi Tubing 20 mm dia & connections including cleaning for refixing or removal to store complete all as specified and directed.

Re-Fixing only old steel tubing of 15 mm dia with connections obtained from taking down herein before in new or old or new position fixed to wall, ceiling or laid in floor complete all as specified and directed.

Re-Fixing only old steel tubing of 20 mm dia with connections obtained from taking down herein before in new or old or new position fixed to wall, ceiling or laid in floor complete all as specified and directed.

S&F, 15 mm bore galvanized iron tube medium grade with all fittings such as bends, elbos, socket, reducer and fixed to wall, ceiling or laid in floors complete all as specified and directed.

S&F, 20 mm bore galvanized iron tube medium grade with all fittings such as bends, elbos, socket, reducer and fixed to wall, ceiling or laid in floors complete all as specified and directed.

Cutting chases, pinning in making good to facing on brick walls & pointing in CM 1:3 for concealed water tubing cutting n exc 10 cm girth complete all as specified and directe.

S&F rotational moulded polethylene water tank of 1000 itrs capacity (cylindrical vertical with closed top) hoisted and fixed in position all as pacific SSR Part-1, including ball valves 20mm high pressure PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed ( min wt.15mm-142gms/20mm-210gms.25mm-455gms.40mm-690 gms) including of dismantling of existing water tank complete all as specified and directed

S&F rotational moulded polethylene water tank of 500 itrs capacity (cylindrical vertical with closed top) Each hoisted and fixed in position all as pacific SSR Part-1, including ball valves 20mm high pressure PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed ( min wt. 15mm-142gms/20mm-210gma 25mm-455gms,40mm-690 gms) including of dismantling of existing water tank complete all as specified and directed

Cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes, etc. Exc 250 ltr but n exc 500 ltr complete all as specified and directed

Cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes, etc. Exc 500 ltr but n exc 1000 Itr complete all as specified and directed.

S&F in repair 15 mm dia bib tap, fancy type chromium plated cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed.

S&f in repair 15mm bore pillar tap cast copper alloy fancy type with capston heads, chromium plated screwed down high pressure, with or without letters Hot or Cold with long screwed shanks and fly nuts. screwed for Iron pipes and fixed complete all as specified and directed.

S&F in repair Angle Valve 15mm bore (dia), Cast Copper alloy, Chromium Plated, Fancy type including flange, screwed down, high pressure, screwed both Ends for Iron Pipe complete all as specified and as directed.

S&F in repair of Health Faucet with Wall Hook, Chromium Plated having 1.00 Metre long with PVC Hose Pipe complete all as specified and as directed.

S&F in repair 20 mm dia gun metal globe or gate valves, with iron wheel head, screwed both ends for iron pipe complete all as specified and directed.

S&F in repairs chromium plated swivel shower roses with or without swivel joints for fixing with Each 15mm pipe fixed complete all as specified and directed.

S&F in repair Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and ralling 60cm long complete all as specified and directed.

S&F in repairs tubular towel rail, 20mm dia, D type, 60cm long between flanges complete all as specified and directed.

S&F in repair PVC connection 15mm bore length not less than 450 mm long with both ends PTMT nuts complete all as specified and directed.

S&F in repair vitreous china wash down water closet pan pedestal pattern white including connection in drain and in flushing pipe complete induding or 'S' trap and including plastic water closet sear cover with flat botton specified with flat bottom and cover with MS Chromium plated hinge divice ISI marked complete all as specified and directed

S&F in repair vitreous china squatting pan ORISSA partem size 580mm x 440 mm white with integral foot rests (excluding flushing cistern and flush pipej including connection to trap and to flushing pipe. anti syphonage pipe etc and making good to floor complete all as specified and directed

S&F in repair vitreous china wash basin white, flat, back, size 550x400 mm excluding tap waste but including brackets and including cutting for and pinioning in ends of brackets but exclusive of supply waste pipe complete all as specified and directed.

Supply and fix in repair 10 ltrs PVC valveless syphonic action type flushing cistern low level white , with inlet ball valve, float and handle including bracket with 32 mm dia PVC pipe 600 mm long complete all as specified and directed.

S&F in repair of 110mm PVC (SWR) pipes single socketed in any length with rubber joints fixed to wall or laid in floors / trenches with including taking out of old pipe new MS stack clamps of FI 50 x 3mm complete all as specified and directed.

S&F in repair of 75mm PVC (SWR) pipes single socketed in any length with rubber joints fixed to wall or laid in floors / trenches with including taking out of old pipe new MS stack clamps of FI 50 x 3mm complete all as specified and directed.

S&F in repair of 75mm PVC (SWR) junction single, (Single T) equal or unequal with access door with cement joint complete all as specified and directed.

S&F in repair of 75mm bore PVC (SWR) bend / shoe of any radius with access door, complete all as specified and directed.

S&F in repairs PVC (SWR) floor trap/ Nahani trap 75mm, plain with grating including jointing to waste pipe fixed in cement concrete type (1:2:4) complete all as specified and directed.

S&F in repairs 110mm bore PVC (SWR) vent cowl complete all as specified and direted.

S & F in repair of stack clamps made out of 50 X 5mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof for 110mm bore pipes complete all as specified and directed.

M&L for complete removal of existing treatment and applying two coat of white wash on ceiling (plastered or unplastered) surface complete all as specified and directed.

M&L for complete removal of existing treatment and applying two coat s of oil bound distemper over 1mm thick wall care white putty on plastered surface of wall complete all as specified and directed.

M&L for complete removal of existing treatment, and applying two coat of cement base paint over one coat of primer in plastered surface complete all as specified and directed.

M&L for preparation of old decorated wooden surfaces of any description, not otherwise described over 10cm width & girth and applying one coat of synthetic enamel paint complete all as specified and directed.

M&L for preparation of old painted surfaces of Steel by brooming down or steel wire brushing, scraping down smoke spot, moulds, moss and efflorescent salt and greasy spots and applying one coat of synthetic enamel paint complete all as specified and directed.

Taking down carefully aluminium/copper point wiring (light, fan,socket or power) of any type complete including fittings and fixtures such as switches, ceiling roses, pendants, holders, sockets, light fittings, removing materials to store for keeping in safe custody or for taking credit and making good the disturbed surfaces of walls/ceiling/floor at various site etc complete all as specified and directed.

Disconnecting of unserviceable sub main wiring of any size including conduit of any type and accessories & removing from site and making good the disturbed surfaces complete all as specified and directed.

Disconnecting electric connections and taking down old unserviceable MCB DBs of any type including MCBs SPN/SP/TPN of any capacity complete all as specified and directed.

Taking down carefully by unscrewing from boards/outlet boxes, light fittings and fixtures such as tube light fittings, bulk head fittings, mirror light, bldg sec light etc for re use at site or carrying to the store (To be measured only when found serviceable in all respects complete for re use.) complete all as specified and directed.

M&L for point wiring with 1.5 Sqmm. (nominal area) single core PVC insulated 1100 Volts, grade multi stranded FRLS copper conductor unsheathed in and including non metallic rigid PVC concealed conduit 20 mm dia or higher complete with all PVC conduit accessories such as socket, elbow, junction box, bell mouth, reducer, bend and flexible conduit etc./ fittings ISI marked and sunk type pressed steel anodised terminal box with bakelite laminated sheet top cover 3 mm thick, brass screws and cup washers including one green colour cable of same size as earth wire up to common earth and connected to earth dolly compete all as specified and directed at site for the following :

One light point/bell point controlled by one way 5 Amps single pole switch.

One ceiling fan/exhaust fan point controlled by one way 5 Amps single pole switch.

One 5 pin 5 Amps socket outlet on same board with other switch.

One 5 Pin 5 Amps socket outlet on independent board with other switch.

One light point controlled by two, 2-way switches.

All as per item No 66.00 above but with 2.5 Sqmm single core multi stranded PVC insulated unsheathed (FRLS) cable for 15 Amp socket outlet on independent board.

M&L for point wiring with 1.5 Sqmm. (nominal area) single core PVC Insulated 1100 Volts, grade multi stranded FRLS copper conductor unsheathed in and including PVC casing & caping with all PVC casing caping accessories and sunk type pressed steel anodised terminal box with bakelite laminated sheet top cover 3 mm thick, brass screws and cup washers including one green colour cable of same size as earth wire up to common earth and connected to earth dolly compete all as specified and directed at site for the following :

One light point/bell point controlled by one way 5 Amps single pole switch.

One ceiling fan/exhaust fan point controlled by one way 5 Amps single pole switch.

One 5 pin 5 Amps socket outlet on same board with other switch.

One 5 Pin 5 Amps socket outlet on independent board with other switch.

All as per item No 68.00 above but with 2.5 Sqmm single core multistranded unsheathed (FRLS) cable for 15 Amp socket outlet on Independent board.

M&L for point wiring with 1.5 Sqmm. (nominal area) single core PVC insulated 1100 Volts, grade multi stranded FRLS copper conductor unsheathed cable in and including PVC rigid non metallic conduit medium grade not less than 20mm dia ISI marked and fittings and accessories concealed in walls/roof/ ceiling with suitable size of sunk type pressed steel modular terminal box and modular white cover plate with frame of suitable module as per site requirements for mounting of modular switches, sockets, fan regulator etc and one green colour cable of 1.5 Sqmm. (nominal area) single core PVC insulated 1100 Volts, grade multi stranded FRLS copper conductor unsheathed as earth wire up to common earth and connected to earth for the following complete all as specified and directed at site for the following :

One light point/bell point controlled by one way 5 Amps single pole switch.

One ceiling fan/exhaust fan point controlled by one way 5 Amps single pole switch.

One 5 pin 5 Amps socket outlet on same board with other switch.

One 5 Pin 5 Amps socket outlet on independent board with other switch.

One light point controlled by two, 2-way switches.

All as per item No 70.00 above but with 2.5 Sqmm cross sectional area electric cable for 15 Amp socket outlet on independent board.

S&F of switch piano type, flush button single pole, one way 5 Amps complete all as specified and directed.

S&F of switch piano flush type, 5 Amp, 240 volt, single pole, two way switch complete all as specified and directed.

S&F of switch plano flush type 15 amps, single pole one way 240 volts complete all as specified and directed.

S&F of switch bell push, flush type, 5 Amp complete all as specified and directed.

S&F of socket outlet 5 Amps, 5 Pin, flush type complete all as specified and directed.

S&F of socket out let 2 in 1, multipurpose 3 pin 15/16 Amp flush type complete all as specified and directed.

S&F of stepped type (switch type) electronic ceiling fan regulator flush type, AC, 230 volts complete all as specified and directed.

S&F of modular switch 1 way 6/10Amp, 1 module complete all as specified and directed.

S&F of modular switch 1 way 16Amp, 1 module complete all as specified and directed.

S&F of modular switch 2 way 6 Amp, 1 module complete all as specfied and directed.

S&F of modular bell push, 6 Amp, 1 module complete all as specified and directed.

S&F of modular socket 6 Amp, 2/3 pin combined 2 module complete all as specified and directed.

S&F of mdoular socket 6 Amp/16 Amp, 2/3 pin combined 2 module complete all as specified and directed.

S&F modular stepped type ceiling fan regulator, 230 volt AC, 2 module complete all as specified and directed.

Supply and fixing of ceiling rose, surface type bakelite 65x17.5 mm, three terminals complete all as specified and directed.

Supply and fixing of door bell electric, ding dong type, AC 230 volts, single phase complete all as specified and directed.

S&F of lamp holder PVC/polycarbonate type with back plate complete all as specified and directed.

S&F in repair LED tube light fitting in acrylic linear tube (1x 18 watt), 230V Each 200.00 for single LED tube light including 1 x 18 W LED retrofit bar professional CW 6500 K cover channel with Al. heat sink inside fixture, bipin holders, LED power driver, connector block, etc complete with all accessories internally prewired and including connecting up with three core flexible copper conductor cable with suitable size for connection of fitting from ceiling rose complete all as specified and directed.

Supply and fixing wall mounted decorative luminarie fitting suitable up to 9/10 Watt LED lamp champagne gold finish fixture with plastic body suitable for B22 Base complete all as specified and directed.

Fixing only serviceable light fitting any type and make obtained from srl item no. 65.00 complete all as specified and directed.

Supply and fixing in repair LED mirror light fitting, 10 watt, 600 mm length complete with all accessories pre-wired and including connecting up with flexible copper conductor cable with suitable size complete all as specified and directed.

Supply and fixing in repair LED light fittings, 10 W bulk head luminaries 230V, 50 Hz complete with all accessories and including connecting up with three core copper conductor cable with suitable size complete all as specified and directed.

Supply and fixing in repair testing and commissioning energy saving street light luminaire 35/40 watt LED, pressure die cast housing with epoxy powder coated with colour finish and prismatic poly carbonate coverlic cover complete, IP 66 protection incl connecting with three core copper flexible wire from ceiling rose to connector of light fitting complete all as specified and directed.

Supply and fixing in repair recess mounted LED 12 watt Slim edge lit panel minimum lumen output 120 lumens/Watt, total system lumens 1440, compact, aluminum die cast housing, round fixture with opal diffuser and separate electronic driver complete all as specified and directed.

Supply and fixing in repair recess mounted 2 x 2' LED luminarie 36 watt, cool day/warm white light with white powder coated CRCA housing with LED driver, lumen efficacy >100 Lm/w complete all as specified and directed.

Supply and fixing in repair surface mounted 2' x 2' LED luminarie 36/32 watt, cool day/warm white light with white powder coated CRCA housing with LED driver, system lumen efficacy >120 Lm/W, complete all as specified and directed.

Supply and fixing in repair street light bracket made of 32 mm Gl pipe. 1.2 mtr lenght fixed with two nos of clamp, nut and bolts complete all as specified and directed.

M & L for Submain wiring with two single core PVC Insualated, unseathed, FRLS, 1100 volts grade 6 Sqmm multi stranded copper conductor cable drawn through and including 25 mm dia PVC non metallic rigid conduits and the conduits accessories incl one run of green colour earth continuity conductor with 6 Sqmm multi stranded copper conductor cable, in concealed conduit in wall/ roof/ ceiling complete all as specified and directed. Note: Two run of single core cable, one run of earth continuity conductor shall be measured as one unit length.

M & L for Submain wiring with two single core PVC insualated, unseathed, FRLS, 1100 volts grade 6 Sqmm multi stranded copper conductor cable drawn through existing concealed conduit incl one run of green colour earth continuity conductor with 6 Sqmm multi stranded copper conductor cable complete all as specified and directed. Note: Two run of single core cable, one run of earth continuity conductor shall be measured as one unit length.

Supplying and fixing 1100 volts grade heavy duty cable PVC insulated stranded aluminium conductor, served with inner sheathing of PVC tape and overall PVC sheathed in service connections suspended by insulating hangers not more than 1 metre apart including 4mm suspension wire, one twin core cable flat or circular 16 sqmm complete all as specified an directed.

All as per item ser No 101.00 here-in-before but of size 10 sqmm twin core.

All as per item ser No 101.00 here-in-before but of size 6 sqmm twin core.

M & L for earthling complete with Gl earth plate electrode 60 cm x 60 cm x 6 mm thick, buried directly in ground (earth pit not less than 2.25 mtr deep below normal ground level) with top edge of the plate not less than 1.5 mtrs below normal ground level connected to earth lead 32x6 mm galvanised iron strip dia by means of bolts, nuts, check nuts and washers of galvanized iron or steel all as shown in electric plate No 3 of SSR Part-I connected to continuous earth wire on main switch board all as specified or indicated and testing on completion including provision of earth lead protection by 40 mm dia medium grade Gl pipe and watering pipe shall be 20 mm bore, medium grade including excavation & earth work in any type of soil & disposal of soi, providing alternate layers of charcoal and common salt, constr of PCC earth chamber in mix 1:3:6 type C-1 with 40mm thick RCC 1:2:4 type B-1 cover with handle made out oof 8mm dia bars, watering arrangement with funnel & wire mesh incl dismantling old unsv earthing complete all as specified and directed. Note. The unit rate includes for protection pipe and Gl strip 32x6 mm from top of earth plate up to 7.5 meter above ground level complete all as specified an directed.

Supply and fix in repair house house service bracket hook type complete with 3 mtr long Gl pipe 40 mm dia med grade, two nos 90° bracket, MS hook and stay or guy complete all as specified and directed

S & F of MCB SP, 240 volt, 6 Amp to 32 Amp capacity, 10 KA, 'C' curve complete all as specified and directed.

Supply and fixing of MCB SPN 10 to 40 Amp capacity, 10KA, 'C' curve complete all as specified and directed.

Supply and fixing of MCB SPN 63 Amp capacity, 10 KA, 'C' curve complete all as specified and directed.

Supply and fixing of MCB TPN 63 Amp capacity, 415 volt complete all as specified and directed.

Supply and fixing of MCB TPN 100 Amp capacity, 415 volt, complete all as specified and directed.

S&F MCB distribution board single pole & neutral with 200 Amps rated bus bar, double door, IP-43, DB's made out of CRCA sheet steel enclosure, recessed type, factory made powder coated, 8 way, 240 volts suitable for housing MCB's and isolator's complete in all fixing material/accessories etc complete all as specified and directed. Note: MCB DB and MCB will be of same make.

S&F MCB distribution board single pole & neutral with 200 Amps rated bus bar, double door, IP-43, DB's made out of CRCA sheet steel enclosure, recessed type, factory made powder coated, 12 way, 240 volts suitable for housing MCB's and isolator's complete in all fixing material/accessories etc complete all as specified and directed. Note: MCB DB and MCB will be of same make.

S&F MCB distribution board single pole & neutral with 200 Amps rated bus bar, double door, IP-43, DB's made out of CRCA sheet steel enclosure, recessed type, factory made powder coated, 4 way, 240 volts suitable for housing MCB's and isolator's complete in all fixing material/accessories etc complete all as specified and directed. Note: MCB DB and MCB will be of same make.

S&F of MCB distribution board triple pole & neutral IP-43 double door metal, 4 way,415 volt made out of CRCA sheet steel, factory made powder coated with insulated bus bars, shrouded neutral bars, earth bars, made out of sheet steel enclosure, recessed type, factory made powder coated suitable for housing MCB's complete all as specified and directed. Note: MCB DB and MCB SP/SPN will be of same make.

S & F in repair single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole 20 Amp MCB SP "C' series for geyser & AC complete all as specified and directed.

M & L for Submain wiring with two single core PVC insualated, unseathed, FRLS, 1100 volts grade 4 Sqmm multi stranded copper conductor cable drawn through and including 25 mm dia PVC non metallic rigid conduits and the conduits accessories incl one run of green colour earth continuity conductor with 4 Sqmm multi stranded copper conductor cable, in concealed conduit in wall/ roof/ ceiling or casing caping for geyser and AC complete all as specified and directed. Note: Two run of single core cable, one run of earth continuity conductor shall be measured as one unit length.

PD GUPTA AND COMPANY (BID ID -3488834)

TANISHQ ENTERPRISES (BID ID -3487284)

Shree Sai Ram Enterprises (BID ID -3489953)

V K LAKWAL CONSTRUCTION (BID ID -3488848)

M/s AKASH CONSTRUCTION CO. (BID ID -3488202)

GOMA CONTRUCTION COMPANY (BID ID -3488703)