Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹48.4 LAccepted-AOC 67 B PANDU TEMPLE GHAT PANDU TEMPLE GHAT NEAR WEST GUWAHATI BED COLLEGE KAMRUP ASSAM 781012 | KAMRUP METRO | ASSAM | 781012 | L1 | Accepted-AOC AOC AWARDED DUE TO L1 BIDDER | |
| 2 | L2₹51.0 L+₹2.1 L (4.32%)Rejected-Finance | L2 | Rejected-Finance BIDDER REJECTED DUE TO HIGHER BID VALUE | |
| 3 | L3₹51.1 L+₹2.1 L (4.39%)Rejected-Finance | L3 | Rejected-Finance BIDDER REJECTED DUE TO HIGHER BID VALUE | |
| 4 | L4₹51.2 L+₹2.3 L (4.60%)Rejected-Finance P O P S THRIZINO WEST KAMENG A P PIN 790 002 | WEST KAMENG | ARUNACHAL PRADESH | 790002 | L4 | Rejected-Finance BIDDER REJECTED DUE TO HIGHER BID VALUE | |
| 5 | L5₹51.2 L+₹2.3 L (4.62%)Rejected-Finance | L5 | Rejected-Finance BIDDER REJECTED DUE TO HIGHER BID VALUE |
Tender Value
₹47.5 L
EMD Value
₹95,000
Closing Date
25 Aug 2022, 3:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
LT COL VASEEM HIROLI
GE 859 EWS, PIN - 913859, C/O 99 APO
SPL REPAIRS TO BLDG NO P/O/12 A TO H AT RUPA WEST ALONGWITH PROVN OF CERTAIN MINOR WORKS AT RUPA AREA OF AGE B/R II AND AGE E/M UNDER GE 859 EWS
2022_MES_543457_1
8353/E8
Open Tender
Civil Works
Item Rate
180 days
TENGA VALLEY
AS PER TENDER DOCUMENTS
7 documents required · 7 mandatory
₹500
GE 859 EWS
₹95,000
Yes
13 Dec 2022
4 Aug 2022
26 Aug 2022
4 Aug 2022
25 Aug 2022
18 Aug 2022
Amount
Demolition of cement concrete(unreinforced) in ground floors n.exc 15 cm thickness (below or above ground level) complete all as specified and directed.
Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for (reinforced cut as required to facilitate demolition) complete all as specified and directed.
M&L for Providing, cement concrete type B1 (1:2:4) using 20 mm graded aggregate in roof kerbs or mud stops, rounded or chamfered on edges
S & F Machine pressed pre cast concrete 60mm thick interlocking tiles with grey cement and pigment of any shape and size , M-35 grade, laid over sand bedding complete all as specified.
M & L Sand filling under floors or in foundations including watering and consolidation
Taking down cement plaster on brick, concrete block wall or stone walls, etc., including raking out joints,hacking for key,scrubbing down with water etc compleate all as specified and directed.
Material and labour for 10 mm thick rendering in cement mortar (1:6) on brick or concrete wall surfaces finished even & smooth without using extra cement compleate all as specified and directed.
Material and labour for 15 mm thick rendering in cement mortar (1:4) on brick or concrete wall surfaces complete all as specified and directed.
M & L for green Marble work 18 to 20mm thick (table rubbed and polished) in steps, jambs, pillars, windowcills, cooking platforms, floor and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble all as specified and as directed.
Material and labour for 75mm thick PCC 1:3:6 type C2 using 20 mm graded stone aggregate as in plinth protection/hard standing including finished surface finished even and smooth without using extra cement complete all as specified and directed.
Material and labour for plain cement concrete (1:3:6) type C1 (using 20mm graded crushed stone aggregate) as in surface channels and drains including necessary form work complete all as specified and directed.
Extra for forming fair finishing drain or channels 30 cm inner girth in cement concrete using extra cement including forms, moulds stopped ends etc complete all as specified and directed.
Material and labour for formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work, not exc 200mm thick (Horizontal or sloping) for fair finished flat surfaces of concrete.
Supply and fix Mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia., or securing with clips complete all as specified and directed.
Material and Labour for reinforced Cement Concrete 1:2:4 (using 20 mm graded crushed stone aggregate) type B1, as in slabs supported on walls, beams and columns, in floors, roofs, landing and in shelves, chajjas etc including removing rubbish off the premises complete all as specified and directed.
Material and Labour for dismantling of existing water closet after disconnecting the flush pipe, demolition of entire floor up to bottom of sunken portion, removing of debries, cleaning the top of RCC slab in sunken portion including pheripheral surfaces and plastered with 10mm thick cement & sand mortor (1:3) using WPC finished even and smooth w/o using extra cement cured properly and allowed to dry and applying two or more coats of epoxy resin/polymer modified cementatious coating like brush bond of Fosroc or equivalent both on floor and wall surfaces applied all as per manufactureres instructions and plastering the treated surfaces(after testing for water tightness) 15mm thick with CM 1:3 with WPC including providing 20mm dia GI spout with 300mm projection beyond outer face of wall complete all as specified and directed.
Supply and Fix plate rack made of stainless steel 0.50mm thick,over all size 762mm(H) x 787mm (W)x254mm(D) complete all as specified and directed.
M & L for 350x250x7 mm/450 x 350 x7 mm thick glazed coloured ceramic tiles on vertical surface of wall including 10mm thick rendering in CM 1:4 on fair faces of brick work or concrete surfaces finished rough to receive tiles etc. set and jointed in neat cement slurry and pointed in white/coloured cement to match the shade. Note :- Colour and pattern will be decided by GE/Engr-in-charge. Contractor will bought the tiles only after approval of colour and pattern of tile by GE/Engr-in-charge.
M&L non - skid Ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors including 15 mm thick screed bed in CM 1:6 for laying floor tiles. etc.set and jointed in neat cement slurry and pointed in white or coloured cement to match Note :- Colour and pattern will be decided by GE/Engr-in-charge. Contractor will bought the tiles only after approval of colour and pattern of tile by GE/Engr-in-charge.
All as per item no 19 above but in vertical surfaces such as skirting/dado etc over and including 10 mm thick plaster in CM 1:4.
Material and labour for Non-skid ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floor including 15 mm thick screed bed in CM 1:6 set and jointed in neat cement slurry and pointed in white/coloured cement to match the shade complete all as specified and directed. Note :- Colour and pattern will be decided by GE/Engr-in-charge. Contractor will bought the tiles only after approval of colour and pattern of tile by GE/Engr-in-charge.
Material and labour for Non-skid ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each not exceeding 0.11 sqm, in floor including 15 mm thick screed bed in CM 1:6 set and jointed in neat cement slurry and pointed in white/coloured cement to match the shade complete all as specified and directed. Note :- Colour and pattern will be decided by GE/Engr-in-charge. Contractor will bought the tiles only after approval of colour and pattern of tile by GE/Engr-in-charge.
Demolition of AC/PVC pipes 100/75mm dia complete all as specified and directed.
Supply and fix PVC (SWR) pipes single socketed 110 mm dia in any length with rubber ring joints fixed to walls complete all as specified and directed.
Supply and fix PVC (SWR) pipes single socketed 75 mm dia in any length with rubber ring joints fixed to walls complete all as specified and directed.
Supply and fix in rerpair 110mm bore PVC (SWR) junction single , (single T) equal or unequal with access door complete all as specified and directed.
Supply and fix in rerpair 75 mm dia. PVC (SWR) bends any radius, with access door complete all as specified and directed.
Supply & fix in rerpair PVC (SWR) vent cowl 75 mm dia complete all as specified and directed.
Supply & fix in rerpair PVC reducer 110mm to 75mm dia complete all as specified and directed.
Supply and fix in repair PVC (SWR) floor trap, 75mm dia outlet, plain with grating including jointing with solvent cement complete all as specified and directed.
Material and labour applying for two coat of cement based paint over a coat of chalk whiting on new plastered surfaces including preparation of new wall surface complete all as specified and directed.
M&L Preparing new plastered surface of wall applying two coats of distemper oil emultion over a coat of cement primer, complete all as specified and as directed.
Material and labour for 5 mm thick rendering in cement mortar (1:4) on concrete surfaces of ceiling, finished even and smooth without using extra cement complete all as specified and directed.
Preparing newly plastered surfaces of ceilings and applying three coats of white wash complete all as specified and directed.
Taking down of existing tarfelt/membrane and bituminous compounds in roof of any description from roof or terracing, roughening surfaces of old concrete surface by picking, sweeping, clean and washing down with water to remove dust etc.
M & L for cement concrete type B-1, 1:2:4 (20mm graded agg) in roof kerbs or mud stops, levelling course/ roof pedding, surface finished even and smooth without using extra cement.
M & L for Rendering 15 mm thick plaster in CM 1:4 on fair faces of brick work or concrete surfaces finished even and smooth using extra cement and and intigiral liquid water proofing compound complete all as specified and directed. (Water proofing compound will be measured and paid sepreatly).
Supply only liquid water proofing compound Dr Fixit LW plus or equivellent as per manufacturar instructions.
M & L for SmartCare Damp Proof fiber reinforced elastomeric liquid applied water proofing membraneone coating of Asian paint or eveivlent in fosroc/STP in horizental roof surfaces, complete all as per manufacturar instruction and as directed by engr-in-charge.
Taking down chowkhat with shutter (without taking off shutter from the frame) area exceeding 1.5 sqm but not exceeding 4.00 sqm complete all as specified and directed.
Taking down chowkhat with shutter (without taking off shutter from the frame) area n. exceeding 1.5 sqm complete all as specified and directed.
Taking down shutters of any description not exceeding 1.00 sqm sqm each including iron mongries complete all as specified and directed.
Supply and fix 2nd class hard wood plain solid straight chowkats and frames, wrought, framed rebated on the solid rounded or chamfered, put together with glue pinned at joints complete all as specified and directed.
Supply and fix solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling and fixing in opening as per specification & drawing.
Supply and fix in rerpair factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top and bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side and as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles and rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing.
Supply and fix in rerpair 2nd class hard wood plain framed panelled shutters 35 mm thick (any number of panels) with panels of timber flat on both sides, feather edged or of veneered particle board medium density, wood particle board with commercial face veneer complete all as specified and directed.
Supply and fixing in rerpair 35 mm thick 2nd class hard wood glazed and skeleton shutters open rebated and prepared to receive glass, gauze etc but divided into squares, edges of framing plain, chamfered or rounded, fitted with cut and mitred beads etc complete all as specified and directed.
Supply and fixing in rerpair 30 mm thick 2nd class hard wood glazed and skeleton shutters open rebated and prepared to receive glass, gauze etc but divided into squares, edges of framing plain, chamfered or rounded, fitted with cut and mitred beads etc complete all as specified and directed.
Material and labour for preparation of new wooden or wood based material over 10 cm in width or girth and applying two coat of synthetic enamel paint over a coat of pink primer complete all as specified and directed.
Supply and fix 100 mm size mild steel butt hinges medium weight cold rolled and fixed complete all as specified and directed.
Supply and fix 75 mm size mild steel butt hinges medium weight cold rolled and fixed complete all as specified and directed.
Supply and fix Aluminium anodised barrel tower bolts 150 mm long of extruded section and fixed complete all as specified and directed
Supply and fix Aluminium anodised barrel tower bolts 125 mm long of extruded section and fixed complete all as specified and directed.
Supply and fix 150 mm size extruded aluminium alloy handles, fabricated type anodised complete all as specified and directed.
Supply and fix 125 mm size extruded aluminium alloy handles, fabricated type anodised complete all as specified and directed.
Supply and fix aluminium alloy, anodised, sliding door bolts 300 mm size with hasp, staple (bolt type) and fixing clips of sheets, cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast aluminium alloy and fixed complete all as specified and directed.
Supply and fix 4 mm thick Sheet glass, ordinary quality and glazing with oil putty in squares n exc 0.5 Sq.m in each pane complete all as specified and directed.
Supply and fix 4 mm thick frosted glass, ordinary quality and glazing with oil putty in squares n exc 0.5 Sq.m in each pane including oil putty and bedding complete fitting complete all as specified and directed.
Supply and fixing MS window guard bars, window frames etc articles confirming to Fe 290-0 or Grade -E complete all as specified and directed.
Supply and fix Chromium plated curtain rod of medium weight and fixing brackets and decorative end supports etc complete all as specified and directed
S&F 18/19 mm MDF DWR prelaminated particale board ,interior grade , prelaminated one side with decorative choice lamination & other side balancing white lamination with teak wood lipping ,fixed with screws to timber frame work complete all as specified and directed.
M&L 2nd class hard wood in scantling clean swan timber fixed as directed.
Supply and fixing continuous hinges (Piano) hinges,30mm brass,brighgt finish or electro galvanised complete all as specified and directed.
M & L for Ball catches with 8mm dia steel ball, and brass body and striking plate including letting in and fixed all as specified and directed.
M & L for Extruded brass handles, fabricated type polished of size 100mm complete all as specified and directed.
Supply and fix galvanised mild steel wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks etc complete all as specified and directed.
S & F in repairs chromium plated 15mm dia angular stop cock single way Make: Essco, Cat Part No. -APR-101053 and equlant model in Jaquar/Roca/Kohler. all as specified and directed.
S & F in repairs chromium plated 15mm dia concealed stop cock single way Make: Essco, Cat Part No. -MQT-514CKN and equlant model in Jaquar/Roca/Kohler. all as specified and directed.
S & F in repairs chromium plated 15mm dia pillar cock single way Make: Essco, Cat Part No. -COS-103001M and equlant model in Jaquar/Roca/Kohler. all as specified and directed.
Supply and fix in repair vitreous china squatting pan 'Orissa pattern' size 580x440 mm white, with 'P' or 'S' trap front and back inlet with integral foot rests excluding flushing cistern and flush pipe including provision of lime concrete bedding and making good to floor complete all as specified and directed.
Supply and Fix in repairs 10 ltrs capacity PVC valveless syphonic action type flushing cistern, low level, white with inlet ball valve, float and handle including brackets etc complete all as specified and directed.
Supply and fix in repairs vitreous china wash hand basin white flat back of size 550mmx400 mm including 40 mm dia medium grade down take waste pipe and CI brackets complete all as specified and directed.
Supply and fix Waste coupling of PTMT (half or full threaded) .(Minimum weight 60 gms complete all as specified and directed.
Supply and fix PVC connection 15mm dia 450 mm long with brass check nuts and washers complete all as specified and directed.
Taking up or down 20 mm bore steel tubing and connections including cleaning for re-fixing or removal to store all as specified and directed.
Supply and fixing in repairs 15 mm bore steel water tubes, medium grade, galvanised with all fittings and fixed complete to walls/ceilings or laid in trenches complete all as specified and directed.
Supply and fixing in repairs 20 mm bore steel water tubes, medium grade, galvanised with all fittings and fixed complete to walls/ceilings or laid in trenches complete all as specified and directed.
S&F in Gun metal 20mm bore globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed.
Dismantling of water tanks exceeding 250 ltrs and not exceeding 500 ltrs capacity complete all as specified and directed.
Disconnecting existing water tanks, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and refixing in position of capacity exc 250 litres & not exc 500 litres.
S & F in repair PVC water storage tanks of 500 ltrs rotational moulded (multi layered cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I complete all as specified and directed.
S & F in repair ball brass valves, high pressure, with polyethene float and flynut complete screwed for iron pipe of 20 mm dia complete all as specified and directed.
S & F in repairs chromium plated fancy type 15mm dia bib tap, Make: Essco, Cat Part No. - COS-103037 and equlant model in Jaquar/Roca/Kohler all as specified and directed.
S & F in repair overhead shower rose with Rubit cleaning system with shower arm and flange suitable for 15mm bore GI tubing Make: Essco, Cat Part No. - EOS-542A and equlant model in Jaquar/Roca/Kohler. all as specified and directed.
S&F in repairs Brass Chromium plated Tubular Towel Rail, 20mm dia, D-type, 60 Cm long between Flanges with Bracket (one Pair) and fixed, complete all as specified and as directed,
S & F in repair sinks made of stainless steel with drainage board 1 mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to drarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x160mm.
Demolition of precast cement concrete articles and precast concrete block walling built in cement mortar compleate all as specified and directed.
Material and labour for pre cast cement concrete 1:3:6 type C1 (20 mm graded aggregate) precast cement concrete block masonry with solid blocks exc 10 cm in width and setting in CM 1:6 etc complete all as specified and directed.
Preparing newly plastered surfaces of wall and applying three coats of white wash complete all as specified and directed.
Material and labour for Preparing previously treated plastered surfaces of walls and applying one coat of white wash complete all as specified and directed.
Material and labour for Preparing previously treated plastered surfaces of ceiling and applying one coat of white wash complete all as specified and directed.
Material and labour for complete removal existing surfaces and preparation of old distempered surface of wall incl washing down and stoping of distempered surface and appliying two coat of distemper oil emulsion over a coat of wall care putty all as specified and directed.
Material and labour for complete removal existing surfaces and preparation of old painted surface of wall incl washing down and stoping of applying two coat of cement base paint (colour and tint as approved) on walls etc all as specified and directed
S&F Stainless Steel Kitchen Plate Rack Stand of size 24" x 30" x 10" product No SSKPR - 311 of Make Bluestar and equivlent models in diamond/Nirali.
Surface excavation not exc 30 cm deep and averaging 15 cm deep and getting out in hard /dense soil complete all as specified and directed.
M & L for Hardcore of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and directed.
M&L for 100 mm thick PCC 1:4:8 type D2 (using 40mm graded stone aggregate) as in sub base, including necessary formwork complete all as specified and directed.
M&L for PCC 1:4:8 type D2 (using 40mm graded stone aggregate) as in foundation filling or mass concrete complete all as specified and directed.
Removal of surplus soil of distance not exceeding 50 Metre and depositing where directed at a level not exceeding 1.5 Metre above the starting point complete all as specified and directed.
M&L for screed bed or bedding layer of mortar 25mm thick for laying floor finishes in CM 1:6 finished rough.
M&L for chequered cement concrete tiles 200x200x25mm etc set and jointed and pointed in neat cement slurry in floor with grey cement and pigment complete as specified and directed.
Material and labour for granite 20 mm thick machine cut, bedded and jointed with grey cement slurry and pointed in white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete all as specified and directed. Note : Screed Bed shall be measured and paid separately.
Excavation in trenches not exc 1.5 m in width and 1.5m in depth and getting out in hard/ dense soil complete all as specified and directed.
Returning filling in, including spreading leveling watering and well ramming in layers not exceeding 25 cm thick, in any type of soil complete all as specified and directed.
Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out in soft/ disintegrated rocks, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, complete all as specified and directed.
M&L for rolled MS stairs (framed) incl stringers, treads, landing, balusters, hand rails etc. incl cleats, bracked etc.
M&L for Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter.
M & L for applying two coats of synthetic enamel paint over a coat of red oxide primer to steel and iron surfaces of any description over 10 cm in width or girth not otherwise described including preparation of new steel surfaces.
Taking down carefully copper/aluminum point wiring (light, fan, socket or power) complete including all fittings and fixtures such as switches, pendant, lamp holder, regulators, switch socket outlet, bulk head fittings, tube light fittings etc and removing unserviceable materials from site of work and making good disturbed surfaces of walls, floors with cement mortar and white/colour wash to match with existing surfaces etc complete all as specified and directed.
M&L for point wiring with PVC insulated unsheathed stranded copper conductor, FRLS grade of size 1.5sqmm in and including PVC casing capping of required size surface type with all accessories including PVC for housing /mounting brackets, switches, sockets etc including 1.5sqmm PVC insulated unsheathed stranded copper conductor 1100 volts grade green in colour as earth continuity for one light/ fan point controlled by one switch all as specified and directed.
All as per item No 111 here-in-before but for one 3 Pin 5 Amp switch outlet controled by one switch on the independent board complete all as specified and directed.
All as per item No 111 here-in-before but for one 3 Pin 5 Amp switch outlet controled by one switch on the same board complete all as specified and directed.
All as per item No 111 here-in-before but for 3 pin 15 Amps socket outlet independant board drawn from DB and including PVC insulated multi stranded copper conductor 4.0 sqmm 1100 volts FRLS grade and earth continuity wire 4.0 sqmm PVC insulated copper wire (Green) FRLS grade including PVC casing and capping complete all as specified and directed.
Supply and fix switch piano flush type single pole one way 5 Amp 240 volts complete all as specified and directed.
Supply and fix switch socket combination 3 Pin, 5 Amp, 240 volts complete all as specified and directed.
Supply and fix switch socket combination 5 Pin, 15 Amp, 240 volts complete all as specified and directed.
S&F Bell push, flush type, 5 A, 240 V.
S&F Bell electric AC, 240 V, single pole.
S&F ceiling rose surface bakelite 65 x 50 mm two to three terminals complete all as specified and directed.
Supply and fix lamp holder, insulated body, with back plate for angular batten fittings complete all as specified and directed.
S&F Regal Batten for LED Tube, universal batten for G 13, T8 lamps complete with all accssories internally pre wired and incl connecting up to ceiling rose with 0.5 sqmm twin core copper flexible conductor cable including Photon Ultra Plus LED Tubelight 20 Watt (Single Side Connection) Ultra bright LED polycarbonate Tubelight with 10% THD with very high efficiency suitable for intalltion in T8 Tubelinght with G 13 lamp holders to give glare free light with integrated electronic driver and mounting casing box 2 Nos including taking down unserviceable one complete all as specified and directed. Make: Crompton Greaves Cat Part No IGP161LT-8-16 & LTT8-20 or equivalent in Phillips/Bajaj/Havells
S&F environmental friendly, ultra modern, energy saving, surface mounted decorative hexagon LED bulk head 10W including connecting up to ceiling rose with 0.5 sqmm two core copper flexible conductor cable including taking down unserviceable one complete all as specified and directed. Make : Crompton Greaves - Cat Part No LBHP-10-CDL or equivalent in Philips / Bajaj / Havells
S&F LED lamp 15 watt, CDL, B-22 cap, (Pin type), 230V, PF not less than 0.85 (min) including taking down unserviceable one complete all as specified and directed . Make - CG/Havells/Philips/Bajaj
S&F MCB DB CRCA sheet powder coated SPN 8 way double door factory made suitable for incorporating MCB as out going connecting incoming and outgoing cables fixed on suitable size of PVC board incl taking out existing unsv DB of any size and making good disturbed surface to match with existing complete all as specified and as directed. Make: Havells/L&T/ABB/Schneider/Legrand
S&F MCB single pole having braking capacity 10 KA, 6 to 32 Amps 240 volts including taking down unserviceable complete all as specified and as directed. Make : Havells/L&T/ABB/Schneider/Legrand
S&F MCB SPN having braking capacity 10 KA. 35 to 60 Amp, 240 volts C curve including taking down unserviceable complete all as specified and as directed. Make : Havells/L&T/ABB/Schneider/Legrand
Supply and fix sub main wiring with two single runs of single core 6 Sqmm PVC insulated and unsheathed cable with multi stranded copper conductor FRLS grade on surface or recessed or drawn in PVC casing capping along with 6.00 Sqmm single core copper conductor multi stranded cable as earth continuity conductor complete all as specified and as directed. (Note: One run of PVC casing capping ,one run of 6 sqmm earth wire and 2 Run of 6 sqmm cable shall be measured as one run.)
S&F MCCB 100 Amps, Four Pole, 16 KA 415 Volt including taking down unserviceable complete all as specified and as directed. Make : Havells/L&T/ABB/Schneider/Legrand
Material & labour for earthing complete with galvanised steel earth plate electrode 600x600x6.3 mm thick buried directly in ground (earth pit not less than 2.25m deep below the ground level) with top edge of the plate not less than 1.5mtr below the normal ground level connected to galvanised earth lead of 25x3 mm dia GI strip by means of bolts, nuts, check nuts and washers of galvanised iron. Earth strip protected by GI pipe 40 mm bore(medium grade) and connected to main switch board or main control board as directed and as specified and as shown in electrical plate No. 3 of SSR Part I (2009) including necessary concrete pit in PCC (1:3:6) type C1, pre-cast RCC (1:2:4) type B1 cover slab 40 cm x 40cm x 5cm reinforced with 8mm dia TMT bars @ 15cm C/C with one handle for lifting made out of 8mm dia bar, funnel, wire mesh, 20mm dia GI pipe medium grade for watering, charcoal or coke and salt in alternate layers including necessary excavation and earth work in any type of soil and testing complete all as directed by Engineer-in-Charge and earth testing on completion.
M/S ASHOK CONSTRUCTION
M/S RARAI ENTERPRISES
M/S KUNKAPU ENTERPRISES
M/S POLAR AGENCIES
M/S SM ANSARI
M/S YOGENDRA CONSTRUCTION CO
M/S MURPHEW ENTERPRISES
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .