Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹29.7 LAccepted-AOC | L1 | Accepted-AOC Being lowest L1 | |
| 2 | L2₹32.6 L+₹2.1 L (6.81%)Rejected-Finance | L2 | Rejected-Finance Other than lowest | |
| 3 | L3₹34.2 L+₹3.7 L (12.2%)Rejected-Finance 1ST FLOOR GURJEET MARKET DHANGU ROAD | L3 | Rejected-Finance Other than lowest | |
| 4 | L4₹37.4 L+₹6.9 L (22.6%)Rejected-Finance | L4 | Rejected-Finance Other than lowest |
Tender Value
₹35 L
EMD Value
₹70,000
Closing Date
30 Jun 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (AF) PATHANKOT
GE (AF) PATHANKOT-145001
REPAIR TO JOINERY AND PANELING IN TECHNICAL AREA AT AIR FORCE STATION PATHANKOT
2023_MES_602381_1
8422/GE/PAF-20/2023-24
Open Tender
Support/Maintenance Service
Item Rate
180 days
GE (AF) PATHANKOT
As per NIT
8 documents required · 8 mandatory
₹500
GE (AF) PATHANKOT
₹70,000
Yes
7 Aug 2023
9 Jun 2023
3 Jul 2023
9 Jun 2023
30 Jun 2023
16 Jun 2023
Amount
Taking down steel/wooden/PVC door chowkat or frames exc 1.5 Sqm but n exc 4 Sqm each. but with shutters (without taking off shutters from the frames) complete all as specified and directed by Engineer-in-charge.
As per srl item No 1 but n.exc 1.5 Sqm each. but with shutters (without taking off shutters from the frames) complete all as specified and directed by Engineer-in-charge.
Taking down steel/wooden window or ventilators with chowkat or frames n.exc 1.5 Sqm each. but with shutters (without taking off shutters from the frames) complete all as specified and directed by Engineer-in-charge.
Taking down shutter of any discreption exc 1 sqm and n exc 2 sqm each and removing to store complete all as specified and directed by Engineer-in-charge.
Factory made solid PVC door frame of size 50mmx47mm made out of 5mm plain colour sheet reinforcement with MS square tube all as specified, in built fixed to wall with CSK screw 100 mm long, screw holding strength of PVC frame Shall be 200 Kgf ,fixing shall be done with anchor screw ( 150 mm x 8mm) with PVC Nylone SLEEVE fixed with screw complete all as specified and directed by Engineer-in-Charge. NOTE:- During Fixing of chowkhat, surface Shall be make good in plumb with existing finishes like cement plaster ,similar wall tile,floor tile etc and as per site requirement.
Supply and fixing Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing complete all as specified and directed by Engineer-in-charge. NOTE :- All screws shall be self tapping chrome plated
Supply and fixing pressed steel frame made out of MS sheet 1.25mm thick of size 105x60mm for doors/windows with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc etc complete all as specified and directed by Engineer-in-charge. NOTE:- During Fixing of chowkhat, surface Shall be make good in plumb with existing finishes like cement plaster ,similar wall tile,floor tile etc and as per site requirement.
Material and labour PCC type B-0, 1:2:4 (12.5 mm graded crushed stone aggregate) filling in door and frames, any size, single or double rebated, including arrangements complete all as specified and directed by Engineer-in-charge.
Supply and fixing 30 MM thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed by Engineer-in-charge. NOTE :- All screws shall be self tapping chrome plated
Supply and fixing factory made 35mm thick 2nd class hard wood glzed & skeleton door shutters,open rebated and prepared to recive gauge etc(without sash bars) edgs of framing plain, chamfered or etc,size of members of shutters as specified in SSR Pt-I, Sec-8 Clause 8.20 (a) without sash bar etc complete all as specified and directed by Engineer-in-charge.
Supply and fixing powder coated anodised Aluminium alloy sections door with frame weight and necessary arrangements 2.863 Kg/Rm duly fitted with Toughend glass 12 mm on half portion and half portion to be covered with 5 mm thick ACP aluminium alloy handles,Locking arrangement with mortise lock make godrej or equivalent etc. complete all as specified and directed by Engineer-in-charge. Note : Rates include all locking arrangements, handle etc
Supply and fixing for factory made Steel window/ Ventilator 1.25mm thick box type (primer coated) ERW hollow P section of size 60mmx25mm including grill using 10 sqmm bar double rebated both gauge and glass shutter comprised gauged glazed Skelton shutter ERW sec 50mmx20mm and 1mm thick with two open able leaf consisting two Nos sash bar of T Section 20mmx3mm complete welded to frame with one vertical mullion of ERW box type T Section of size 60mmx25mm and 1.25mm thick refer TD Drawing No CEAF/AR-480/2015 Sheet No 2(A)/4 dated 30.12.2015 including following fitting welded to frame shutter : (a) Hold fast,150mm long of 12mmx3mm made to shape O4 Nos per window (b) handle of Z Sec20mmx25mm, 100mm long-per No leaf (c) MS Tower bolt 150mm long-02No per leaf . (d) Z section 20mmx25mm, 100mm long stopper 1 No per leaf. (e) cleat 55mm long of hollow square 15mmx20mmx63mm welded to hinge. 1 No per leaf (f) MS Pintal hinges of size 75mmx12mm. 2 Nos per leaf, (g) Including two coats of synthetic enamel paint complete. (h) Stainless steel wire cloth, 0.25mm to 0.36mm nominal dia of wire & average width of aperture 1.40mm to 2mm &fixed with aluminium wire staples. (j) Glass pane 5 mm thick fixed with MS pin and oil putty. NOTE: During Fixing of window, surface Shall be make good in plumb with existing finishes like cement plaster, similar wall tile,floor tile etc and as per site requirement.cutting holes and good dismantled portion in PCC(1:2:4) type B1.
Supply and fixing Providing and fixing factory made uPVG white colour Sliding window Three track made of extruded profiles with wall thickness of 2.3mm (+ -0.2mm). Window profile with hollow section with multi chamber. Frame (88mm x 52mm), sliding sash (42mm x 67mm). Sliding mesh Sash (42mm x 57mm) Sliding interlock (One vertical length in each shutters) (45.5mm x 28mm), Glazing bead (24.5mm x 16mm) will be miterd cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket, 1.2+ -0.2mm thick galvanised steel Frame (30mm x 18mm) 2 nos, sliding sash (30mm x 18mm), sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, Hardware [Touch Lock of zinc alloyed (white powder coated), steel roller system. Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and required accessories. and of approved quality with 6 mm thick figured glass and ss wire mesh of 0.36 mm nominal dia and average width of aperture 1.40 mm, complete all as specified and directed by Engineer-in-Charge. Note:- The rate shall also include making all damages/plastering repair, leveling and making good in plumb all the cills and jambs of opening before fixing windows and , shall deemed to have been included in the quoted rate and no extra shall be admitted at a laterdate in this respect.
Supply and fixing for Framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed by Engineer-in-charge.
Providing and fixing factory made uPVC white colour casement (Openable) Door made of extruded profile wilh wall thickness of 2.3mm ( + -0.2mm). Window profile with hollow section with mitlti chamber, frame (60mm x 58mm), sash (60mm x 78mm). T profile (Onevertical length in between two shutters) (60mm x 74mm). Glazing bead (35mm x 20mm) will be mitered cut and fusion welded at all corners, including drilling ol holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket 1.2 + -0.2mm thick galvanized steel Frame (28mm x 21.5mm), sash (31mm x 27mm), T profile (27mm x 17mm) to be inserted in required profile, frame will be fixed to the wall wilh 8mm x 100mm long fasteners. Hardware: [casement door handle made of zinc alloyed (white powder coated). Corner striker. Secondary Strikers. Cylinder. Doortransmission gear made of mild sleel with multi point locking system with strikes. SS Hinges heavy duty complete all as specified and directed by Engineer-in-charge.
Preparation of new untreated wooden surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed by Engineer-in-charge.
Preparation of old painted wooden surfaces of any description not otherwise described over 10 cm width or girth and applying one coats of synthetic enamel paint complete all as specified and directed by Engineer-in-charge.
Supply and fixing Stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with tinned tacks or stainless steel wire staples or with second class hard wood beadings complete all as specified and directed by Engineer-in-charge.
Supply and fixing 100 mm butt hinges, medium weight, stainless steel fixed in MS frame or welded with MS angle frame ocomplete all as specified and directed by Engineer-in-charge. NOTE :- All screws shall be self tapping chrome plated and length of screw not less 38 mm
Supply and fixing Aluminium, anodised, barrel tower bolts of extruded section and fixed 150 mm long complete all as specified and directed by Engineer-in-charge.
Supply and fixing Aluminium, anodised, barrel tower bolts of extruded section and fixed 200 mm long complete all as specified and directed by Engineer-in-charge.
Supply and fixing Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed 250 mm long complete all as specified and directed by Engineer-in-charge.
Supply and fixing in Aluminium handles, cast type, anodised 150mm long in complete all as specified and directed by Engineer-in-charge.
Supply and fixing Floor door stopper of aluminium alloy body and tongue, anodised, 140 mm with hard drawn steel spring, fixed in floor complete all as specified and directed by Engineer-in-charge.
Dismantling false ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs any thickness complete all as specified and directed by Engr-in-Charge.
Material and labour Gl frame work for seamless ceiling of grid 600x600 mm centre to centre comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre. and Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long with 9 mm thick ceiling panel laminated with PVC film on front face and foil back available in the drop texture as per IS-2095, part-I 1996 fixed or laid/ inserted to timber/GI/Aluminium framework on flat ceiling complete all as specified and directed by Engineer-in-charge.
Supply and fixing Door closer Aluminum (Extruded section ) Body hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed in repairs complete all as specified and directed by Engineer-in-charge.
Hacking out old broken glass (any thickness, size, quality or description) from metal frame , glazed with putty or fixed with beads complete all as specified and directed by Engineer-in-charge.
Supply and fixing Transparent Fibre Sheet 5 mm thick with oil putty, MS strips, clips and all necessary accessories in window panes of different sizes required at site complete all as specified and directed by Engineer-in-charge.
Taking down carefully (copper/aluminium) point wiring for ceiling fan/light fitting in ceiling/wall and refixing the same in any position including replacing damaged material and lowering/rising the rod of ceiling fan if required complete all as specified and directed by Engineer-in-charge.
Taking down carefully switch boards of any size and any description and boxes of such types on wall and refixing at same place duly modification over PVC panelling including necessary screws, washers, replacement of damage switches etc. complete all as specified and directed by Engineer-in-Charge.
Preparation of new steel surfaces exc 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer upto the height 12 Mtr complete all as specified and directed by Engineer-in-charge.
Providing precast cement concrete Typ B-1 (1:2:4) in window or door cills, lintels, pintle blocks, ancho-rage blocks, bonders (for stone wallin). corbels, brackets, etc. (of any section indicated), with plain fair faces, including chamfers, weatherings, throat- ing etc. and setting in mortar complete with joints to match complete all as specified and directed by Engineer-in-charge.
Dismantling boarding, any description, fixed in any position with nails complete all as specified and directed by Engineer-in-charge.
Supply and fixing 5mm to 6 mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame complete all as specified and directed by Engineer-in-charge.
Supply and fixing 5mm to 6 mm thick Prelam PVC sheet in strips & channel feathered at the edges for fixing on Solid PVC Wall Lining, Insulated PVC Wall Lining, and Solid PVC Partitions inclusive of Solvent Cement and fixing at site complete all as specified and directed by Engineer-in-charge.
Material and labour for 10 mm thick rendering in CM 1:6 on fair faces of brick surfaces complete all as specified and directed by Engineer-in-charge.
Material and labour for applying 3mm thick (*in two coats) wall care putty on Internal wall complete all as specified and directed by Engineer-in-charge.
Preparation of New plastered surfaces by washing, rubbing down and stopping of distempered surfaces and applying two coat of oil emulation distemper on wall etc complete all as specified and directed by Engineer-in-charge.
Material and labour for 15 mm thick rendering in CM 1:4 on fair faces of brick surfaces complete all as specified and directed by Engineer-in-charge.
Preparation of plastered or unplastered surfaces of walls any width or girth etc and applying two coats of exterior weather coat paint in any colour or any camoflague pattern over a coat of primer complete all as specified and directed by Engineer-in-charge.
Demolition of Stone slabs and tiles of any description or thickness in floors, aprons etc. laid bedded and pointed in any motar complete all as specified and directed by Engineer-in-charge.
Supply and fixing Non-skid ceramic tiles 7 to 8mm thick (square / rectangular ) area of each tiles exceeding 0.11 Sqm but not exceeding 0.18 sqm, in floor etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, including 15mm thck screed bed in CM 1:4 complete all as specified and directed by Engineer-in-charge.
Material and labour 15-20mm thick Granite(of any type) work (table rubbed and polished) in window cills / counter for WHB or steel sink after cutting as required size for WHB & Sink set in cement mortar (1:4) including pointing using marble dust with admixture of pigment to match with shade of granite including 20 mm thick screed bed in CM 1:4 complete all as specified and directed by Engineer-in-charge.
JAGDISH SINGH ASSOCIATES
Vijay Kumar Contractor and Engineers
M/S P.S CONSTRUCTION CO
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .