PROVN OF 03 X SNOW AND WEATHER PROTECTION SHEDS FOR TWO PACKAGE TYPE SEWAGE TREATMENT PLANT AT SHARIFABAD MIL STN UNDER AGE (I) CIF (K)

Amount

B/R items :- Excavating in trenches, not exc 1.5 mtr wide and n exc 1.5 mtr in depth, for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. not exc 10 sqm on plan and not exc 1.5 mtr in depth and getting out, complete all as specified and as directed.

Excavating in post holes (or similar holes) each not exc 0.5 cum, getting out, in hard/dense and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, watering and removing surplus soil to a distance not exc 50 mtr and making good surface, complete all as specified and as directed.

M&L for plain cement concrete 1:3:6 type C-2 (using 40mm graded crushed stone aggregate) as in foundation filling and mass concrete etc, complete all as specified and as directed.

M & L PCC 1:4:8 type D-2 (using 40 mm graded crushed stone aggregate) as in foundation and mass concrete, complete all as specified and as directed.

Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams, and similar work; vertical or to batter, complete all as specified and as directed.

Formwork to sides of pillars, posts, struts, piers, columns and stanchions as in Square, rectangular or polygonal to sides of columns, pillars etc, complete all as specified and as directed.

M&L RCC M-25 (using 20 mm graded crushed stone aggregate) (Design Mix) as in foundations, including rafts, footings, foundation beam, plinth beams, bases for columns, etc, basement slabs, under reamed piles and mass concrete complete all as specified and as directed.

M&L for RCC M-25 (using 20 mm graded crushed stone aggregate) (Design mix) as in Columns, pillers, peir, posts, and struts complete all as specified and as directed.

S&F TMT bars 10 mm dia and over, cut to length, bent to shape as required incl cracking bending hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia, complete all as specified and as directed.

All as per ser item No 9.00 here-in-before but 6 to 8mm dia and over upto and including 10mm dia in stirrups, spaces and binders, complete all as specified and as directed.

M&L for roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc, including welding gusset plate, welding at factory or at site fixing over roof beams, conforming to Fe 410-W (Gde E-250) quality-A, complete all as spcified and as directed.

S&F rolled section as in main and cross beams, hip and jack rafters, purlins where connected to common rafters and running rails and guides for sliding doors, fixed with angle cleats or other connecting plates etc confirming to Fe 410-W-(Gde-E-250)quality-A complete all as specified and as directed. Note :- Fabrication of roof truss, purlins post , rafter etc cutting , welding, bending , or any other nature of work shall be at site or shop including in above rate.

S&F mild steel bolts of 16 to 20 mm dia , purpose made, with hexagonal or square head one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, exc 22.5 cm but not exc 30 cm long, complete all as specified and as directed.

S&F Pre-painted galvalum aluminium zinc coating GI based corrugated steel sheet 0.50mm thick (total coated thickness) of any colour having tensile strength of 550 Mpa minimum, yeild strength as in roof covering/clading to wall , it shall be coated with hot dip alloy of 55% aluminimum, 43.5% zinc,1.5% Silicon and finished with resin coat on both surface @ 150 gm/ sqm of coating as specified and shall be fixed with hot dip galvanised, self drilling and self tapping screws neoprened and EDPM washers as in roof covering at site, complete all as specified and as dircted.

S&F Pre-painted galvalum aluminium zinc coating GI based plain steel sheet 0.50mm thick (total coated thickness) of any colour having tensile strength of 550 Mpa minimum, yeild strength as in roof covering/clading to wall , it shall be coated with hot dip alloy of 55% aluminimum, 43.5% zinc,1.5% Silicon and finished with resin coat on both surface @ 150 gm/ sqm of coating as specified and shall be fixed with hot dip galvanised, self drilling and self tapping screws neoprened and EDPM washers as in roof covering at site, complete all as specified and as directed.

M&L for two coats of synthetic enamel painting on new steel Surfaces of any description, over 10cm in width or girth, not otherwise described over a coat of red oxide primer, complete all as specified and as directed.

Surface excavation not exc 30 cm deep and averaging 15cm deep and getting out, complete all as specified and as directed.

M&L for Hardcore of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface, complete all as specified and as directed.

M&L for Plain Cement concrete type B-1, 1:4:8, (using 40mm graded crushed aggregate), 75mm thick as in subbase, complete all as specified and as directed.

M&L for plain cement concrete type B-1, 1:2:4 (using 20mm graded aggregate), 50mm thick as in floors laid in panels, rough finished, finishing cement concrete surface even and smooth with using extra cement, complete all as specified and as directed.

Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade with grey cement and pigment over 25mm thick sand cusion, complete all as specified and as directed.

M&L Sand filling under floors or in foundations including under paver block for cushioning and watering and consolidation complete all as specified and as directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm in soft/loose soil complete all as specified and as directed.

Removing excavated material exc. 250 mtr but not exc. 500 mtr and depositing where directed, complete all as specified and as directed.

E/M items :- M&L for point wiring with 1.5 Sqmm copper conductor (Multistranded) PVC insulated and unsheatheted FRLS electric cable 1100 volts grade wiring in PVC conduit of suitable size with all fittings accessories and including PVC insulated electric cable 1100 volts 1.5 Sqmm (multi stranded) copper conductor single core (Green colour) cable as continious earth wire connected to common earth dolly including sunk sheet terminal box made out of 1.6mm thick MS sheet concealed on wall or on surface as per site requirement and making good distrubed surface of wall, covered with 3 mm thick plastic laminated sheet for one light/Fan point controlled by one switch, 5 Amp one way using cable (1.5 Sqmm for phase and neutral and 1.5 Sqmm earthing), complete all as specified and as directed.

All as per Ser item No 25.00 here-in-before, but for one 5 Amp socket outlet on the independent board.

All as per Ser item No 25.00 here-in-before, but for one socket outlet 15 Amp on the independent board with 2.5 sqmm copper conductor multistranded PVC insulated and sheathed electric cable 1100 Volt grade including PVC insulated and unsheathed electric cable 1100 volt 2.5 Sqmm copper stranded conductor as continious earth wire connected to common earth dolly, complete all as specified and directed.

S&F sheet metal enclosure factory made (double door) shutter type for DB SPN, 240 Volts, 8 ways with 200 Amps rated bus bar, neutral link, earth bar, complete all as specified and directed.

S&F in replacement MCB, SPN 40 to 63 Amps, 10 KA, 240 Volts, complete all as specified and directed.

S&F in replacement MCB, SP 05 to 32 Amps, 10 KA, 240 Volts, complete all as specified and directed.

S&F Switch piano, flush type, 5 Amp, one way, complete all as specified and directed.

S&F socket outlet 2-in-1, 3 pin and 5 Amp, complete all as specified and directed.

S&F switch piano, 15 Amp flush type, complete all as specified and directed.

S&F socket outlet 2 in 1, 5 & 15 Amp flush type, complete all as specified and directed.

S&F ceiling rose 3 terminal size 50 x 65mm surface type, complete all as specified and directed.

Supply and fixing LED lights fitting 1x 18W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose, complete all as specified and as directed.

Supply and fixing LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection, complete all as specified and as directed.

Earthing complete with galvanised steel earth plate electrode of size 60cm x 60cm x 6mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less'than 1.5 metres below normal ground level, connected to galvanised earth lead wire 4.0 mm dia as earth lead upto 7.5 mtr long by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 3, connected to earthing test point all as specified or indicated including testing on completion including earth work and excavation in any type of soil, PCC 1:3:6 type C-1 chamber, precast slab 40mm thick in cement concrete 1:2:4 type B-1 with 8mm dia MS bars reinforced at 10cm centre to centre both ways including funnel with 20mm bore medium frade GI watering pipe, 15mm bore light grade GI pipe, wire mesh and lugs, including testing on completion, complete all as specified and as directed.

M&L in replacement submain wiring of two single core PVC insulated and unsheathed cable with 6 Sqmm FRLS multistandard coper conductor drawing in PVC casing caping/PVC conduit as per site requirement including PVC bend, corner junction etc with 6 Sqmm PVC unsheather copper conductor (multistranded) as continuous earth wire including taking down existing wiring etc, complete all as specified and as directed. Note :- Colour code shall be followed as per IS specification.

M/S SHEIKH FEROOZ AHMAD

JK BUILDERS AND ENGINEERS

M/S BASHIR AND SONS

M/S SYED NOORULLAH RIZVI

M/S SHIMAR STAR GLACIER

M/S SUHEEL CONSTRUCTIONS