ADDN ALTN AND SPL REPAIRS TO OTM ACCN OF INF BN AT GOLCONDA .

Amount

B/R ITEMS

Dismantling of AC sheets / Galvalume sheet / GI Sheet of corrugated or semicorrugated etc. sheets in roof coverings complete all as specified and directed

Dismantling Mangalore pattern roofing tiles complete all as specified and directed by Engr-in-Charge.

Dismantling battens for tiles, shingles etc of any size including tilting fillets n exc 15 cm centre to centre complete all as specified and directed by Engr-in-Charge.

Dismantling of Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and directed

Dismantling of boarding, any description fixed in any position with nails complete all as directed by Engr-in-Charge.

Material and Labour for pre-painted galvalume aluminium zinc coating GI based corrugated mangalore profile sheet 0.50 mm thick of any colour having tensile strength 550 mpa as in roof covering/ cladding to wall, fixed with self tapping screws all as specified and directed.

Material and Labour for pre- painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof overing/ cladding to wall, fixed with self tapping screws complete all as specified and directed

Dismantling wrought iron or mild steel work of any description not otherwise provided for.

Supply and fix for Steel work in tubular trusses & vertical post including special shaped washer etc complete using ERW or induction butt welded tubes conforming to I.S. 1161-1979 grade st-240 all as specified and directed

Supply and fix for MS framed structure roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats of Grade Fe 410 -W (Gde- E- 250) quality- A etc.,complete all as specified and directed

Material and Labour for preparation of new or previously untreated steel surfaces of any description, over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer all as specified and directed.

Supply and fix for mild steel screw bolts of 5 to 10 mm diameter of shank (machine made) with hexagonal or square heads at one end and screwed the other, each screwed end to be fitted with washers and one hexagonal or square nut, length of bolt exc. 10 cm. but not exc 15cm complete complete all as specified and directed

Demolition of brick work or stone/ boulder masonry, built in cement mortar including all quoins, pillars etc.complete all as specified and directed

Material and Labour for brick work with sub-class `B' bricks, straight or curved on plan exceeding 6 M mean radius built in cement mortar 1:6 all as specified and directed

Material and Labour for Brickwork with sub class ‘B’ bricks, straight or curved on plan to any radius half brick thick walls built in cement mortar 1: 4 complete all as specified and directed

Taking down cement plaster on wall of any desdriptions incl racking out joints for key scrubbing with water etc all as specified and directed

Material and Labour for rendering 15mm thick in cement mortor 1:4 on Brick wall surfaces, finished even and smooth without using extra cement with @ at 3% IWPC (IWPC measured separately) all as specified and directed

Material and Labour for rendering 10mm thick in cement mortor 1:6 on Brick wall surfaces, finished even and smooth without using extra cement all as specified and directed

Material and Labour for for two coats of oil bound distemper over a coat of chalk whiting primer on newly plastered surfaces including 1.5mm thick wall care putty on wall including preperation all as specified and directed

M&L for preparing new plastered surfaces and applying Two coats of cement based paint on surfaces of walls all as specified and directed.

Material and Labour for complete removal of existing treatment and applying two coats of oil bound distemper over a coat of chalk whiting primer on old surface of walls including 3mm thick wall care putty on wall complete all as specified and directed.

Material and Labour for complete removal of existing treatment and applying two coats of cement base paint on walls surfaces all as specified and directed. .

Preparation of old painted steel surfaces of any description, over 10 cm width or girth, not otherwise described and applying one coat of synthetic enamel paint all as specified and directed.

Material and Labour for preparation of old painted wood and wood based surfaces of any description, not otherwise described, over 10 cm width or girth and applying one coat of Synthetic enamel paint (Ordinary tint) all as specified and directed.

Dismantling Stone slabs and tiles of any description or thickness in floors,plinth Protection, aprons etc Laid, bed-ded and pointed in any mortar,complete all as specified and as directed.

Demolition of cement concrete (unreinforced) of any description of any position not otherwise specfically provided for all as specified and directed

Material and Labour for Machine cut kota stone slab flooring 20 -25mm thick over & incl cement screed base CM(1:6) 20mm thick laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed

Material and Labour for Machine cut kota stone slab 20 -25mm thick in riser of steps, skirting, dado and pillar laid over & incl cement backing CM(1:4) 10mm thick and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed

Material and Labour for 75mm thick plain cement concrete 1 : 3 :6 Type C2 (using 40mm graded stone aggregate) as in sub base of floors laid in alternative bays including necessary form work all as specified and directed

Material and Labour for 25 mm thick PCC 1:2:4 Type B1 (using 20 mm graded stone aggregate) below tiles for levelling of existing surface complete all as specified and directed by Engineer - in- Charge.

Taking down shutters of any description not exceeding 1 Sq. m each all as specified and directed

Taking down shutters of any description exc. 1.0 Sq.m but not exc. 2.0 Sqm each all as specified and directed

Taking down Chowkats or frames not exceeding 1.5 Sq.m each (Without taking off shutters from the frames) complete all as specified and directed

Supply and fix for glazed/gauzed II class hardwood 30mm thick skelton shutters open rebated and prepared to receive glass, gauze etc divided in to squares with sash bars plain chamferedor rounded, mitred and rebated sash bars complete all as pecified and as directed by Engr-in-Charge.

Supply and fix for 75 mm long medium weight, cold rolled mild steel Butt hinges all as specified and directed

Supply and fix for 125 mm long mild steel wire type I Gate and shutter, hook & eye all as specified and directed

Supply and fix for 100 mm long mild steel barrel tower bolts, stove enamelled black, with bright bolt all as specified and directed

Supply and fix for 125 mm size mild steel pressed handles, oval type, stove enamelled black complete all as specified and as directed by Engr-in-Charge.

Supply and fix stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.4 mm and fixed with wooden beads all as specified and directed

Material and Labour for hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads all as specified and directed

Supply and fix 4 mm thick Sheet glass, ordinary quality and glazing with oil putty or wooden beading in squares not exceeding 0.5 Sq.m in each pane all as specified and directed

Supply and fix 30 mm thick 2nd class hard wood gauzed and skeleton shutters for doors open rebated and prepared to receive glass, gauge etc., divided into square with plain chamfered or rounded mitered and rebated sash bars, any number, edges of framing, plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc, size of members of shutters all as specified in SSR Part-I Section 8 clause 8.24 (a) complete all as specified and as directed.

Dismantling timber scantlings in fillets, rails, post , rafter, purlin etc under 40 Sqcm in section in any position unframed work all as specified and directed

Material and Labour for 2nd Class hardwood plain fillets, square or triangular in section,clean swan, secured with nails or brads croos sectional area exc 6 Sqcm but not exc 13 Sqcm all as specified and directed

Supply and fix 170mm, ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and as directed.

Supply and fix 125 mm long floor door stopper of aluminium alloy body, and tongue, ISI marked, anodised, with hard drawn steel spring, fixed in floor all as specified and as directed

Taking down and removing to or from stores Chowkats or frames exceeding 1.5 Sq. M but not exceeding 4 Sq. M each (Without taking off shutters from the frame) and removing all as specified and directed

Supply and fix Second class hard wood plain, solid, straight chowkats and frames, wrought, framed, rebated on the solid, rounded or chamfered, put together with glue pinned at joints all as specified and directed

Supply and fix 35 mm thick factory made plain, framed, panelled shutters ( two panels), with lock rail and panels of 9mm BWP commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS: 1003 (part-I), kiln seasoned and chemically pressure treated supplied and fitted to chowkats all as specified and directed

Supply and fix mild steel angles, bars, flats etc., as in supports for stiffening of fencing, wall ties, hold fasts, clamps and similar small articles confirming to Fe 410-O 0r Fe 310-O all as specified and directed

Material and Labour for plain Cement Concrete Type C1 1:3:6 (using 20 mm graded granite stone aggregate) cast in situ in lintels up to 1.5 m span, cills and other similar bands, plinth courses, parapets, copings, bed plates and the like including weathering, slightly rounded all as specified and directed

Supply and fix 100 mm long medium weight, cold rolled mild steel Butt hinges all as specified and directed

Supply and fix 150 mm size mild steel pressed handles, oval type, stove enamelled black complete all as specified and as directed by Engr-in-Charge.

Supply and fix 125 mm long mild steel barrel tower bolts, stove enamelled black, with bright bolt all as specified and directed

Supply and fix for 300 mm mild steel sliding door bolts, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate all as specified and directed

Material and Labour for preparation of New or previously untreated wood and wood based surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of Synthetic enamel paint (Ordinary tint) over a coat of Pink primer all as specified and directed.

Supply and fixed in repairs 170mm, ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and as directed.

Supply and fix in repairs 125 mm long floor door stopper of aluminium alloy body, and tongue, ISI marked, anodised, with hard drawn steel spring, fixed in floor all as specified and as directed

Supply and fix in repairs 300 mm mild steel sliding door bolts, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate all as specified and directed

Supply and Fixed in repairs Stainless Steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm fixed with fixed with stainless steel wire staples fixed to frames with and including wooden beadings etc., complete all as specified and as directed.

Dismantling wall and ceiling boards (fibre, pulb, insulation etc) or insulation boards slabs/blankets any thickness including cover fillets all as specified and as directed all as specified and directed

Supply and fix true or horizontal level 600mmx600mm panels, false ceiling, hot dipped galvanised steel sections exposed surface with precoated capping, main tee of size 24x32mm at every 1200mm c/c and cross tee of size 24x27mm (1200mm & 600mm long) at every 600mm c/c and wall angle of size 19x19mm fixed to perimeter wall, as per manufacturer's instructions, grid to be suspended at every 1200mm c/c in both directions by using 3mm dia pre-straightened GI wire at every 1200mm c/c internal at the main tee, including 8 to 9mm thick gypsum board of size 600mm x 600mm with rear side aluminum foil and front side PVC lamination, complete all as specified and directed

Material and Labour for curtain rod 25mm MS decorative type powder coated all as specified in repairs complete all as specified and directed

Material and Labour for 25 mm dia MS brackets to curtain pipe, decorative type powder coated complete all as specified and directed

Material and Labour for fixing anchoring fasteners of 18 mm diameter made up of Galvanised iron (Heavy Duty) in walls/ceiling including cutting holes and fixing with pcc1:2:4 and including match the existing surface with two coats of oil bound distemper for tying up mosquito nets in position complete all as specified and directed by Engr-in-Charge.

Material and Labour for 4.00mm dia mild steel wire, galvanised class 3, in fencing including straining and fixing to wood, concrete or steel posts and/or to straining bolts, including securing with and provision of galvanised iron tying wire, galvanised iron staples or steel pins, etc. as directed (each line of wire to be measured) in detached work such as for mosquito nets and fixing to straining bolts, hooks, eyes, etc.including making good to walls as directed by Engineer-in-charge.

Taking down existing felt, plaster and preparing the surface of roof by cleaning of foreign materials down with water complete all as specified and directed.

Material and Labour for roughening surfaces of old concrete floor or concrete surfaces by picking, sweeping clean and washing down with water to remove dust, etc.and brushing neat cement slurry with 3 Kg., of cement per square metre complete all as specified and directed.

Material and Labour for providing cement concrete type B0 1:2:4 (12.5mm graded stone aggregate) as in padding and benching & filletting with IWPC @ at 3% (IWPC measured and paid seperately)

Material and Labour for rendering 10mm thick on brick work or concrete surfaces in CM 1:4 and finished even and smooth without using extra cement with IWPC @ at 3% (IWPC measured separately) as in roof slabs

'M & L for APP based polymeric membrane minimum weighing 3.5 Kg/Sqm and minimum 3 mm thick reinforced with polyster non wove fabric (weight not less than 150 gms/sqm), 10 cm overlap fused uniformly by LPG torch flame laid over primed surface including bituminous primer conforming to IS-3384 applied @ 0.3 ltrs/sqm by forced application and applying one coat of aluminium paint @ 100 ml/sqm all as specified and directed''

Supply only Integral Liquid Water Proofing Compound conforming to IS:2645-2003 complete all as specified and as directed.

Supply and Fix factory made solid PVC door frame of size 50mm x 47mm made out of 5mm thick single side prelam PVC sheet and edges will be painted to match with prelam sheet, reinforced with 19mm MS square tube of 19 gauge mitred out at two corners and joined by inserting two Nos of 150mm long brackets of 15mm x 15mm MS square tube inside the drilling 100mm long MS screws using PVC fastener as per specification and drawings as shown in SSR Part II of 2010 complete all as specified and as directed.

Supply and Fix factory made solid PVC moulded door shutter with wood free EPS 28 to 30mm thick (stiles) with 2,4,6 raised panel design with 2mm thick Moulded Prelam PVC Sheet on the front face and 2mm Plain colour PVC Sheet on back face, supplying and fixing in frame at site as per specification and drawing shown on SSR Part-II (2020) complete all as directed.

Material and Labour for 100 mm Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21 and fixed to PVC Doors complete all as specified and directed

Material and Labour for 125 mm length of aluminium anodised barrel tower bolts of extruded section and fixed all as specified and directed

Material and Labour for 125 mm length of extruded aluminium alloy handles, fabricated type, anodised all as specified and directed

Material and labour for Mild steel framed work such as gates and grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings, framework of water tanks and similar work conforming to Fe.290, Gde E-165 complete all as specified and as directed.

Material and Labour for MS bands, straps, support or stays for rain water, flat iron for securing wire mesh including cutting to length, drilling hole for fixing bolts, cranking etc. and confirming Fe-290 grade E-165. all as specified and directed

Supply and fix in repairs vitreous china wash down water closet squatting pan, Orissa pattern of size 580x440mm with integral foot rest , colour white with and including P trap, lime concrete bedding and making necessary connection to soil pipes and flushing cistern etc.,complete all as specified and as directed.

Supply and fix PVC valve less, syphonic action type, low level flushing cistern, 10 litre capacity, white, with accessories like inlet, ball valve, float, handle, brackets, PVC flush pipe, over flow pipe etc., including taking down the exiting one complete all as specified and as directed.

Supply and fixed in repairs PVC connection 15mm dia, 45 Cms long with brass ferrules on both ends fixed all as specified and directed

Supply and fixed in repair 15mm bore Bib taps, chromium plated cast copper alloy but fancy type, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed.

Supply and fixed in repairs 15 mm dia fancy type stop valves/ angle cock chromium plated screwed down, high pressure, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed;

Supply and fix in repair 125mm size brass chromium plated shower rose with or without swivel joints including fixing to steel pipe or union fixed complete all as specified and directed.

M&L for 15 mm bore GI Tubing medium grade with all fittings fixed to wall and ceiling in floor complete as specified including taking down existing u/s GI pipe line complete all as specified and directed by Engr-in-Charge.

M&L for 20 mm bore GI Tubing medium grade with all fittings fixed to wall and ceiling in floor complete as specified including taking down existing u/s GI pipe line complete all as specified and directed by Engr-in-Charge.

Material and Labour for 25 mm bore GI Tubing medium grade with all fittings fixed to wall and ceiling in floor complete as specified including taking down existing u/s GI pipe line complete all as specified and directed by Engr-in-Charge.

Material and Labour for 40 mm bore GI Tubing medium grade with all fittings fixed to wall and ceiling in floor complete as specified including taking down existing u/s GI pipe line complete all as specified and directed by Engr-in-Charge.

Supply and Fixed in repairs, 2000 litres capacity Rotational Moulded Polyethylene (HDPE) FDA grade materials water storage tanks, 'ISI' marked, three layered (Cylindrical vertical with closed top) screwed lid type conforming to IS 12701-1996 with manhole lid and suitable locking arrangement including making holes for inlet, outlet, washout and over flow pipes, hoisted and fixed in position as specified in SSR Part -I (2009) complete including removing the existing all as specified and as directed.

Supply and fix in 25 mm Ball brass valves, high pressure, with polythene float and fly-nut complete, screwed for iron pipe or brass ferrule and fixed in repair all as specified and directed.

Supply and fixed in repair 40 mm Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed by Engr-in-Charge..

Supply and fixed in repair 25 mm Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed by Engr-in-Charge..

Supply and fixed in repair 20 mm Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed by Engr-in-Charge..

Supply and fix PVC( SWR ) pipes 110mm dia single socketed , in any lenth with rubber ring joints as rainwater, soil waste and vent pipe (with all fittings) fixed to wall or laid in trenches incl taking down complete all as specified and directed.

Supply and fix PVC( SWR ) pipes 75mm dia single socketed , in any lenth with rubber ring joints as rainwater, soil waste and vent pipe (with all fittings) fixed to wall or laid in trenches incl taking down complete all as specified and directed.

Supply and fix PVC (SWR) branch piece single (single Y) equal or unequal with access door of bore 110mm all as specified and directed

Supply and fix PVC (SWR) bends any radius 110mm bore in repairs all as specified and directed

Supply and fix PVC (SWR) bends with access door any radius 110mm bore in repairs all as specified and directed

Supply and fix PVC(SWR) vent cowl 110mm bore all as specified and directed

Supply and fix PVC (SWR) bends any radious 75 mm dia all as specified and directed

Supply and fix PVC (SWR) junction single (single T) equal or unequal with access door of bore 75mm all as specified and directed

Supply and fix PVC (SWR) branch piece single (single Y) equal or unequal with access door of bore 75mm all as specified and directed

Demolition of Reinforced Cement Concrete of any description and in any position not otherwise specifically provided for and removing rubbish off the premises to out side MD land etc., complete all as specified and as directed.

Material and Labour for Pre Cast Cement Concrete 1:2:4 type B1 (using 20 mm graded aggregate) as in Cover slab for manholes etc set in cement mortor 1:4 including use and waste necessary form work (Reinforced shall be measured and paid seprately) all as specified and directed

Material and Labour forTMT bars, 10mm dia & over , cut ot length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with wire all as specified and directed

Material and Labour for TMT bars,6 to 8mm dia cut ot length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with wire all as specified and directed.

Demolition floor, hearth or wall tiling incl cement mortar bedding (but not backing) and rubbish of the premises complete all as specified and directed

Material and Labour for non skid coloured ceramic floor tiles 7-8 mm thick (square/ rectanglar ) area of each tile exc 0.11 sqm but n. exc 0.18 sqm , set and jointed in neat cement slurry and pointed with white or coloured cement to match including screed bed or bedding layer 15 mm thick CM 1:6 for laying floor finishes complete all as specified and directed

Material and Labour for glazed ceramic coloured tiles of size 350x250x7mm/450x350x7 mm thick for vertical surfaces as in dado/skirtings set and jointed in neat cement slurry and pointed in white or coloured cement to match including 10 mm thick backing coat in CM 1:4 of fair faces of brick work or concrete surface complete all as specified and directed.

Material and Labour for Rendering 5 mm thick in CM 1:3 on fair faces of brick surfaces of ceiling finished the surface fair and even complete all as specified and directed

Material and Labour for Preparation of newly plastered surfaces and applying three coats of white wash on walls complete and all as specified and directed

Material and Labour for Preparing of Old plastered wall surfaces and applying One coat of white wash on walls complete and all as specified and directed

Material and Labour for preparation of newly plastered surfaces and applying Three coats of White wash on Ceiling complete all as specified and directed

Material and Labour for preparation of Old plastered surfaces and applying One coat of White wash on Ceiling complete all as specified and directed

Supply and fixed in Repair 110 mm CP Grating complete all as specified and directed

Supply and fixed in repair for PVC waste pipe for urinal/WHB with complete fitting etc 38 mm dia. 600mm long all as specified and directed

Supply and fix in repair vitreous china urinal, Half stall type, white (excluding flushing cistern & flush pipe & waste pipe) but exncluding waste pipe, complete including providing & fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with screws, pointing around urinal back in cement complete all as specified and directed.

Material and Labour for 75 mm thick PCC 1:3:6 type C2 (Using 40 mm graded granite stone aggregate) as in plinth protection finishd even and smooth with out using extra cement all as specified and directed

Material and Labour for Machine pressed precast concrete interlocking paver block with grey cement and pigment any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade (Note: rate including providing PCC 1:2:4 type B1 to sides of tiles as filleting / support.) all as specified and directed

Material and Labour for salt glazed stoneware drain pipes 150mm dia bore (Grade 'A' pipe) laid in trenches and jointed as specified incl demolition and breaking of same bore drain pipe complete all as specified and directed

Material and Labour for concrete bed to drain pipes 150mm dia using cement concrete 1:3:6 type C2 including packing under and haunching against the sides of pipes after they are laid and tested in complete all as specified and directed.

Excavation in trenches n.exc 1.5m wide & n.exc 1.5m depth for fdn etc or for shafts, wells, cesspits, manholes, pier holes etc n.exc 10 sqm on plan and n.exc 1.5 m in depth and getting out in hard and dense soil all as specified and directed

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25 cm thick with any type of soil all as specified and directed.

Removing excavated surplus soil n.exc 50m and depositing where directed at a level n.exc 1.5m above the starting point complete all as specified and directed

Material and Labour for reinforced Cement Concrete 1:2:4 type B1 (using 20 mm graded stone aggregate) nominal mix for slabs supported on walls, beams and columns in floors, roofs, landings balconies canopies, desk slabs and in shelves and the like all as specified and directed

Formwork to rough finished surfaces of flat concrete,soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping),etc complete all as spd and directed all as specified and directed

Formwork to,rough finished surfaces of concrete, edges of concrete flats, treads, breaks in floors, window cills, concrete railings,openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/PCC bands in walls, horizontal or sloping and similar work exc 10cm but n exc 20cm wide,etc complete all as specified and directed

Material and Labour for reinforced cement concrete (Nominal mix) type B1 1:2:4 (20 mm graded aggregate) in lintel bands, roof beams and cantilevers etc. all as specified and directed

Use and waste of Form work to sides and soffits of floor or roof beams, lintels, shelves including supports, overhungs etc. for flat rough finished surfaces complete all as specified and directed.

Taking down completely existing treatment along with plaster as in sunken slabs vertical faces all as specified and directed

Material and Labour for 40mm thick cement concrete type B-1, 1:2:4 (20mm graded aggregate) & surface even & smooth using extra cement with IWPC @ at 3% (IWPC measured and paid seperately) as in sunken slabs all as specified and directed

Material and Labour for 85/25 at the rate of 1.2kg/Sqm including cleaning surface complete all as specified and directed

Material and Labour for 15mm thick in CM 1:3 rendering on brick or concrete surfaces finished even and smooth without using extra cement with IWPC @ at 3% (IWPC measured and paid separately) as in sunken slab all as specified and directed

Material and Labour for low density polyethylene pipes (LDPE) of pressure rating 6 Kgf/sqcm fixed to walls, floors etc of 32mm bore as in spouts for sunken slabs all as specified and directed

Material and Labour for cement concrete type E-2, 1:5:10 (40mm graded stone aggregate) as in mass fillings all as specified and directed

Material and Labour for of steel ventilators with top hung shutters glazed and wire gauzed and bottom fixed glazed complete including hings, steel peg stay complete all as specified and directed

Supply and fixed in repairs wash down water closet (pedestal pattern) complete white with plastic water closet seat black closed pattern with flat bottom and cover and mild steel chromium plated or aluminised hinging device and flush pipe of polythelene of low or density or PVC 32mm dia for low level flushing cistern incl pedestal pan and trap, and connection to drain (or outgoing pipe) complete all as specified and directed

Supply and fixed in repair vitreous china wash basin, white, flat back size 550 x 400mm including 01 No cast copper alloy 15mm CP fancy type pillar tap, 01 Nos 32mm waste coupling , one pair of MS bracket, cutting for and pinning in ends of brackets or erecting stand complete all as specified and directed

Supply and fix in repair tubular towel rail 20 mm dia ‘D’ type 60 cm long between flanges of brass chromium plated all as specified and directed

Supply and fix in repair Soap dish, any type, fixed to plugs with chromium plated brass screws complete all as specified and directed.

Supply and fix PVC (SWR) floor trap 75mm dia outlet, plain with grating including jointing with solvent cement in repairs all as specified and directed

Supply and fix PVC (SWR) branch piece double (double Y) equal or unequal with access door of bore 75mm all as specified and directed

Supply and fix PVC (SWR) junction double (double T) equal or unequal with access door of bore 75mm all as specified and directed

Supply and fix PVC (SWR) junction doyble (double Y) equal or unequal with access door of bore 110mm all as specified and directed

Supply and fix PVC (SWR) junction doyble (double T) equal or unequal with access door of bore 110mm all as specified and directed

Supply and fix in repairs health faucet with spray jet (hand shower) cromium plated incl all fitting & fixtures complete all as specified and directed

Supply and fixed in repairs brass CP mixer for mixing hot & cold water screwed down for iron pipe and fixed complete

Supply and fixed in repair two way bib cock/tap 15 mm chromium plated complete fancy type of branded as specified and directed all as specified and directed.

Material and Labour for PCC type D2 1:4:8 (40mm graded Aggr) in foundations, filling and mass Concrete all as specified and directed

Material and Labour for Hard core of guage n.exc 63 mm, deposited, spread and levelled in layers n.exc 15 cm thick, watered and rammed to a true surface

Excavating post holes or similar holes, each not exceeding 0.5 Cum, getting out in Hard/ Dense soil, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, watering, and removing surplus soil all as specified and directed

Material and Labour for M sand filling under floors or in foundations including watering and consolidation all as specified and directed

E/M PORTIONS Earthing complete with galvanized steel earth plate electrode 60cmx60cmx6mm thick buried directly in ground (earth pit not less than 2.25 mtr below ground level) with top edge of the plate not less 1.5 mtrs below normal ground level connected to galvanized earth lead wire 4mm dia by means of bolts,nuts,check nuts and washers of galvanized iron of steel all as shown in electrical plate No.3 connected to Earthing test C1 using 20mm graded stone aggregate for earth chamber provn of PCC cover 40 mm thick 1:2:4 using 20 mm stone aggregate type B1 funnel with water pipe, GI pipe, 50mm dia medium grade protection pipe including dismantling of existing unserviceable earth pit and neccessary excavation and earth work in any type of soil etc,complete all as specified and directed

Supply,laying and testing XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 10 sq. mm,4 Core complete all as specified and directed

All as per Item No.156 Above but of cross- sectional area 10 Sqmm,2 Core complete all as specified and directed

Excavation in trenches not exceeding 1.5 mtr wide and not exceeding 1.5 mtr depth for laying of cables, laying of poles in trenches and getting out in hard/dense soil complete all as directed and specified.

Returning, filling including spreading, levelling, watering and well ramming in layers not exceeding 25 cms thick complete all as all as specified and directed.

Removal of surplus soil to a distance no exceeding 50 mtrs and depositing where directed at a lvevel not exceeding 1.5 mtrs above from the starting point complete all as all as specified and directed.

Supply and spread approved dry M sand for cable laying /foundations/Cable duct including watering and consolidation, cushioning of cable laid in trenches complete all as all as specified and directed. Note:- Punned thickness will be measured for payment purpose

Material and Labour for brick protection with common burnt bricks sub class ‘B’ of size 230 x 115 x 75mm for cable protection complete all as specified and directed.

Material and Labour for cutting of road, hard standing made of concrete or premix carpet, WBM, soiling and morrum filling including excavation for laying of cable/pipe all as directed and making good the road/hard standing by using all old/new materials and with PCC (1:2:4) etc, required to match with the existing surface complete all as specified and directed.

Supply and Fix , 'light grade' tube galvanized 40mm dia,with all fitting and fixed complete to walls and ceilings or laid in floors all as specified and directed

Supply, installation, test and commissioning CPRI APPROVED factory fabricated, outdoor type, LT Feeder Piller Box made out of 3.15mm thick CRCA sheet of size 1M x 0.75M x 0.35M with projected globe roof for rainwater protection dust and vermin proof, double door with bothe side opening including neoprene rubber gasket, suitable for 440 Volt 3 Phase 4 Wire System, including danger plate, earthing strip point and ventilation louvers at rear side, bottom detachable gland plate complete with suitable size zinc cromium plated nuts, bolts and washers etc. and embeded with 50x50x6mm mild steel angle iron frame and 600mm above the normal ground level complete with internal connection with suitable size of cable, cable lugs and cable glands, PCC foundation in cement concrete 1:3:6 (20mm graded stone aggregate) and testing after installation complete all as specified and comprising of the following :- (a) Aluminium busbar 200 amps - 04 Nos, supported with suitable size of heavy duty porcelin stand lock with suitable size of brass nut, bolts and washer with heat shrinkable PVC sleeving. The bar shall be colour coded (red, yellow and blue) for three phases and black for neutral. (b) MCCB 63 Amps, 415 volt, 16 KA breaking capacity 4 pole electromagnetic release duly connected to busbar as incoming - 01 No. Make : Legrand/L&T/C&S/Hagar.

Material and labour for Earthing complete with galvanized steel earth plate electrode of size 600mm x 600mm, 6.0mm thick burried directly in ground (earth pit not less than 2.25m deep below normal ground level) with top edge of plate not less than 1.5m below normal ground level, surrounded from all sides by 15 cm thick packed layer of charcoal dust and common salt, filling in alternate layer and earth plate connected to galvanized iron strip 32x6 mm as earthing conductor by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No.3 of MES Schedule (Part I) (2009) connected to earth test point/ main switch/ DB/ Panel board all as specified including testing on completion with and including 15mm bore medium grade GI protection pipe upto 7.5 meter long for GI earth wire including PCC (1:3:6), type C-1 pit with 40mm thick precast RCC (1:2:4), type B -1 cover reinforced with 12mm dia MS bars @ 150 mm c/c both ways with lifting hooks made out of 12mm dia MS bars, wire mesh funnel with watering pipe 20mm dia medium grade, as specified including dismantling of existing unserviceable earth pit and necessary excavation and earth work in any type of soil etc., complete all as specified and as directed.

Supply and FIx Earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/pipe or fixed to poles or any other indicated situation for loop earthing etc. as required of size 32 x 6mm galvanized iron strip complete all as specified and directed

Taking down carefully existing point wiring of any description for (light, fan ,sockets bells etc) complete including fittings such as sunken boxes, switches, sockets, ceiling rose, lamp holders, brackets ,fittings, pendants, fan regulartors etc and making good the disturbed surface of walls, floors etc. all as specified and directed.

Taking down existing sub main wiring /Service wire of any description and size including earth wire, batten, conduits and making good the disturbed surfaces of walls, floors etc.

Material and Labour for Point wiring for one light point/fan point/bell point controlled by one switch with 1.5 sqmm multistrand copper conductor cable PVC (FRLS) insulated unsheathed copper conductor single core multi stand flexible cable and 1.50 sqmm PVC (FRLS) insulated unsheathed copper conductor single core cable ( green colour) as earth lead in and including PVC rigid conduit with all fittings for concealed type on stone / brick, masonary walls, roof etc including new CI/MS sunken box of required size and all as directed by Engineer-in-Charge & 3 mm thick plastic laminated sheet for housing switches sockets, regulators etc. including cutting/running chases, pinning in and making good the disturbed surfaces to match with the existing specification, complete all as specified and directed

All as per item no.170 but One 5 pin 5/6 Amps switch socket outlet on independent board complete all as specified and directed by the Engr-in-charge.

All as per item no.170 but One 5 pin 5/6 Amps switch socket outlet on same board complete all as specified and directed by the Engr-in-charge.

All as per item no.170 but for One 5 pin 15 / 16 Amps switch socket outlet point on independent board with 2.5 sqmm PVC (FRLS) insulated unsheathed copper conductor single core multi stand flexible cable and 2.5 sqmm PVC (FRLS) insulated unsheathed copper conductor single core cable (green colour) as earth lead complete all as specified and directed by the Engr-in-charge.

Material and Labour for providing point wiring with 1.5 sq. mm (nominal area) single core PVC insulated FRLS unsheathed multi-stranded copper conductor cable (maintaining colour code), 1100 volts grade in and including non metalic rigid PVC conduit medium grade with appropriate size with all fittings (ISI Marked) suitable for concealed wiring on stone/brick, masonary walls, roof etc including modular sunken box of adequate size with suitable modular plate cover for mounting modular switches, sockets, regulators, light fittings etc. complete with all fittings and accessories fixed to wall/ ceiling for one light/ fan /bell point controlled by one oneway modular switches including one run 1.5 sqmm (nominal area) PVC insulated FRLS unsheathed multi-stranded copper conductor cable green in colour for earth continuity conductor connected to common earth dolly including cutting/running chases, pinning in and making good the disturbed surfaces to match with the existing specification, complete all as specified & directed .

All as per Item No.174 above but one 5 Amps 3/5 pin modular socket outlet on independent board complete all as specified and as directed at site.

All as per Item No.174 above but for one 3/5 pin 5/6 Amps modular socket outlet point on same board with other switches complete all as specified and as directed at site.

All as per Item No:174 but for One 3 pin 15 / 16 Amps modular switch socket outlet point on independent board with 2.5 sqmm PVC (FRLS) insulated unsheathed copper conductor single core multi stand flexible cable and 2.5 sqmm PVC (FRLS) insulated unsheathed copper conductor single core cable (green colour) as earth lead complete all as specified and directed at site.

Material and Labour for switch piano flush type single pole one way 5 Amps complete all as specified and directed at site.

Material and Labour for switch socket combination flush type 5 Amps Multipurpose 2 in 1, 3 pin/6 Amp flush type pin with porcelain base complete all as specified and directed at site.

Material and Labour for Switch socket combination 2 in 1 flush type universal 3 pin 6 & 16 Amps flush type complete all as specified and directed at site.

Material and Labour for lamp holder insulated body with back plate suitable for battern fittings complete all as specified and directed at site.

Supply and fix Ceiling rose surface bakelite 65 x 50 mm 2/3 terminals complete all as specified and directed at site.

Material and Labour for Fan Regulator (Rotary step type, Switch/Socket type Dimmer) 230/240V, AC complete all as specified and directed at site.

Supply and fix Modular switch, single pole, one way, 6 Amps one module complete all as specified and as directed.

Supply and fix Modular 6A 3 pin universal socket outlet, 2 module complete all as specified and as directed.

Supply and fix Modular switch, single pole, one way, 16 Amps one module complete all as specified and as directed.

Supply and fix Modular socket outlet 2-in-1, 6/16 Amps, 2 module complete all as specified and as directed.

Supply and fix modular stepped type electronic fan regulator 220 volts, 120Watt 2 module complete all as specified and as directed.

Supply and fix 9 W LED bulb of base B22d with color temp 6500K all as specified and directed.

Supply and fix Single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB 20 Amps, 240 volts all as specified and directed.

Supply and fixing LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and directed..

Supply, fix, test and commissioning of Wall mounted LED batten 20 Watts (1200x108x62mm) in extruded aluminium housing provided for efficient heat dissipation with polycarbonate diffuser and integrated electronic driver complete with all accessories, prewired with and including 4 feet 20Watts LED tube light, 5700K with minimum 2000 lumens all as per Cat No. ENDURALINEARNEOBS20WLED865SPCWH of Havells or techno-commercially equivalent of other specified makes fixed on surfaces of wall or ceiling and connecting of flexible wire twin core from ceiling rose to fitting drawn through and including flexible conduit etc., complete all as specified and as directed.

Supply and fixing LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and directed.

Supply, fix, test and commissioning of 10Watts LED decorative Bulk head light fittings, ultra modern, environmental friendly, energy saving, surface mounted oval bulk head edge-lit LED luminaire 10 Watts comprising of high brightness LEDs with minimum 800 lumens, made of pressure die cast aluminium housing, IP65 protection all as per Cat No.RUGBYNEONFT 10WLED860SSYMTOPC of Havells or techno-commercially equivalent of other specified makes complete with all accessories internally prewired including connecting up with and including twin/three core twisted flexible copper conductor cable of suitable size etc., complete all as specified and as directed.

Supply, fix, test and commissioning of Energy efficient Ceiling fan of 1200mm sweep, five star rating and all accessories, 230 Volts, AC. 50 Hz Single phase with copper winding all as per Cat No.Efficiencia Neo (BLDC 26 W) of Havells or techno-commercially equivalent of other specified makes, fixed to roof/ceiling with suitable clamp and down rod including provisioning of flexible copper cord of size 23/0.0076 of required length from ceiling rose or connector to ceiling fan etc., complete all as specified and as directed .

Supply, install, testing & commissioning of Exhaust fan, metal body with automatic back shutter louvers 300 mm sweep, 1400 RPM or more, Air Delivery not less than 1850 CMH, single phase, 240 Volts, AC, 50 Hz all as per Ventil Air - DB of Havells or techno-commercially equivalent of other specified makes including cutting hole in to the wall / existing window / ventilator etc., and making good the disturbed surfaces and connecting up complete including provision of cable 3/2 core of suitable size from ceiling rose to fan in flexible hose complete all as specified and as directed. Note :- (i) The unit rate quoted shall be deemed to include the cost of making hole in walls/other surfaces, making good the disturbed surfaces including any framework/cement work/wood work/welding work etc. required for proper fixing of the exhaust fan and matching to the existing surface.

Supply, Install, testing and commissioning of Vertical type Storage electric water heater (Geysers) of 25 Ltrs capacity, tank made of ultra thick super cold rolled steel plates with high density PUF insulation, 2 KW, 230 V, Single Phase, 50 Hz, AC, BEE 5 Star rated all as per Cat No: GHWAMGTWH025 (Monza DX) of Havells or techno-commercially equivalent of other specified makes including provision of multifunction safety valve including suitable plug top and grouting and fixing with and including 2 Nos anchor fasteners of size as per manufacturer's instructions, making good the disturbed surface complete and connecting electrical and water supply connection using steel braided hose 2 Nos, testing and commissioning etc.,complete all as specified and as directed. Note: i) Installed Geyser's warranty card should be submitted to the GE duly verified by Engineer-in-Charge before claiming payment for Geysers. ii) CA No. Year and Qtr No. shall be written on the new geysers by Black synthetic enamel paint using stencils or by permanent marker pen and the unit quoted shall be deemed to include the cost of writing these details.

Supply, fix, connecting and testing factory made, distribution board, (MCB DB), IP 43, IK-09, metal double door, SPN, 8 way, 240 Volts, flush type made out of 1.2mm thick CRCA sheet metal, duly powder coated and conforming to IS 8623 fitted with suitable bus bar, neutral links, blanking plate etc., all as per Cat No.DBSPN008DD of L&T or techno-commercially equivalent of other specified makes, concealed and fixed flush to wall and making good the disturbed surfaces complete all as specified and as directed. Note :- The unit rate quoted shall be deemed to include the cost of cutting chases into brick / stone masonry walls for concealing MCB DB and making good the disturbed surfaces with cement work and finishing the surfaces to match with the existing surface.

Supply, fix, connecting and testing factory made, vertical distribution board (MCCB DB), IP 43, IK-09, metal double door, TPN, 4 way, 415 Volts, flush type made out of 1.2mm thick CRCA sheet metal, duly powder coated and conforming to IS 8623 suitable for 3/4 pole MCCBs as incomer, fitted with suitable bus bar, neutral links, blanking plate etc., all as per Cat No.DBVTL004DD of L&T or techno-commercially equivalent of other specified makes, concealed and fixed flush to wall and making good the disturbed surfaces complete all as specified and as directed. Note :- The unit rate quoted shall be deemed to include the cost of cutting chases into walls for concealing MCCB DB and making good the disturbed surfaces with cement work and finishing the surfaces to match with the existing surface.

Supply, fix, connecting and testing MCB, Single Pole Neutral (SPN), 6-32 Amps, 240 volts of rupturing capacity 10kA, C series type all as per Cat No.AU10SS0323C of L&T or techno-commercially equivalent of other specified makes complete all as specified and as directed.

Supply, fix, connecting and testing MCB, Single Pole (SP), 6-32 Amps, 240 volts of rupturing capacity 10kA, C series type all as per Cat No.AU10S10323C of L&T or techno-commercially equivalent of other specified makes complete all as specified and as directed.

Supply and fix 415V 63A TPN MCCB with breaking capacity 16KA in the DB complete all as specified and directed.

Submain wiring with two single core PVC (FRLS) insulated flexible copper conductor cable of size 6 Sqmm and one single core PVC (FRLS) insulated unsheathed flexible copper conductor cable green colour of size 6.0 Sqmm as earth lead in and including PVC conduit medium grade with all fittings suitable for concealed type and making good the disturbed wall surfaces to match with existing specification all as required at site complete with all as specified and directed.

All as per item No.203 above but Sub main wiring using two runs of 4.0 sqmm wire with 4.0 sqmm earth wire complete all as specified and directed

Supply and fixed in repair bracket suitable for fixing of building security light fitting made out from 40 mm bore GI pipe, light grade 1.5 metre in length, made to shape as required, fixed to pole with MS flat iron clamp of size 25x4mm duly welded, bent to shape and making holes etc complete including necessary nuts, bolts & washer etc as required and all as specified and directed.

Taking down Ceiling fan, sealing cable end, dismantling blades and removing fan and blades and refixing ceiling fan and connecting up including provision of cable from ceiling rose or connector to fan complete all as directed

Material and labour for fabrication of iron bands,straps,supports or stays for rain water ,ventilating pipes including bolts if required hooks(stay) heavy for large gates ,hook and pintle hinges,large hasps and staples ,chains,hand made slidings bolts clamps hold fasts,wall ties hook for hanging fans,plain angles cleats for securing purlins to wood trusses or rafters ,knee piece inserts two way and three way straps plate washers and similar small articles conforming to Fe 290 Gde E-165, including clamps nuts,bold,fixing and old one complete all as specified and directed

Taking up or down steel tubing and connections including cleaning for refixing or removal of unserviceble materials out of site all as specified and directed for 25mm bore

Taking up or down steel tubing and connections including cleaning for refixing or removal of unserviceble materials out of site all as specified and directed for 40mm bore

Supply & fixing galvanized steel water tubing medium grade complete with all fittings such as bends elbows, tees, short pieces, connectors, back nuts, diminishing pieces, caps and pigs, unions etc complete of size 25mm dia.

All as per item No 210 and above but of size 40mm dia

Supply and fix gunmetal globe or gate valve with iron wheel head screwed both ends for iron pipe of size 25mm dia all as specified and directed..

Supply and fix gunmetal globe or gate valve with iron wheel head screwed both ends for iron pipe of size 40mm dia all as specified and directed..

Construction of Brick masonry valve chamber (230mm thick wall) of 900 x 900 x 900mm internal size, PCC 1:4:8 type D2 using 40mm graded stone aggregate for foundation, brick wall with sub class `B’ bricks built in CM 1:6, PCC 1:2:4 type B1 using 20mm graded stone aggregate for coping rendering in CM 1:4 15mm thick including provision of MS sheet cover 2mm thick fixed to MS angle frame made out of 40x40x4mm thick with 2 coats of synthetic enamel paint over one coat of red oxide primer to steel surfaces and locking arrangements with godrej lock including necessary excavation and earth work in any type of soil .

Cutting existing steel tubing of size 40mm/50mm dia for alterations or additions (Each cut measured) all as directed.

Screwing existing steel tubing of size 40/50mm dia for alterations or additions (or lengthening screw on pipe to form connector) all as directed.

Mavee Syndicate

UNITED TECHNO PROJECTS PVT LTD

M/s R.L.PAREEK

STANDARD AGENCIES

power links

R. Wadhumal and Sons

Sri Lakshmi Enterprises