PROVISION OF SIT OUT AREA ALTERATION TO BAR AT OFFICERS MESS

Amount

Demolition of unreinforced Cement Concrete of any description and in any position not otherwise specifically provided for complete all as specified and as directed.

Demolition of reinforced cement concrete (reinforcement cut as required to facilitate demolition) in Roofs, floors (other than ground floors), beams, staircases, landing, chajjas and similar suspended work complete all as specified and as directed.

Demolition of PCC Block masonary/walling built in cement mortar 1:6 complete all as specified and as directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed.

M&L reinforced cement concrete type B-0, 1:2:4 (12.5mm graded crushed stone aggregate) in floors after removing exsisting APP membrane including roof plaster and thoroughly cleaning by pressure water washing of old roof surface complete all as specified and as directed .

M&L precast cement concrete block masonry with PCC solid blocks in 1:3:6 type C-1 using 20mm graded stone aggregates, exc. 10cm in width and set in 1:4 complete all as specified and directed.

Providing and fixing in position, 100 mm thick factory made Expanded Polystyrene Core (EPS Core) wall panels consisting of EPS core sandwiched between two Engineered sheets of welded wire fabric mesh duly finished with shortcrete materials on outer faces. The fabric mesh shall be made of 3 mm dia zinc coated G.I. wire mesh with 50 mm pitch in both the directions and on both faces of the wall and connected by GI wire of 3mm dia at alternate row by welding. The EPS core shall consist of 50 mm thick EPS of density not less than 16 kg/ per cum. Both the outer faces of the panel shall be finished by applying the layer of 25 mm thick cement mortar 1:3 {1 cement: 3 coarse sand (not having more than 40% stone chips of size upto 6 mm)} with the help of shotcreting/guniting equipment etc at a pressure not less than 1 bar (100KN/m2) and both surfaces finished with trowel. Fixing operations of wall panels shall be completed in all respect as per drawings and specifications and under the overall direction of the Engineer-in-charge. NOTE: The work against this item shall be got executed through OEM or his authorised executing agency after approval of GE. The contractors shall submit test reports and manufacturers certificate for materials, concrete mix design details etc and the cost the same shall be borne by the contractor. Make : ALPHA PEB/RAPIDCON/JSW/SRISTI VENTURES

M&L for Reinforced cement concrete M-30 (design mix) in Beams, cantilevers, bressumers, lintels over 1.5m span, complete all as specified.

M&L for form work to sides and soffits of rough finished floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs,etc alos splays between floors, and beams,etc compelte all as specified and as directed by Engineer in Charge.

M&L for TMT bars 10mm dia and over as in reinforcement cut to length, bent to shape required including cranking hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia or securing clips.

Description all as per item No 10 above but 6 mm to 8mm dia.

M&L for TMT bars 5mm dia and over upto and incl 10mm dia in stirrups, spacers, and binders in reinforcement cut to length, bent to shape required including cranking hooking ends and binding with mild steel wire.

M & L for rendering 10 mm thick in cement mortar 1:6 finished even and smooth without using extra cement etc complete.

M & L for rendering 5 mm thick in cement mortar 1:4 with WPC over and including backing coat of 10 mm thick in cement mortar 1:6, finished even and smooth without using extra cement etc complete. Note: WPC will be measured and paid as supply only.

Supply only Liquid water proofing compound complete all as specified and as directed by Engineer-in-Charge.

S&F Pre-painted galvalume aluminium zinc coating GI based (corrugated/semi corrugated) sheet 0.50mm thick as per approved profile, coloured, having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws all as specified.

S&F Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified.

M & L for structural steel works in tubular trusses including special shaped washer etc. Complete using ERW or induction butt welded tubes conforming to IS 1161-1979 grade st-240, Complete all as specified and directed.

S & F for Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment, Fe 410-W (Gde-E-250) quality-B,etc complete all as spd and directed.

M&L for Cutting channels, grooves or rebates n exc 15cm girth, and trimming surface of concrete walls, concrete blocks, slabs, brickwork or stone masonry, With or with out reinforce ment etc. and making good by filling with necessary cement mortar complete all as specified.

M&L for preparation of new steel surfaces and applying two coats synthetic enamel (ordinary tint) over and including a coat of red oxide primer to surfaces of any description, when unconnected with other painting or when painted in a different tint etc completed all as spd and directed.

M& L for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces.

M&L PVC half rounded gutter pipes of dia 140mm, complete all as specified and as directed by Engineer-in-Charge.

M&L PVC rounded downtake pipes of dia 110mm, complete all as specified and as directed by Engineer-in-Charge.

M&L PVC rainwater stop end outlet (connecting pipe b/w gutter pipe and downtake pipe) of size 140mm, complete all as specified and as directed by Engineer-in-Charge.

M & L for Granite (of any type) tiles 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polish over and including screed bed or bedding layer of 20 mm thick in CM 1:6 for laying floor finishes, staircases, etc completed all as specified.

M & L for Granite (of any type) tiles 20mm thick machine cut, in skirting/ dado laid over cement screed and jointed with grey cement slurry, and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete, etc completed all as specified.

M&L Machine cut kota stone slab flooring 18-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing over and including screed bed or bedding layer of 20 mm thick in CM 1:6 for laying floor finishes, staircases, etc completed all as specified.

M&L Kota stone slab 18-25mm thick in riser of steps, skirting, dado and pillar laid over cement screed and jointed with grey cement slurry mixed with pigment to match the shade of the slab over 10mm thick rendering in CM 1:4 fiished even & rough to receive tiles including rubbing and polishing, etc, complete all as specified.

M&L for Seamless calcium silicate ceiling made out of 1800 x 1200 mm size board of siliceous and calcareous material reinforced with cellulose fibre fixed to the ceiling/truss section using GI wire with 25 mm long self drilling and tapping screws having phillips head with under head cutter at 200 mm centre to centre, including finshing the joint of face board with specially formulated jointing compound and 48 mm wide fibre tape to provide seam less finish incl frame work for ceiling and OBD painting in celing with 2 coats of distemper over a coat of primer incl preparation of false ceiling surfaces as all directed and specified by Engr-In-Charge. Make- EVEREST/ARMSTRONG

S&F of light/dark shade Vitrified Ceramic tiles light shade 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, all as specified and as directed by Engineer-in-Charge. Make- Kajaria/Johnson/Orient

S&F of light/dark shade Vitrified Ceramic tiles light shade 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in vertical surfaces etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including a rendering of 10mm thick CM 1:4, all as specified and as directed by Engineer-in-Charge. Make- Kajaria/Johnson/Orient

M&L for preparation of new surface/undecorated surfaces of walls and applying two coats of Oil bound distemper over a coat of primin incl 3mm thick wall care putty on plastered and other surfaces with alkali resistant priming paint complete all as specified.

M&L for Cool Roof SRI tiles (White colour, matte finish) of size 300mm x 300mm x 10mm thick set in CM 1:4 over 15mm screed bed in 1:6 in roof surfaces, etc., incl, cleaning of surfaces, cutting, jointing filling using Dr. Fixit tile joint filler (404 FEVIMATE TG) or by Granule Mix with 1:1 or equvalent ratio with white cement as recommended by manufacturer, complete all specified and directed. Make- johnson Endura/Orient cool tiles

Providing and fixing factory made uPVC white colour Sliding window Three track made of extruded profiles with wall thickness of 2.3mm (+ -0.2mm). Window profile with hollow section with multi chamber. Frame (88mm x 52mm), sliding sash (42mm x 67mm). Sliding mesh Sash (42mm x 57mm) Sliding interlock (One vertical length in each shutters) (45.5mm x 28mm), Glazing bead (24.5mm x 16mm) will be miterd cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket, 1.2+ -0.2mm thick galvanised steel Frame (30mm x 18mm) 2 nos, sliding sash (30mm x 18mm), sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, Hardware [Touch Lock of zinc alloyed (white powder coated), steel roller system. Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aparture 1.40mm and required accessories. (Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net Opening will be measured for payment purpose) (B) Area exceeding 2.00 sqm each.

Supply and fixing factory made uPVC door frame made of uPVC. extruded sections having an overall dimension (extruded section profile) 48x40 mm (tolerance ± 1 mm), with wall thickness 2.0 mm (± 0.2 mm), corners of the door frame Jointed with galvanized brackets and stainless steel screws, joints mitred and Plastic welded. The hinge side vertical of the frames reinforced by galvanized M.S. tube of size 19 X 19 mm and 1mm (± 0.1 mm) wall thickness and 3 nos. stainless steel hinges fixed to the frame complete all as specified by the manufacturer and as per directions of Engineer-in-charge.

Supply, and fixing 30 mm thick factory made Polyvinyl Chloride (PVC) door shutter made of styles and rails of a uPVC hollow section of size 60x30 mm and wall thickness 2 mm (± 0.2 mm), with inbuilt decorative moulding edging on one side. The styles and rails mitred and jointed at the corners by means of M.S. galvanised/ plastic brackets of size 75x220 mm having wall thickness 1.0 mm and stainless steel screws. The styles of the shutter reinforced by inserting galvanised M.S. tube of size 25x20 mm and 1 mm (± 0.1 mm) wall thickenss. The lock rail made up of 'H' section, a uPVC hollow section of size 100x30 mm and 2 mm ( + 0.2 mm) wall thickness fixed to the shutter styles by means of plastic/ galvanised M.S. 'U' cleats. The shutter frame filled with a uPVC multichambered single panel of size not less than 620 mm, having over all thickness of 20 mm and 1 mm (± 0.1 mm) wall thickness. The panels filled vertically and tie bar at two places by insering horizontally 6 mm galvanised M.S. rod and fastened with nuts and washers, complete as specified by the manufacturer and as per directions of Engineer-in-charge.

Supply and Fixing 10-12 mm thick Toughened glass door, superior quality exc 1.5 sqm in each pane including necessary fittings and fixures, mortice lock, beading screws, bearings, 600mm long and 25mm dia stainless steel handles - 2 Nos in each door etc including Air force embalams/writing work as per design given by Engr-in-charge and as required eitching, cutting for counter etc. Fitting and fixtures as required including fixing details shall be as per manufactures detsils etc. complete all as specified and as directed by Engr-in-charge.

Dismantling of old MS railing tubes connected to parapet wall by cutting/removing connections, all as specified and directed by Engineer-in-charge.

Material & Labour for providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement.

M&L 19mm Prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws anti termite plywood for cabinet boxes and shutters purpose incl cutting, joining, etc & making good, as specified and as directed by Engineer-in-Charge.

M&L modular hinges of any degree opening, as specified and as directed by Engineer-in-Charge.

M&L 20mm width PVC edge band tape for cabinet purpose, complete all as specified and as directed by Engineer-in-Charge.

S&F of modular Stainless steel handles of 4 inch size for cabinet purpose, complete all as specified and as directed by Engineer-in-Charge.

S&F Stainless Steel Door Catcher for cabinet purpose, complete all as specified and as directed by Engineer-in-Charge.

M & L point wiring with 1.5 sqmm nominal cross sectional area, single core, 1100 Volts FRLS grade, stranded, PVC insulated, unsheathed copper conductor cable drawn through PVC concealed conduit of suitable size, complete with all PVC conduit accessories/ fittings, brass screws, washers etc, incl steel terminal boxes and modular switches & modular cover plates including all cutting/chases etc in walls and including continuous earth wire of size 1.5 Sqmm nominal cross sectional area, single core, PVC insulated copper conductor cable, unsheathed and connected to common earth and earth dolly complete all as specified and directed for the One light point /Fan point controlled by one switch.

Description all as per item No 46 above but One 5 Amps socket point on same board with other switches

Description all as per item No 46 above One 5 Amps socket point on independent board.

Description all as per item No 46 above above but wiring complete with 2.5 Sqmm for 3 pin 15A socket multipurpose on independent board .

Description all as per item No 46 above but wiring complete with 4.0 Sqmm for 3 pin 15/30 A socket multipurpose on independent board for AC point.

Material and Labour for ceiling rose 3 terminals complete all as specified and directed.

Supply & fixing modular switch 06 Amps 1 module in replacement of old u/s complete all as specified & directed.

S & F modular socket 06 Amps 2/3 pin combined 2 module in replacement of old u/s complete all as specified & directed.

Supply & fixing modular switch 16 Amps 1 module in replacement of old u/s complete all as specified & directed.

S & F modular socket 06/16 Amps 2/3 pin combined 2 module in replacement of old u/s complete all as specified & directed.

Supply and fixing 34/36 W LED Fitting, 2 x 2 recess / Surface LED flat panel with high brightness LED for glare free homogenous illumination including LED driver complete all as specified. (Make : Havells / CG / Bajaj)

Supply and fixing 6 Watt LED round / square type false ceiling fitting down light with high efficiency LED ideally suitable for low ceiling area to give glare light suitable for ceiling cut 95 mm dia complete all as specified. (Make : Havells / CG / Bajaj)

Supply and fixing LED flood light 120 watt 230 V AC outdoor type with thermal management in multiple optics and equipped with IP66 protection, with impact and corrosion resistant complete with driver and lamp complete all as specified and directed. (Make : Havells / CG / Bajaj)

Supply and fixing wall fan of single phase 230/240V of size 400 mm sweep and grouting with nut , bolts & Fastenar on the wall and make good the disturbed surface and electric connection with 1.5 Sqmm three core PVC insulated round flexible copper conductor and sheathed cable complete all as specified and directed . (Make : Havells / CG / Bajaj)

S & F MCB SPN 40-63 Amps, 'C' series, 240 V complete incl making conections all as specified and directed. Make : Havells /Standard / C&S/Indoasian

S & F MCB SP 6-32 Amps, 'C' series, 240 V complete incl making conections all as specified and directed. Make : Havells /Standard / C&S/Indoasian

S & F MCB TPN 63 Amps, 'C' series, 240 V complete incl making conections all as specified and directed. Make : Havells /Standard / C&S/Indoasian

S & F MCB DB TPN 4Way, Double Door flush to wall including all cutting etc on wall including making good the disturbed surfaces to match the existing in replacement of old U/s complete all as specified and directed. Make : Havells /Standard / C&S/Indoasian.

M & L for sub main wiring complete with four runs of 6 Sqmm single core FRLS grade PVC insulated unsheathed cable 1100Volt grade multistranded copper conductor drawn through and including PVC conduit and accessories surface on wall, roofs etc with two run of PVC insulated solid copper conductor 6 Sqmm single core as earth continuity conductor connected with earth dolly and mains complete all as specified and directed.

M & L for sub main wiring complete with two runs of 4 Sqmm single core FRLS grade PVC insulated unsheathed cable 1100Volt grade multistranded copper conductor drawn through and including PVC conduit and accessories in surface of wall, roofs etc with one run of PVC insulated copper conductor 4 Sqmm single core as earth continuity conductor connected with earth dolly and mains complete all as specified and directed.

S&F in replacement double pole and neutrial enclosure with two pin and earth plug and socket including 1Nos MCB 20Amps capacity complete all as specified and directed by Engr-in-charge . Make : Havells /Standard / C&S/Indoasian

Supply and Fixing GI Earth wire 4.00 mm dia for interconnecting of earth Electrodes all as specified.

Supply and fixing in repair of Earthing to panel with galvanised steel earth plate electrode 60cm x 60cm x 6mm thick, buried directly in ground (earth pit not less than 2.25m below normal ground level) with top edge of earth plate not less than 1.5m below normal ground level connected to galvanised earth lead wire 4.0mm dia by means of bolts, nut, check nuts and washers of galvanized iron or steel all as shown in electrical plate No.3 of MES Schedule pt-I 2009, GI earth lead strip protected by GI pipe 20 mm dia light grade and connected to earth test point including excavation in any type of soil,returning filling, disposal of soil, providing charcoal dust and common salt upto top edge of earth plate, construction of PCC pit with RCC cover, funnel, watering pipe of 20mm dia GI light grade and provision of earth test point including testing on completion complete all as specified and directed.

Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, in soft/loose soil, complete all as specified and directed.

M&L for PCC 1:2:4, type B1 using 20mm graded stone aggregate as in pillars and post concrete, complete all as specified and directed.

M&L for PCC 1:4:8, type D2 using 40mm graded stone aggregate as in foundations, filling and mass concrete, complete all as specified and directed.

S&F Structural steel works as roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat section) including distance pieces, cleats etc conforming to Fe-410-W (Gde-E-250) quality A, Complete all as specified and directed.

M&L for Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment Complete all as specified and directed.

M&L for painting new steel surfaces of any description incl preparation, priming with red oxide zinc and two coat synthetic enamel paint, width or girth over 10cm, not otherwise described, complete all as specified and directed.

M & L for sub main wiring complete with two runs of 1.5 sqmm FRLS grade PVC insulated unsheathed cable 1100Volt grade multistranded copper conductor drawn through and including PVC conduit and accessories in recessed / surface of wall, roofs etc with one run of PVC insulated copper conductor 1x1.5 Sqmm single core as earth continuity conductor connected with earth dolly and mains complete all as specified and directed.

S&F PVC rectangular block for mounting, switches, sockets fan regulator etc. with 3 mm thick plastic laminated sheet cover of size 175 x 100 and 50 mm deep complete all as specified and directed.

S&F LED PC batten light fitting of 4 feet 20 watt, with energy efficient LED and integrated electronic driver of 20W fitting including connecting up with three core flexible copper conductor upto ceiling rose complete all as specified and directed . Make : Bajaj /CG/Philips/Havells

S & F MCB DB SPN 4 Way with 200 Amps rated busbar, Double door, 240 volts flush to wall including all cutting etc on wall and making good the disturbed surfaces to match the existing complete all as specified and directed.

S&F LED bollard in cylindrical shape with opal acrylic di user and IP 66 protection of cap 9 watt including necessary form work/PCC work complete all as specified and directed.

S & F MCB SPN 32 Amps, 'C' series, 240 V complete incl making conections all as specified and directed.

B5BUILDING SOLUTIONS

PRAGATHI BUILDERS

VARALAKSHMI CONSTRUCTIONS