Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹42.3 LAccepted-AOC | L1 | Accepted-AOC Accepted | |
| 2 | L2₹43.2 L+₹44,831 (1.05%)Rejected-AOC 451 NEAR RADHA KRISHAN MANDIR VPO MAMUN PATHANKOT 145001 PB | PATHANKOT | PATHANKOT | PUNJAB | 145001 | L2 | Rejected-AOC Rejected | |
| 3 | L3₹44.0 L+₹1.2 L (2.87%)Rejected-AOC | L3 | Rejected-AOC Rejected | |
| 4 | L4₹44.4 L+₹1.7 L (4.02%)Rejected-AOC VILL BUNGDAL DADHANI P O BADHANI DISTT PATHANKOT PIN 145001 | PATHANKOT | PATHANKOT | PUNJAB | 145001 | L4 | Rejected-AOC Rejected | |
| 5 | L5₹45.4 L+₹2.7 L (6.20%)Rejected-AOC H NO B III 95 MOHALLA GHARTHOLI MISSION ROAD PATHANKOT 145001 PB | PATHANKOT | PATHANKOT | PUNJAB | 145001 | L5 | Rejected-AOC Rejected |
Tender Value
₹45 L
EMD Value
₹90,000
Closing Date
20 Feb 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Garrison Engineer(N) Mamun
Garrison Engineer(N) Mamun Pin-145001
ANNUAL COMPREHENIVE MAINT OF JCOs/ ORs MD ACCN OF BHATTACHARJEE ENCLAVE UNDER AGE B/R-II OF GE(N) MAMUN
2023_MES_575585_1
GE(N)/M-62/2022-23
Open Tender
Civil Works - Lift Irrigation Schemes
Item Rate
180 days
Garrison Engineer(N) Mamun
Please refer Tender documents.
9 documents required · 9 mandatory
₹500
Garrison Engineer(N) Mamun
₹90,000
13 Mar 2023
18 Jan 2023
22 Feb 2023
18 Jan 2023
20 Feb 2023
8 Feb 2023
Amount
Taking down chowkhats of frames n.exc 1.50 sqm each with shutters (without taking off shutters from the frames) complete all as specified and directed.
All as per Srl Item No 1 here-in-before, but exceeding 1.5 Sqm and n.exc 4 Sqm.
Taking down shutters of any description n exc 1 Sqm each including removing to or from store complete all as specified and directed.
Taking down shutters of any description exc 1 Sqm but n exc 2 Sqm each including removing to or from store complete all as specified and directed.
S&F 35mm thick 2nd class hard wood glazed and skeleton shutters, open rebated and prepared to receive glass or gauge etc ( divided into squares with plain chamfered or rounded , mitred and rebated sash bars, any numbers), edges of framing plain chamfered or rounded fitted with cut and mitered beads and fitted to chowkats for securing glass/gauge size of stiles rails and other parts as per clause 8.24 (a) of SSR Part-I complete all as specified and directed.
S&F 35mm thick factory made plain framed panelled shutters of 2nd class hard wood two panel with lock rail and panel of 9mm thick BWP commercial ply. The size of rail and stile as per IS-1003 (Part-I) Kiln seasoned and chemically pressure treated factory made shutters wood is to be incorporated complete all as specified and directed.
S&F factory made solid PVC moulded door shutter with wood free EPS 28 to 30mm thick (Stile) with 2,4 or 6 raised panel design with 2mm thick moulded PVC sheet on the front face & 2mm plain colour PVC sheet on back face complete all as specified and directed.
S&F Soild PVC door frame wood grain color coated of size 50mm x 95mm made out of 5mm wood grain colour PVC sheet reinforced with MS Sqaure tube , supply and fixing in opening as per specification & drawing
S&F pressed steel frame made out of MS sheet 1.25mm thick of size 125x 60 mm for doors/ windows with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc complete all as specified and directed.
All as per item 9 but size 105x60 mm.
M&L for PCC 1:3:6 type C-0 using 12.50mm graded crushed stone aggregate as in back filling of chowkhat complete all as specified and directed.
S&F Box type Steel windows comprised of tubular frame and shutters made out of 1.25mm thick MS steel tube factory made with double side shutters wire gauged shutter & glass glazed shutter (wire and glass panes shall be measured and paid separately) with side hung shutters with steel handle and steel peg stay dovetailed ot welded including 2 Nos tower bolts 150mm long for each leaf and 8mm square bar grills at spacing as shown on drg welded to FI frame work , including other fittings ,hinges ,handles tarred hold fasts PCC blocks including two coats of synthetic enamel paint over a shop coat of red oxide primer etc. all as shown on drg No CEPZ /TD-354/09 sheet 1/3 to 3/3 complete all as specified and directed.
S&F in repairs 100 mm long Butt hinges, medium weight, cold rolled stainless steel, and fixed complete all as specified and directed.
S&F for aluminium anodized barrel tower bolts 150 mm of extruded section and fixed complete all as specified and directed.
S&F 150 mm size aluminium alloy handles, febricated type extruded section, ISI marked complete all as specified and directed.
M&L for Preparation of new or previously untreated Steel surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint complete all as specified and directed.
M&L for preparation new or previously untreated wood or wood based surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.
S&F Mild steel sliding door bolts (ISI Marked) 250mm long, plate type, stove enameled black, with bright bolt not less than 12mm dia with & including a minimum of 6 bolts & nuts, four on bolt plates and two on staple plate complete all as specified and directed.
S&F Mild steel barrel tower bolts stove enameled black with bright bolts of length 150mm ISI Marked complete all as specified and directed.
S&F Mild steel sliding door bolts (ISI Marked) 250mm long, plate type, stove enameled black, with bright bolt not less than 12mm dia with & including a minimum of 6 bolts & nuts, four on bolt plates and two on staple plate complete all as specified and directed.
S&F 3mm thick sheet glass ordinary quality and glazing with oil putty or fixed with bead/glazing pins in squares any size in each pane complete all as specified and directed.
Hacking out old broken glass ( any thickness , size, quality, or description) from wooden frame glazed with putty or fixed with beads, rubbish off the premises complete all as specified and directed.
S&F in repair stainless steel wire cloth 0.38 mm nominal dia of wire and average width of aperture 1.40 mm fixed with tinned tacks, or galvanized wire staples complete all as specified and directed.
S&F stainless steel wire cloth 0.38 mm nominal dia of wire and average width of aperture 1.40 mm fixed with tinned tacks, or galvanized wire staples complete all as specified and directed.
Taking down cement plaster on brick walls or stone w alls any descrition etc including raking out joingts, hacking for key, scrubbing down with water etc, rubbish off the premises complete all as specified and directed.
M&L for 10mm thick plastering in CM 1:6 on faces of brick work , concrete or fair faces surfaces finished even and fair without using extra cement complete all as specified and directed.
M&L for 15mm thick (10+5mm thick) rendering in CM 1:4 on fair faces of brick work or concrete surfaces finishing the surfaces even and smooth without using extra cement and external layer of rendering shall be mixed with WPC as per manufacturer's instructions complete all as specified and directed. (Note: WPC shall be measured and paid seperately)
M&L for 10mm thick plastering in CM 1:3 on concrete surface of ceiling, chajja etc finishing the surfaces even and smooth without using extra cement complete all as specified and directed.
M&L for 5 mm thick plaster in CM 1:3 on faces of brick work or concrete surfaces as in ceiling finished even and fair without using extra cement complete all as specified and directed.
Supply only liquid water proofing compound.
M&L for glazed ceramic coloured tiles in vertical surface 450x300x7mm thick set and jointed (joint free) in neat cement slurry and pointed in white or coloured cement to match over 10mm thick screed bed or bedding layer of mortar in CM 1:4 including dismantling existing tiles including bedding layer of mortar, removal of rubbish complete all as specified and directed
All as per item 31 but for non skid ceramic coloured tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm.
All as per item 32 but for area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm
All as per item 31 but vitrified tiles light shade 10 mm thick ( Square or rectangular) polished, area of each tile n. exc 0.36 sqm.
M&L for vitrified tiles light shade 8-10 mm thick ( Square or rectangular) polished, area of each tile n. exc 0.36 sqm in floors etc set and jointed (joint free) in neat cement slurry and pointed in coloured cement to match laid over 15mm thick screed bed or bedding layer of mortar in CM 1:6 including dismantling existing tiles including bedding layer of mortar, removal of rubbish complete all as specified and directed
All as per item 35 but for non skid ceramic coloured tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm.
All as per item 36 but for area of each tile exc 0.11 sqm but not exceeding 0.18 sqm.
M&L for three coats of white wash on newly plastered surface of walls including preparation of surfaces complete all as specified and directed.
M&L for wall care putty to obtain smooth and even surface in any number of coat (thickness not exc 1mm thick) complete all as specified and directed.
M&L for preparation of new plastered surface of wall making the surface smooth and applying two coats of oil emulsion distemper complete all as specified and directed.
M&L for preparation of new plastered surface of external wall and chajjas and making the surface smooth with sand paper, priming surface with alkali resistance primer and applying two coats of cement base paint including curing complete all as specified and directed.
M&L for two coats of white wash on surface of ceiling including preparation of new plastered surface complete all as specified and directed..
Taking up or down 15mm bore steel water tubing and connections including cleaning for refixing or removal to store for bore of pipe complete all as specified and directed.
All as per item 43 but 20mm bore.
S&F 15mm bore tubes medium grade galvanized ISI marked with all fittings, short pieces and fixed complete to walls, floor, ceiling etc complete all as specified and directed.
All as per item 45 but 20mm bore.
Fixing only the 15mm bore tubes medium grade galvanized ISI marked with all fittings short pieces to walls, floor, ceiling etc complete all as specified and directed.
All as per item 46 but 20mm bore.
S&F Ball valve high pressure of PTMT with epoxy coated alum rod & high density plastic ball screwed for iron pipe and fixed (minimum weight 20mm -210 gms) complete all as specified and directed.
S&F in repair 15mm bore dia Bib taps cast copper chromium plated fancy type alloy ISI marked with crutch or butter fly handles screwed down screwed for iron pipe complete all as specified and directed.
S&F in repair 15mm bore dia angle valve / stop valve cast copper chromium plated fancy type alloy ISI marked with crutch or butter fly handles screwed down screwed for iron pipe complete all as specified and directed.
S&F in repair 15mm bore dia concealed type angle valve / stop valve cast copper chromium plated fancy type alloy with long shank and cup ISI marked with crutch or butter fly handles screwed down screwed for iron pipe complete all as specified and directed.
S&F in repair 20mm bore dia gun metal globe or gate valves with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed
S&F in repair Vitreous china wash hand basin, white flat back, size 550x400 mm including waste pipe , brackets, CP waste coupling and cutting for and pinning in ends of brackets or errecting stand and 32mm dia waste pipe complete all as specified and directed.
S&F in repair 15mm bore dia pillar tap chromium plated screwed down, high pressure screwed for iron pipe complete all specified and directed
S&F PVC shelf (as per sample) of PTMT fixed with and including chromium plated brass screws and wooden and plastic cleats ( min wt 300 gms) complete all as specified and directed.
S&F in repair grating 100 mm dia of PTMT. (Minimium weight 25gms) complete all as specified and directed.
S&F for 18 to 20 mm thick PVC prelaminated solid board with one side decorative choice laminate and other side balancing white and with weight of sheet not less than 9kg per sqm as in kitchen cabinet, cupboard etc fixed with screws to steel/timber frame work etc complete all as specified and directed.
S & F Continuous (piano) hinges width of flap is 30 mm, stainless steel, complete all as specified and directed.
S&F in repair Magnetic catcher (as per sample) for shutter fitted with suitable screws complete all as specified and directed.
S & F in repairs PVC waste pipe 32 mm dia for wash hand basin and urinal complete all as specified and directed.
S & F in repair PVC connection 15 mm size with PTMT nuts or length 450 mm complete all as specified and directed.
S&F in repair PVC flushing cistern 10 ltr capacity including PVC connection inlet and and outlet connections,brackets, PVC flush pipe with bend 32 mm dia of suitable length including making necessary connections to water supply pipe line and jointing to WC complete all as specified and directed.
S&F in repair vitreous china, squatting from Pan 'Orissa' pattern 'white' size 580mm x 440mm white with integral footrest including provision of lean concrete 1:5:10 type E2 (using 40mm graded stone aggregate) bedding, connection to drain out pipe and to flush pipe anti syphonage pipe etc including making good to floor where required complete all as specified and directed.
S&F Vitreous china wash down water closet pan pedestal pattern , white (excluding supply of flushing cistern and flush pipes, but including fixing thereof), making connections to trap and to flush pipe including plastic seat and cover (as per sample) with stainless steel or aluminised hinging device and fixed in repair complete all as specified and directed.
Taking down brick tiles ,terracing tiles, single layer from roof laid, bedded and pointed in any mortar and removal complete all as specified and directed.
Demolition of cement concrete (unreinforced) of any description and in any position not specifically provided for and removal of rubbish complete all as specified and directed.
M&L for 40mm thick PCC tiles of size 300x300x20mm, laid on 15mm thick bedding layer of mortar in CM 1:6, joints grouted flush in cement mortar (1:3) mixed with 5% of crude oil by weight of cement over complete all as specified and directed.
All as per item 68 but except tiles (using serviceable brick tile) complete all as specified and directed.
M&L for PCC 1:2:4 type B-0 (using 12.50 mm graded stone aggregate as in padding, surface finished even and smooth without using extra cement complete all as specified and directed.
M&L for 20mm thick cement plaster in cement mortar 1:4 on concrete surface finished even and smooth mixed with WPC liquid as per manufacturer's instruction or @ 0.200 ltr in 50 Kg of cement complete all as specified and directed.
M&L for APP modified roof treatment over existing accessible RCC roof slab / chajjah / canopy / parapet wall to be executed through approved applicator of the membrane manufacturer with following specification etc complete all as specified and directed :- (a) Cleaning existing surface properly. (b) Applying oil bound bitumen primer @ 0.30 liter/Sqm manufacture by the same agency as that of APP with a density 0.87-0.89 Kg per liter at 25 degree centigrade on prepared surface. (c) Laying not less than 3mm thick APP modified water proofing membrane weighing not less than 3.60 Kg/Sqm reinforced with non woven polyster fiber weight not less than 160gsm/Sqm using butane torch by torch application with 10cm side laps and 15cm end lap
All as per item 72 but for non-accessible RCC roof, top of membrane shall be provide with solar reflective bituminous aluminum paint @ 0.1 Kg/Sqm as prescribed by manufacture of membrane.
Dismantling of water tank RCC/HDPE/Ferrocrete of size exceeding 250 Ltrs to 500 Ltrs capacity complete all as specified and directed.
All as per item 74 but capacity exc 500 Ltrs but n exc 1000 Ltrs
S&F two layered ISI marked rotational moulded polytheline water storage tank 500 Ltrs capacity ( cylinderical / vertical with closed top) hoisted and fixed in position complete all as specified and directed.
All as per item 76 but capacity 1000 Ltrs
S&F in repair towel rail CP 600 mm long (as per sample) complete all as specified and directed.
S&F in repair over head shower 125mm (as per sample) size for 15mm bore pipe, cast copper alloy chromium plated fixed in repairs of complete all as specified and directed..
S&F in repair 20mm bore Mild steel powder coated, single curtain rod (wall thickness not less than 1mm) including fancy type PVC powder coated brackets, finials (as per sample) etc suitable for single curtain rod, fixed in repair, etc complete all as specified and directed.
M&L for Eco 4000 Series Windows fabricated from roll formed sections made of Galvanized Steel Colour Coated/Powder Coated (Base Steel as per IS 513 “D” quality, Galvanized as per IS 277 with Zinc of 120 grams/Sq. Mtr.) with total coated thickness of 0.60 mm. Coated Sections should be with Primer Coat of Epoxy Primer of 5-7 microns thick, finish painted with Polyester Paint of 12-16 microns thick and back coated with Alkyd backer of 5-7 microns, or Powder Coated with pure Polyester Powder up to 50-60 microns thick. Section for frame should be 48mm x 50mm, Section for Mullion should be of 48mm x 50mm, Section for Glazed Shutter Frame should be of 47mm x 20mm, and Section for Fixed Glass Bead should be of 12mm x 12mm. Frame and Shutter Frame Sections should be cut to length and metre joined with Polypropylene Corner Brackets. Mullion Section should be joined with Frame/Mullion using Nylon Mullion Cap. Ethyl Propylene Diamine Monomer (EPDM) Gasket should be used all around glass in shutter. Each Glazed Shutter should be provided with S.S. Pivot Hinges-1set, Seccolor Handle & Seccolor Stay. Window Frame should be fixed to brick/concrete masonry by using Nylon self expanding caps and driving MS electroplated 80mm long screws into the caps through frames. :Glass shutter & Fixed Glass portions should be provided with a glass of 5 MM Plain Float Glass. Windows should be provided with Grill made of 10mm sq. MS Bars welded to at 150mm center-to-center, 6mm x 12mm MS flat. Total grill unit should be powder coated and fixed to window frame with screws Mesh Shutter should be provided with a Stainless Steel 32 gauge Fly mesh of 304 grades with 144 holes per square Inch. Note: Quoted rate shall deemed to included all glass and wire mesh, making good of window cill,soffit, jamb in and out from pcc or brick work as per existing.
S&F 150 to 250 mm MS helical door spring for door closer complete all as specified and directed.
M&L for Granite (as per sample) work 16-18mm thick (table rubbed and polished) in steps, jambs, pillars, steps, window cills, cooking plateform and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade of granite including dismantling of existing stone slab with bedding layer of mortar, removal of rubbish complete all as specified and directed.
S&F in repairs stainless steel kitchen plate rack of size 750 x 900 mm of approved make fixed with mild steel screw complete all as specified and directed.
S&F in repairs 100mm dia CI bends (any radius) diminishing pieces or tapers (larger bore measured) complete all as specified and directed.
All as per item 85 with with oval access door.
All as per item 85 but for 75mm bore pipe with oval access door.
S&F CI floor trap 75mm with grating including jointing to waste pipe fixed in cement concrete 1:2:4 type B-1 using 20mm graded stone aggregate with CP grating complete all as specified and directed.
S&F Cast iron waste and vent pipes sand cast 100mm dia bore in any length with or without ears with cement joints fixed to walls with all fittings including taking down the unservicable pipe with fitting complete all as specified and directed.
All as per item 90 but 75mm bore pipe.
S&F CI branch pipece single of 100mm bore or with parallel branches complete all as specified and directed.
All as per item 92 but 75mm bore pipe.
S&F sinks with drainage board made of stainless steel 1mm thick kitchen with plugs, washers and wastes; including 15mm thick bedding layer of mortarin CM 1:6 on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 915x460mm bowl size 410mm x 330mm x 160mm complete all as specified and directed.
M&L for 75mm thick PCC type C-1, 1:3:6 (using 20mm graded stone aggregate) as in plinth protection and paving laid in slope finished even and fair including making joints at every 2.5 m and at corner filled with bitumen 85/25 and sand in ratio 1:2 by weight and complete all as specified and directed.
M&L for 10 mm thick cement plaster in cement mortar 1:3 on brick or concrete surface of sunken floor finished even and smooth using WPC liquid of make Dr. Fixit or STP as per manufacturer instruction or @ 0.200ltr in 50 Kg of cement complete all as specified & directed (WPC shall be measured and paid separately)
M&L for bitumen blown any grade, applied hot, two coats, to concrete/plastered surfaces at the rate of 1.5 Kg per sq m per coat and applying polythene film black, 50 micron complete for sunken floor slab and embedded in side wall / covered fillet complete all as specified and directed.
M&L for PCC type B-1, 1:2:4 ( using 20mm graded aggregate) as in sub floors for laying floor finish in sunken floor complete all as specified and directed.
M&L for PCC 1:5:10 type E2 using 40mm graded stone aggregate as in sunken floors, filling as mass concrete complete all as specified and directed.
M&L for Sand filling under floors or in foundation including watering and consolidation complete all as specified and directed.
M&L for PCC type D-2,1:4:8 (40mm graded stone aggregate) as in subbase, rough finished surface complete all as specified and directed.
M&L for PCC Type B-1 (1:2:4), 20 mm graded stone aggregate as in coping, benching and the like including necessary form work complete all as specified and directed .
M&L for coloured glossy finish Machine pressed precast concrete interlocking paver block any shape and conforming IS 15658-2006 of 60mm thickness M-35 grade complete all as specified and directed.
Deduct Total amount of SCHEDUL 'A' SECTION-II (SCH OF CREDIT) Rs 39,155.00 ( to be deducted from Schedule ‘A’ (BOQ) to arrive at the Contract Sum.
RD Engineers
RAJBEER ENGINEERS
M/S CANTILEVER ENGINEERS
M/S HIMANSHU BUILDERS
M/s Rajeev Vashist
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .